Wifi problem with Mac after upgrade to Mavericks

I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?

I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila!  It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.

Similar Messages

  • Has anyone had problems with burner after upgrade to Mavericks on an iMac 27"

    Has anyone had a problem with the burner after upgrade to Mavericks.  It is hunting not always reading picture files keeps showing a fault when trying to burn a DVD. 

    I am having the same experience.  I just update this morning and now can't get mail.  Did you ever figure this out?

  • Problems with passwords after upgrade to Mavericks

    Hi,
    After upgrading to Mavericks I have problems with passwords. MacOS allows me to log in with my password but when I want to install software it does not accept my password. I can go to the user tab in system preferences and change my passwort there. With the new password it works, but when I change to the old password, I have the same problems. Strange ...
    Thanks for help

    OK. I found the problem (probably it is not related to the upgrade): When I install an application and the installation procedure asked me for a password it switched the keybord driver to a language I only use infrequently. Since my original password contained special characters the change of the keyboard driver was the cause for my typing in a wrong password. When I tried changing the password I used "abc" and this worked since it did not contain any special characters. So everything explained and a bug for Apple to fix.

  • Problems with mail after upgrading to Mavericks

    Hello,
    since I upgraded to Mavericks, I have problems with Mail.
    The mail app doesn't retrieve any mail from my email servers. IMAP or POP or exchange mail no longer work.
    I have these problems on my iMac and my MBP.
    The strangest thing is that I have no more new emails in my icloud account since the upgrade. Not only does mail not retrieve the emails but I even can't see any new mail online.
    On my iphone with iOs7 the mails are retrieved, except of course the mails from the icloud account.
    Has anybody a solution at hand?
    Thanks

    this might help with the gmail problem: http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/?viewall=true

  • Problems with Thunderbolt after upgrading to Maverick

    I have a Macbook Pro.  I just upgraded to Maverick in the last week.   Now my Thunderbolt external monitor won't sync with my Macbook.   They are not operating in tandem.  I've had nothing buy problems with Maverick.  This is just one of many.   Anyone else having this problem?  Thank you.

    You're welcome, and maybe you could share the solution, it may help others.

  • Problem with mail after upgrading to Mavericks

    After upgrading, I do not receive mails
    Send e-mail works fine.

    Hi,
    I not only have the exact same issue, but worst of all the rules do not seem to work any longer (at least not for my Exchange mail account).
    Hopefully it will be fixed along with all the Gmail issues.
    I am going to provide mail feedback in the hope that they pick up on this.

  • Problems with Mail after upgrading to Maverick

    I just upgraded to Maverick and ALL of my saved mailboxes have disappeared. I have months worth of emails stored in the folders and HAVE to restore them somehow. Any help would be appreciated.

    You're welcome, and maybe you could share the solution, it may help others.

  • Problem with iPhoto after upgrading to Mavericks.

    My iPhoto says that I have an upgrade everytime I open it, but when I agree on that nothing is coming up in App Store. I have 9.4.3 and it wants to upgrade to 9.5.  Please help.

    What system are you running, Mavericks? Go to the App Store, log in with your Apple ID and look in the Updates section for iPhoto. 
    OT

  • Problems with Preview after upgrading to Mavericks.

    I just updated to Mavericks. Now when I try to use the line feature (drawing a line on a PDF) in Preview, it instead draws an arrow. How do I draw lines?!
    It shows the line tool as being selected. The arrow tool is no longer even present on the toolbar.

    Thanks for this.  There is no option to select in Tools to draw an arrow in the Mavricks version of Preview (at least that I have found yet). Thanks to your post, I figured out how to draw an arrow.  I hope they get this worked out in the next update.
    Unfortunately, I don't know how to draw a simple line either.

  • Duplicate emails on outlook for mac after upgrading to mavericks

    I was getting duplicate emails on my outlook for mac after upgrading to mavericks
    After reading several websites,  I realise this is a common problem.
    some people suggesting checking " prevent app nap"
    this seemed to work for a while, but is now back again
    it is very difficult to handle, with hundreds of emails downloading each time i log in
    regards
    seema

    Try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    It would always be easier to fix the Mail problems.

  • Problems with Mail after upgrading to 10.9.1

    I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
    Problems I have encountered so far are:
    - I don't receive some e-mails on my Gmail account.
    - I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
    Has anyone encountered the same problems and found a solution?
    Thanks in advance!

    Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
    It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
    Strange thing is I receive mail OK, just cant send.

  • Why does the migration wizard run every time I start up my mac after upgrading to mavericks ?

    After upgrading to Mavericks, I log in as normal but then a migration wizard starts up asking me where I want to import data from and create new accounts. Why and how do I stop it ?

    It could be part of OS X's Resume feature. Any app that is open at shutdown will re-open on boot unless the tick in the following image is deselected when shutting down/restarting:
    Also check that Migration Assistant isn't listed in System Preferences>Users & Groups>Login Items.

  • Problems with Mail after upgrading to MAC OS10 version 10.6.8

    I upgraded to MAC OS10 version 10.6.8 about ten days ago, and have since had lots of problems with mail. Since I upgraded, I have downloaded several software updates, including one for improving the general softeware system of Leopard.  Since this morning, I no longer have the Mail icon in the dock and when I try to open it in Applications a window comes up saying:
    'You can't use this version of Mail with this version of Mac OS X.  You have Mail version 4.5 (1084/1085). It can't be used on Mac OS X Version 10.6.8 (Build 10K549)
    Can I download a version that I can use with this Mac, and can anybody give me the site where I can find this. I have tried without success

    You should consider downloading the 10.6.8 combo updater and applying it again.
    http://support.apple.com/kb/DL1399
    Pondini has a great page about upgrading.
    http://pondini.org/OSX/Combo.html

  • Wifi problem of G560 after upgrading to windows 8.1

    Hi,
    I have a lenovo G560. After upgrading from windows 8 to windows 8.1, I cannot connect to wifi. I was wondering if someon else has the same problem.

    hi amardoukhi,
    Welcome to the Forums.
    Your issue might be similar to this thread. Try the solution that was posted to rollback to an older driver version.
    The solution was to:
    1. Open Device Manager (press WInkey+R > type devmgmt.msc)
    2. On the Device Manager, navigate to Network Adapters > right click on the wireless adapter and choose Update Driver Software
       - Link to picture
    3. On the Driver Update Window, choose Browse my computer for driver software >  Let me pick from a list of device drivers on my computer and choose the wireless card on the list.
       - Link to picture
       - Link to picture
       - Link to picture
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Retired Developer Documentation as from 9.0.3?

    I have noticed that the Developer Documentation is no longer maintained ('The Oracle Content Management Software Development Kit (SDK) Developer Reference was retired with the 9.0.3 release.'). I wonder why and what this means. Firstly, beside the st

  • SCCM 2012 R2 CU3 PXE issue

    Hi, I have a SCCM 2012 R2 CU3 lab where pxe is not working, the clients are able to connect to SCCM server but the download gets stuck on the boot image & then it fails with the following error :- Don't find any specific error related to this deploym

  • How to repeat a process

    hi all, i have one form in tht user needs to enter their timesheet details in one row that is compusory , followed by their expense claims detais in second row , my problem i dont know how many times the user needs toenter their values.. how do i for

  • IPhone 4G Image Problem

    Ok so I recently upgraded to the iPhone 4G after two years of owning a 3G. Anyway, since using this iPhone everytime I try an view an image in Safari it looks extremely low quality and if I save it to my Photo Library it looks just as bad. My picture

  • Compiling a Cocoa program and run - crash at startup

    Hello there! I've got a really strange problem. I've got two different macs (an iMac late 2008 and a MacBook late 2008). I've got on both Mac OS X 10.6.2 and XCode 3.2.1. On both the macs I downloaded the same sources of an i386 application. On the M