Wifi connect, still cannot get on the internet

I have read all the infromation that has been poseted. I went into settings 1. general, 2. reset, 3. reset network setting, 4. retyped my password. It says that it is connect but when I go to safari it states it is not connected to internet. I hope I can get some help....

I went through something similar after that last software update and subsequent fix, I had some success with the network reset but still had problems. I finally went and did the complete restore. Wala! almost everything worked much better except for the very quick battery drain. I fixed that by making sure and turning off the wi-fi after every session and making sure any songs I was listening too in I-Tunes were stopped. Amazing difference! My battery lasts about a week now with daily use. Apparently the Touch will keep playing songs until the playlist is finished unless you manually stop it (I have big ones with dozens of songs), and I may be wrong but I think the wi-fi is always searching for a signal even when it's off. The restore was pretty easy. Hope this helps.

Similar Messages

  • My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

    My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC.  I hate to spend another $179 if this is just something I'm doing wrong. Please help

    I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
    If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
    A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

  • Visual internet connection, but cannot get on the internet? Help:(

    Hi people.
    My wife bought me an Ipod touch. This is a long time ago, because I cannot use it with my wi-fi connection home. I took it with me to my parents, and it worked without any problems there. I took it with me to my place, and I got the same problems.
    It says that I got connection and I have the Wi-fi connection icon, but I'm not connected to the net.
    I've tried to connect many times. I've deleted and restarted the thing. I've looked at the IP adress, and it started with 169. I've tried to look at this discussion board, but haven't found any help.
    I'm getting quite desperate, and I would like to get some help. Since I am quite a beginner, I would like a simple answer:) But any help will do great.
    Thank you

    I've looked at the IP adress, and it started with 169.
    This means you aren't actually connected to the Internet; only to your router.
    An easy first attempt at a fix is to turn your router off and then on again.

  • Wifi connected but cannot get access to internet

    Dear all
    I have my macbook pro with ma os x mountain lion10.8.2
    bu I have a problem with connection
    when you activate the wifi it show WIFI CONNECTED
    But umpossible to get acces to internet, why?
    Someone can hel me

    Shutdown the computer.
    Power off the router. Wait a while.
    Power on the router. Wait until all the lights are lit properly.
    Start up the computer. Try to connect to Internet.
    Best.

  • HT4199 I have a Netgear router and have just acquired a Edimax wifi extender.  My MacBook Air sees the wifi signal and can get to the internet through the extender access point.  However, while my iPhone and iPad mini can also see the WiFi signal, not Int

    I have a Netgear WNR2000 router and an Edimax EW-7438RPn wifi range extender.  I have gotten the range extender to work well with my MacBook Air, however, while my iPhone 3Gs and iPad mini can pick up the wireless signal from the range extender, they cannot get to the Internet through it.  No IP Address, Subnet Mask, Router, or DNS appear in the details on either the iPhone or the iPad mini.   How do I get the iPhone and the iPad to connect to the Internet.   It seems that the problem is with the iPhone and iPad, since the MacBook Air works just fine with this set up.  

    Junglemania,
    Go into the setup page of the EW-7438RPn.  Go to Wireless Advanced Settings.  There is a WMM settings.  Make sure the WMM is enabled. 
    This may help you out.

  • I cannot get on the internet by proxy suddently...

    All of the problem happend Suddenly!!!!!!!!
    i met some problem... All of the problem is not appear in Windows
    1. I cannot get on the internet by proxy... I try firefox, google-chrome, konqueror, all of them
    cannot, but opera can. I dont' do anything even upgrade my system.
    2. Even if I don't use the proxy, a lot of website is not allowed to explore, for example: ebay. all of the browser cannot, but opera can....
    3.when I pacman -Syu, it will appear some error:
    error: failed retrieving file 'community.db.tar.gz' from ftp.tku.edu.tw : No address record (no address record)
    but I still can download the package and install, with poorer speed.....
    I cannot use "yaourt" to visit AUR, it may display : curl error
    I still can log on amsn and use bbs.
    how can I fix this problem? Shall I have to paste any information needed?
    Thanks for answering ^ ^
    Last edited by snowwhite777 (2010-05-13 03:07:02)

    ping www.google.com
    PING www.l.google.com (72.14.203.103) 56(84) bytes of data.
    64 bytes from tx-in-f103.1e100.net (72.14.203.103): icmp_seq=1 ttl=53 time=8.81 ms
    Ping www.google.com.tw
    PING www.google.com (72.14.203.147) 56(84) bytes of data.
    64 bytes from tx-in-f147.1e100.net (72.14.203.147): icmp_seq=1 ttl=53 time=5.64 ms
    ping www.yahoo.com
    PING fp.wg1.b.yahoo.com (72.30.2.43) 56(84) bytes of data.
    64 bytes from ir1.fp.vip.sk1.yahoo.com (72.30.2.43): icmp_seq=1 ttl=54 time=137 ms
    ping www.yahoo.com.tw
    PING rc.tpe.yahoo.com (119.160.246.23) 56(84) bytes of data.
    64 bytes from w2.rd.vip.tw1.yahoo.com (119.160.246.23): icmp_seq=1 ttl=50 time=5.64 ms
    when I ping the website that i cannot visit normally
    for example : ping www.gamer.com.tw
    PING www.gamer.com.tw (60.199.217.25) 56(84) bytes of data.
    64 bytes from www.gamer.com.tw (60.199.217.25): icmp_seq=1 ttl=242 time=6.97 ms
    I forgot to said that i cannot use "yaourt" to obtain the information of AUR
    it may display: curl error
    The admin may not change his/her config, because everything is good under windows in the same condition

  • Firefox will not start. Have error message "Failed (unknown reason)". Now I cannot get to the Internet

    I was browsing and was asked if I wanted to update Firefox. I clicked yes. Thought it loaded, but now I cannot get to the internet at all. Now when I attempt to open Firefox and click on HELP, it gives me a Downloading Firefox 3.6.7 - but it will not connect.
    == This happened ==
    Just once or twice
    == I was attempting to load upgrades to 3.6.7 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; InfoPath.1; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

  • I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT

    I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT

    Check to make sure cellular data is not disabled in settings. If it's on, try re-setting the phone. If that doesn't fix it, call AT&T.

  • I have a good connection thru both wifi and ethernet but cannot get to the internet

    I have a good connection thru both wifi and ethernet but cannot get to the internet

    Which model iMac do you have? Which OS system is currently installed on your comp? 

  • I cannot use any server therefore I cannot get on the internet. My ipad can get on the internet. I reset my foxfire to default and now i must have messed it u

    I cannot get online from foxfire. My wifi is working since i have it on my ipad. is foxfire locked up so it cannot allow me to use a server to get on the internet. there is no connection. when i reset firefox to default maybe it did not set up right.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    *http://kb.mozillazine.org/Error_loading_websites

  • My Ipad2 won't turn off.  I've tried the reset method,  holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either.  Help ??

    My Ipad2 won't turn off.  I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work.  I can't get onto the internet via wi-fi either (don't have a 3G card fitted).  All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

    Look at last link.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • After hooking up AirPort Extreme, I cannot get on the Internet

    Just installed AirPort Extreme.  After following instructions and turning power off several times in attempt to reset, I still cannot get back on the Internet. Does anyone have any ideas?

    Can you provide information on the make and model number of your modem?

  • Some devices cannot get on the internet

    I'm at end's wits with my network at home.  We have a Clear modem with only one antenna to their tower (no internal WiFi), cabled to our Airport Extreme (more than 10 feet away).  The Clear modem is annoying and won't let me disable DHCP, so I created a private network with a range of IPs 192.168.1.100 to 200.
    Only four devices will get on the internet, the other 2 won't.  I can ping from them the router and even an external website but not no browser will work on them.
    Any ideas?  It's beyond frustrating.  Is the Airport limited to 4 devices only? That would seem absurd.
    Thanks Nicolas

    Read your router manual.
    How to set WEP/WPA.

  • I have money on account at iTunes. I cannot access it through my games, especially The Hobbit game. It give me an error messages saying there is a problem connecting to iTunes account. I have changed my password now and I still cannot get into the account

    I have money on my iTunes account. I cannot purchase premiums for the games I play! Especially the Hobbit Middle Earth game. I get an error message saying there is a problem connecting to my iTunes account. I have changed my password and still cannot use the account. I purchase my iTunes and App cards at Food Lion and Walmart and don't use a credit card. Can anyone help?

    Try loging out of and back into your AppleId: (Settings app > iTunes&App Stores > [tap on your account] > Sign out. Then sign back in.
    Contact iTunes support: http://www.apple.com/support/itunes/contact/

  • Connected to router but cannot get on the internet

    Hi,
    I have connected my sons laptop to home hub 3 and it is showing connected to router but when we try to connect toonternet we get error message,have tried connecting to lots of different web pages without any joy.
    Laptop will connectto other wireless when we are not at home. Really not sure where we are going wrong.
    Can anyone help?
    Thanks

    Couple of things to check:
    1) Are you using the wireless passkey that is on the Homehub label to log on with?
    2) It could be that your computer has IPv6 selected. Try disconnecting it as follows:
    Select Start
    In the search field type.ncpa.cpl and press enter.
    In the new window right click on your wireless network connection and select properties
    In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
    Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP addres and DNS server address automatically.
    Once done try and connect to internet.

Maybe you are looking for

  • Can I use Normal DVD BURNER or Do I have to order from apple???

    I was just wondering if it is posiible to use the normal DVD Burners you get from PC shops to replace my orignal G5's internal Rom or do i have to order a special one from apple? my old one is playing up abit and i have a external but its annoying sw

  • Date wise user overview

    Hi Can some one help, how do I see date wise user overview which should contain what are all the tcodes that user had performed in a particular date? Thanks in advance. Regards

  • How to use Search help PRCTR_EMPTY in Web dynrpo ABAP

    Hi, I have a requirement to use search help PRCTR_EMPTY as F4 help for an InputField in my application. But, in the F4 help, if I select "Profit Center Via Standard heirarchy" and search, it is giving me the following error: "Sending of dynpro SAPLSP

  • Oracle 9i Database Release 2 Installation, login

    I have just installed Oracle 9i Database Release 2 Personal Edition (Oracle9i Database 9.2.0.1.0) on my home computer, which is running Windows XP Professional. My intent is to use the SQL Plus program to create basic databases for my college class.

  • Can you edit text after saving your file as pdf

    I have recently created a letterhead in Illustrator. Is there a way to change a person name and title after saving it as a pdf file? I heard something about creating a form in Acrobat professsional. I need to print out a letterhead with different peo