Wifi connected but not able to access the internet

I was able to connect to the wifi, but can not access the internet. It shows the blue bars, but for example, I can't log into facebook. My laptop, my blackberry are all connected but I can't get the ipod to work. I have removed and reinstalled the network connections, and even adjusted the ip address, to no avail.

I am not having problems at home, works fine with my home network. In Starbucks or the Airport I can't exactly go change their router settings. I think Apple has a problem here that they need to fix. There is no reason why the Ipod Itouch WiFi settings have to be so difficult, cranky. It shoul dbe able to work more easily.

Similar Messages

I am connected to my Wifi but not able to access the internet

I am connceted to my Wifi but unable to access the internet. Please help!

Despite the WiFi connection sign you may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address when the iPad requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Playbook WIFI connected but not able to access network

Hi,
Have a 32GB Playbook and from new has had wifi issues. Running 2.1.0.1314.
Symptoms are that works fine on a variety of open and secure networks until a point where wifi is showing as connected, it tells me I have an internet connection but no apps or browsers able to access the internet, just unable to resolve host name.
Having trawled the internet I have tried the following fixes -
All methods of rebooting and changing date/time etc.
Deleting the saved network - in fact all networks
Changing various settings etc.
The only fix that works is a complete security wipe at which point it works again until the next time, which has now occurred 5 times.
The onset of each episode of being frozen off of networks seems to be login on open connections. I have it set to ask for connection to a saved network and when accepted the login page opens. However on occasion the login "handshake" seems to get confused and I am left with the device supposedly loggedin but no network access.
No matter what I then do the same issue exists on all networks I try until I do a full wipe.
All settings are standard, websites allowed to access location etc.
Can't register the device for support, get the message that support not available.
Any help appreciated.

UPDATE
After deleting all saved networks and rebooting the PB it failed to connect again to the secure network I had last tried.
However, it did connect to an open wifi hotspot. I am wondering whether I need to ensure that the next network I try after experiencing the issue and doing the above is different to the one I was trying to connect to last.
Is there some kind of residual network memory hang up !
Will update again next time it occurs, which historically has been every 2 - 7 days.

Not able to access the internet SOlaris 10

I have installed solaris 10 and it is in subnet but no router. I was not able to access the internet.
hostname.e1000g0
hostname.hme0
hostname6.e1000g0
When I create the file dhcp.e1000g0 internet works but the hostname becomes unknown.
Can someone please help me ?

route add default 192.168.1.55 (Ipaddress of default gateway)
DHCP able to find it dynamically but once dhcp is off we need to mention it.
Makes it work.

I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

Hello sweetracy,
The following article can help restore and stabilize your cellular data connection.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Cheers,
Allen

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

My ipod touch says that i am connected to my home wifi connection but i can't use the internet. what should i do?

i have an ipod touch and i have gone into my settings and connected to my home wifi. but the little bars that are supposed to come up in the top left hand corner do not appear and i cannot connect to the internet. is it my ipod? or should i look at my home wifi?

One way to isolate the problem would be to try your iPod on some other networks (Starbucks, Borders, Library, Apple store, etc.) If it does not work in those places you likely have a problem with your iPod otherwise it's likely a problem with your network.
Please provide some details on your router make/model, security type being used (WEP, WPA, WPA2), any MAC address filtering configured and whether you are using static IPs or DHCP.

WRT54GS v7: Claims to have connection, but I can't access the internet wired or wireless.

Hello. I recently moved in with another family member, and he already had a linksys router (this one a WRT54G v5) but after our internet speed crashed from around 300 kb/s all the way to 12 kb/s, I knew somethin was up, and I blamed it on his router, which had been kinda "iffy" in the past. So, since I had brought my router (the WRT54GS v7) I decided to take a crack at i installing it. I restored it to factory defaults and ran the CD, as if this router had never been used. Everything went fine, until trying to connect to the internet... It just wouldn't work, even though ALL the indicator lights were lit (on both the router and modem. The modem is a DSL modem, and the model is: Westell C90-610015-06. ISP is Verizon.) Upon browsing the forums here, I found someone with a similiar issue, except they were using a cable modem. Here is the fix that was posted by a user named toomanydonuts: "Your TM502G modem appears to be a standard cable modem (i.e. it is not a modem-router). Therefore your WRT54GS should work at its factory default settings. You need to reset the router to factory defaults. To reset your router to factory defaults, use the following procedure: 1) Power down all computers, the router, and the modem, and unplug them from the wall. 2) Disconnect all wires from the router. 3) Power up the router and allow it to fully boot (1-2 minutes). 4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes). 5) Power down the router. 6) Connect one computer by wire to port 1 on the router (NOT to the internet port). 7) Power up the router and allow it to fully boot (1-2 minutes). 8) Power up the computer (if the computer has a wireless card, make sure it is off). 9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router. 10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser. If you get this far without problems, power down the router. Using an ethernet cable, connect the ethernet port on your modem to the "Internet" port on the WRT54GS. Power up the modem and allow it to fully boot (1-5 minutes). Power up the WRT54GS and allow it to fully boot (1-2 minutes). Power up your computer. Now try to connect to the Internet. If you still have trouble, in your computer, temporarily turn off your software firewall. If you still have trouble, verify that your ethernet card is set to "Obtain an IP address automatically" and "Obtain a DNS address automatically". After you get the router working, you can go back into the router and manually adjust the settings, if needed. If you cannot get "Reply from ..." in step 9 above, your router is dead. If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1. If you need additional help, please state your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back. Please let me know how things turn out for you." So, I tried that. All of it. Including disabling the firewall. Now, the IP address and DNS servers bein retrieved automatically thing I'm a lil sketchy on, simply because I'm not exactly sure how to change that.... What I did also try doing, on top of the above resolution, was to have the WRT54GS clone my PC's MAC address, then restart the router, modem, and computer. This one actually got me excited as the Internet lights blinked a few times, but then still nothing -_- So...is my router dead perhaps? Cuz to be honest, I'm completely open to buying a new router, if needed. Help?

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

Iphone 4 (4.2.1. - 4.3) Wifi connected, but not connected to the internet.

I bought my iPhone 2 weeks ago, never bothered trying to use my wifi. Now that I need it, it won't work.
I was on 4.2.1. 03.10.01, Wifi did not work so I upgraded it to 4.3 thinking it's a "version problem". Now Im on 4.3, nothing is repaired.
When I connect to my wifi connection, it says that I am connected, but whenever I try accessing the internet via Safari, The App store, youtube, weather, maps... it's says that no network was found.
My computer and my siblings ipod/computers/iphones wifi work properly.
Could I please get a solution, and if I go to the apple store will this be solved? I still have a warranty till May I believe.
Thank you

Believe it or not but your problem starts at the router level. When you think you are connected to your WiFi, tap Settings > WiFi > and the blue ">" next to your network name. Your device IP most likely starts with 169.x. This is an internal device IP generated by your iPhone that occurs when your router doesn't complete the DHCP assignment of IP addresses properly.
Try the following (anyone of which may fix the problem):
1. Reboot your router (unplug the power cord for 30 seconds)
2. Reset the network settings on your phone - tap Settings > General > Reset > Reset Network Settings
3. When the phone restarts, tap Settings > WiFi > Other and re-enter your network name, security, and network password.
If you continue to have problems, then it's time to stop using WEP encryption (if you are still using it) and check to see if router firmware updates for your router. If you have to use WEP, set it to 128 bit and use the WEP hex key in place of a password.

HT1937 Since I downloaded ios7 on my iPhone 5 I have not been able to access the internet at all when I am away from a wifi connection.

Since I downloaded ios7 on my iPhone 5 I have not been able to access the internet at all when I am away from a wifi connection.

Is Cellular Data turned ON? See Settings > Cellular Data.

I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

My iphone 4s is connected to wifi but it won't access the internet

My iphone is running on iOS7. It says it's connected to wifi but I can't access the internet. Some apps work like mail and facebook but that's it. Everything else says theres no connectivity. When I turn it off and use 4g they work. I've tried everything from turning off the wifi to reset settings. I don't know what the problem is. Can anyone help?

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use the device again

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming.
I can make calls with WiFi connection but not on the road. Any idea whats going on?

Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
AdaS_VZW
Follow us on Twitter at @VZWSupport

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Wifi connected but not able to access the internet

Similar Messages

Maybe you are looking for