Why won't my songs stay with their albums?
When I sync my personal CDs through the iphone store, to my nano 5th they don't stay in their albums. Each album has only one of the songs. The rest sort to the end of my albums in a category called unknown artists. Does anyone know how to fix this, or what I've done wrong. TIA
This has been well discussed on another thread here: https://discussions.apple.com/thread/3191630?start=2055&tstart=0
(There appear to be no moderators on these forums to make sure that new threads with the same topic don't get linked to a parent !?)
Anyway... The issues appear for many to be related to a specific Airport card type & firmware version.
I've had constant disconnect problems with my Mini since upgrading to Lion.
My Airport card specs are:
Card Type: AirPort Extreme (0x168C, 0x86)
Firmware Version: Atheros 5424: 2.1.14.9
Connecting to my Time Capsule distributing on:
PHY Mode: 802.11a
The Atheros firmware version appears to be the issue depending on certain wifi network conditions.
After some playing about today I think I've managed to force my Mini to connect on a better frequency, without having to roll back the firmware to the Snow Leopard version or mess with the Mini Airport card settings (via Terminal) by changing some settings in my router (Time Capsule).
These are the changes I made:
Airport Utility > Wireless > Wireless Options
Set Radio Mode to 802.11 a/n - b/g instead of 802.11 a/n - b/g/n (Automatic)
Set 2.4 GHz Channel to 13 instead of Automatic
Set 5GHz Channel to 48 instead of Automatic
My Mini now connects on:
PHY Mode: 802.11g
Signal / Noise: -64 dBm / -96 dBm
Transmit Rate: 54
instead of previously
PHY Mode: 802.11a
Signal / Noise: -73 dBm / -96 dBm
Transmit Rate: 36
This appears now to be stable (no drops in the last 4 hours). It's a low transmit rate still, but better than before.
The iMac is still connecting on
PHY Mode: 802.11n
Signal / Noise: -69 dBm / -88 dBm
Transmit Rate: 216
and all is right with the world (hopefully for the long term)
Similar Messages
-
Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network
Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario -
Why won't my wifi stay connected with lion
I recently installed lion on my imac. Why won't my wifi stay connected after I shut it down
This has been well discussed on another thread here: https://discussions.apple.com/thread/3191630?start=2055&tstart=0
(There appear to be no moderators on these forums to make sure that new threads with the same topic don't get linked to a parent !?)
Anyway... The issues appear for many to be related to a specific Airport card type & firmware version.
I've had constant disconnect problems with my Mini since upgrading to Lion.
My Airport card specs are:
Card Type: AirPort Extreme (0x168C, 0x86)
Firmware Version: Atheros 5424: 2.1.14.9
Connecting to my Time Capsule distributing on:
PHY Mode: 802.11a
The Atheros firmware version appears to be the issue depending on certain wifi network conditions.
After some playing about today I think I've managed to force my Mini to connect on a better frequency, without having to roll back the firmware to the Snow Leopard version or mess with the Mini Airport card settings (via Terminal) by changing some settings in my router (Time Capsule).
These are the changes I made:
Airport Utility > Wireless > Wireless Options
Set Radio Mode to 802.11 a/n - b/g instead of 802.11 a/n - b/g/n (Automatic)
Set 2.4 GHz Channel to 13 instead of Automatic
Set 5GHz Channel to 48 instead of Automatic
My Mini now connects on:
PHY Mode: 802.11g
Signal / Noise: -64 dBm / -96 dBm
Transmit Rate: 54
instead of previously
PHY Mode: 802.11a
Signal / Noise: -73 dBm / -96 dBm
Transmit Rate: 36
This appears now to be stable (no drops in the last 4 hours). It's a low transmit rate still, but better than before.
The iMac is still connecting on
PHY Mode: 802.11n
Signal / Noise: -69 dBm / -88 dBm
Transmit Rate: 216
and all is right with the world (hopefully for the long term) -
Why won't the song titles transfer with the music whaen I burn to disc and play or copy to another program?
Thank you, reducing the image size worked! I had used a low res file before, and with success decided to increase the resolution/size, and then it didn't work. the image did appear in small preview in the export panel, but wouldn't burn when all was said and done. the dimensions you gave worked fine. unfortunately, it makes the image a little bit fuzzy, but i dont think i can do anything about this. at least it burned it in there. thanks!
-
Why won't my printer print with Windows 8?
Why won’t my printer print with Windows 8?
Have you just upgraded, or purchased a new computer with Windows 8, and now you can’t get your printer to work? If so, this may help you. A lot of people have questions about installing their printer on a new OS. This will help you answer those questions and make sure that you get everything installed.
Before You Start
Before you try to install the printer on a Windows 8 computer, you should check to make sure the printer is compatible with the new OS. The link below will give you a list of the printers that will work in Windows 8.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&lc=en&cc=us&destPage=document&dlc=en
If you have upgraded your computer to Windows 8 form another version of Windows, make sure to completely uninstall all of the software for your printer. It should still print, but to use all the functions you will need to reinstall the software, if it’s available.
Another thing to consider is how you want to connect the printer to the computer.
USB. You should make sure that you have a USB cable that is no longer than 6 ft. (roughly 2m). Make sure to connect the printer directly to the computer. Do not use a USB hub.
Ethernet cable. Make sure you have the network setup, that you have a free cable port on the router, and that you have an Ethernet cable available.
Wireless. You should make sure that you have the wireless network setup, and that you have the password for the wireless network.
1. Installing Via USB
Installing via USB in Windows 8 has become much simpler for HP printer users. In other versions of the Windows OS you had to start the installation and wait for it to ask you for the USB connection. If you didn’t, you would have to uninstall the printer from the Printers/Devices folder, and then start the install. In Windows 8, that will not be a problem. If you plug the printer’s USB cable in and then install the printer’s software, it will still work. Now for in depth instructions on installing the printer via USB click the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460670&tmp_task=solveCategory&cc=us&dlc=en&la...
2. Installing Via an Ethernet Network Connection
For an Ethernet network connected printer the install is amazingly simple. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s really that easy.
http://www8.hp.com/us/en/support-drivers.html
3. Installing Via a Wireless Network Connection.
For a wireless network connected printer the install is amazingly simple as well. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s pretty much the same as an Ethernet install, just wireless.
http://www8.hp.com/us/en/support-drivers.html
Alternate Install Methods
With Windows 8, many printers’ drivers are installed with the OS. These are known as InOS drivers, since they come built into the operating system. If you have one of those printers, all you should have to do is connect it to the computer via USB, or connect it to the network via Ethernet or wireless. Once you have that done Windows will handle the rest. There are alternate methods of installing your printer if the normal methods are not working for some reason. You can install the printer either using the Printer Install Wizard, or through Windows Updates.
Printer Install Wizard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02681060&tmp_task=solveCategory&cc=us&dlc=en&la...
Windows Update:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&tmp_task=solveCategory&cc=us&dlc=en&la...
Note: The Laserjet drivers for the Asia-Pacific and Japan won’t be released until a later date. Check the support site linked below for driver availability. I will update this post once they become available.
http://www8.hp.com/us/en/support-drivers.html
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.Hope this answers some questions.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Why won't Lion file share with windows 7?
Why won't Lion file share with windows 7? Is there going to be a fix?
Verysafety shareing file...
-
HT204380 Why won't my FaceTime connect with others?
Why won't my FaceTime connect with others?
Ok, so sometimes apple's servers may crash, temporarily. Just check the following site: http://www.apple.com/uk/support/systemstatus/
and it will notify you of any crashes. The link above is for the UK. Change to adapt to your country if you are outside of the UK. If your problem isn't listed I am sure it will be resolved within 24 hours. If this problem persists best thing is to contact apple.
Hope this helped :) -
Yes you placed a hold but then when I went to complete an in app purchase it says I can't. I have no restrictions on this **** thing and never had this problem.. Why won't your iTunes communicate with my games so I can purchase stuff. I have an iPad mini just trying to play a **** game.
We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
If you are getting an error message then what is the full text of it ?
The temporary store holding charge is standard, it should disappear within a few days or so. -
Why won't my ipad3 bluetooth with my iphone3. it used to about 12 months ago?
Why won't my ipad3 bluetooth with my iphone 3? It used to about 12 monthes ago?
Try Settings > General > Reset > Reset Network Settings on both devices and set them up again.
-
how to transfer my computer itune's music to my new iphone 6 plus,
Why won't my songs transfer from itunes to my iphone 6 plus?
Message was edited by: qunniuWhat are you doing to try to transfer them and what error are you getting? There are probably a dozen possible reasons, so narrowing it down would be very helpful.
-
Why won't the songs I have downloaded recently from Itunes store, load to my Ipod. Since I switched to Windows 8 I am having trouble. HELP!
What exactly happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Are any fo the unsyning songs DRM protected?
What is the detail format of the non-syncing songs?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod -
Why won't firefox 9 work with Zonealarm?
Why won't firefox 9 work with Zonealarm?
You got a reply in your earlier thread here: https://support.mozilla.org/en-US/questions/910967
-
Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?
Use the Apple ID support -> http://www.apple.com/support/appleid/ - click through the contact information and select the iTunes, etc., hot button. You can have Apple call you or email them.
Clinton -
Why won't my ipod sync with my new laptop?
Why won't my ipod sync with my new laptop?
Hi, Ms Rudy77.
Thank you for the question. You may find these articles helpful in syncing your iPod with your new computer.
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Regards,
Jason H. -
HT203173 Why won't my songs burn to disk?
My itunes recently update to the 12.1.1.4 version (I am on windows 8 by the way).
After this download all 1200 of my songs were missing. I followed an online guide to get them back and I also plugged in my ipod and transferred everything back onto itunes.
I have created a couple of playlists and they are just not burning to disks. It has nothing to do with purchased songs as believe it or not, they are all cd imports.
Itunes follows the notion of burning the disk and all seems well. I eject the disk when its complete and put it into the cd player in the car but doesn't work. So I put the cd back into my laptop and it says it is a blank disk.
So, what's happening? Why won't songs burn to a disk since this upgrade (and no it is not a faulty disk as I have tried 5 different ones)This link provides the location where your iTunes media folder is located.
Deleting the iTunes app does not touch your iTunes media folder.
Once found, you need to select the location at iTunes > Preferences under the Advanced tab.
Maybe you are looking for
-
Can anyone help me fix this problem?
-
How can I identify and block unwanted tethering apps?
AT&T has notified us that my wife has been tethering using her 5s...only she hasn't. Not intentionally, anyway. A call to AT&T revealed that there are thousands of third party apps that apparently circumvent AT&T's requirement that the user activate
-
MacBook's Audio outputs for deejaying problem.
OK. Here's the scenario. As you all know, the MacBook has one audio output that also serves as a digital output, so it's one or the other. I have that output connected to an amplifier via the digital option. Since I'm going to use the laptop for deej
-
Satellite C660-171 - Bluescreen and can't start Windows
Hello So I start my laptop up put password in then get a blue screen DRIVER_IRQL_NOT_LESS_OR_EQUAL then it boots to the start in screen so I go in safe mode then I get blue screen again which says problem been detected Windows shut down! So how do I
-
How to create a recurring event that ends on a certain date
How do you create a recurring event in Ical that ends on a certain date?? I have an event on my calender that happens every week same date and time but will end in a couple of months.