Why won't my atv2 connect with a static address

Hello,
Suddenly, my ATV2 will not connect to the net with a static address.  I even did a restore hoping it would help.  When I log into the router,  i cannot see the atv2 unless I allow a dhcp address.  We're not talking rocket science:
I have an airport extreme with the mac address entered on the allow list (which isnt relavent if the router can only see it through dhcp)
192.169.0.25  preferred static address
255.255.255.0 subnet
192.168.0.1 dns
192.168.0.1 router address
i get the same results wired or wifi.
Nothing has changed in my configurations but alas I turned on my ATV2 to discover it was not connecting to my network as before.
Thanks for taking the time to read my post.

192.169.0.25  preferred static address
255.255.255.0 subnet
192.168.0.1 dns
192.168.0.1 router address
i get the same results wired or wifi.
Did you mean to write 192.169.0.25??
The router is on 192.168.0.1, that would mean your ATV is on a different subnet to your router.
ATV's IP address should be 192.168.0.25 instead, so they are on the same subnet.

Similar Messages

  • HT204380 Why won't my FaceTime connect with others?

    Why won't my FaceTime connect with others?

    Ok, so sometimes apple's servers may crash, temporarily. Just check the following site: http://www.apple.com/uk/support/systemstatus/
    and it will notify you of any crashes. The link above is for the UK. Change to adapt to your country if you are outside of the UK. If your problem isn't listed I am sure it will be resolved within 24 hours. If this problem persists best thing is to contact apple.
    Hope this helped :)

  • Why won't Apple TV connect with the servers?

    Ever since the introduction of IOS 7.03 and the new iPad I have had problems with my Apple TV. After selecting a movie or a TV show and selecting play, there is a long wait and then a message appears, "Apple TV is unable to connect with the servers."  What is going on?

    >After selecting a movie or a TV show and selecting play, there is a long wait and then a message appears, "Apple TV is unable to connect with the servers."  What is going on?
    There is a network problem.  Are you using WiFi?  Have you checked the network connection status in Settings?  Have you run the network test in Settings?

  • Why won't my iMac connect with new trackpad?

    I have an iMac with a wireless keyboard and mouse connected via Bluetooth.  When I try to connect a trackpad the mac does not detect the trackpad sitting on the desk.  Is there another setting that needs to be changed to authorize the trackpad?

    I would think.. that you have to put your track pad into a discoverable mode until your imac can pair up with it.  Check out the directions for the trackpad to activate the discoverable mode and then launch your bluetooth assistant, and go from there.
    Hope that helps
    Terrence.

  • Why won't my iPad connect with iTunes, Why won't my iPad connect with iTunes

    I have iTunes on my system version 10.6.0 and when I connect my iPad it charges and immediately tells me not charging,when I open I tunes it will tell me to download version 10.6.3 ... But the computer recognizes the iPad without iTunes but I can't copy or paste anything on it...please help..... Owe and where can I at least get 1song free on my iPad itunes

    iPads don't work like that.
    http://support.apple.com/manuals/#ipad

  • TS1567 Why won't my iTunes connect with my iPhone?

    I have tried connecting iTunes to my iPhone using my USB and others USB and computer? Everything is updated to date, a friend also has this problem... What can I do?

    Hello b_sturgess,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Have a nice day,
    Mario

  • Why won't my itunes connect with my music even though its authorized?

    I tried to unsync my Ipod but when I did it it said that I have a total of 39 errors because My computer wasn't Authorized. But I went to go authorize my computer and it said ok now your computer is authorized out of 5, but what came up before still came up again. How do I solve this problem??? Please get back to me on this. Thanks!

    Maybe:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

  • Why won't my iPhone connect to the Internet? It will goes days with no connection, then suddenly have a connection for a while. I am on the Sprint network.

    Why won't my iPhone connect to the Internet? It will goes days with no connection, then suddenly have a connection for a while. I am on the Sprint network.

    Have you contacted Sprint?  See if they can resolve your issue, if you can't get 3G.

  • Why won't my printer print with Windows 8?

    Why won’t my printer print with Windows 8?
    Have you just upgraded, or purchased a new computer with Windows 8, and now you can’t get your printer to work?  If so, this may help you.  A lot of people have questions about installing their printer on a new OS.  This will help you answer those questions and make sure that you get everything installed. 
    Before You Start
    Before you try to install the printer on a Windows 8 computer, you should check to make sure the printer is compatible with the new OS.  The link below will give you a list of the printers that will work in Windows 8.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&lc=en&cc=us&destPage=document&dlc=en
    If you have upgraded your computer to Windows 8 form another version of Windows, make sure to completely uninstall all of the software for your printer.  It should still print, but to use all the functions you will need to reinstall the software, if it’s available.
    Another thing to consider is how you want to connect the printer to the computer. 
    USB.  You should make sure that you have a USB cable that is no longer than 6 ft. (roughly 2m).  Make sure to connect the printer directly to the computer.  Do not use a USB hub. 
    Ethernet cable.  Make sure you have the network setup, that you have a free cable port on the router, and that you have an Ethernet cable available.
    Wireless.  You should make sure that you have the wireless network setup, and that you have the password for the wireless network. 
     1.     Installing Via USB
    Installing via USB in Windows 8 has become much simpler for HP printer users.  In other versions of the Windows OS you had to start the installation and wait for it to ask you for the USB connection.  If you didn’t, you would have to uninstall the printer from the Printers/Devices folder, and then start the install.  In Windows 8, that will not be a problem.  If you plug the printer’s USB cable in and then install the printer’s software, it will still work.  Now for in depth instructions on installing the printer via USB click the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460670&tmp_task=solveCategory&cc=us&dlc=en&la...
    2.     Installing Via an Ethernet Network Connection
    For an Ethernet network connected printer the install is amazingly simple.  All you have to do is connect the printer to the network.  Once you have that done, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if it’s available.  It’s really that easy.
    http://www8.hp.com/us/en/support-drivers.html
    3.     Installing Via a Wireless Network Connection.
    For a wireless network connected printer the install is amazingly simple as well.  All you have to do is connect the printer to the network.  Once you have that done, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if it’s available.  It’s pretty much the same as an Ethernet install, just wireless.
    http://www8.hp.com/us/en/support-drivers.html
    Alternate Install Methods
    With Windows 8, many printers’ drivers are installed with the OS.  These are known as InOS drivers, since they come built into the operating system.  If you have one of those printers, all you should have to do is connect it to the computer via USB, or connect it to the network via Ethernet or wireless.  Once you have that done Windows will handle the rest.  There are alternate methods of installing your printer if the normal methods are not working for some reason.  You can install the printer either using the Printer Install Wizard, or through Windows Updates. 
    Printer Install Wizard:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02681060&tmp_task=solveCategory&cc=us&dlc=en&la...
    Windows Update:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&tmp_task=solveCategory&cc=us&dlc=en&la...
    Note: The Laserjet drivers for the Asia-Pacific and Japan won’t be released until a later date.  Check the support site linked below for driver availability.  I will update this post once they become available.
    http://www8.hp.com/us/en/support-drivers.html
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    This question was solved.
    View Solution.

    Hope this answers some questions.  
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Hello Jesslb23,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    To resolve issues with sending and receiving iMessages, follow these steps first
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
    Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
    iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you are still unable to send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Verify that the contact you are attempting to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    Best of luck,
    Mario

  • HT201177 Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

    Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Why won't Lion file share with windows 7?

    Why won't Lion file share with windows 7? Is there going to be a fix?

    Verysafety shareing file...

  • HT3702 Yes you placed a hold but then when I went to complete an in app purchase it says I can't. I have no restrictions on this **** thing and never had this problem.. Why won't your iTunes communicate with my games so I can purchase stuff.

    Yes you placed a hold but then when I went to complete an in app purchase it says I can't. I have no restrictions on this **** thing and never had this problem.. Why won't your iTunes communicate with my games so I can purchase stuff. I have an iPad mini just trying to play a **** game.

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    If you are getting an error message then what is the full text of it ?
    The temporary store holding charge is standard, it should disappear within a few days or so.

  • Why won't my ipad3 bluetooth with my iphone3. it used to about 12 months ago?

    Why won't my ipad3 bluetooth with my iphone 3? It used to about 12 monthes ago?

    Try Settings > General > Reset > Reset Network Settings on both devices and set them up again.

  • Why won't firefox 9 work with Zonealarm?

    Why won't firefox 9 work with Zonealarm?

    You got a reply in your earlier thread here: https://support.mozilla.org/en-US/questions/910967

Maybe you are looking for