Wifi with wpa (radius)

Hi,
i want to connect my printer (HP C4380) to an wpa protected wireless lan, which uses radius as authentication.
is there a way like an firmware update or something like this??
mfg
Stefan

Sorry -- at the moment, wireless HP inkjet printers do not support WPA-enterprise (aka WPA radius). They only support WPA-PSK.
Regards / Jim B
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Similar Messages

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

How can i create wifi hotspot with WPA for windows laptops?

I using Macbook with Mac OS X Mountain Lion. I can't create a wifi network with WPA Protected Access. I can create with 40bit protection access but i can't with windows..

No, not unless Apple introduce it for the iPad 2 in a future iOS update - but until if/when that happens you won't be able to use it as a personal hotspot.

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
Eyal

I tried this! Somebody suggested it in another thread. It did not work, sadly.

Printer can't connect to WIFI with an WPA

Hello , I have an Officejet 6700 Premium.
until last week the printer connected perfectly to the WIFI without any problems.
Today, when im trying to connect the printer through my WIFI that conatins a WPA password, the printer says that the password is illegal ( not correct).
there is no doubt that the password that i entered is correct.
When i turn off the WPA, and i deactivating the WIFI security, the printer connects to my WIFI and i can print again.
I have changed the password of the wifi ( the WPA ) many times, and still could'nt connect.
I dont want to leave my WIFI without a password.
What can i do ??
thaks alot.

Hello @alansk93 ,
Welcome to the HP forums.
I understand that you are having a problem with your printer accepting your wireless password.
I would like to help.
Sometimes 'old' information gets stuck in the printer.
Go into the Settings/Setup menu.
Then go into the Network sub menu.
Choose Restore Network Defaults.
Once this is done, try the wireless setup wizard again.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

IPad WiFi works only with WPA/TKIP, not WPA2/AES

My iPad (like so many others) stopped connecting to my Linksys WRT54G router (which like everyone else's connects fine with every other device, including non-iOS 4 iPhones). The whole reset/restart/restore dance with the iPad/router/cable modem was performed to no avail. By sheer desperation, security protocols were changed, and that's what finally worked.
The protocol to the rescue was WPA/TKIP, curiously enough. (When security is completely disabled ("Open"), the iPad also connects, perhaps expectedly.) The culprit is WPA2/AES (even AES+TKIP). Any iteration of WPA2/AES ends up blocking the iPad from getting the appropriate IP address via DHCP. Once I changed to WPA/TKIP, everything's been rock-solid and fast.
(The only times WPA2/AES worked was when the iPad was first used for a couple days, and a couple days after switching back to WPA2/AES when it started working with WPA/TKIP. Since then, switching back to WPA2/AES no longer works, even temporarily.)
Any idea why initially WPA2/AES worked, and then suddenly stopped?

Ralph Landry1 wrote:
That is a very interesting question ... [involving] the combination of the router and the iPad and their respective implementations of the AES encryption algorithm. The AES algorithm is considerably more complex than TKIP. Why some have problems and not others has to be related to the router and its implementation and the Apple implementation.... t works fine for me connecting with [both] a Verizon FiOS (Actiontec) router [a]nd ... an AirPort Extreme. But there have been a number of posts recently about problems with Linksys and Belkin connectivity.
Tell me about it. I'd been pulling my hair out prior to "discovering (by accident," as George Costanza would say) that WPA/TKIP fixed the problem, and seems to be working fine and fast. Now I'm just academically frustrated (better than actually frustrated) wondering why WPA2/AES is so problematic +with this particular trifecta+ (my iPad, my Linksys router, and WPA2/AES).
Bottom line is there is probably not an easy solution ... and since you do have a strong security protocol that works, keep using it. Very strange that there would be a change in connectivity after a few months, though. Old engineering philosophy, if it ain't broke, don't fix it. If you have something that works, stick with it for now.
Actually, WPA2/AES worked on two (short but notable) occasions:
a) for two days when I first unpacked the iPad, and
b) for two days when I switched back to WPA2/AES upon discovering WPA/TKIP fixed the issue.
So it wasn't two months, which makes more sense. I agree with you that I'm not touching this arrangement for now. What I did have to do was change over the other devices (PCs, Wii's, TiVo's) that didn't automatically adjust over to WPA/TKIP. (To its credit, the iPhone did that on the fly.) Going through each device hurt a little, knowing I was using a less-than-optimal protocol for just one cranky device at expense of every other one--but of course I'd rather everything play nice than be necessarily cutting edge. (It's not like I'm the Pentagon or anything here.)
But also give feedback to Apple:
http://www.apple.com/feedback/ipad.html
Done and done. And thanks for a great and reassuring explanation.
Message was edited by: TashTish

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

Can't connect to wifi with my iPad

can't connect to wifi with my iPad

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can't join any wifi with my iPhone 5

the error message states it states "incorrect password for wifi". I can get on with ipdad and macbook. password is correct. I set the wifi to WPA/WPA2 Personal

Howdy Benjamin,
Here is a great little article about troubleshooting wifi connections on iOS. Named iOS: Troubleshooting Wi-Fi networks and connections it can be found here http://support.apple.com/kb/ts1398.
These sections in particular:
Occasionally while using your iOS device, you may notice unexpected Wi-Fi behavior, such as:
Difficulty locating or connecting to a network
Unexpected Wi-Fi signal strength or disconnects
Unable to access the Internet
Not automatically connecting to Wi-Fi when expected
Follow these steps to troubleshoot the above issues.
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
And
Unable to connect to a Wi-Fi network
Verify that you are attempting to connect your desired Wi-Fi network.
Make sure you are entering your Wi-Fi password correctly.Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Regards,
Sterling

How to share internet by wifi using wpa encryption or mac adress filtering ?

Hello, (and sorry for my English)
How can I share internet (from ethernet) to wifi, with a minimum of security : wpa encryption, mac adress filtering or hidden ssid ?
Thanks,
Vicx

If I understand your question, Internet Sharing doesn't support WPA, only WEP, which is essentially worthless.

Connecting to home wifi with X8 / X10

I wonder whether anyone might be able to shed some light in a minor irritation I have when connercting my X10 and X8 to my home wifi, please? It might well be a router issue, rather than the phones, but grateful for any thoughts. When I try to connect my phone to the wifi, it shows that my home network is available and with a good signal, but when I try to connect, the phone will think about it for a while, try to connect and then come up with a message saying 'unsuccessful'. If I pull the power cord from the router and put it back in, then try to connect the phone again, it almost invariably works and stays connected as it should. The wifi is secured with WPA and the phones will sometimes show WPA and at other times WPA2 or (I think, from memory) WPA-PSK. The phones connect easily to unsecured wifi, in places such as public libraries - and neighbours who haven't put any security on their wifi systems...! At other times, the phone will connect automatically as soon as I get home, presumably when I have forgotten to switch off the connection when I go out. What I'd really like to do is for the phone to do that every time I get within reach of my router (D-Link DIR-615, if that means anything to anybody and is of any relevance) Any thoughts or suggestions, please, anyone?

I did have a similar issue, however I got around this by installing Wifistatic from the Market, getting the phone to forget the network, disconnect and then reconnect power to the router after which I have not had any issues connecting to my router.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

IPad 3 with iOS 6 fails to connect to WiFi with WPA2 and AES - any solutions available?

Hello *,
after upgrading my iPad 3 to iOS 6 it constantly fails to connect to WiFi with WPA2 and AES - hidden or broadcasted SSID - at home and at work because the device does not accept the WPA2 password. This is also the case for my iPhone 4S but both devices did work with WiFi (WPA2 / AES) perfectly with previously installed iOS 5.1.1.
I tried to downgrade to iOS 5.1.1 but it seems to be no longer possible to downgrade for both iPad 3 and iPhone 4S as the certification and signage window for iOS 5.1.1 maybe has been closed by Apple.
Does anyone know about a possible solution to connect to WiFi with WPA2 and AES with iPad 3 / iPhone 4S and iOS 6 upgrade?
Thank you very much for any help and advise.
Best regards from Germany
Matthias

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?

I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?
Thank you.

The Holy Mecha of Wifi
Turn router off then on Try turning your wireless router off then back on.
Change or turn off wireless security You may want to try toggling the settings on your wireless router, switching from WPA to WEP or vice versa, or, as a last resort, turning wireless security off altogether. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
Reset network settings on iPad. On your iPad, open Settings, then navigate to “General” in the left-hand pane. Scroll down and tap Reset, then select “Reset Network Settings.” This will delete any stored WiFi passwords and other information, but may result in a more stable connection.
Adjust brightness upward. Oddly, a number of users have found that they can resolve this issue by simply adjusting the iPad’s brightness level upward and off the lowest setting. To do this, tap Settings, then select “Brightness & Wallpaper” from the left-hand pane. Slide the brightness bar upward, then wait 1-2 minutes and check for an improvement in signal strength. Speculation holds that a power delivery issue associated with the screen brightness affects Wi-Fi.
Change thresholds in router settings. Access your routers configuration screen (for most routers, open a browser and enter the address 192.168.1.1), then change the fragmentation threshold and the CTS/RTS threshold as described here. Some users have found success with the settings Fragmentation= 2048, RTS = 512.
Change 802.11 spec on router. Try changing your router’s wireless spec mode from B, G and N to G only or vice versa. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
Switch routers. Although a far-from-ideal solution, some users have found success with switching to a different wireless router.
Turn off “Ask to Join Networks.” To do so, tap Settings on your iPad, then select “Wi-Fi” from the left-hand pane. Slide “Ask to Join Networks” to off. Speculation holds that leaving this option on causes the iPad to constantly seek networks, resulting in some type of interference with the network to which it is connected.
Forget network then rejoin. Tap Settings on your iPad, then select Wi-Fi from the left-hand pane. Choose the network with which you are experiencing difficulty, then select “Forget this network.” Go back to the previous screen and rejoin the network.
Turn off Bluetooth. Some users report that, perhaps due to interference issues, turning off Bluetooth can boost Wi-Fi signal strength. To do so, tap Settings then tap General in the left-hand pane. Tap Bluetooth in the right-hand pane, then slide to off.

Wireless-Card doesn't not work with WPA/WPA2 but with WEP [Solved]

Hello I have a MacBook (late 2007) with a wireless-card from Broadcam, the card works with WEP and the classic configuration over rc.conf very well. But I can't get the card running with WPA and the net network-profiles.
Here is the link to the driver - http://www.broadcom.com/support/802.11/linux_sta.php
eth2 = wireless-card
eth1 = firewireanything
eth0 = wired-card
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="macbook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(!eth0 !eth1 eth2)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(wireless)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
/etc/network.d/wireless
CONNECTION="wireless"
INTERFACE=eth2
HOSTNAME=macbook
IP="static"
IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
DNS1=192.168.1.1
# Wireless Settings (optional)
ESSID=3Com
#KEY=
IWOPTS="mode managed essid $ESSID channel 11"
#WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
# that is linked to the real $INTERFACE
#WIFI_WAIT=5 # seconds to wait for the wireless card to
# associate before bringing the interface up
USEWPA="yes" # start wpa_supplicant with the profile
WPAOPTS="" # use "" for normal operation or specify additional
# options (eg, "-D ipw")
# see /etc/wpa_supplicant.conf for configuration
Can I set here the WPA/WPA2-Key also? Why here ESSID? Do I need still a configuration in wpa_supplicant.conf?
Thats very confusing and not explained.
WPAOPTS? Do I need to add something like "-D wext"?
/etc/wpa_supplicant.conf
# This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
key_mgmt=NONE
priority=-9999999
network={
ssid="3Com"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="topsecret"
priority=5
# WPA2
# proto=WPA RSN
I need help. Please
Last edited by hoschi (2009-01-04 20:21:58)

fwojciec wrote:If this info is not in the wiki it might be worth it to add it -- it's all detailed in /etc/network.d/examples/complete.example though.
Thats the reason why I was so confused.
My new and well working configuration:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="macbook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(!eth0 !eth1 !eth2)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(3com)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
CONNECTION="wireless"
DESCRIPTION="Very verbose complete wireless example"
INTERFACE=eth2
HOSTNAME=macbook
# Interface Settings (use IP="dhcp" for DHCP)
IP="static"
IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
# DNS Settings (optional)
DOMAIN=localdomain
DNS1=192.168.1.1
DNS2=
SEARCH=
# Standard Wireless Settings
ESSID=3Com
SECURITY=wpa-config # One of wep, wpa, wpa-config, none
KEY=""
# Scans to see if network is available before connecting (reccomended)
SCAN="YES"
# Time to wait to connect to a network. Default 15.
TIMEOUT=10
# Pass *custom* options to iwconfig. Usually not needed (optional)
IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
# Any extra arguments for wpa_supplicant
WPA_OPTS=
# For SECURITY='wpa-config' only - filename of a wpa-supplicant config
WPA_CONF=/etc/wpa_supplicant.conf
# This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
key_mgmt=NONE
priority=-9999999
network={
ssid="Linksys"
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="areulookingatmybreasts"
priority=5
network={
ssid="3Com"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="nomam"
priority=5
# WPA2
# proto=WPA RSN
There are also profiles for the Linksys-Router and for wired cable.
Thanks for the help!
Last edited by hoschi (2009-01-04 20:21:23)

How do i let my iphone connect to my computer wifi with usb ?

As the title stated,
How do i let my iphone connect to my computer wifi with USB ?
The reason is because my iPhone 3Gs wifi having some problem. So i have to use a USB cable to connect to my computer and let my iphone to connect to the internet .
If i don't do this i would have to keep on running out & in to my room & my living room.
My iPhone 3Gs allows to connect to the wifi when i am in my living room, but once i enter my room the wifi won't be able any more. So please help me out please people
I'm not sure about why i can't connect to my Ad hoc even it's so near, but i can connect to my router if i am in living rooms.
Regards,

I believe the next time you sync your phone to itune via the cord, you will have to check the box that says sync via wifi and also enable that setting on your iphone.

Wifi with wpa (radius)

Similar Messages

Maybe you are looking for