Wierd Rhomba Is

HI all,
I've had the 28MB rhomba for some time with no problems till now. I've always upgraded the firmware and things have worked out ok.
Until recently when my computer stop recognising the Rhomba. Im not sure why. I first thought it was a cable issue, but you can see it charge (but not like it does when the computer recognises the player). Let me explain.
When the computer recognises the player it says connected and charging with the charging percentage printed.
Now when I connect the cable to the computer it powers on the player (without me having to press the play button) and takes it to the main MP3 playing screen. The small battery display on the top right corner then starts charging (like the cell phone displays). So the cable it probably ok.
I then formatted the player, did both a full and quick format. but the computer doest still not reconginse the player.
I tried this on 3 different computers with differnet operating systems (win XP, 2000, 98 and even Fedora Linux) all with the same problem.
Any help would be appreciated,
Thanks a lot guys.

Thanks a lot for helping me out guys. I couldnt have done it without you.
I was just about to throw my rhomba in the trash can and swearing never to buy another creative product when I just for the heck of it started recording some voice onto it. I played back that voice recording and lo and behold when i plugged it back into the computer I was able to see the player.
Another software glitch I guess cos earlier the player was empty after the format and it couldn't even be recognised.
Works fine now, so im keeping my fingers crossed. Im still never buying another Vreati've product tho.!
Hemant

Similar Messages

  • 2nd monitor through mini-dvi to dvi gives wierd tinge around window

    My Samsung monitor, which before using with my new Mac, produced a beautiful picture. Now that I just hooked it up with the mini-dvi to dvi toggle, any window that shows up on the Samsung has this sort of wierd glow,tinge surrounding the whole window. Like an aura. I tried to tweak the profile ,brightness etc to no avail. I think the toggle I bought was from Belkin )looked exactly the same and much less expensive than the Apple product).I doubt it that is the culprit. Anything that I can do to get a crisp and true reproduction of whatever I might place on that matter? Settings that I should look at? Or should I , in general be not expecting anything so great by using the second monitor. Thanks
    Message was edited by: Stoker

    My apologies,,the product is Dynex http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000F S10090979&catid=25607
    and it is slightly under Apples price (Don't know why salesman gave me somce ridiculous $40 plus price!, Wait a minute,,I just went to the same site and it mentions a price of $52 !! http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000F S10084484&catid=12503 are they nuts?

  • Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

    Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

    Hi erastyle,
    Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
    Windows:
    C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
    Once downloaded please follow this KB article to use the Tool.
    http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
    Please let us know if it helps.
    Regards,
    Abhijit

  • Wierd Behaviour of IF then ELSE standard function

    Hi All,
    I am facing a very wierd behaviour of the IF then ELSE function in a mapping.
    Condition to be checked:   if GDS_id = 1, then (condition 1 -  RFC lookup ) ElSE (condition 2 - JDBC Lookup followed by an RFC  lookup).
    Issue:  The input payload is 0-unbounded with a possibility of a different GDS_id values.
    Case 1 :
    As shown below, in case the input payload has 3 repitions of the RECORD, with the Fit set having GDS_ID = 01, the mapping runs perfectly fine . All the If then Else branches are getting executed.
    Case 2:
    Where as iF the first GDS_ID != 01 (not 01) , thenthe target value is not getting populated properly .
    I have tried all the possibilities and combinations but i am unable to resolve this. Please help.
    Attached the screen shot of the message mapping, and sample test results of both the use cases.
    For instance, below is a sample payload:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:mt_EMERGO_common xmlns:ns0="http://sabreEMERGO_common.com">
    <Record>
          <booking_date>08012013</booking_date>
          <iata_code>2325540</iata_code>
          <gds_id>01</gds_id>
          <pos_code>RD3A</pos_code>
          <gds_code>01</gds_code>
          <net_booking>11</net_booking>
       </Record>
    <Record>
          <booking_date>08012013</booking_date>
          <iata_code>2325540</iata_code>
         <gds_id>02</gds_id>
          <pos_code>54S8 </pos_code>
          <gds_code>02</gds_code>
          <net_booking>11</net_booking>
    </Record>
      </ns0:mt_EMERGO_common>

    Hi All,
    I have changed the message mapping like below. Even though i am not getting my target filed as value. As per my requirement if GDS_ID=01  then perform the RFC lookup and pass the value to target fields KUNNR and else GDS_ID=02 then perform the JDBC LOOKUP and JDBC LOOKUP output to RFClookup .RFC LOOKUP output pass to my target field KUNNR.
    Result of my mapping is 1st record only populated KURNNR in Target side and 2nd record not showing as KUNNR filed in target side .But I have taken look on display queue in If then else out showing 2 values but it is not passing to target filed.
    Please provide any suggestion to resolve this issue.
    Please find the mapping logic:
    Please find the test screen:
    Please find the test Data:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:mt_EMERGO_common xmlns:ns0="http://sabreEMERGO_common.com">
       <Record>
          <booking_date>08012013</booking_date>
          <iata_code>2325540</iata_code>
         <gds_id>02</gds_id>
          <pos_code>54S8 </pos_code>
          <gds_code>AA</gds_code>
          <net_booking>11</net_booking>
       </Record>
       <Record>
          <booking_date>08012013</booking_date>
          <iata_code>2325540</iata_code>
          <gds_id>01</gds_id>
          <pos_code>RD3A</pos_code>
          <gds_code>AA</gds_code>
          <net_booking>11</net_booking>
       </Record>
    </ns0:mt_EMERGO_common>
    Regards,
    Ramesh

  • My computer is acting wierd and i want to transfer all my itunes to anther comp. how can i do this i dont want to lose two ipods and my iphone!! help!!

    my computer is acting wierd saying it cannot start up properly, I am getting wrried that it may crash, how do I get all my itunes,..music..movies..pictures etc for all of my devices on to another computer?  is Icloud only for music? what about phone contacts

    There are a few methods described on this page for how to copy your iTunes content between computers : http://support.apple.com/kb/HT4527
    For syncing your devices to that new computer, these two articles might be of use
    syncing with a new computer : https://discussions.apple.com/docs/DOC-3141
    recovering content from a device : https://discussions.apple.com/docs/DOC-3991
    If the photos are those that you've synced to the device from your computer then you will need to copy the directory that they are in on your computer. If they are photos that you've copied from your device to your computer theg you can also either copy their directory, or (if they are still on it) re-copy them from the device onto the new computer (photos to computer).

  • I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. Bad job testing the software Apple.

    I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. What's the fix? None of the recommended fixes work in any of these devices. Reset device, reset network, renew lease, etc. None of them work.

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Wierd problem with web start in windows 7

    I have a wierd problem with my web start app in windows 7, it just hang it self. it work fine in windows XP and Vista.
    The wierd thing is that i can open the app but when i press on a specific button that will make a jlabel present a .png image everthing crash. why do i get this problem now? when i start the app, i load some pic i jlabels and that seems to work fine, but when i do it under the exection it seems to crash, why?
    Should i do something different to make the app work in windows 7?
    I hope someone can help me out!!

    You should:
    a) open the console (java control panel, advanced options) and see the stackTrace (if any). If it's not there check for swallowing.
    b) post a code snippet, to at least show how and where you retrieve the png. Possibly a SSCCE.
    c) check if this happens also running as a standalone app (may be more Swing-related than JWS-related).
    Bye.

  • Forms 6i, Stacked & Tabbed Canvas- Wierd behaviour

    Hi,
    I am having a wierd problem:
    Scenario:
    I have a datablock of 40 columns.
    I put 1 (say col-1 on page_1 and col-21 on page_2) column each on two different TAB pages.
    I created 2 stacked canvases: page_1_stacked & page_2_stacked
    I put col-2 to col-10 on page_1_stacked
    and col-22 to col-40 on page_2_stacked
    I used the following code to show/hide the appropriate cols/stack canvases when the users changes Tab pages:
    [when-tab-page-changed
    if (:system.tab_new_page ='PAGE_1')
         then
         show_view('PAGE_1_STACKED');
         hide_view(''PAGE_2_STACKED'');
    elsif (:system.tab_new_page ='PAGE_2')
         then
         hide_view('PAGE_1_STACKED');
         show_view(''PAGE_2_STACKED'');
    end if;
    Problem:
    Everything seems to work fine, the stacked canvases show/hide as expected, but --->as soon as I put my cursor in any column on TABBED PAGE (here col-1 or col-21), all the stacked canvases vanish
    -->if as a result of above case where I put the cursor in a tabbed-page col and canvas vanished, I navigate to the next field (which is on canvas), the canvas shows up (which is normal)....but then this canvas wont get hidden with my hide view... and end up with all stacked canvases shown together or none at all
    I have played around with all the properties and am really trapped.
    Please help!
    Thanks.

    Devang, are you aware that if you put the cursor focus in a field, Forms will ignore any show_view or hide_view commands if they cause the cursor to disappear? And if your cursor focus is in a field in a stacked view, hide_view will not work. Forms will not let you hide or cover up what ever item is identified by :System.Cursor_Item.
    I do not know why you need Col_1 or col_21 on the tab canvas. Put them on your stacked canvasses, too.
    Use a when-new-item-instance block-level trigger to determine which tab page should be displayed. If :System.trigger_item = col_1 through col_20, make sure Page_1 is displayed, and for col_21 through col_40, make sure Page_2 is displayed.
    Similarly, use a when-tab-page-changed trigger to move the cursor to the correct canvas. You wouldn't even need to use show_view or hide_view, Forms will do that for you each time you move into an item on either canvas.
    And why are you using two canvases anyway? Since you are using a horizontal scrollbar, why not put them all on a single canvas? (And then you wouldn't need the tab pages.)

  • Wierd monitor compatibility problem

    Hi all,
    Got a wierd monitor compatibility problem. G3 works fine on a sony 21" CRT.
    Connected it to a Daytec 15" CRT which works fine with a windows 98 PC.
    With the G3 I get the apple and the spinning up logo then the screen just goes blank.
    Is this monitor PC only or something? It is an old monitor but I thought any monitor should work
    if the vga connector fits?

    So you are using this directly plugged into the stock Display card in a Blue & White G3 with NO adapter?
    The Mac is probably still set for a higher resolution that the SONY can do, and has not noticed the display has changed.
    Video pros says that Video can be plugged and unplugged all day long with no bad effects. If your old display is still around, try setting it to 640 by 480, save changes, and swap the other one in "live" at that resolution.
    Other tricks:
    Reset the PRAM. This will send you back to a default setting while booting up, but may change when the system becomes active.
    Boot from a CD. This ignores the settings on your Hard drive, and boots to a very simple resolution like 640 by 480 to ensure that Most Macs can start up with it.

  • My Rhomba is not working..JUST HELP ME!!!!!!!

    I have read all rhomba faq's and stuff like that, but my player is not starting anymore... I formated my player because it deleted like 4/5 for my songs and showed me that my player memory was full.. after then, i formated it with normal right click formating, and then my mp3 player started to say: BuilddupL2PTable
    ulcnt0=0x000000002
    wrong uLBAAddrress
    player has iprover mode
    please wait for a moment
    CREATIVE
    English only font
    please download firmware from:
    www.creative.com
    I tried to download all firmware's but its not helping... i have windows 2000 nt, and it's not recognice( or what ever that word is..) my player.... i have tried everything, pls help me...
    Message Edited by mastermigi on 06-8-2005 08:24 PM

    mastermigi,
    Check the knowledgebase article SID2359. Look under 'How do I reset/format my Creative Rhomba?' Format the player using this method and then download the firmware from the download page to update the player.
    Jason

  • Aspect ratio not working properly, and also, my final dvd has wierd ghosting

    Hi,
    I just can't seem to make a project work with encore. It's very touchy it seems. I have several videos that I tried to put together in a dvd, but I was having problems with the aspect ratio. Even when I used "Interpret Footage", the videos would incorrectly scale, most of the time to 4:3. At first they would look fine, but after transcoding, they would distort and sometimes be cropped on the 16:9 timeline I was using, or sometimes they would pop to 4:3 with black bars on the side.
    It seems Encore NEVER gets what kind of video I'm using, even when I manually set the PAR in the Interpret Footage dialog.
    So my solution was to bring everything into After Effects, render it back out as uncompressed AVI and use encore to make a dvd image which I then burned. My settings for this movie were 720x480 with a 1.2 PAR. The wierd thing is, I rendered two movies out in this way, Encore understood that one of them should be widescreen, but not the other. What gives?
    I still had to do some tricks in Encore to get it to understand that these should be widescreen movies, and when I finally got them transcoded and looking right in my 16:9 timeline, I made an image. Then I burned it. Then I looked at it on a tv and I swear, every piece of text and or image had haloing on it.
    Can someone tell me if this is a problem in my workflow? Encore is so confusing, I just want to know what the best method to making a simple dvd is. I don't want menus or any of that, just a dvd that loops. I can make one, but the quailty sucks. can someone tell me what I am doing wrong?
    Thanks in advance,
    Stan

    I think I'm onto something. I exported form After Effects as an Mpeg2-DVD so I end up with
    *.m2v files.
    I had set those in AE to be 16:9 aspect and when I imported them into Encore they popped right into my 16:9 timeline with no problems. and the final build went way easier too, way faster.
    Then I looked at my dvd on the tv and it still didn't look so great. But when I compared it with similar dvds that others had done, theirs had jagged edges on text as well and I thought, is this because I'm using Standard Definition?
    I'm very new to this, so maybe I'm expecting too much. My images on the dvd play back fine on the TV, but the text doesn't look great.
    Also, maybe I'm not sure how best to set up my video. When I play my movie back on the TV (A Samsung) and I select the pictures size of 4:3, my video is centered with black all around, but it's 16:9. I have to hit P Size two more times taking the TV first to 'widescreen' (which makes my image look stretched), then to zoom which makes my image fill the TV screen. I think some of my quality issues have to do with this scaling. Is there a way to make my dvd fit the full screen on 4:3 aspect on the TV?

  • Really wierd stains when inserting photoshop files into my indesign document

    Dear Indesigners,
    I had encountered this problem before. Then I exported the file as JPEG and printed from there on.
    But now it really bothers me what adobe is doing.
    I am creating a birthcard. There for I designed the background (in indesign with simple lines & circles). Photo with ribbon I designed in photoshop. The circle pattern around the picture is also in Indesign.
    Whenever I print this file from indesign I get really wierd stains on my Photoshop part of the document.  You can verify this in the attachment.
    If I export this and print from there, the stains are nowhere to be seen.
    Is this some weird setting that I have looked over? The Photoshop document is in CMYK format.
    This is the export file:
    This is the scanned, printed file (increased contrast)

    http://indesignsecrets.com/eliminating-ydb-yucky-discolored-box-syndrome.php

  • Get rid of the wierd character \n\r?

    Dear Friends,
    I insert a text data into mysql database as TEXT type. and type some words and press return to go to next line, when I retrieve the data from database, the data shows some wierd characters..like \n\r...How can I get rid of the problem???
    thanks for your help

    I read some posts..and they said just replace \r\n with <br>
    however, I just cannot make the replaceAll("\r\n","<br>") method work...
    it seems a simple problem...but it takes me a long time and doesn't solve it..
    can anyone help me out???

  • Need Help! Wierd loading percentage issue does not work in IE  but in other browsers it is ok, why?

    Hi!
    I have created a little test swf for my client and I have
    encountered a wierd problem because the loading percentage text
    field does not seem to function in IE 6 but the same file works
    fine when viewed in Firefox and Netscape. When I test the movie
    using simulate download in Flash it works well too. Is this a bug
    and how can be fixed?
    Please take a look online:
    http://www.attila.reinhardt.com/clients/accentcom/clientprofiles_cheyney.html
    I have also posted the related actionscript code below.
    Thank you for any help in advance,
    Attila

    << I Tried to post it through this link -
    http://input.mozilla.com/en-US/feedback#sad
    There was no visual clue that it took the feedback - just sat on the screen with my information in the text box. >>
    The same thing happens with me.

  • Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

    hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

    Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

Maybe you are looking for

  • Creating a Webi report from R/3 Data

    Hi Gurus, We are running SAP ECC6 with EHP5. Is it possible to create a Webi report directly from the R/3 (without BW system). I read some where that it can be achieved with Data Federator. Any one has an idea ? Appreciate your help. Regards, Munir

  • How to create a region which should float in a page . (Like as windows cal)

    Hello Friends Using Apex Version 4 +. Oracle database 11g. How to create a region which should float in a page . ie i can move that region inside that page anywhere like as windows calculator. Can anyone please help me. Thanks in advance regards Edit

  • BPM  HTTP Sync - IDOC Async Timeout

    Hi!!! my scenary is using a BPM          HTTP sync <--> BPM -> IDOC my IP receiver            sender1             transforme              sender2 SI_ABS_SYNC         SI_ABS_REQ          OM_ABS_REQ_to_ABS_RES   SI_ABS_RES SI_ABS_REQ                   

  • URGENT! BT line needed for LifeLine Service!

    My parents are trying to get a phoneline installed into a new-build bungalow for my Gran who replies on a lifeline pendant.  They called in the middle of March to order the phone number to be transferred to the new address only to be told the earlies

  • FTP details

    Hello, Am using FTP FM just wondering that from where should i get details which i shall be passing in the FM for FTP_connect USER PASSWORD ACCOUNT HOST RFC_DESTINATION can anyone plz help me out in this. Thanks in Advance. Regards