Wi-fi connection does not auto connect on 21.5-inch mid 2010 imac help?
Wi-fi connection does not auto connect on 21.5-inch mid 2010 imac running OS X 10.8.3 (12D78) help? My wife's imac with OS X 10.6.8 has no problem getting on wi-fi automatically as well as my Ipad 2 running iOS 6.1.2
If you get a green light then you did not do a factory reset - you must disconnect all wires and follow the instructions above - you will end up with the Extreme blinking yellow - then use the Airport utility to set up the Extreme - you can put in your own names for the network, device etc. - when it comes to the passwords you can use ones of your own choice - it is not asking for the old one - if it is then it was not reset completely - try to reset again if necessary - it may take more than one try - if it still asks for a password then use "public" - it is the default - once you have set it up with your new information, and you have a green light, test the connection with your computer - if you can access the internet then you are all set - then try to a use the Apple TV with the new password - if the computer still asks for a password, then it is asking for the computer password and not the extreme or network password - I can't help you with that - you would have to ask that question on the iMac discussion group.
Similar Messages
-
I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report: 2
Anonymous UUID: 2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController 320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch 3908
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/ -
AirPort does not auto-connect to existing network after waking from sleep
...but I can easily connect it manually. I read the FAQ on this subject and followed the resetting steps in system preferences/network (the procedure was specific for Intel iMacs-but I did it anyway)
It did not help. The flaw just occurred a couple of days ago, after a year of flawless operation Please help.Solved! I trashed the internet connect preference in the library, and it worked!
-
Iphone Wi-fi not auto connecting (this time)
Usually it does every day I come home from work, it will auto connect to my wireless network without me having to do anything.
Today I was down the block and out of range of my wifi network, it tried to connect to another wifi network in which i denied access to it. Then it switched to "E" edge.
When I got home, right next to the wifi router, it was still showing an "E", so I was wondering why it didnt auto connect to the router. - So i went into general settings, and it searched and found my network, and I tapped the SSID Name of my network and joined with no problem.
My wifi is encrypted and you need a password to access it, everything is stored in my iphone, and it connected.
Was wondering why it didnt auto-connect, especialy if my setting in the iphone is set to auto connect to my trusted network..
weird.. Im thinking, because I hit deny to not connect to that network down the block, that it was also denying my Trusted network when I got home.
Possible bug?Try shutting down the iphone by holding the sleep/wake button at the top until you see slide to power off. then hold to turn the iphone back on.
If the iphone does not auto-connect.
You might want to try the following.
go into settings > wifi
choose your network and tap on forget network.
turn the iphone off and back on again.
then set up your network connecting again.
Hope this helps -
Wifi is not auto connect after resume from sleep
I keep my Mac Book Pro up-to-date with software updates.
I recently update to OS X 10.8.3 (12D78).
Since then when I open my laptop after closing it and put it to sleep the wifi connection does not re-connect automatically.
I have to click on the wifi sign near the clock and select the network to connect to.
How can I make it connect automatically like it used to?Wifi problems seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
However, sometimes any one of the following can help although, unfortunately, not always - in no particular order:
Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
Change the wifi channel on the router
Create a new Network Location: http://support.apple.com/kb/HT5289
Reboot the router
Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
...and this link:
http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/ -
Wifi does not automatically connect on iMac
When turning on my imac intermittantly the wifi internet connection does not automatically connect and when this happens i have trouble manually connecting it, resulting in me turning airport wifi on and off upto 5 times.
I am running OSX Lion V 10.7.4.
Any sugestions?Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use. -
Hi Guys,
We are trying to extract data from AS/400 TO ORACLE through ODI Interfaces,most of the time they wilkl work well.
Sometimes suddenly in the middle of the load it will fails with an error message 'The connection does not exist'
The following is the full error message any help here guys?It will work perfectly when we run it again:-
-99999 : 08003 : java.sql.SQLException: The connection does not exist.
java.sql.SQLException: The connection does not exist.
at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
at com.ibm.as400.access.AS400JDBCConnection.checkOpen(AS400JDBCConnection.java:418)
at com.ibm.as400.access.AS400JDBCConnection.send(AS400JDBCConnection.java:2541)
at com.ibm.as400.access.AS400JDBCConnection.send(AS400JDBCConnection.java:2516)
at com.ibm.as400.access.JDCursor.close(JDCursor.java:119)
at com.ibm.as400.access.AS400JDBCStatement.notifyClose(AS400JDBCStatement.java:3272)
at com.ibm.as400.access.AS400JDBCResultSet.close(AS400JDBCResultSet.java:470)
at oracle.odi.runtime.agent.execution.sql.concurrent.FastJDBCRecordSet.close(FastJDBCRecordSet.java:124)
at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:103)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1066)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$1.run(DefaultAgentTaskExecutor.java:49)
at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor.executeAgentTask(DefaultAgentTaskExecutor.java:41)
at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doExecuteAgentTask(TaskExecutorAgentRequestProcessor.java:92)
at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.process(TaskExecutorAgentRequestProcessor.java:83)
at oracle.odi.runtime.agent.RuntimeAgent.startScenario(RuntimeAgent.java:433)
at oracle.odi.StartScen.run(StartScen.java:229)
at oracle.odi.StartScen.main(StartScen.java:343)Hi,
In which step, it is giving error. did you check the source and target connection properly when this problem arrives.
Thanks -
Does not automatically connect to wireless network anymore
Mac Book does not automatically connect to know networks any longer.
Hi sashton,
When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M. -
my iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?
ThanksSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Iphone 4 does not stay connected to my network
Since upgrading to 6.1, my iPhone 4 does not stay connected to my network. I have to input my password each time I leave my house. My other devices stay connected, so the issue is with the upgrade. Has anyone found a way to keep their IPhone connected to their network? Thanks.
I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.
-
Iphone does not stay connected to wi-fi.
When using apps or when in sleep mode my iphone does not stay connected to my wi-fi. All other items within the house have no issues with staying connected to my wi-fi.
By design, when entering sleep mode, the iPhone will disconnect from WiFi to conserve battery. If you want the WiFi connection to remain persistent, plug your phone into a power source.
-
User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh -
I upgraded my iPhone 4S to iOS 7.0.2 and now my phone will not auto-connect to the home wifi network. Each time I leave and return to within range of the network I have to remember to manually connect, otherwise it continues to use 4G for data. The credentials are saved (all I have to do is tap it to connect) but just won't happen automatically any more.
Is anyone else seeing this problem?Tried the reset multiple times. No go. Before the IOS 7.0,2 update my devices were connecting to home WIFI eventually.
-
IPad (3rd generation) does not automatically connect to wi-fi.
iPad (3rd generation) does not automatically connect to wi-fi. It is fully updated to 5.1.1 but you have to manually connect after turning off and back on. I also have an iPad 2 with the same OS but it automatically connects. The wi-fi has no security.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Adobe Connect does not show tool pointer/cursor when sharing Photoshop...
I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
Thank youI just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.
Maybe you are looking for
-
How to download Pages 4.3 to replace the flawed 5.2
Pages 5.2 may well have a lot of nice new features but given that it is now 30% fatter why has Apple removed essential features without publishing any warning about such excisions. 5.2 is very likely to ruin any 4.3 file you open, worse it stops 4.3
-
Just my opinion about the new iTunes 7
Hi everybody! I have like thousands of you out there downloaded and installed iTunes 7 last week. Worked out fine, had no problems with my library. But there is one thing that I miss very much... The user friendly side of the previous iTunes. I just
-
hi, whatever i'll try i can't change my email adress and neither my password! can some moderator take a look at it? Regards, Arnoud
-
Separate notice per dunning level check box
Hi While do FBMP Dunning customization, I have not selected the "separate notice per dunning level check box" and saved the Dunning procedure in Transport and released from Development system. Whereas while do assinging the dunning procedure in the C
-
Does ADF Business Components work well with tables without primary Key?
We have tables using unique index without primary key. Can ADF Business Components relate business objects based on the unique index columns of the tables?