Wifi sleeps after installing amber update

I have a Lumia 720 and since installing the update if I lock the screen the wifi connection sleeps aswell hence do not receive e mails or other messages that need GPRS connection and the connection comes on once I unlock the phone.
Is this a known issue?

Check your wifi Advanced settings - is the box for "Keep WiFi on when screen times out" ticked ?

Similar Messages

  • HT5549 trouble putting iMac to sleep after installing this update?

    I can't put my imac to sleep anymore after installing the security update for Java. Is anyone else having this problem?
    Fran

    I had the download file open all the time and closing that has solved (looks like) the problem.  However, this was not an issue while I use the regular mouse.

  • Unable to autoconnect to Wifi network after installing Windows update 8.1 - Toshiba Satellite - Intel Pro/Wireless 3945ABG-netwerkverbinding

    Hello, got a problem connecting to my wifi: every time I start up my Laptop (5 year old Toshiba Satellite L300) the wificonnections are listed but windows is unable to connect to the WIFI. Wificonnection states unable to connect, after running Windows Network
    Control the issue is found en the WIFI connects correctly. 
    I need to run the troubleshooter every time after staring up windows in order to get my wifi running, this is rather annoying..
    Does anybody have a solution? I downloaded and installed the latest driver from intel, and also tried to enter below without any improvement.
    netsh winsock reset catalog (reset winsock entries)
    netsh int ip reset reset.log hit (reset TCP/IP stack)
     see below error report:

    Hi,
    With the google translate, It seems that you are facing with the following problem:
    A network cable is not connected correctly or may be damaged
    Problem with wireless adapter or access point
    For this issue, I suggest you try the following steps:
    Try with another account, or test with another system, another cable.
    Reinstall network adapter.
    Open  Device Manager then Network Adaptors, find the wireless NIC and choose properties then open the power management tab and uncheck the one that says "Allow the computer to turn off this device to save power".
    Test this issue in safe mode with networking
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
    Does this work? and I would be appreciate if you could update the diagnostics with English.
    Regards,
    Yolandac

  • After installing iOS7 update my WIFI is very slow.

    After installing iOS7 update my WIFI is very slow in my iPad 3rd Gen, iPhone 5 and iPhone 4. Is there a fix for this problem? I've reset my modem and AirPort Extreme 3rd gen. Problem still exists. Help

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset Network Settings
    Setings>General>Reset>Reset Network Settings

  • Printing problems after installing Security Update 2015-002

    After installing Security Update 2015-002 on three separate computers on two different WiFi networks, printers on the network are losing their connections to the computers that can print to them. We have experienced this on a network running a Canon printer and an HP printer - both have disappeared on the network although the printer suggests it is still connected to the network. The same thing has happened on a separate network I manage with a single HP printer on that network. I have tried removing the printers, resetting the printers etc. Nothing is working. I can get one print out of a printer when I turn the printer off and then on. Three minutes later the printer is no longer connected to the computer - although still connected to the network. Please Help.

    I think I have figured out that it is in fact the Apple Extreme Base Station that is losing the printer. It is very odd because the printer is connected to the Wifi. My computer is connected to the WiFi and connecting to the internet. The Router for the internet can see the printer. An Apple Extreme is then connected via a network cable in Bridge mode to the router. When I turned the power off the The Apple Extreme and then restored power it all worked. was still working this morning, but again this afternoon I needed to reboot Apple Extreme. It is quite strange that this is happening on two different Networks in different parts of the country at the same time. Maybe the Security Update is somehow affecting/blocking communication with the printer? I just don't know enough. These networks have been up and running with the same printers and computers for years with zero problems - all of a sudden we have the same problem on both Networks.
    Any help will be very much appreciated.

  • I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002.  I don't know if related.  A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar b

    I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002.  I don't know if related.  A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?

    Hi Magsrobby,
    Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Wifi problem after.4.3 update on xperia z

    Hi all,
    After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
    I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
    Here's the problem in detail:
    When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
    Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
    I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
    I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
    As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
    Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
    If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
    Regards,
    Danny
    Sony Xperia Z
    Modelnumber: C6603
    Android version: 4.3
    Kernal version: 3.4.0-ge09aff8
    Build number: 10.4.1.B.0.101

    I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

  • MacBook Pro hanging with blue screen and spinner after installing Software Update

    Hi I was wondering if someone could help me with this current issue. Just a few hours ago I finished reinstalling Mac OS X Snow Leopard in my MacBook Pro. I performed a clean installation as part of a yearly spring cleaning that I do on all my systems to keep them optimized. So there was I downloading some software updates which included the combo update of OSX 10.6.8 and others. The updates finished downloading and the system logged out to install the updates, when the updates finished installing my MacBook proceeded by logging out into a blue screen and show a gray spinner similar to the one seen when you start your Mac. Here's the problem after 2 hours the system is showing the spinner and the blue screen, I think that my computer has just hanged in the reboot process.
    I was wondering what should I do? Do a force restart? Or leave it overnight?
    Also, where can I find any information on what error is causing this issue?
    I appreciate your responses and help.
    By the way, I installed Mac OS X from a USB stick that has the original image of the disk installer that came bundled with my computer.

    Kappy wrote:
    Force a shutdown. Do not restart yet, but first do the following:
    Repair the Hard Drive
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Next, boot into Safe Mode then restart normally.
    Hi Kappy,
    Checked the hard drive after forcing a shutdown and booting from my Snow Leopard Installer USB Key and the status of the HDD says "Verified". I ran the repair and the volume was repaired successfully. Clicked on "Verify Disk" and it says "Macintosh HD appears to be OK". So I ran a second repair and again no errors were reported.
    As suggested I booted back again in Safe Mode and restarted normally. All software appears to have been installed successfully. But I don't understand why my computer hanged and showed the spinner after installing the updates in the blue screen that appears just before rebooting. I am aware that the system shows that spinner after a OS update but the longest it lasts is 30 seconds at the most in my previous cases.

  • After installing the update I get this message on an app from facebook "502 Bad Gateway nginx" what is the issue and what do I need to do to solve the issue?

    after installing the update I get this message on an app from facebook "502 Bad Gateway
    nginx" what is the issue and what do I need to do to solve the issue?

    Hi there, harleygirl.
    A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6

  • Can I get rid of the Adobe folder(s) on my Desktop after installing or updating?

    Can I get rid of the Adobe folder(s) on my Desktop after installing or updating?

    Hello,
    Yes, you can delete it.
    But, the Adobe folder you want to remove is actually the setup for Acrobat. So, you might save it at some other location so that if in future you need to re-install the software, there is no need to download the entire product.
    Regards,
    Anubha

  • After installing security update 10.6.8 I've seen dialog boxes asking me if I will permit certain root processes, e.g. configd, to receive unsolicited messages from the internet. What are the consequences of denying these requests?

    After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd.  I didn't see these dialog boxes prior to installing 10.6.8.  How do I make  informed decisions? In other words,
    (1) Where can I find 25-word summary descriptions of these processes?
    (2) Where can I find discussions of the consequences of granting or denying these requests?
    Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions?  And who expects me to make correct decisions?
    I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

    After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd.  I didn't see these dialog boxes prior to installing 10.6.8.  How do I make  informed decisions? In other words,
    (1) Where can I find 25-word summary descriptions of these processes?
    (2) Where can I find discussions of the consequences of granting or denying these requests?
    Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions?  And who expects me to make correct decisions?
    I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

  • Mac Pro 8 Core will not wake up from sleep after install of 10.6

    I am so bummed that my computer will not sleep after installing the 10.6 OS. Every time I put the machine to sleep, that works, but when I tap a key to wake the machine, it restarts. I tried resetting the SMC by unplugging everything and restarting but that did not work. I have 8GB of RAM and the machine is set up for photography (Huey color calibrator (using USB), Wacom Intuos 4 Graphics Tablet (using USB)... Could it be all of these device drivers? Help!

    Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
     *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • After installing 3 updates from "software update app" today (june,11th) my MacBook Pro doesn't  initialize anymore. Why this is happening? And how do i solve this issue?

    Hello Mac Friends!
    Need some help here!
    After installing 3 updates from the "software update" app today (June, 11th) my macbook doesn' t initialize anymore.
    Is there someone who can help me fix this issue?
    Why this is happening?
    How can i fix it?
    Wainting some feedback...

    Two places to start with that would have been better:
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    Lion Recovery Mode
    http://support.apple.com/kb/HT4718
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.htmlhttp://macperformanceguide.com/Mac-HowToClone.htmlhttp://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    If you have backups, if you can and saved your ML installer, you can start over.
    Prevention and taking a more proactive approach to system maintenance and repair, rather than fixiing a problem (likely pre-existing?) format the drive or partition and reinstall 10.8.1 and restore from backups.
    Never had any issues? freezing? apps crashing before?

  • After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

    after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

    Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
    Also make sure that you are selecting built in speakers for your audio output.
    If that does not fix it try doing a Pram reset.
    Shut your mac down.
    Press the startup button.
    Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

  • All application slow to molasse after Installing Security-Update 2010_007

    After installing security update, ALL applications, all commands in X11 had response times ALL key strokes of the order of seconds to minutes with >93% of system CPU idle. Console displays the message below ever 60-70 seconds.
    11/11/10 4:25:36 PM updatedyld_sharedcache[12] for arch=i386 failed: read failure copying dylib errno=5 for /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib while copying /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib to shared cache
    The solution is a modification of this link
    http://www.macosxhints.ch/forums/showthread.php?t=15517
    Basically, the offending file /System/.../LibLAPACK.dylib is moved from the system directory to a current directory, e.g.,
    sudo mv /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib .
    and then back to the original directory, e.g.,
    sudo mv libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    Problem solved without reboot as system immediately returns to normal. Why would a security update from Apple cause this?

    Andreas, do you have this info in english? I'm having a similar problem, and I want to see if I can solve it; or could you tell me what you did to solve it?
    Here's the message I'm getting every minute from the console:
    updatedyld_sharedcache[1461] for arch=i386 failed: read failure copying dylib errno=5 for /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics while copying /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics to shared cache

Maybe you are looking for

  • Script Error, Continue?"

    When I launch Media Center Deluxe II I have this error: Script Error, Continue? I download the patch but the error persist. I have a windows 2000 with a FX5200 Thx a lot.

  • Toplink Essentials in Jdeveloper 10.1.3.1: production or experientment?

    Dear All, i have a question about the toplink essentials bundled with the jdeveloper 10.1.3.1 production release. Is this version of production quality or just for experientment? is it stable enough to developer application on top of it ?? thanks.

  • Single Page/Spreads

    Hi all, I've designed a publication in InDesign and exported it into Acrobat. My client wants to be able to view the document with the first two pages viewed singly (a cover and then a title page) and the rest of the document viewed in spreads- but h

  • Error when starting Edge Animate

    Need help. Everytime when i start Edge Animate it shows me following error: "the requested url/welcome_to_project_edge/WelcomeToEdge.html was not found on this server" Chromodoris/0.86.412.230 What can I do? Greetz from Germany

  • DDL extraction problem

    Every time I click on the 'SQL' tab to see the DDL for an object the first two lines are: -- DBMS_METADATA was unable to generate SQL. Now using internal DDL generator -- To Test DBMS_METADATA : select dbms_metadata.get_ddl('TABLE','DUAL','SYS') from