Wifi connection

hi all,
i am not sure if this is just me being a fool or something with phone. i can connect to my home wifi network ok and also the free wifi services in mcdonlads with out any problem but if i find a wifi network with out the little lock symbol next to it and try and connect it wont let me. is there a reason for this?

Anne,
welcome to the Apple discussions.
(It would probably be better if you'd opened a new thread for your question because the original question is marked as answered.)
The password you're asked for is most likely the password that was used to secure your wifi connection (WEP (*not recommended*), WAP or WAP2).
Check the settings for "Wireless Password" on the "Wireless" tab in AirPort Utility.

Similar Messages

  • I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects.  What am I missing?  Can I only use it via a non-password-protected wifi connection?

    I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects.  What am I missing?  Can I only use it via a non-password-protected wifi connection?

    Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here

  • My phone is not working without a Wifi connection.

    I had to get a new cell phone because my speaker phone no longer works. Luckily my phone was still under warranty. Now my phone does not connect wirelessly unless I have a wifi connection. I never had to have a wifi connection in the past to receive and send email, connect to the internet, etc.. How do I fix this problem?

    AnufromVA wrote:
    Now my phone does not connect wirelessly unless I have a wifi connection.
    That surprises you?
    I never had to have a wifi connection in the past to receive and send email, connect to the internet, etc.
    Are you trying to say you cannot connect via your carrier's cell network?  You did remember to put the SIM in?

  • I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &T cellular data plan?

    I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &T cellular data plan?

    I have a 1st gen iPhone that I just updated the software to 2.0.2
    Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
    Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
    Anyone???

  • On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Email account.  What is causing this and what do we need to do to resolve it?

    On 3G we cannot send  Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
    We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine.  We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
    Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this. 

    Contact whomever supports the email account and get the correct Outgoing email server settings from them.

  • My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    Never mind, problem solved.  When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually.  Have a nice day @:-)#

  • Toshiba EXCITE Pro - WIFI connection. Authentication failed after update

    Hello.
    Just received this Tablet.
    Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
    After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
    After that i started testing ,Wps connection , No security Wifi etc etc.
    *Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
    After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
    However this is frustrating.
    Maybe you have to sort this out?
    I have seen and other people returning this tablet after having this problem.
    It is not a hardware problem since its working ok before the update.
    Of course tried factory reset twice.
    Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*

    Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
    It requires a complete reset. Not the soft reset from within Android.
    I'll post it here as they will check through moderation I guess.
    Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
    The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
    1. Make sure the tablet is off and not in standby.
    2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
    3. Use the volume buttons to select the white box on the right.
    4. Once selected, press the power button.
    5. Use the volume buttons to select wipe cache partition and then press the power button.
    6. Select Yes and press the power button.
    7. Use the volume buttons to select wipe data/factory reset and then press the power button.
    8. Select Yes and press the power button.
    9. The tablet will now reset.
    If you have any issues after the reset please get back to us as soon as possible!
    Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
    Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
    They needed my name and serial numbers probably to log problems etc.
    Message was edited by: bensimmo

  • Yoga 8 and 10 Tablets - KitKat 4.4.2 - Wifi Connection and Notification

    After upgrading to KitKat 4.4.2, some customers report that sometimes after device awakes from sleep, the Wifi connection does not resume on their Yoga 8 or 10 tablets (B6000-F/H or B8000-F/H). Also, Notifications may not show the name of the connection.
    Please note that Lenovo has escalated internally on this issue. I was personally able to reproduce the Wifi Notification not showing the name of the wifi connection.
    These reports originated from this thread: http://forums.lenovo.com/t5/Idea-Android-based-Tablets/KitKat-roll-out-for-Yoga-Tablets-starting-Jun...
    The original thread will be closed when new threads have been opened by type of issue to assist in reporting and resolution. My personal thanks to the forums members who provided feedback to help identify post-upgrade symptoms.
    Thank you for your patience,
    Amy Tupper
    Technical Resolution Lead, Pervasive Issues
    Lenovo US
    ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
    First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
    Solved!
    Go to Solution.

    I can say that the wifi had not yet been fixed.   My tablet was created after the dates listed for you reported updates.   Mine was delivered in the first week of April 2015, and still had hasn't ups after sleep and wifi problems where it randomly drops the connection.   Can't tell when the connection has been dropped since the tablet still shows that it's connected.  
    Please see the link below for some of us that have come together with the same problems.   We all can't have crappy Internet (especially sebum we have other devices connected that are solid) .   You've responded to one person in the link,  the originator,  but it would be nice to see some response to the remainder of the thread.  Everyone is getting to where they want to return their tablets and I'm sure you don't want to lose the money and reputation. 
    https://forums.lenovo.com/t5/Android-Yoga-Series-Tablets/Yoga-Tablet-2-8-830-Freezing-After-Sleep-Mo...

  • HT4623 What if I have no wifi connection to download software updates on iPhone 4S

    I have no available wifi in order to download updates on my iPhone 4S. Is there some kind of download I can use over the 3G network to update my phone with?

    No sorry to update over the air you need a wifi connection, the other option would be to update with iTunes on a computer. Remember to back up before you update.

  • Poor battery life and WiFi connectivity on iPhone 5s

    I have bought a new iPhone 5s 16GB running iOS 8.1.2 3 days ago. The device that I have got has a poor battery life and WiFi connectivity. I have tried lots of methods given on the internet like turned off the auto-brightness, reset the phone to default settings.
    Then contacted the Apple Care for battery issue. They asked for the diagnostics to check the problem. They said its happening because of the crash of inbuilt app Springboard asked me to try "Set up as new iPhone". Even after doing all these, I am still getting battery not more than 4 hours.
    This is not expected from Apple. Such an awful experience on my first iPhone buying.

    Puneet_Agg wrote:
    I have bought a new iPhone 5s 16GB running iOS 8.1.2 3 days ago. The device that I have got has a poor battery life and WiFi connectivity. I have tried lots of methods given on the internet like turned off the auto-brightness, reset the phone to default settings.
    Then contacted the Apple Care for battery issue. They asked for the diagnostics to check the problem. They said its happening because of the crash of inbuilt app Springboard asked me to try "Set up as new iPhone". Even after doing all these, I am still getting battery not more than 4 hours.
    This is not expected from Apple. Such an awful experience on my first iPhone buying.
    Where exactly did you buy this new 5S?

  • HT4623 Please help me about my iphone5 after I upgraded it into iOS 7.0.4 I got the problem about my connections I can't really have a good connections to my server if I'm in my bedroom and I can't connect to any wifi connection not even searching

    Please help me restor my system in my iphone5 Bcoz I got this problem that I can't connect to our wifi in our home after I upgraded this iOS7.0.4...totally very disturbing and frustrating even my outside I can't search any wifi connections ant my network service when I'm in home is very slow my Rogers network is only 1 bar so even I will open my Data I can't really connect so meaning no network connections when I'm in my Bedroom and No wifi connections too I can only possible got connections when I get near the Reuter of the wifi like now while I'm doing this report but in my bedroom totally nothing and not even connecting when I bring this to Rogers outlet where I bought this iPhone,I can't even search or connect in the store wifi itself...very disappointed this problem last 1week already please help me it never happen before just now after I upgrade that iOS7.0.4

    Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

  • I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

    I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Wifi connection issues with Home Hub 5

    Hi can any body help because I am starting to get very frustrated with the Home Hub 5 and it's wireless connection.
    infinity 2 was installed at my house in the beginning of September, everything worked Ok for three weeks then for no apparent reason the hub kicked out all of my wireless devices (phones, kids iPods, tablets etc) at 6:45 one morning. When I got home from work I rang BT and was told to perform a Pin reset. This seemed to work but less tham 48 hours later at exactly the same time in the morning the hub kicked out all of my devices again, this time I just pressed the restart button on the top of the hub and everything reconnected but the Wifi range within my house had dropped. A few days later the hub kicked all my devices out again (each time it has done this the light on the hub has remained blue showing it is supposedly working OK)
    One evening this week the hub of its own accord cycled through all the colours of lights indicating problems and that it was restarting. Today at 10:15 the hub kicked all my Wifi devices out again. I have contacted BT every time this has happened and told them about the poor range of the Wifi signal.
    I do not want to be restarting/resetting my Hub every couple of weeks i need a permanent solution.
    One of the reasons I switched from TalkTalk to BT when fibre became available was the fact that the Home Hub 5 was supposed to be the best provided router by any of the networks, being the only one that is an AC class router. The thing costs £130 if you want to by one. Quite frankly the £60 TP-Link dual band router I bought when I was with TalkTalk had a better range and was more stable. I would switch back to that if I knew BT's router settings (but they like to keep that a secret)
    I really am beginning to regret switching from TalkTalk. Please someone restore my faith in BT.
    Sorry for the lengthy rant but I hope you can understand why I've ranted for so long.
    Nick

    Hi imjolly
    Sorry its taken a while to reply to your post.
    I wanted to try BT's latest attempt at a solution before i tried your idea.
    Since your reply the Home Hub 5 has dropped the Wifi connection to my devices another three times.
    The second time less than 30hours after BT's so called fix, which was to make sure the 5Ghz channel was not syncing with the 2.4Ghz channel. Tonight it went again and BT's response was to take the router out of smart channel selection and manually select channel 9,6 or 11 on 2.4Ghz and 36,40,44 or 48 on 5Ghz. Well I havent even bothered with that, if the prats at BT would look at their records they would see they have already suggested that.
    This HH5 is the most unreliable piece of garbage i have ever had the misfortune to use. WHY OH WHY did I leave TalkTalk
    I have tonight tried your solution. Fingers crossed that this works.
    Nick 

  • Issues with WiFi connection to Deskjet 3545

    Hi,
    I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
    1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
    2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer,  so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
    3.  Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
    All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

    Hi @DmiBro,
    Welcome to the HP Forums!
    I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
    I would recommend the following guides:
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
    HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
    Hope this information is helpful, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card?

    I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card? All we have is a phone signal in this rural French location. I want to be able to Skype to states from there. We have a friend with a 3G ipad who uses an Orange sim card to do it. I would rather not have to buy an Ipad.
    thanks

    I found out that the data package for one month useage with MiFi is 1G. How many minutes of online time does that correspond to?

  • I have a new Macbook Pro - trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between the two.  I follow the directions but the two computers never "discover" each other.  WiFi connect works but 70 hours is a rough deal.

    I have a new Macbook Pro.  Trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between them.
    I follow the directions but the two computers never "discover" each other - using a WiFi connection works but 70 hours is a rough deal.
    (Mac OS 10.8.2 on both computers)

    Are you trying target disk mode?
    http://support.apple.com/kb/PH10725
    Ciao

Maybe you are looking for

  • IPhone 4 front camera not working!!

    My front iPhone 4 camera is not working. I know for sure its and hardware issue. I I take it to an Apple store, what info will they ask me for, once they find out its an hardware issue. Is it going to be a free replacement? I read previous question a

  • Getting error while accessing the OAF forms in ADF page.

    Hi , I am trying to get/access the Oracle forms on ADF page. I am following http://static.commit-consulting.com/oraformsfaces developers guide for guidlines. while runnign my page getting the error in popup look like java script error. the pop up con

  • Hard drive restore- issue

    I had to restore my hard drive (mac) and reloaded from a Backup (yeah!) but Adobe requires that I Uninstall(done), run a Cleanup (done) and reinstall from a new downloaded DMG file.  (why can't this be easier?) Upon trying to start the install I get

  • 2 different websites on one server.

    Hi. I would like to make 2 different websites on one server. One that's basically a professional website, and the other that's devoted entirely for photos from my travels only. Can someone tell me how I can create two websites and hyperlink one to th

  • Number pad/arrow keys

    I was trying out the arrow keys in the built in laptop keyboard on a program and found that the numlk does not light up but it does on my desktop. Is there a way to use the numlk in the application i am using?