Wifi problem with OS8

Please immediately to fix OS8 for wifi connection. even though I already upgrade in to iOS 8.0.2 the problem still same and I'm using iPhone 6.
a lot people in Indonesia be chagrined upgrade into iOS8. We very disappointed about this issue.
thank you for your cooperation.
Cheers

This has nothing to do with Classic. See where to post here:
http://discussions.apple.com/docs/DOC-2463

Similar Messages

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

Since upgrading to ios7 I have intermittent wifi problems with ipad2

since upgrading to ios7 I have intermittent wifi problems with ipad2

You need a larger internal drive and you definitely need to uninstall any Avast product, using the instructions at the developer's website. A 120GB SSD with only 9.6GB free just isn't going to cut it - you need at least 9GB in free space just to run Mavericks and many people suggest that 10-15% of your disk (particularly on a SSD) should be free space.
Good luck,
Clinton

Simple question has any body had wifi problems with there 1st g i pod touch

repeat has any body had wifi problems with there i pod touch 1st g or any i pod touch older models in the last few months

You need to describe your problem. Many users haveposted about diffeent problems. Could it be this problem?
iOS: Wi-Fi or Bluetooth settings grayed out or dim

IPad mini with retina still having wifi problems with iOS 8.0.2 - slow or none. Resetting temporarily fixes problem it very annoying. Please fix Apple! Not up to scratch.

iPad mini with retina still having wifi problems with iOS 8.0.2 - slow or none. Resetting temporarily fixes problem it very annoying. Please fix Apple! Not up to scratch.

I Have followed these steps, and tried others, such as resetting all my network settings. At best these only temporarily fix the problem - wifi still becomes slow or stops. I have other Apple devices connecting fine to my airport express. why is my iPad mini not working? Is it related to the fact it is 3G and I don't have a sim card installed? It is the current top of the range model with iOS 8.0.2. I paid over the odds for the best, and it is almost completely redundant. Apple - I'm losing faith. You need to keep the public better informed and fix this problem fast, otherwise I will leave you for good.

WiFi problem with iOS 7.0.3 and iPhone 5

My iPhone 5 has been working flawlessly with iOS6. After updating it to iOS 7 I have an irritating problem with the WiFi connection at work. Everything is OK for some time, then the WiFi connection just stops working. There is a WiFi icon max signal strength icon but there's just no connection. There are usually no error messages. Safari would just spin the connectivity icon forever with nothing showing on the screen. Facebook won't load anything, etc. Unfortunately the phone won't fallback to cellular. I have to either reset it, or restart it. Sometimes just diabling-enabling WiFi works, sometimes not.
I've read a lot about this problem, it seems to be very common on 4S, however it seems I am alone to have it on 5. I've tried all the suggested solution - reset my network settings, I have even reinstalled my iPhone as a new one and not from my iOS6 backup. It doesn't help.
Note that the problem is not in our WiFi network since my iPad 3 works perfectly and has connectivity at the same time.
Having in mind this is very widespread issue on iPhone 4S which is still not fixed even in version 7.0.3, I am kind of exhausted. I've been a loyal Apple fan but if this doesn't get fix in the next iOS 7 update, I'll probably look other brands finally. It's really such a shame!

You are not alone i am having same issue on my i5 ios7.0.3 but apple is still not responding on the issue several sites and even apple discussion forum is filled with this issue no major fix or trick works as what apple says in its help. waiting for apple to respond on this isuue

Wifi problem with Mac after upgrade to Mavericks

I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?

I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila! It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.

Wifi problems with my iPhone 4S since 6.1.2 update

I thought I had fixed this problem with my iPhone with a change in my home router settings but I did not. Since the 6.1.2 update I have had problems with my wifi connections. I have an Airport Extreme wifi network with multiple airport extremes extending the signal throughout our house. I am only able to communicate with the internet using our wifi network if I am in the same room as the main airport extreme. If I am a room away from any of the routers I get a message that my iPhone "can't join the wireless network". If I am in a room standing near one of the other airport extremes I can join the network, my iPhone will show that I am connected to the wifi network with a full signal but I have no communication with the internet. How I have determined this is by turning cellular off, wifi on & attempted to pull up a web page. When I do this anywhere other than by our main Airport Extreme I get the message that I am not connected to the Internet.
We have multiple other devices on our home wifi network, i.e. other iPhones, iPads, computers, etc. We aren't having this problem with any other of our devices. I am not sure if this is a software corruption issue or a hardware issue. I have not dropped my iPhone or done anything else to it that might have damaged it. I have tried resetting the wireless networks on my iPhone & that has not worked. I have read these boards & have tried the various suggestions, including the one about putting your iPhone in the freezer. (When I told my husband about trying the freezer suggestion he seriously thought I had lost my marbles...)
I would appreciate any other thoughts or suggestions that anyone has.

I have a diff issue!!! I has still able to connect to wifi network I had connected before the update to 6.1.2. But few days back when I tried connecting to a new wifi network and it kept saying incorrect password. The worst thing happened after I look up online for help that say try the " reset network setting" solution!! After I did the "reset network setting" step I bloody **** looses all connection to those network I had connected to before the update and I can't get back connection now. *** did apple still allow their users to update a software that has so many bugs. They should had prevent their users from updating right after they know there are bugssssss..!!!!!

How do I know if I have a wifi problem with my new iPad 3 (it seems very slow) and how does one address the problem with apple if there is one?

I just read about the possible issue that some folks are having with their new iPad wifi (my seemed to be running very slowly but I thought that perhaps it was just me overreacting). How do I know if I have a definite problem, and what is my recourse? Do I need to take it to an Apple store for testing? I have apple care which I assume addresses stuff like this. Thoughts? Thx so much.

Your iPad is covered by the normal warranty for one year. If you have AppleCare that extends the coverage. If you feel there is a problem with your wifi reception visit an Apple store with your iPad for a consultation. Be sure to make an appointment before you go.

Still on 10.6.5 but having wifi problems with Canon MP495

At least I think it is a wifi problem? Love this printer - worked brilliantly since I have had it and not had any issues with it at all once installed properly. However, over the past 3/4 weeks I keep getting communication problems and the wifi button/light flashes during printing and more often than not the printing stops and spits out the paper with only a few lines printed. I then have to pause the printer and resend several times - and I'd be lucky to get a complete print without error 1 out of 5 times. I have not changed position of the printer. The kids laptops with windows 7 did not appear to have this problem until first thing this morning when my daughter needed to print something for school on 'special paper' and guess what - it stopped and spat it out half way through! Any clues as to what to do wold be very much appreciated.

Stressed Mum wrote:
I have moved the printer as the signal was low - 38% and link 36%. It has increased slightly up to 48% but that is on the dining room table now Why would the signal change? It used to communicate without any problems at all - this is very disappointing.
There can be a number of reasons why the change has occurred but the most common is other wireless devices causing interference, and not just from your house. If a neighbour is using a wireless router on the same channel as yours then this can cause interference. A quick fix can sometimes come from turning off the wireless router for a minute and then back on. Many routers will check what wireless channels are being used and select one that is not being used by another router within range. If the router cannot do this automatically then a manual setting of a channel can help.
There are some utilities that can scan your premises for all wireless signals. This can assist with locating an unused channel. The following is an app that I have used for helping friends with wireless issues.
http://www.macupdate.com/app/mac/27740/airradar
Can I confirm that it is actually linking with the pc/mac that sends the print and not the router?
The printer should be linking to the wireless router and the computers should also link to the same router. The printer does not support a direct connection to it from a wireless computer.
I really do not want to have to move the printer every time I/the kids need to use it. I think I'll update to 10.6.6 just to see if that makes a difference and revert soon.
I don't believe the 10.6.6 will resolve this. And you also said that the Win7 computer also had problems so it would suggest there is more of a problem with the connection from the router to the printer.

Airport wifi problems with uverse and gigabit switch resolved

I think there is a bug in airport firmware 7.6 with how spanning tree works in addition to problems with the Uverse router. Having an Airport with a uverse 2wire 3801 and gigabit switch will not work. Putting the extreme in NAT mode with DMZ plus behind the uverse resolved the problem.
Network configuration:
Uverse 2wire 3801 router
    3801 provides prioritization for upstream traffic so skype and VoIP work better when doing a lot of stuff on Internet
Airport extreme firmware 7.6
two airport express 802.11n hardwired to extreme. Set up in bridge mode. All access points have same SSID "create a network" to enable roaming. Ignore anything to do with extending a network. firmware 7.6
two gigabit switches
    Netgear GS608 - 8 port gigabit switch
    Trendnet TEG-S80g - 8 port gigabit switch
    100BT 5 port switch - did not figure into problem
Three Uverse set top boxes wired on Ethernet. They have to be wire directly to the 2wire box to work correctly. See: http://forums.att.com/t5/Features-and-How-To/At-amp-t-U-Verse-modem-setup-Airpor t-Extreme/td-p/2300785
However, you need to be careful to place your own PCs and other internet devices on the network created by your gear (airport extreme in your case), but keep AT&T's set top boxes for the IPTV services IN FRONT of your own router - so they remain on AT&T's provided network.
So it would work like this ...
Network 1: 2wire RG (4 lan ports) -> Any Set tops, and to the WAN port on your AirportExtreme
Network 2: Airport Extreme LAN ports -> to any computers or internet devices (but not AT&T set top boxes).
The RG prioritizes the traffic for your Uverse Voice and your Uverse TV ahead of internet data traffic, as it rationalizes data heading out of your home. If you place your own equipment in that equation (like putting AT&T set top boxes behind your Airport Extreme) the performance and function of your AT&T set top boxes could really flake out on you.
Symptom:
    Everything would be working fine, then intermittently all my wifi access points would stop working. ~6,000 ms latency, dropped packets. Ethernet worked fine. Here is an example of my macbook pinging the extreme when associated with the extreme over wifi with a strong signal.
ping: sendto: Host is down
Request timeout for icmp_seq 23
Request timeout for icmp_seq 24
64 bytes from 192.168.1.64: icmp_seq=25 ttl=255 time=267.051 ms
Request timeout for icmp_seq 26
Request timeout for icmp_seq 27
Request timeout for icmp_seq 28
64 bytes from 192.168.1.64: icmp_seq=26 ttl=255 time=3402.599 ms
Request timeout for icmp_seq 30
Request timeout for icmp_seq 31
Request timeout for icmp_seq 32
64 bytes from 192.168.1.64: icmp_seq=30 ttl=255 time=3060.673 ms
64 bytes from 192.168.1.64: icmp_seq=34 ttl=255 time=24.115 ms
64 bytes from 192.168.1.64: icmp_seq=35 ttl=255 time=31.056 ms
64 bytes from 192.168.1.64: icmp_seq=36 ttl=255 time=39.828 ms
Root cause:
    It looks like the 2wire 2801 router has a problem with spanning tree when interoperating with gigabit switches and airports. There is interplay with the airport.
I did not have this problem until the 7.6 airport firmware. I had been using the Netgear hub for about a year with the extreme in bridge mode. I added the Trendnet hub and upgraded airport firmware at the same time which made fault isolation difficult.
Problem recreation:
Set up airport expresses hard wired to extreme
Connect gigabit switch anywhere to network
Everything OK
Dettach one computer from wifi then reattach, then all wifi stops working. It takes a few seconds for the problem to propagate.
Ethernet still works fine
Problem Resolution:
Connect to 2wire with ethernet
Set 2wire route to have subnet as 192.168.2.x
Set extreme in NAT mode behind 2wire. It will complain about double NAT. Override the warning. Set the subnet to 192.168.1.x so you don't have to change any static IP addresses. Note that 2wire uses 192.168.1.254 as default route whereas airport uses 192.168.1.1.
I set DHCP to start at .10 to leave the lower addresses for assigning static IP addresses to computers I want to expose outside the firewall.
Go into firewall settings. Select airport extreme. Select the bottom setting which is "DMZ Plus". When you go into the airport extreme settings, you will now see that it has the uverse public IP address on its WAN port. NAT port mappings work fine on the extreme behind the 2wire router.

Keeping this very short here is a summary of the actual problem and solution to allow your Apple Airport Extreme to run in Bridge mode on the same subnet as your uVerse settop boxes (if your Layer 2 switch is configurable).
Devices: Uverse, Cisco SG300, and Airport Extreme
uVerse uses Multicast to broadcast video streams between the uVerse network to the settop box, and from settop box to settop box.
X number of Multicast Groups are created based on X number of settop boxes you have. You can see the multicast definitions by logging into the webinterface of the iNid. Each settop box is a member and can choose to display a broadcasted TV stream or not.
Multicast membership is setup by the use of ICMP messages for IPv4 (MLD for IPv6). Each of the settop boxes become members of each others multicast group by reporting up to the iNid (MultiCast Proxy).
In an ideal world a layer 2 switch will track these memberships and only forward a broadcast packet to the ports on the switch to which the settop boxes are connected to. The switch would do these via snooping on the ICMP packets. Most switches by default do not do this by default and simply forward the broadcast packett out every one of it's switch ports.
Here in lies the problem. Problem is that the Apple AES doesn’t do ICMP snooping / filtering and floods the wireless network with these broadcast streams.
In order to fix this you must turn on ICMP snooping and filtering on the switch (or buy a switch that does this). I have a Cisco SG300 and list out the configuration below.
Other notes:
Ensure that all Media renderers (settop boxes) and servers are wired directly off the switch and not attached to any of the Airport Express ports. This way no media transverses the Airport (only control point traffic goes through the WiFi - which is fine). Obviously if the IGMP snooping switch sees any client requesting Multicast streaming traffic on the same port as the WAP, it will add that Multicast address to the forwarding table for that port, and then, yes it could get flooded.
Remember, you need to allow some Multicast traffic through your WAP to allow UPnP discovery to work (assuming that you will be using Wireless control points.)
Read the Multicast chapter in the SG 300 switch Admin Guide as it explains things very well.
Setting up multicast on the SG300s using the WebUI:
1. Multicast/Properties/
Tick enable Bridge Multicast Filtering Status for VLAN 1, and
set the Forwarding Method to IP Group Address for both IPv4 & IPv6.
2. Multicast/ IGMP snooping/
Tick enable IGMP snooping status then select and edit the entry and ensure that IGMP querier status is ticked.
It's essential for IGMP snooping to work that there must be at least one active IGMP querier on the network - if more than one is enabled, they will carry out an "election" to decide which one should be active (normally the one with the lowest IP address.)
3. Multicast Router Port
Set whichever port that is connected to the uVerse iNid to Status which means that it the uVerse router connected to this port is the Multicast Router
4. Multicast/ Unregistered Multicast
set all ports to Filtering. (The default is Forwarding.)
There are a lot of other variables within all the above - the defaults are OK, you should probably leave them alone!
In the config file you would then expect to see the above appearing as something like this:
ip igmp snooping
ip igmp snooping vlan 1
ip igmp snooping vlan 1 immediate-leave
interface vlan 1
bridge multicast mode ipv4-group
bridge multicast ipv6 mode ip-group
interface range gi1-10
bridge multicast unregistered filtering
ip igmp snooping vlan 1 querier
ip igmp snooping vlan 1 querier address <IP-Addr>

Wifi problems with new MacBook Air?

I have just bought a new MacBook Air.
For some reason the Air cannot find one of my WiFi networks called XF11. Its not a problem with the router being too far away because thats in my bedroom where I use the Air. The strange thing is my iPhone, my brothers iPad and my old MacBook find the network straightaway.
On a few occasions over the last couple of days when I have looked at the list of networks available it has briefly shown up but has then disappeared?
Any help would be most appreciated, its very frustrating!
Cheers!
Apologies if this is the wrong category to post this

It's new and in warranty. Please make a Genius Appointment and take it in for service.

Email and WiFi problems with IPad1

Yesterday, I sent out an email on my pc laptop to a group and received 5 bounce backs. When I went to my IPad to check my email account, only one bounce back appeared and after about 5 seconds, it kicked me out of email.
Today, it kicks me out after 1 second. In addition, I am no longer connected to my WiFi and the IPad cannot find a network to connect to - it's stuck in 'Choose a Network' mode. Meanwhile, my pc laptop is connected to my network and there are no problems with my WiFi.
I'm not sure where to start...

Try closing the Mail app completely and the see if it works when you re-open it : from the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A second option is to try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Wifi problem with repeaters - there was an error connecting

so I'm repeating a motorola gateway's wifi signal with a belkin f5d7132..
with the repeater on .. opperating. and doing its range extending magic, my pc can connect to the network, but my mac throws up an "error connecting to network" message.. "trying again" gets me nowhere.
unplugging the repeater fixes the mac up nicely... it's able to connect directly to the motorola gateway..
when I look at all the wifi connections. it show two instances of the "repeated" signal... two "ian" ssids.. I wonder if this duplicity is messing things up for me and my macbooks attempt at connecting to the repeated wifi.. I linked to a couple screen captures of my motorola and belkin config pages..
the one thing that surprises me, is that the belikin router doesn't have an "entry" in the motorola DHCP list.. I'd think the belkin repeater would have to lease an IP address from the motorola, and that lease would be noted in the motorola's dhcp table.. I'm sure there are different schems for repeating..
anybody successed with this belkin in a mac / pc cross platform environment? any magic settings that I'm missing?
here are links to those two screen captures
router - http://farm1.static.flickr.com/159/3950965454ebef30daao.jpg
repeater - http://farm1.static.flickr.com/135/395096541cbe4473870o.jpg

Ok. Got it fixed.
For a real fix:
Try trashing the ~/Library/Application Support/Apple/AirPort folder. This should solve the problem this time and next time.
If you are reluctant to do that, log into your 'test' account. (You do have a test account, don't you?)
Do the update from there.
Apparently we have something corrupted in our support directories for the AirPort device.
I first fixed my problem by doing the alternate log in method and found that all 3 of my devices were needing a firmware update but only the Capsule was reporting an update within my own account.

Wifi problem with OS8

Similar Messages

Maybe you are looking for