Why we are not using "Message Control" for Master data ?

Hi friends,
We are using Message control as output determination for Transactional data, what is the main reason for not using the msg control for Master data.Please explain with details...
I am very thankful to them...
Thanks and Regards.
Naveen Kumar. Chamala

Hi Naveen,
   Listing down those I know -
   1. Master data is expected to be changed/created less frequestly.
   2. Transactional data is expected to be chnaged/created more frequestly.
   3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
   4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
   5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev

Similar Messages

To transfer the data Cross the systems why we are not using BAPI Method?

Hello All,
To transfer the data Cross the systems why we are not using BAPI Method? why we are using only ALE/IDoc's?

Hi Naveen,
   Listing down those I know -
   1. Master data is expected to be changed/created less frequestly.
   2. Transactional data is expected to be chnaged/created more frequestly.
   3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
   4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
   5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev

Why exceptions are not using in BAPI

Hi,
I would like to know why exceptions are not using in STANDARD bapi.Is there any reason for this.
Please explain me clearly
Thanks in advance
Thanks and Regards,
Venkat

Hi,
If the exception is being handled by the caller, meaning that the exception is listed in the EXCEPTIONS section of the
funciton call, then the program will handle it gracefully and continue processing,if it is not in this section of the
funciton call, and it is raised inside the funciton module,
it will issue an ABAP dump and end. This is true for
foreground processing as well as background processing.
https://forums.sdn.sap.com/click.jspa?searchID=12141509&messageID=5433799
Regards
Kiran Sure

Why Interceptors are not used in Entity beans?

Why Interceptors are not used in Entity beans?
Interceptors can be used in MDB, Session bean but not in Entity bean....why so?
Thanks,
Rahul.

Hi,
why batch updations are not prefered in entity beansPlease refer the specification of ejb and find out what the entity bean is meant for.In short the emtity bean represents the object state which can be persisted.
Talking regarding the batch updations does not make sense , also the entity bean represents the row of the table mapped to the Object(java Object).
Regards
Vicky

Some segments are missing in the idocs for master data zdebmas

hi guru's,
can any one hlep me here we facing the probelumm
some segments are missing in the idocs for master data zdebmas
, there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
There is some segments below is missing in the IDoc:
how to chcek this probelumm...

hi
i got the function module. it is triggerig whne i do changepointer running.
what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
my req is to show all segments even if i do changes in one segmet fields dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
can u plse help me the login or any function module which will fill the alla the segmetns .

Concatenated values used in documents for master data-Urgent

Hi,
while trying to activate a master data object, it is not activating and this message appears
"Concatenated values used in documents for master data"
Please help me in this regard.

Hi,
this forum is about the SAP BusinessObjects BI Solution Architecture. I would suggest you post your questions into the SAP BW forum.
regards
Ingo Hilgefort

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

Error : Concatenated values used in documents for master data

Hi Experts,
I am trying to add one characteristics as compounding characteristics to my master data info object.
previously 'Document property' option was checked for the infoobject. so i unchecked it, as it was not allowing me to add the compounding characterisitcs.
After doing the changes, when I am trying to save, its throwing error as 'Concatenated values used in documents for master data'.
Can anyone please help me with what exactly does it mean and what would be the solution to remove this error.
Thanks,
Neelima
Edited by: Potnuru Neelima on Mar 1, 2011 8:39 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:40 AM
Edited by: Potnuru Neelima on Mar 1, 2011 8:41 AM

Hi All,
Just found the soultion...wanted to share this....
Actually one document was created on one of my opportunity values, which was not simply visible from edit menu -> documents.
Go to RSA1 -> documents -> master data -> and then give ur info object name -> will get all the documents maintained corresponding to it. Need to delete them.
Then compounding characteristic can be added to our info object.
Regards,
Neelima

Why to use chnage pointers for master data idoc why not the change idoc

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Hi,
It was a good question ... SAP seems never designed the change pointer to handle transactional data IDocs. Only for master data IDocs distribution purposes.
It may due to volume data ... the transactional data can change many times within a day compare with master data which hardly change or once a while.
Regards,
Ferry Lianto

SRM Field Control for Master Data fields e.g. hide Street prefix

Hi Experts,
we are using SRM 7 Ehp1.
For the RFx process we need to create bidders.
To simplify the creation of the bidder for the users we would like to hide
all unnecessary fields e.g. Street prefix / Street suffix.
I tried to use the customizing img "SAP Supplier Relationship Management --> SRM Server --> Cross-Application Basic Settings --> Extensions and Field Control (Personalization) --> Configure Field Control"
I've tried the function "Configure Control for Fields on Header Level".
There is a business object type BBP001 for bidders but only 4 fields are available for field control.
It seems this customizing entry is only for transaction data, e.g. SC, PO but not for master data.
Is it possible to hide fields for bidders within SRM?
Thanks in advance for your help!
Kind Regards
Stefan

I've enhanced the relevant web dynpro component view.
Created an post exit to the method WDDOMODIFYVIEW.
Regards
Stefan

Why can you not use Apple Pay for purchases in the App Store or iTunes?

To make a purchases in the App Store or iTunes, it appears you can only pay by entering Mastercard, Visa, Discover, or AmEx information. If you select none and try to make a purchase, you will again be prompted to enter this information. I would like to use my Apple Pay account to pay for Apps/tunes, but that doesn't seem possible. It seems this negates one of the primary benefits of Apple Pay, which is to make purchases without turning over your credit card information to the merchant, in this case Apple. I know you can pay with Touch ID, but that is only authoring payment from your credit card information you have on file.

Hello ToastyFlake,
It sounds like you are wanting to use ApplePay to purchase content from either the iTunes or App Stores. According to the following article, you are correct. ApplePay is for in-app (if the app supports it) or purchasing from a retail store.
Set up and use Apple Pay
Pay with Apple Pay in stores
On iPhone 6 and iPhone 6 Plus, you can use Apple Pay in stores that accept contactless payments. Look for one of these symbols at checkout:
Pay with Apple Pay in apps
On iPhone 6, iPhone 6 Plus, iPad Air 2, and iPad mini 3, you can use Apple Pay to pay within apps when you see the “Buy with Apple Pay” or “Apple Pay” button as a payment method. Look for these buttons in apps:
Thank you for using Apple Support Communities.
Cheers,
Sterling

Time series functions are not working in OBIEE for ESSBASE data source

Hi All,
I am facing a problem in OBIEE as I am getting error messages for measure columns with Time series functions(Ago,ToDate and PeriodRolling) in both RPD and Answers.
Error is "Target database does not support Ago operation".
But I am aware of OBIEE supports Time Series functions for Essbase data source.
using Hyperion 9.3.1 as data source and obiee 11.1.1.5.0 as reporting tool.
Appreciate your help.
Thanks,
Aravind

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

Pricing errors are not cleared after fixing the master data

Hi All,
Kindly go through the issue explained below.
Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.
System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine. Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
Scenario : Opportunity is saved with pricing errors.
Analysis : Price or/and Sales area are not maintained in Product that is maintained in Oppt. That is why this error occurs. So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
Actual result: When we create a new opportunity with the same product, pricing is determined. But the errors are not going away from the already created opportunity transactions.
Please let me know if this scenario is not clear to understand.
Please help with your inputs. Thank you for your time.
Regards,
Maddy

Hi Luis,
Thank you very much for your reply. Could you please help me where is the button 'Redermine Pricing' available? I have checked in Opportunity transaction but failed.
Regards,
Maddy

Authorisation control for master data creation on the basis of eq. category

Hi Experts,
In one of my business scenerio , I want to control the authorisation of a particular person on the basis of equipment category. I want to create a role for that particular ID and assign that equipment category sothat he can not create the equipments other than that category.
How can I control this authorisation on object level basis? If any other way , please let me know sothat i can try out for the same.
With Regards
VT

Hi
You can use SPRO>PM and CS>Tech objects>equipment>Defien field selection for eqmt master record. Chose 2nd activity in list and click 'influencing' and select Equipment catiegory. Through this for a equipment category, you can control fields as input, required, display, hide. Maintain the field auth group as required for a equipment category you want to control.
You can create auth group in SPRO same path as above under techincal objects, general data. Check with GRC/basis team to limit auth to Equipment category for this group. If not, you can do this through ABAP for validating the auth group for equipment category. Assign this Auth group to a role
Regards
Hemanth

BI beans does not use QUERY RERWITE for cube

Hello!
First of all I would like to say big thanks to Keith for help on dimension rollup. It works now.
I am creating a pilot environment with
Oracle 10.2.0.3
OWB 10.2.0.3
SS Add-in 10.1.2.2
and one cube ST_R and three dims
DIM_R_NOMA for products
DIM_R_CIDI for stores
DIM_R_TIME for time
Now I have deployed dimensions and cube to CWM2. Dimensions are working quite well. I would say even better than in MOLAP. About 1 second for rollup on 2000 members in level.
Now I am facing second problem. I can not force BI beans (which is used in SS Add-in and Disco and OWB browser) to use summaries prepared by DBMS_ODM package.
1/ I have prepared MV LOGS for dimension and fact tables
2/ I have prepared MV for dimensions using DBMS_ODM
3/ I've prepared materialized view for cube aggs. with
DBMS_ODM.CREATESTDFACTMV('WWHH','ST_R','ST_R.sql','C:\TEMP',true,'FULL');
CWM2_OLAP_CUBE.set_mv_summary_code('WWHH','ST_R','GROUPINGSET');
as described in OLAP REFERENCE on DBMS_ODM page.
I explained all my MVs - they seem to be OK. They support
REWRITE_GENERAL,
REWRITE_FULL_TEXT,
REWRITE_PART_TEXT
There are no support for PCT rewrite etc.
My user 'WWHH' has a privileges:
ANALYSE_ANY
QWERY_REWRITE
GLOBAL_QWERY_REWRITE
My database has setting
QUERY_REWRITE_ENABLED=true
Stale_tolerated=enforced
all MVs and tables are analyzed.
I do not use parallel settings on tables,MVs.
to do some further analisys I've enabled olapcontinuous_trace_file. It generates some useful SQL statements from BI BEANS in UDUMP. These statements DO NOT resolve in MAT VIEW in explain plan
Questions:
Are there any settings for BI BEANS to turn on/off?
Are there any other packages to create MVs?
How to explain WHY MVs are not used?
THanks everybody for cooperation.
Regards,
Kirill Boyko

Keith,
Thank you for response.
I refreshed metadata, but no result. Again, dimensions are OK, but not cube. I am attaching explanation why it did no rewrite. This explanation is coming from
dbms_mview.Explain_Rewrite
QSM-01150: query did not rewrite
QSM-01263: query rewrite not possible when query references a dictionary table or view
QSM-01284: materialized view MV1125 has an anchor table DIM_R_TIME_V not found in query
QSM-01102: materialized view, MV1125, requires join back to table, DIM_R_CIDI_V, on column, REGION_ID
QSM-01219: no suitable materialized view found to rewrite this query
QSM-01284: - is wrong. I have DIM_R_TIME_V in MView.
Here is my MVIEW script from database:
SELECT
FROM
WWHH.CAWHTB2 a,
WWHH.DIM_R_CIDI_V b,
WWHH.DIM_R_NOMA_V c,
WWHH.DIM_R_TIME_V d
WHERE
b.STORE_ID = a.CIIDCA AND
c.ARTICLE_ID = a.NMIDCA AND
d.DAY_ID = a.CLIDCA
GROUP BY GROUPING SETS ( ...)
Could you tell me where to check in metadata that MVIEW is correctly setup?

Why we are not using "Message Control" for Master data ?

Similar Messages

Maybe you are looking for