Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

Similar Messages

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

Navigating through photos in single-photo view in iphoto with trackpad is not working after installing new OS Mountain lion

I have recently download new OS Mountain lion on my macbook (white late 2010 model). I had snow leopard before.
On iphoto, when i was viewing my photos in a single-photo view (double clicking on a photo), i was unable to go to the next photo/previous photo using my trackpad. Only way i could do this was by pressing arrow buttons on my key board.
If i remember correctly, i was able to do this by using 3 fingers (sliding left to right or sliding right to left) on snow leopard.
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
I have checked my trackpad setting and everything seems to be right.
Any ideas how i could fix this?
Thank You
p.s. i have iphoto 09

Terence Devlin wrote:
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
This works here - but I'm on iPhoto 11. IIRC it worked on 09 too though.
It's not working for me.

Wireless mouse does not work after installing new batteries

I have a PowerBook G4 and have been using a wireless mouse and keyboard. The batteries needed to be replaced in my mouse. I successfully installed new batteries. The mouse will turn on. The LED blinks. But the mouse is not functioning. I must use the finger pad on the machine. I double checked the battery installation and even set-up the mouse as a device again. When I turn the mouse off, I get a "connection" lost window on the screen. I have tried
clicking the mouse to re-establish connection with no luck.
Any suggestions?

http://docs.info.apple.com/article.html?artnum=86468
I had the same problem today - go to the above URL and follw precisely the instructions - after you delete the current mouse settings from your bluetooth preferences - apparently you have to sometimes reinstall the mouse after changing batteries - however I changed them before and did not need to do this
hope this helps

Whatapp is not working after installing new softwa...

hi.. i am using nokia asha 311phone since last three months. fewdays back i got a phone software update on my mobile from nokia..so i installed it..after that whatsapp application is not working..plz tell me what should i do?????

Try deleting it and downloading it again.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Touchsceen will not work after installing new hard drive

Hello,
My HP TouchSmart 520 - 1047 c PC's hard drive crashed this week. I went out and purchased a new one, installed it, loaded my Windows 8 Pro disc in, and got it back working. The only issue so far is that my touchscreen will not work. HP support says it's a hardware issue and was no help.
Please help.
Thanks,
Mike

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Printer not working after installing new cartridge

have HP D5460 printer. Installed new black cartridge only #564 since I only use black ink. Error message appeared
"Oxc19a0020 turn printer OFF & then ON". Did that and also checked to be sure cartridge was installed properly. It Was.
I can't get the printer to work. What now? Thanks.

The battery is already full. It happened suddenly and started showing low battery sign and sign to charge the ipad. Nothing happening with pressing buttons or even putting on for charging for quite some time.
iPad (3rd gen) Wi-Fi, iOS 7.1

Speakers don't work after installing new software

I have a 2nd gen iPod touch. Before I downloaded the 3rd gen software, the speakers worked perfectly fine. However, basically none of my apps worked anymore and the upgrade was only $5 so I said "Hey. Might as well."
Unfortunately, I can no longer play any music/sounds using the speakers anymore. Without any headphones plugged in, the volume adjust bar doesn't even show up. The side volume control buttons are unresponsive. I know the thing still has speakers, it just doesn't want to use them! Does anybody know what I am doing wrong?
thank you!

I have the same problem... my sound bar works... but no sound... also video starts freezing as well as a few games... restored 8 or 9 times but it still does not work.....

GPS not working after installing new 2.0 and slow iPhone!!!! HELP!!!!!!!!

upgraded to new 2.0 and installed some new application but now by GPS/MAPS doesn't work. when i tap on it 5 seconds later it return back to the main screen and my iphone is slow!!! i rebooted 3 times and nothing and i even deleted the new applications and still nothing!
any suggestions or help would be appreciated.
julio

You are Crazy Latino. You never had GPS capability with your original iPhone. Maps is using skyhook and cell tower triangulation to locate your position.
You can't say that you meant maps when you wrote GPS, and then roll your eyes when you do not accurately present your question and someone answers your original question...
crazy latino.

Apple keyboard not working after installing new monitor

Yesterday I installed a new monitor - HP EliteDisplay E231i - to my Late 2013 Mac Pro. Previously I had been using super old apple monitors. My apple keyboard was working great - I had it plugged into the new monitor itself. I shut down the computer last night. This morning, the Mac Pro won't recognize my keyboard no matter what I do. I tried plugging it into every possible USB port on the tower and on the monitor. Restarted it after moving it each time. I'm currently typing with a Microsoft keyboard, which is working fine. I tried the keyboard in 2 other laptops (macbook pro) and it works fine. Is this a bug specific to the monitor?? I've been running Yosemite 10.10.2 since the last update, and I've had no issues till I switched the monitor out and tried to start the computer after shutdown.
Details: Mac Pro (Late 2013), Yosemite 10.10.2, 32 GB 1866 MHz DDR3 ECC, AMD FirePro D500 3072 MB
Anyone know what's going on?

Try resetting the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Monitor not working after installing new memory in Mac Pro

I installed 4GB of new memory in my first generation Mac Pro following diagram. When I booted the monitor is black. The key board is working but not the monitor. I removed the new memory and tried again but same problem. Any suggestions on solving this problem would be greatly appreciated.

Well no one really buys from Apple and higher density goes into A1:2 then B1:2 and four DIMMs in those is best symmetrical configuration.
You say you tried xyz but not really very specific to me.
Some users doesn't tell much. However sometimes putting all the 512MB (not 500) on one Riser and the 4GB set on other has worked.
If it doesn't work with just the new RAM alone in A1:2 then it is bad or wrong and needs to go back.
And there have been 3-4 article changes on how to reset SMC. Yours has an SMC button. Leaving unplugged alone is a waste and almost useless. Hitting power button while unplugged was added in 2009.
And it could still be your GPU which is common - 7300 or X1900 or 8800GT... or...

Ipad not working after installing new ios 7.1

The battery is already full. It happened suddenly and started showing low battery sign and sign to charge the ipad. Nothing happening with pressing buttons or even putting on for charging for quite some time.

Have you tried resetting the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Problems with Java 1.5+ after installing new "Software Updates".

I downloaded the regular 'software updates', now my macbook pro won't open Vuze, instead coming up with the message " Cannot launch "Vuze Installer". No compatible version of Java 1.5 available." Then it won't let me "Open Java Preferences". What do I do???

This is silly. Just because you don't know Vuze doesn't mean there's no problem with this update. My friends are having the same issue, of course we are looking at possible problem from Vuze's part but we cannot really say this update has 100% nothing to do with Vuze's launch failure, can we?
P.S. Since Vuze is not banned by law, it's still legal to use it. It's up to people if they want to use it for good or bad.
dogquake

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

Wifi connection with 4s not working after installing new software ios6

Similar Messages

Maybe you are looking for