Why won't my mac pro let me reset my security questions?

why won't my mac pro let me reset my security questions?

Solution may be found if you search in the "More Like This" section over in the right column. 

Similar Messages

  • Why won't my Mac Pro load things without locking up ?

    Why won't my Mac Pro load things or let me do a "save as" without locking up ? I have tried to run the Apple Hardware Test and it locks up as well.

    you have anitebook in forum for 65lbs towers
    youneed to repair your disk directory or erase and restore
    and use Recovery Mode in 10.7 and later
    AHT does not lick up, not unless your laptop RAM or mobo has failed totally and died, more common for laptops that overheat, sufferwater damage, but still...
    depends on how new what to do, might try macbookmpro forum.

  • Why won't my Mac Pro go to sleep?

    Why won't my Mac Pro go to sleep?

    Hi X,
    I've been having the same problem of mac pro not going to sleep. I think its to do with some universal audio drivers installed with a recent hardware interface I've added.
    the terminal app in response to above line reads;
    com.uaudio.driver.UAD2System(6.3.1)
    com.uaudio.driver.UAFWAudio(4.0.0
    com.digidesign.iokit.DigiDal(9.0.6f4)
    com.paceap.kext.pacesupport.snowleopard(5.8)
    launch agents (in user)
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    com.apple.FolderActions.enabled.plist
    com.apple.FolderActions.folders.plist
    com.google.keystone.agent.plist
    launch agents and daemons - too many to list
    any idea from this or would you need to see all the files you listed in Mona Gorillas query?
    appreciate your input

  • Why won't my Mac Pro sleep after Lion is installed?

    Why won't my Mac Pro sleep after Lion is installed?

    Tell us, what hardware add ons?
    old software? that required PowerPC/Rosetta maybe.
    Look for any apps, process that used powerpc and look for updates, check out RoaringApps for a table of Lion compatible programs
    does it happen iwth a clean install?
    how about if you do a Safe Boot?

  • Why can't I send a code to reset my security questions but I have a rescue email address?

    Why can't I send a code to reset my security questions but I have a rescue email address?

    If you have a rescue email address on your account then you will see a reset link on your account : http://support.apple.com/kb/HT6170
    If you only have alternate/secondary email addresses on your account then you won't get the reset link, an you won't be able to add a rescue email address until you can answer your questions - you will have to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
    When they've been reset you can then add one for potential future use : http://support.apple.com/kb/HT5620

  • HT5312 Can you please let me reset my security questions!!????? Please

    Can you please let me reset my security questions!!!????? Please!!

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
    The page that you posted from tells you how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • I can't find an option to add a recovery email for the purpose of resetting my security questions. There is also no option when I am in the "manage my account" area that lets me reset my security questions. How can I reset them?

    I can't find an option to add a recovery email for the purpose of resetting my security questions. There is also no option when I am in the "manage my account" area that lets me reset my security questions. How can I reset them?

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions
    5. For online assistance use Apple - Support - Express Lane

  • HT5312 Why haven't I received an email to reset my security questions

    Why havent i received an email to reset my security questions?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (98034)

  • It's not letting me reset my security questions

    I Am trying to buy a album but I can't because I dont member my security questiona and it doesn't let me reset them

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (124234)

  • Why am I not receiving an email to reset my security questions?

    I need to recover my security questions because I forgot them and I want to make store purchases, but they require me to answer my security questions. I've tried sending myself multiple resets for my security questions, but apple won't send me a single email. Alot of other people has had this problem too. What do I do?

    Either they got caught in a spam filter, or they're being sent to an address other than the one you're checking, or there's a problem on Apple's servers. If you can't find them, you need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (101253)

  • Why won't my Mac Pro read a burnt copy of Photoshop CS5?

    I just got myself a Mac Pro. From upgrading my old G4. My Mac Pro is a 2 Dual-Core Intel Xeon 2.66 ghz Version 10.6.8. With a SONY DVD RW DW-D150A Drive and a NVIDIA GeForce 7300 GT graphics/display. So I have plenty of requirements to run CS5..I think. So anyways my friend let me barrow her copy of Photoshop which workered fine on her Macbook. When I tried it on my Mac the disk was read as a blank DVD?? As if nothing was written on the disk? I checked it and yes it is a written disk, so why won't it work? Any suggestions would help.
    Thanks.

    Your friend is not allowed to share her copy of photoshop like that, but that's not related to your problem. You've burned the DVD wrong or your hardware is broken.

  • Why won't my Mac Pro 5,1 boot Snow Leopard?

    My old Mac Pro 1,1 died.    I replaced it with a new Mac Pro 5,1.  (dual Westmere quad core)  Apple told me it would run Snow Leopard.  The new machine recognizes my old Snow Leopard hard drives as start-up disks but does not boot past the gray screen apple logo.   I was very good about keeping the operating systems up to date.   I am pretty sure that I have OS 10.6.8 installed...   I have two Snow Leopard disks that won't boot and a Leopard disk that also shows up as a start-up disk that does not boot either.  All stall at the gray screen Apple logo. 
    What gives????
    I am pretty disappointed.   I need Rosetta back!
    Mike

    Mac Pro
    Date introduced
    Original Mac OS X included
    (see Tips 1 and 3)
    Later Mac OS X included
    (see Tip 1)
    Mac OS X Build(s)
    (see Tip 2)
    Mac Pro (Late 2013)
    Dec 2013
    10.9
    13A4023
    Mac Pro (Mid 2012)
    Jun 2012
    10.7.3
    10.8, 10.8.3
    11D2001, 12A269, 12D78
    Mac Pro (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3
    10F2521, 10F2554, 11A511a, 11C74, 11D2001
    Mac Pro with Mac OS X Server (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3 (Server)
    10F2522, 11A511a, 11C74, 11D2001 (Server)
    Mac Pro (Early 2009)
    Mar 2009
    10.5.6
    10.6
    9G3553, 10A432
    Mac Pro (Early 2008)
    Jan 2008
    10.5.1
    10.5.2, 10.5.4
    9B2117, 9C2031, 9E25
    Mac Pro
    Aug 2006
    10.4.7
    10.4.8, 10.4.9, 10.4.10, 10.5
    8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129
    from:
    MacOSX: versions (builds) for computers
    What this shows is that if you can build a verion of 10.6.8 using another Mac, starting from a "Full Retail" DVD (so that "drivers for every appropriate Mac" are included) it will boot the Mac Pro 5,1 from 2010. Users here have determined that, since the 2012 model uses the same firmware with no significant new hardware changes, it will actually boot that one as well.
    Starting with a DVD that "shipped in  the box" with a different model Mac will not include the right drivers, even after update.

  • Why won't my Mac Pro go to sleep any more?

    I upgraded to yosemite I a few days later I noticed that my mac pro (3.1 early 2008 dual 2.8 xeon processors, two sad's one hdd, 14GB memory) doesn't go to sleep any more.  When I choose sleep from the Apple menu the displays go dark and it looks like it's sleeping, but the system is still humming along, as if a fan or an HDD is still spinning.  I can shut it down just fine, but would really like just to have it go to sleep like it used to.
    I also recently added a PCIe USB 3.0/eSATA card for external connections (From OWC, compatible with my system).
    Any known issues that would cause this?

    Hi ..
    Open System Preferences > Energy Saver then click:  Restore Defaults
    Then select Sleep from the Apple  menu.
    See if that makes a difference.
    If not, reset the PRAM > OS X Yosemite: Reset your computer’s PRAM
    BTW, if connected, external drives can prevent the Mac from going in to sleep mode.

  • Why won't my Mac Pro wake up?

    If I put my Mac Pro to sleep, it will not wake up normally. That is, tapping on the space bar, or moving the mouse, do not wake up the computer. I have to press on the power button for a few seconds, listen for the click. (so, manual shut down)  Then I press the power button again, and the computer starts up.
    Also, shut down though computer prompts is not sufficient. I ALWAYS have to use manual shut down to be effective.
    I've talked to apple support a lot, no solution. I brought my Mac Pro to the apple store today, they thought they'd identified the culprit: My wacom tablet.
    At the store, with no Wacom tablet, the computer did wake up from sleep-- I think. It definitely started up normally after a computer prompted shut down. (I mean a shut down achieved with the command under the apple logo on the computer...
    But when I brought the computer back home I had the same problem, even when it wasn't connected to my Wacom tablet.
    Other thing:  If the computer is asleep and I un plug it, then plug it in again to power strip, it will wake up! So is it possible that I'm not getting enough juice coming into my computer?
    Thanks, if anyone has any ideas I would be glad to hear them.

    You need to plug the keyboard into a USB port on the chassis to have the Startup "snag keys" be recognized as well.
    The USB ports on the keyboard only has enough power for ONE low power mouse. Do not plug anything else into those ports, not even a Flash Drive.
    The mouse down/up scrolling default is the iPhone direction. You can change it with a checkbox in System Preferences > Mouse

  • Why won't it let me reset me security questions?

    I set my security questions quite some time ago. I have forgotten my answers for them now and want to reset them because
    Randomly when I try to download an app from the apple store it prompts me to answer them, resulting in me trying to figure out how
    And it won't let me have the option. I have tried the original way, most threads give the same answer. I'm unsure if it's because I'm
    Not on an actual computer and I'm on a mobile device, but when it leads to me to hit the button to reset them the link is not there.
    I do not have a computer so if there is a way to reset this from my Iphone that would be great to know about!
    Thank you!

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you don't have one (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 .

Maybe you are looking for

  • EJB 3.0 vs old version EJB

    Hi all, EJB 3.0 is getting popular because of the Dependency Injection which greatly reduce the usage of XML. Therefore, I have a question here. In Ejb 3.0, how many XML will we apply? 1. Session Bean - ? 2. Entity Bean - ? 3. Message Driven Bean - ?

  • Possible to control space after periods and commas?

    There's a font i'd like to use as a body text font, but sometimes the spaces after periods and commas are inadequate. Is there a way to control this in InDesign? or must this be resolved by manipulating the font in a font editor? thanks Kurt Hoffman

  • How to build and deploy ejb in j2ee!!

    HI there!! Newbie Question. I know this is very rude to ask a question "How to build and deploy ejb in j2ee server??", but please help me. I just learned some servlets worked with tomcat. Now I want to learn more about ejb, could anyone suggest me an

  • Seemingly simple question regarding safe areas

    I can't seem to find a simple fix to this anywhere, though it seems to me like there should be one. When I shoot, I compose my shots in camera so that they look the same when played on a TV. Because of the nature of television, some portion is always

  • Help needed with java

    Hello everyone I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out. here is my code so far: A