Why will a stand alone executalbe with an installer work on windows 2000 and crashes on windows xp professional?

When I run the setup.exe file on a Windows 2000 system it installs properly, but the same file run on a XP Professional system I get an error stating Fatal Error: Installation ended prematurely because of an error.
See here for more information on the specific installer I'm trying to use.
In fact I get this error for any stand alone executable I try to install on any XP machines. I am using LV 7.1. Is there a way to manually install eve
rything?
Thanks

Sure you can Install a lv application manually. just copy the exe-file,
support files in a folder. For the runtimeengine just copy the file
lvrte.dll in the folder of your application or in the windows system folder.
Hope that helps, Niko
BB Herman wrote:
> Why will a stand alone executalbe with an installer work on windows
> 2000 and crashes on windows xp professional?
>
> When I run the setup.exe file on a Windows 2000 system it installs
> properly, but the same file run on a XP Professional system I get an
> error stating Fatal Error: Installation ended prematurely because of
> an error.
>
> See
> HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
for more information on the specific installer I'm trying to
> use.
>
> In fact I get this error for any stand alone executable I try to
> install on any XP machines. I am using LV 7.1. Is there a way to
> manually install everything?
>
> Thanks

Similar Messages

Problems building a stand alone application with LV 8.6.1.

I'm having problems building a stand alone application with LV8.6.1. I'm using a USB- 6008 DAQ and USB-6501 Digital device in the application. I already have an simple executable on the machine so the Run time Engine is already installed. For the USB DAQ device, I assume I need to include the DAQmx8.8 as one of the installers. When I attempt to build the application, I'm prompted for several disk, one being a distribuition disk 1. I have the installation disk for the developer package. I did not see a distribuiton disk as one of the installation disks. When I insert disk 1 I get an error that another application is trying to run. Could someone tell me which installers I need to include and where do I find the "distributor" disk.
Thank you,

are you building installer for the first time on this PC?...It usually asks for the drivers CDs and some toolkits if required.
you just need to use drivers CDs (comes with LabVIEW) from which you installed on this PC. If you have ever upgraded drivers, then you have to use the latest CDs only.......
another issue may be ...when u insert the driver disk, it has autorun, it will launch drivers installation wizard....close that and then try to build distribution.........
Message Edited by Anil Reddy on 09-25-2009 01:22 PM
Anil Punnam
CLD
LV 2012, TestStand 4.2..........

Why will my ipad not sync with the calendars on my computer, why will my ipad not sync with the calendars on my computer

Why will my ipad not sync with calendars on my imac?

I did find the info tab while trying to sync my calendars, but my iPhone5, iPhone 4S and iPad still won't sync to my MacBook Pro.
Are you using Mac OS 10.9 Mavericks?
There is no Info tab and you need to sync contacts & calendars via iCloud.

Stand-Alone application with LabView 7.0 getting error can't find DAQmx clear task.vi

I have attempted to create a stand alone vi with the Build Application or Shared Library(dll) in LabVeiw 7.0
When I put it on another PC to test it I get the error "can't find DAQmx clear task.vi"
the other PC has Labview 7.0 and DAQmx 8.1 also.
I believe my problem is in the source tab where you are supposed to add support and dynamic vi's I have search the forums and Ni's data base and have not found a solution.
Solved!
Go to Solution.

Hi LabTech09,
When you run the executable on the other computer is when you get this error? Do you have the exact same versions of LabVIEW and DAQmx on both computers? Does the dialog allow you to navigate to the DAQmx clear task.vi? If so, you can find these VIs in C:\Program Files\National Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb. Does the executable work on the development machine (the machine it was compiled on)?
Regards,
Jim Schwartz

Why will Adobe Acrobat not load PDF from my work website, but will load on other computers?

Why will Adobe Acrobat not load PDF from my work website, but will load on other computers? I have to log in to a website to get our orders, and we thought it was the website at first, but have since realized it is just my computer with this issue. I have tried uninstalling and reinstalling the software and still it does not work.

You ask "why", but don't provide any information...
What is your operating system?
What is your web browser?
Are you asking about Adobe Reader or Acrobat?
What is your Reader / Acrobat version?
What exactly means "will not load"?

TS3989 Why will some pictures not stream from iphone4s to ipad2,pictures taken before and pictures taken after have ,but some won't

Why will some pictures not stream from iphone4s to ipad2,pictures taken before and after transferred ok but some won't.Any suggestions

    1.    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    2.    Photostream only syncs when the camera app is closed, ensure it is closed.
    3.    Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers !

Hi i need to design a notch filter for eliminating ECG hum..i am working with NI ELVIS work station...and LABVIE 8.0

hi i need to design a notch filter for eliminating ECG hum..i am working with NI ELVIS work station...and LABVIEW 8.0. Unfortunately it needs an addon software "Digital filter design toolkit", which i dont have. Its urgent..can some 1 plzz help me out.

Hi and Happy Halloween,
Depending on the license you have for LabVIEW and the toolsets you have installed, you may be able to have a "notch" filter. I would search your pallet for "Bandstop" because a notch is a type of Bandstop filter. Or, you can make a notch out of a high-pass and a low-pass or you can use the filter express VI. If these VIs are not on your pallet than you probably only have the LabVIEW Base and thus, cannot use these options.
Charlie M. CLD

How can I publish a stand-alone file with Captivate 8?

I have just downloaded the new Captivate 8, but I an not sure how to publish a stand-alone, interactive file now. In previous versions, one could publish an .exe file that didn't require a browser to work. In the new version, there appears to be two options: HTML 5/SWF or video. The video option publishes a .mp4. Is there still a way to publish a .exe?
Thank you!

Frankly I am a little tired of Adobe stonewalling on the issue of removing exe and dmg publication facility from Adobe Captivate 8. What a load of flimsy excuses from Adobe!!!! In Cap 7 I exported to exe and dog all the time and I truly miss this facility. Why does Adobe remove a perfectly good facility when upgrading?
It all makes me believe that Captivate 8 was rushed out without much thought other than to get a 'not working correctly' responsive design bit built in. Did they not think about customer research?
And so, I've just paid over £300 to upgrade to a version of Captivate (8) I won't be using much. This disgusts me and I am sure I am not alone.
And yes, why is Captivate not part of Creative Cloud? I ask this question and I have asked it before. Adobe will NEVER answer this question.
Adobe. Please try and LISTEN to what your customers are saying.
Richard Broom

Stand alone application with VISA

Hello,
I build a stand alone installer application from my VI using LV 7.1 VI which contains some VISA serial communications with a standard RS232 port. In build application wizard settings I checked the Serial Port Suport in Advanced settings in Installer .When I installed this stand-alone app on a new PC without LV installed the communication didn´t work: Error -1073807298 - Could not perform operation because of I/O error.
I don't know if I have to install something else on the target machine. I have seen some topics in discussion forum about the VISA run machine. I imagined it would be included in the installation I had created. If someone could help me I would thank.
Celia

Hi Celia,
You might check to make sure that the VISA Resource Name you are providing in your application is the same as the name the new machine is using. If you build the application and it is looking for a specific resource that does not exist on the new machine, you might see an error similar to this one.
Donovan

How to create a stand alone app with Jdeveloper?

Hi,
I have a created an application with JDeveloper using the ADF framework. It's a simple frontend to some database tables giving the user the possibility to create and update records.
Is it possible to create a stand-alone application from JDeveloper without having to install any application server? I have tried to follow the documentation but somehow I only find descriptions of web enabled applications.
That's not what I want. I want a (windows) application that can 'talk' to the database. Would be great to have just a .jar file to deploy to the users computer.
Is this possible with JDeveloper? Or am I totally wrong?
Thanks for any help!
Bruno

You don't need an OC4J.
You just need to make sure the ADF libraries you are using are on the classpath of your application. (Your default JAR won't contain them).
Have a look at the command line that JDeveloper uses to run your project (it is in the log file) - copy paste this into a command line and you should be able to run your code from outside JDeveloper.
Read more on this in the online help under the deployment to JAR file chapter and possibly the webstart part.
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtTopicFile.deploying%7Cbasic%7Cdep_pways_basicdep~html/

Why will Divx not play video with sound on Firefox but will play with sound on Chrome?

Divx will play web based movies with both sound and audio on Chrome.
Divx will only play video on Firefox.
I have removed and reinstalled Divx on my computer.
I have a desktop computer running Vista.
I just became aware of this problem yesterday. In the past I have had no problem running these videos on Firefox with both sound and video.

I was having this problem with videos at home yesterday as well.
I also saw this conversation [http://veehd.com/forum/viewtopic?f=523714] and it may be a codec issue? No one confirmed this yet.
*But to make sure it is not Firefox, temporarily disable it and try another player. [[Fix common audio and video issues]]
*[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
Please post back with your results, it could help other users!

Cannot make Canon PIXMA MX922 fax to work with "Windows Fax And Scan" on Windows 7, 8.1

I have Canon PIXMA MX922 multifunction printer installed wireless on iMac OS X Mavericks. It works great but there is no fax drivers for Mac. I have Windows 7 and Windows 8.1 installed on Parallel Desktop. I am able to print and scan on these machines. I can scan using "Windows Fax and Scan" and other programs including My Image Gardens but no luck with faxing. I can send faxes using print function and chosing a Cannon MX920 series fax driver. The problem is to recieve faxes. I've connected MX922 wireless and wired with no help.
Does anyone have the same problem? Any ideas?

Hi Anton,
thank you for your advice.
In case this is going to fix itself in 25 hours I will check for the issue then. I'm gonna let you know whether the issues has disappeared.
But it sounds to me a little bit, like you have been expecting that behaviour? Have you? Especially within a Lab it is very confusing to have test clients which appear fully functional 25 hours after the setup has been succeeded.
I've followed your annotation and posted the log files on the Connect portal.
Thx
Peter

Why have all 3 airport express base stations stopped working, BT have checked and improved line still not working?

Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?

You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
Plugged in by ethernet does it work??
Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
Later version bought it to the surface.
About Wireless Diagnostics
If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
How to load 5.6 into later Lion & ML
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

Communication Failing with Corrupted Chars . Sql Server 2000 and AS400

Hi Experts,
I am facing this below error after 9 yrs. sql server 2000 and As400 on prod server. while on dev and stage it's running properly. Here username is ABCD, while it's showing BCD
The OLE DB provider "MSDASQL" for linked server "" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "xxxxx".
[SQLSTATE 42000] (Error 7303) OLE DB provider "MSDASQL" for linked server "" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
[SQLSTATE 01000] (Error 7412) OLE DB provider "MSDASQL" for linked server returned message "[IBM][iSeries Access ODBC Driver]Communication link failure. comm rc=8001 - CWBSY0001 -
User BCD on server does not exist, Password length = 8, Prompt Mode = Never, System IP Address = "xxxxx". [SQLSTATE 01000] (Error 7412). The step failed.
Here ABCD user is also disabling/locking the profile on AS400 server.
When we tried on Dev server, linked server through DSN working properly. Last time when it appeared 2 yrs ago, it resolved automatically. but now more than 10 days passed and still Failing.
Please Guide Me.
Regards,
Manish

So this setup has worked for nine years, and all of a sudden stopped working with this error message? Does not look trivial...
What does Here ABCD user is also disabling/locking the profile on AS400 server mean? Is ABCD able to log in directly on the AS400 box?
One possibility is that the user ABCD has been dropped or disabled, and then there is a bug in the ODBC driver where the first character of the username is distorted in the error message. I note that there are two spaces between "User" and "BCD".
The other possibility is that the AS400 is receiving a login attempt from BCD (or something that ends in BCD with an invisible leading character). This sounds very difficult to troubleshoot...
Erland Sommarskog, SQL Server MVP, [email protected]

Why will a stand alone executalbe with an installer work on windows 2000 and crashes on windows xp professional?

Similar Messages

Maybe you are looking for