Will Adobe be applying their Premiere CS6 Sync fix for MP4 and WMV exports to CS5?

I noticed that Adobe FINALLY fixed the sync issue for WMV and H.264 MP4 exports in their latest CS6 release.  This is very much overdue. Given that all of us who paid good money for CS5 have had to live with this issue for more than a year, will Adobe be applying the same fix for us?

I also never have had any synch issues with WMV and H.264 MP4 exports (or anything else) in any of the CS versions.
I also have never noticed any posts regarding this as an issue either ...so not sure who  ..
...all of us who paid good money for CS5 have had to live with this issue for more than a year
...would include.

Similar Messages

  • I have noticed that on iPad 3 while running iTunes it will sometimes freeze it their a soft ware fix for this

    I have noticed that on iPad 3 while running iTunes it will sometimes freeze it their a soft ware fix for this

    1. Double-click the Home button to close all Inactive Apps in Task Bar
    2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
    3. Tap the minus sign to close App
    4. Tap center of screen to return to Home Screen
    5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo. Ignore the red slider

  • Audio sync fix for .mp4?

    hi,is there a way of fixing the audio to the video for .mp4 files?

    I also never have had any synch issues with WMV and H.264 MP4 exports (or anything else) in any of the CS versions.
    I also have never noticed any posts regarding this as an issue either ...so not sure who  ..
    ...all of us who paid good money for CS5 have had to live with this issue for more than a year
    ...would include.

  • Adobe Cs6 design standar for student and teacher

    I want to buy adobe cs6 design standard for student and teacher but i want to make sure, "Will I be able to instal my software in my three computers"?

    All Adobe software can only be activated on a maximum of two computers at any one time and it can be only used on one of those computers at a time.
    http://www.adobe.com/products/eulas/pdfs/Gen_WWCombined-MULTI-20111031_1230.pdf
    2.1.3 Portable or Home Computer Use.
    Subject to the restrictions set forth in Section 2.1.4, the primary user of the Computer on which the Software is installed under Section 2.1 (“Primary User”) may install a second copy of the Software for his or her exclusive use on either a portable Computer or a Computer located at his or her home, provided that the Software on the portable or home Computer is not used at the same time as the Software on the primary Computer.

  • Can i get a new serial number for Adobe CS6 Design Standard for Students and Teachers?

    I have had to re-install my Adobe CS6 Design Standard for students and teachers after having problems with my computer (MacBook Pro)
    I am wondering if there is a way to access my old serial number from when I originally installed CS6, or do I have to start over again and get a new serial number?
    Help is greatly appreciated!!

    You normally use the same serial number that you are first issued.  If you registered your product when you first installed it then you should be able to find your setial number available thru your Adobe account online.

  • Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

    Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
    Picture below, many thanks for your help.
    Jason

    Back up all data before proceeding.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    Start up in safe mode to rebuild the font caches. Restart as usual and test.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
    If you still have problems, then from the Font Book menu bar, select
              File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • We are unable to validate this serial number for adobe lightroom. I just purchased the upgrade for lightroom and keep getting this message upon installing

    We are unable to validate this serial number for adobe lightroom. I just purchased the upgrade for lightroom and keep getting this message upon installing

    contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

  • HT1688 Since I've upgraded the IOS to 7.0.2 on my iPhone 5, my phone will randomly restart itself.  Is there a fix for this?

    Since I've upgraded the IOS to 7.0.2 on my iPhone 5, my phone will randomly restart itself.  Is there a fix for this?

    Howdy there Tuna241,
    Thank you for using Apple Support Communities.
    It sounds like your iPhone is restarting unexpectedly after the update to iOS 7.0.2.
    I recommend the steps outlined in the article named:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards,
    Sterling

  • Adobe QT32 Server.exe Premiere CS6 Pro and Media Encoder

    Hi,
    Been having intermittent issues with this. I'll be trying to render, or even just scrubbing through a clip in the timeline and Adobe Media Core CS6 has stopped working pops up:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe QT32 Server.exe
      Application Version: 6.0.5.0
      Application Timestamp: 5211c5c2
      Fault Module Name: ntdll.dll
      Fault Module Version: 6.1.7601.18247
      Fault Module Timestamp: 521ea8e7
      Exception Code: c0000029
      Exception Offset: 00090892
      OS Version: 6.1.7601.2.1.0.256.48
      Locale ID: 2057
      Additional Information 1: e8ad
      Additional Information 2: e8adce1c2b9e7be834b4063ac3c53863
      Additional Information 3: e8ad
      Additional Information 4: e8adce1c2b9e7be834b4063ac3c53863
    Doesn't always do it, but now I've found an instance where it's reliably repeatable. As I scrub through a certain part of the footage, it crashes. Or it crashes at the same point during rendering.
    I've succesfully edited and rendered clips made from the same cameras, recorder (Tricaster 410) - even from the same actual media file. I've tried updating QuickTime, uninstalling, reinstalling QuickTime, doing windows updates, updating GPU drivers from Nvidia, clearing media cache DB, launching Premiere while holding shift. Nothing makes a difference.
    System is an 2 CPU Intel Xeon E5-2687W 3.1 GHz, 64GB RAM running Win7 Pro 64.
    Anyone have any suggestions that don't involve reinstalling CS6?

    ...BE AWARE.....the newest versions of PPro CC 2014 contain a "fix" for your problems with the .MOV  32 bit codec. Somehow, .MOVs are NOW handled in a 64 bit environment by PPro which REMOVES the CRIPPLING use of the 32 bit Quirktime process, and ALLOWS much greater memory to be used than the old 4 GB limit.......I've seen the DRASTIC improvement myself on my Haswell laptop. I am not sure about Media Encoder, however, it would be STUPID if the same improvement was not also made with THAT program. CS6 does NOT have this improvement.....and WILL not updated to get it.  If I return to PPro 5.5....the "old" crappy performance returns with Canon MOVs......even on a TWICE as powerful machine !!!!.....UGH !!!
    ....Better to submit to the "subscription model" and its pecadillos that try to edit with a QUIRKTIME hobbled workflow !!!!

  • When will Adobe solve its problems with CS6?

    I am teaching a  class in RAW this quarter and I cannot ask students to purchase CS6 with its current problems unless Adobe can assure me a solution is imminent. As I have no way of contacting Adobe directly, I have to use this forum.
    My present CS6 problem, for over a month, is the Adobe Application Manager requiring me to send my registration number once every day. This only affects Photoshop; I can open Bridge and RAW without any problem. If there is a fix, I haven't heard of it. I have the latest updates, use a Mac, and don't use over 16 bit processing.

    Historically, Adobe has released their full versions about 18 mos. apart. Now, there have been some dot upgrades, that fell within that time frame.
    Usually, there are updates, made available, when complete and tested. Usually, the auto-updater gets the updates first (now, I would assume the Creative Cloud), and then, when an installer package has been released, the separate download/update is posted here.
    Good luck,
    Hunt

  • Premiere Pro CS6 Crashes on Render Timeline and also Export

    Hi, The Last few days Premiere Pro has been crashing during either export of a sequence or during render of timeline.
    This also happens if I import the timeline into AME and try to render from there.
    The Files on the timeline are 720x576 progessive @25fps Avi Type 2's
    I've tried outputting to a number of file types with the same crash. Also I have Premiere Elements on the same machine and this does the same!
    This had been working fine the past few weeks, can't understand why its stopped now.
    I've also tried uninstalling CS6 and reinstalling it. and also keep all updated..
    Also reading some other posts, i also uninstalled Itunes in case the latest update has caused problems. Unfortunately i don't have  restore point from before the problem started happening
    although i do have a backup on another drive.
    I should also mention that i've done a number of virus scans as well with a couple of products just in case of that.
    Machine is Win 7 64 bit.  I7 Quad 2600 (3.4gig), 10gb Ram, Blackmagic extreme input card, and Duo input card. The Video Card is internal to the board (Intel HD Graphics...which performs ok for what i need it for )
    any help would be appreciated to get up and running again.
    cheers
    john

    Well, I think i finally have got to the root of it...These files were recorded using Blackmagics Mjpeg Compressor, and that seems to be the problem.
    Rather than recoding the files (difficult as AME would fall over as well!) I ran them through my digital desk again (Vmix) playing them back and re recording them using AVi and the normal dv option...this time the files produced would render and output...hoorah  now see if i can finish it..will report back, but this seems to have sorted me out.

  • I installed Encore by reverting to Premiere CS6, but after Encore loads and a new project is created, it crashes (exits) before I can do anything.

    I followed the procedure described on the website of uninstalling Premiere CC, installing Premiere CS6, uninstalling it leaving Encore installed and reinstalling Premiere CC. I also installed the menu presets as described on another page of the website.
    Encore loads and I try to create a new project specifying pathname and project name. Before I can do anything further, Encore exits with a windows dialogue about "Due to a problem the program must exit".
    I did notice that some of the text boxes were filled in with values corresponding to old projects so Encore is picking up old configuration information from somewhere.

    Thanks for this. The reason why I uninstalled PR CC was that in trying to follow the procedure in Encore CS6 not installed with Creative Cloud I came to step 5, Locate Premiere Pro in the list and click Install. But with PR CC installed, the button just says "Up To Date". Uninstalling allowed me to proceed.
    Windows 7, and I tried running as administrator with no change.
    Permissions seems unlikely to me, but if Encore can pick up old configuration data, which relates to projects that no longer exist and the pathnames won't be valid seems more likely. Do you know where it is stored so that I could try deleting it? When I last used Encore it was on Vista.
    I would love to do a full Adobe uninstall as I have CS4 and 5.5 versions still hanging around, but errors occur if I try to uninstall them, and even when I tried downloading a special cleaner program from Adobe it didn't succeed.
    Fortunately I have access to Canopus Edius and as a short term solution I have used that to author my DVD, but it would be great to get Encore up and running.

  • Premiere CS6: Neat Video De-noiser effect not exporting?

    I seem to have problems with my neat video de-noiser plugin. When I the effect it's showing in the preview window. But when exported its not there anymore. It worked last week. Please help!

    To import a sequence into AME with PPRO closed, open an OS file browser and go to the path where your pproj is saved. Drag and drop that file into AME (either onto a preset in the Preset Browser or directly into the Queue). You can also select "Add Premiere Pro Sequence" in the File Menu and then browse to your project. Regardless of which path you go down, AME will bring up dialog that shows you all the sequences within the project.
    I expect that importing through one of these workflows will yield the same results as dragging and dropping a sequence from PPRO to AME. All of these methods work directly with the original project file, whereas the normal workflow of exporting from PPRO (File>Export>Media) saves a temporary copy of the sequence at the instance you export.
    Note that in our experience, all of these export workflows add the job to AME in a matter of a few seconds, so we did see a need for a progress dialog. Clearly in your case something is significantly bogging down the process. Perhaps project size or complexity, effects & color grading, some I/O bottleneck.... The fact that drag-and-drop is, what, five times faster makes me suspect that an I/O problem (something like a badly fragmented disc where the snapshot of the sequence is being saved) is at least part of the equation, but that doesn't explain why drag-and-drop still takes over a minute.
    Can you check RAM and CPU usage before and during export to see if either resource is getting pegged?
    Also, what drives do you have your project on and are you encoding to? Are you using a solid state drive? An external drive? Working across a network? Do you have antivirus software running?
    Another possible culprit is conforming audio. I'm not sure what the best way is to check if that's happening other than watching your media cache folder to see if new files are being written.

  • When will Apple support a sync feature for itunes and iphone?

    Anyone know when Apple will support a sync feature for iTunes 11.1.1 and iOS 7.0.2? Its been a few weeks since iOS 7 was released and I still can't sync between my phone and computer.
    I'm curious if the lack of communication means they aren't interested in bringing this function back.

    Not sure what the sync problem is, but see Restore podcasts deleted by iTunes 11.1... for some advice on that issue.
    tt2

  • Adobe Flash Player 10 Fix for WinXP and Vista, IE7, IE8, Firefox, ect.(New Fast Fix)

    (This is a possible solution for most users) I have found that inside the folder C:\WINDOWS\system32\Macromed\Flash (WinXP Home/Pro) (Computer > C: Drive > Windows > System32 > Macromed > Flash for Vista) there should be a file named FlashUtil10b.exe (IF NOT YOU SHOULD UPDATE AS SPECIFIED!) (or FlashUtil10a.exe or for older versions something similar depending on your version), which is the update utility for flash player. Click on this and if it updates, you will have to restart your computer. This should fix any missing files, and update you to the latest version.
    On a side note to all those who read this, I downloaded and installed 5 different times, the same version, from different websites, all for the "new" flash version, and they didn't work (this also included trying to update Shockwave player itself). Apparently, going directly to the website and downloading a new version of Adobe Flash Player, and installing, doesn't uninstall the older version, (though it says it does nor does the uninstaller work directly from the website) nor fixes the problem. I assume they are aware of this problem, because they included this bug fix in revision 10b. This fix should work for those of you whom cannot view/see flash images as well. There also appears to be a bug/reference problem with the installation of IE8 giving the error "Missing Shockwave Decompression XTRA", when trying to play a Shockwave/Flash file, which seems also to affect Firefox and other browsers. It doesn't recognize that the folder or files that it needs in it, exist. I never had his problem before, until IE8 was installed. I checked which version I had in the system32 folder and found this updater built in to Adobe. Version 10a does NOT automatically update, but version 10b includes this fix. I currently had version 10a when I received this error, and began digging for a solution. Doing the update as described above fixed the problem, and updated it to version 10b.
    The new flash version 10b has some new features, such as volume control, auto-updating, and several rendering options for those who may have a faster or slower computer/video card.
    I found this works great for XP users but unsure of the Vista users. The process is the same  for Vista and the update should still work the same, as long as you run it as Administrator, I assume. I have this also posted on wwwdslreports.com at http://www.dslreports.com/forum/r22115254-IE-IE8-and-Adobe-Flash-Question and here http://www.dslreports.com/forum/r22361930-Adobe-Flash-Player-10-Fix-for-WinXP-IE 8-Firefox-ect. It appears to work for everyone so far. I have not heard of any problems from users with this problem running the RC (Release Canidate) for Windows 7 yet.
    I hope this works to your benefit.
    Please leave a reply to help Adobe and other users know if this fix worked for you or not. If not, please explain what you did, and the effects your seeing, including operating system, site of the flash file trying to view, browser type (ex. IE6, IE7, IE8, Firefox, Opera, ect.), and I will try to help you as best I can.
    (I would strongly recommend those not using IE8, or Firefox 3.5, get the updated versions)
    If your looking for uninstallers go to this site: http://kb2.adobe.com/cps/141/tn_14157.html
    If your looking for a true full install, you can download this developer version for Windows and Mac: http://download.macromedia.com/pub/flashplayer/updaters/10/flash_player_update2_flash10.zi p (44MB) (If you download this, I would recommend you still follow my instructions for the Flash Utility before restarting your computer.)

    I would recommend all users having problems try the above solution first.
    I have posted this on a couple of websites, and so far it has fixed everyones problems.
    Firefox 3.5 Beta 4 has Adobe Flash Player coding built into the browser so that it not only loads faster but works better.
    You still need to have the Adobe ActiveX plug-in and Adobe Flash Player for both browsers.
    I would also recommend you download Shockwave Player 11.
    IE8 has tried this as well, but it still has a couple bugs in it.
    If you have IE8 or FireFox 3.5 Beta 4, and you are still having problems, then I recommend that you go to www.windowsupdate.com and get all of the latest updates (including SP3), then try this fix again.
    Your auto-updater built into windows (If you even have it on) doesn't always pull down every update available for your computer. It only pulls down the manditory ones.
    Sometimes you HAVE to go to the website and manually get them yourself. I recommend when you go to the website, you click on custom install and pick every last one of them to install, which includes, hardware and software fixes for your computer.
    What a lot of people don't know is that when you have installed and tried all of the recommended fixes that Adobe gives you, and it still doesn't work, is that you are having registry conflicts within your Operating System (OS ex. WinXP, Vista, Linux, ect.), and that it is not the Adobe software at all.
    Those are usually repaired by making sure your computer stays up to date.
    The fact is the computer world is changing so rapidly that everyone can't keep up. You have to check for updates weekly.
    If you fall behind on those updates, then you start having problems with your computer and/or software.
    One problem then can turn into many and people get frustrated when something all the sudden just quits working.
    Take a day or two at least once a month, and make sure you update and maintain your computer.
    This includes disk defragmenting, disk cleanup, and making sure you have all the lastest updates.
    You can get to Disk Defrag, and Disk Cleanup by going to Start, All Programs, Accessories, then to System Tools.
    I would do Disk Cleanup first, then Defrag.
    I hope you take this advise into consideration, and that it is very helpful for you.
    If you find this useful, please come back and reply to this forum, and let everyone know so that others will be encouraged to do this.
    Thanks and goodluck, from another user like you.

Maybe you are looking for