Wildcards in Query selection filter

Friends,
We are using BW 3.0B and wanted to have Query selection to accept wildcard characters to material characteristic.  upon searching I could not find the selection option "Pattern" either when I create a variable or at Query user selection 'Selection Options'.  All I see is only following 5 options
1) Single value
2) Greater than or equal to
3) Less than or equal to
4) Greater than and
5) Less than
If anyone has any comments please post it..
by the way this Inobject has NO "Conversion Routine" at InfoObject level..
Regards
Mavi

Hi Mavi,
I hope you did not use the word PATTERN in there..
By pattern i mean the string u r trying to search..
eg: We used TF* in the variable screen to select all values starting with TF..
In case of doc numbers we used 3000* to get all document numbers in the 3000 series..
Hope this makes it clear..Let me know..coz this works for sure..
Ashish..

Similar Messages

  • Query selection filter by using wildcards

    Dear all,
    we have SAP BI 7 and we would like to increase usability of the end-user. We would like to use wildcard ('*') in the variable selection field of a reporting query to make the search/filter easier. Therefore, the search should support at least wildcards or even better the functionalities of R/3 (give results which are similar than to the searched word).
    An example:
    A report shows sales volume per customer and country. The user has to select in the variable selection the customer before the report is showing. As there are thousands of customer listed, the user should be able to use wildcards to list only relevant/wanted (e.g. 'ak*' and should get all customers containing any string like AK, ak, or other variants --> Independent if lower or upper case has been entered in the filter search).
    Question:
    1) How can you enable this wildcard filter function?
    2) Is there any documentation/example available what can be entered and how the result is showing
    Thanks for your support!!!
    Edited by: Markus Reith on Jan 7, 2008 3:34 PM

    Hello,
    When u create a variable on infoobject for selection, select selection option from drop down box of details tab. Now when u execute the report it will give you a box before the input box, select * in that and the wildcard function should work. Just try it out.
    Regds,
    Shashank

  • Query Execution Filter Val. Selection take no effect on query based on AG

    Hi,
    by setting the 'Query Execution Filter Val. Selection' property in query, we can control the value list when we execute the query. with setting 'Only posted value values for navigation', only the data posted to cube can be listed when you do the selection in the Query Execution selection screen and with setting 'values in master data table', all the date will be listed when you do the selection in the Query Execution selection screen.
    1. but for queries based on cube or multi-cube, when i select 'values in master data table' in query defination, still only the posted value is displayed when i do the selection in the Query Execution selection screen. is there anyone know why?
    2. for queries based on aggregation level, whatever setting i choose, all the values is displayed when i do the selection in the Query Execution selection screen. how i can do select the posted value for this kind of query?
    Many Thanks
    Jonathan

    I apologize I meant the other link:
    I will put the useful text from that link here.
    Regarding the query built on aggregation level please note the following
    the aggregation level is always a Virtual Provider built other
    InfoProvider and hence it does not have the dimension table and hence
    the F4 mode D is not supported.
    Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
    displayed in the value list.
    Reference from the note
    984229 F4 modes for input help as of SAP NetWeaver 2004s BI
    4. Since other InfoProviders do not have a dimension table, the system
    displays only posted values if you select "Only Posted Values for
    Navigation". Otherwise, it displays the values from the master data
    table.
    Hope this should clarify your doubts. Please let me know if you have
    questions else please confirm the message at your earliest convenie
    Edited by: Abhijit N on Apr 2, 2009 6:06 PM

  • Select filter value..not opening..query hanging

    Hi,
    I have a queary and it is executing fine. After executing it is displaying data fine. I have company code and two more characterstics in free characterstics section. After executing the report i am doing right click at company code in the excel sheet and selecting the option 'select filter value'. It is then opening the small screen 'selection for company code' but it is not displaying the values. It's keep on running and after some time it is hanging (not responding).
    In the company code object hardly there are 60 values. Can anyone tell me why this is taking long time and result in hanging for just 60 values?
    This company code object is Authorisation relevant checked in the 'Business Explorer' tab. There is a variable used for this comopany code in the query design and this variable is processed by authorisation. But i dont think this is the reason for the issue. If this is the reason could you please tell me how it effects? Please suggest me the solution.
    Many Thanks in advance
    K
    Edited by: kirankumar chandaluri on Jun 17, 2008 5:38 PM

    Hi MA,
    Thanks for your immedieate reply.
    In the business explorer tab for which one you are asking to change the settings?
    Is it for   'query def. filter value selection'
                              OR
                 'query execution filter value selection'?
    The current status is:
    Query Def. filter value selection is 'values in Master data table'                 &
    Query Execution filter value selection is 'only posted values for navigation'.
    This is not cube but this is ODS. For ODS where do we set DB specfic settings?
    Thanks in advance
    Kiran

  • Query Definition Filter Value Selection

    Hi BW Experts,
    This is regarding a navigation attribute restriction while defining a query.
    When we are defining a query on multiprovider / basic infocube and trying to put a restriction from the context menu on a navigation attribute,the screen is hanging and the fixed values for restriction are appearing after 5 to 6 minutes.
    While it should not take so much time, it should ideally display it in few seconds.
    This is happening for all the navigation attributes.
    Please share if anybody has faced this problem before or any suggestions regarding any settings at Infoobject, Basic cube or Multiprovider level.
    Any relevant input would be highly appreciated and appropriate points would be awarded.
    Best Regards
    Praval Trivedi

    Hello Praval,
    it is BW3.5 or BI7.0?
    Webreports or Excel?
    If Webreports check the command "Read Mode" in WAD -> NAVIGATIONBLOCK
    -> Master Data Table = fast
    -> Dimension Table = medium
    -> Posted Values = slow
    Check the InfoObjects
    -> Business Explorer
    -> Query Def. Filter Value Selection
    -> Query Execution Filter Val. Selectn
    regards Sven

  • SharePoint 2013 List View with query string filter stops working after editing view from browser

    I have created one list definition in which I have added one list view which will filter data from query string paramater
    So when I am creating list from my list definition, view with query string filter is working fine.
    But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
    Any suggestion what I am missing?
    Below is my list view schema
    <View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
    <Toolbar Type="Standard" />
    <ParameterBindings>
    <ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
    <ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
    <ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
    </ParameterBindings>
    <JSLink>hierarchytaskslist.js</JSLink>
    <XslLink Default="TRUE">main.xsl</XslLink>
    <JSLink>clienttemplates.js</JSLink>
    <RowLimit Paged="TRUE">100</RowLimit>
    <ViewFields>
    <FieldRef Name="Body"></FieldRef>
    <FieldRef Name="Title"></FieldRef>
    <FieldRef Name="StartDate"></FieldRef>
    <FieldRef Name="DueDate"></FieldRef>
    </ViewFields>
    <ViewData>
    <FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
    <FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
    </ViewData>
    <Query>
    <Where>
    <Eq>
    <FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
    <Value Type="Lookup">{TargetId}</Value>
    </Eq>
    </Where>
    </Query>
    </View>
    I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.

    Hi JayJT,
    The Miscellaneous is located in the contact list that you used for the connection.
    So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Query level filter not working in Webi report

    Hi All,
    I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
    Can anyone suggest me why problem is coming?
    Regards,

    Hi,
    Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
    1. Select the universe in the list of universes to open the Query Panel.
    2. Drag the Year object to the Result Objects pane.
    3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
    4. Click Combined Query.
    The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
    5. Click on the second query and remove the Year and Number of Guests objects.
    6. Drag the Reservation Year object to the Result Objects pane.
    7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
    8. Click Run Query.
    Best Regards
    Naveen

  • WebAn: select filter value on 0plant gives error (but works fine for other)

    Hi all,
    have something strange in the web analyzer:
    i have a query with 0plant in the free characteristics
    when I do 'select filter value' when it's in the free characteristics -> dump
    when 0plant is in the rows and I do 'select filter value' -> dump
    when I do 'select filter value' on 0customer that is in the free characteristics -> works fine
    In the BEx Analyzer it works fine...
    Anybody an idea?
    Ciao
    Joke
    the strange world of BI...

    Hello,
    Is it a 7.0 system? maybe the RSTT trace as per note 899572 can give you more information about this error.
    Thanks,
    Ricardo

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

  • SQL query: select billaddress if no delivery address exist.

    hi sql expert,
    The Query shall filter all invoices by date, articles and show the delivery address. Problem: Not every customer has deposited a delivery address. In this case the billing address is to be taken.
    How can this be done ?
    This query
    SELECT T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], (T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt],substring(T1.Freetxt,0,5) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", T1.[Quantity] FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode WHERE CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]'
    and T1.Itemcode = [%0] GROUP BY T0.[DocNum], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], T1.[FreeTxt], T1.[Quantity]
    UNION ALL
    SELECT T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], -T1.[Price], -(T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt], ('-' + substring(T1.Freetxt,0,5)) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", -T1.[Quantity] FROM ORIN T0  INNER JOIN RIN1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode WHERE CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]' and T1.Itemcode = [%0]
    GROUP BY  T0.[DocNum], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], T1.[FreeTxt], T1.[Quantity]
    Thanks a lot!

    hi,
    I think I got it now :-)
    First: Show me priority all  delivery addresses . Otherwise billing addresses:
    SELECT T1.[CardCode], T2.[Street] FROM OCRD T1  INNER JOIN CRD1 T2 ON T1.CardCode = T2.CardCode WHERE NOT EXISTS
      SELECT *
      FROM CRD1 as T2
      WHERE T2.[AdresType] = 's' and t1.CardCode = t2.Cardcode
    union
    SELECT T1.[CardCode], T2.[Street] FROM OCRD T1  INNER JOIN CRD1 T2 ON T1.CardCode = T2.CardCode
    where T2.[AdresType] = 's'
    secondly:
    Filter all invoices by date, articles and show priority the delivery address else billingaddress and subtract the credits:
    SELECT T0.[Cardcode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], (T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt],substring(T1.Freetxt,0,5) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", T1.[Quantity]
    FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode
    WHERE CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]'
    and T1.Itemcode = [%0] and not exists  (
      SELECT *
      FROM CRD1 as T3
      WHERE T3.[AdresType] = 's' and t2.CardCode = t3.Cardcode
    GROUP BY T0.[Cardcode], T0.[DocNum],T0.[CardCode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], T1.[FreeTxt], T1.[Quantity]
    union
    SELECT T0.[Cardcode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], (T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt],substring(T1.Freetxt,0,5) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", T1.[Quantity]
    FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode
    Where T3.[AdresType] = 's' and T1.Itemcode = [%0] and CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]'
    -- ab hier werden die Gutschriften abgezogen
    union
    SELECT T0.[Cardcode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], -T1.[Price], -(T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt], ('-' + substring(T1.Freetxt,0,5)) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", -T1.[Quantity] FROM ORIN T0  INNER JOIN RIN1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode WHERE CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]' and T1.Itemcode = [%0]
    and not exists  (
      SELECT *
      FROM CRD1 as T3
      WHERE T3.[AdresType] = 's' and t2.CardCode = t3.Cardcode
    GROUP BY  T0.[Cardcode], T0.[DocNum], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], T1.[FreeTxt], T1.[Quantity]
    union
    SELECT T0.[Cardcode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], (T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt],substring(T1.Freetxt,0,5) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", T1.[Quantity]
    FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode
    Where T3.[AdresType] = 's' and T1.Itemcode = [%0] and CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]'

  • Selecting filter value doesn't work

    Hi guys,
    I've a random problem on some bex query when I try to slect filter value on navigable info object of the query.
    The problem is that I can't select filter value because of the message:
    <b><Install error> Missing ActiveX component: Business Expolrer Selektor</b>
    Have you never had this kind of problem? Somebody knows how i can solve it.
    Thank you,
    Marco

    See the below discussion forum
    Error when starting Bex analyzer
    Hope it will be useful.
    Regs
    Gopi
    Assign points if it helps ..
    Message was edited by: Gopi

  • Select filter value error...

    hello,
    In BEx, i cant activate the feature "Select Filter Value". In my web template, i've already set "Always Display" and still nothing happens. Can someone please advice? If i run this report in Query designer, it works fine.

    Hello,
    We are experiencing the same issue as described. In the definition of the web template the option to display the Select Filter Values is selected but in the execution of the web template the option is not available. Was a resolution over found?
    Thanks,
    RB74

  • NW04s(SP7/FEP7)-Select Filter value for HIER in 3.XBexAnalyzer doesn't work

    Hi,
    We went live with SPS 7/FEP 7 and we are having problem in 3.X Bex Analyzer with "Select Filter Value" for charcteristic having active hierarchy(in this case it is using time dependent hierarchy). (For Eg: Organization Unit)
    If I inactivate the hierarchy for organization unit at query level and then execute the query, then "select filter value" works for Organization Unit.
    NOTE: I checked other query using hierarchy (not time dependent hierarchy) and I was able to do "select filter value"
    Please let me know if any OSS note is available for this issue so that we can fix this issue in our Production Environment.
    NOTE: The above issue works in SPS 8/FEP 802 with 3.X Bex Analyzer.
    Thankyou,
    -Sini
    Message was edited by: Sini Kumar

    Hi,
    Did you have an asnwer to your problem?
    We've a similar problem we had a technical upgrade to BI 7.0. But we still work with the frond end tools of 3.5.
    When we select in the Bex analyzer a node in an hierarchy it shows the result, but if want to select an other node we must first remove the old filter. This wasn't when we're on the 3.5 enviroment.
    Maybe if the problem is solved, this can help us.
    Thanks in advance!
    Regards,
    Juriaan

  • Select Filter Value

    This is an on-going performance issue that I am bogged down with.  The best idea would definitely get 10 points and all the other great ideas will be well rewarded for sure!  Please help...
    The reports on our system run very slow (15 minutes on the average) though our cube has just about 10 million records.  What bothers the user the most is that even when they go for "select filter value" on any of the "free characteristics", it takes 10 lazy minutes for the selection screen to show up.  We have indices created on the master data and the SAP indices on the Cube dimensions are supposed to be good enough for faster query/selection screen retreival especially when the number of records are just 10 million.  RSRV test came out to be fine on DB and cube indices.  Any great ideas to improve the time it takes to bring up the selection screen?
    Regarding the general query performance, we already have query cache and several aggregates in place.  We use BEx, so how effective are the reporting agents on top of these?  Please provide some knowledgeable comments to improve the general query performace as well.

    The Select Filter Value time almost certainly has to do with the F4 options you have set for those InfoObjects.  You can change this for the the InfoObject, or change the setting just for the cube using the Structure Specifc Settings.
    Depending on the setting, using F4 for an InfoObject may simply read the Master Data, or it actually interrogates the the master data and the cube to see what values exist, or actually looks to see what values would be available given all the other query criteria.  So as you can imagine, the response time of the options can vary a lot.  
    As far as query performance in general, try searching this forum, you'll find lots of threads.  Also try SDN's Performance Tuning Knowledge Center.
    I'm assuming you regularly compress the cube(s). Have you verified the aggregates are being used most of the time and confirmed the the value of the aggregate by comparing explain plans.
    A lot of issues may relate back to the data model you are using. You can look at adding secondary indices on some of the dimension tables of you have some large dimensions  that get receive full table scans because the BW system built index does not relate well to the query restrictions that are actually used.
    Pizzaman

  • Values missing in Navigation block - Select filter value

    Hi Experts,
    I'm using navigation attribute in query. Query is built over multiprovider. Navigation attribute in query is ZCOMPAN01__ZSALES_RG. In multiprovider I use two cubes as sources and from first cube I assigned nav. attribute ZCOMPAN01__ZSALES_RG and from second cube I assigned SCUSTSAL1__ZSALES_RG.
    When I click in query on funnel to Select filter value I don't see all values which are displayed in query (I see only values from first cube). But when I write the value directly to filter, it is regulary selected. Also I can right click on value in query and set Select filter value, after that I see in filter block all values (from both cubes).
    I tried to change all possible Business Explorer setting of infoobject ZSALES_RG (eg. Only values in infoprovider/ only posted...etc.). I also tried to change setting of navigation attribute (right click on nav. attribute in multiprovider - Provider-Specific Properties), but without success. SID table of infoobject contains all values which I need.
    Do you have any hint how to see all used values in Select filter value?
    Thanks in advance
    David

    Hi Murali,
    Thank you for the response but we know how to set the value, the option is checked and the Select Filter Value still does not show on the context menu during execution. I think the issue is related to a default user exit variable that we use to pre-select a date but still want to be able to navigate and filter other characteristics during execution. There seems to be something to this combination that BW does not like.
    Thanks again,
    Rick

Maybe you are looking for

  • IPod cannot be updated from iTunes 7

    The iPod will not update to version 1.2 from iTunes 7. The iPod will not Restore from iTunes 7. The message I receive is the following. Any thoughts?? The iPod cannot be updated because it contains files that are in use by another applacation Dual co

  • Authorization based on number series

    Hi All is anybody aware of how can we set the authorizations on the basis of number series for a particular user

  • Anyone tried to deploy IBM's Java resource adapter for IMS on WLS6.1sp2?

              Has anyone had success or attempted to deploy the IMS Connector           for Java (IBM's resource adapter) on WLS6.1sp2? I would like to           use this to connect WebLogic to IMS via IMS Connect 1.2?           Thanks           Sam     

  • Bug in WLS 8.1

    Hi, I enable JCOM in WLS 8.1.2 and once awhile I would see the following error message throw by WLS Server. I assuming it's a bug within weblogic. <May 4, 2004 8:49:31 AM CDT> <Error> <Kernel> <BEA-000802> <ExecuteRequest faile d java.lang.NullPointe

  • New to Lightroom- why can't I open two copies of LR?

    I like to have two copies of my past management software open at the same time so I can tag the RAW images that I have processed to tiffs.  I am currently using a trial version of LR to see if I want to purchase it and I cannot open two copies.  Any