Will be renting a condo with an ethernet cord. Can I plug this into Airport Express and have wifi?

I will be renting a condo with an ethernet cord available. Can I simply plug this into my Airport express and have wifi for computers, iphone, and printer?

As long as the Ethernet cord leads to a router connected to the Internet, then yes, it will do all that.
What you want to do is the reason a lot of people bring an Airport Express with them on trips. They plug it into the hotel room Ethernet port and bam, their laptops and phones have wireless Internet.
If you don't already have a password on your Airport Express, now would be a good time to add one, especially if Internet usage is metered. Just to keep others from getting onto your network.

Similar Messages

ITunes will only play one song at a time, I can't select an album or artist and have it keep playing the next song.

I just can't figure out how to keep itunes going. It plays one song at a time and will not go on to the next. Do I need to change a setting or something?

At a guess you've somehow managed to uncheck the entire library. Select the Songs view, the CTRL+click an empty checkbox. All boxes should become checked. If you don't see the checkboxes use Edit > Preferences to enable them.
tt2

When opening a 6x4 landscape orientation raw (.dng) file in Photoshop CS5, it will automatically crop to a 4x6 orientation. How can I change this? I did not have this problem before now.

I need to know how to correct this so it doesn't automatically change the orientation.

That's new to me. I usually use the standalone dng converter to convert any raws to dng. Then I can open in Photoshop. Since I have never had this problem, the best I can do is to get you close to a fix if I don't have an exact answer. There is also a Camera Raw forum that can better advise you.
Adobe Camera Raw Also since you mention Lightroom, see if they know anything. Photoshop Lightroom
Since I'm most experienced in Photoshop, I can only hand out stock troubleshooting that would just miss the problem. Photoshop CS5 does host ACR. Is this happening when you open the dng in ACR from Lightroom, and not after you open the dng from ACR into Photoshop?
Finally when a dialog box isn't working correctly. It's the Alt key on your keyboard that would change the Cancel button into Reset in ACR. It might not work if you are using a Bluetooth keyboard. (My screen capture keys won't let me show the Reset button)
So try that and if it fails, check out the other forums. If no one else joins this thread, I should tell you I"m out of ideas, can't seem to locate an answer, and I don't want to hold you up.
Gene

How do I know "Roaming Network" is working with Airport Express and Airport Extreme and should I use extended wireless network for third Express?

Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
http://support.apple.com/kb/HT4145
The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
Questions:
1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
2. How can I tell which of the Airports the attached client device is using?
The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
http://support.apple.com/kb/HT4259
Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
Mitch

1. How does the client device know which Airport to connect to?
The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
2. How can I tell which of the Airports the attached client device is using?
On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

Is Printer HP Laserjet 1018 compatible with Airport Express and windows

I am using HP Laserjet 1018 which is connected directly to the PC.
As it is a USB printer but not a wifi one, can I connect it to Airport Express and will it be recognised ?
Thank you for your answers.

Hello TigerParis75,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
AirPort Utility 6.x: Use a USB printer on your Wi-Fi network
http://support.apple.com/kb/PH5114
Just make sure you have all the updated version of the drivers.
Best of luck,
Mario

Frequently I will be asked to sign in to my Apple account, but it is using an email I don't use with Apple. How can I get this to stop?

I use an iPod4 Touch and am using IOS 6.1.6. Frequently I will be asked to sign in to my Apple account, but it is using an email I don't use with Apple. How can I get this to stop? This is happening repeatedly throughout the day. I don't have an Apple password for this email address, nor do I want one!

Maybe an App that needs updating was purchased by that account?
Could someone have installed an app not purchased with your account?
Can you post a screen shot of the message?

I have an iPod Nano with just the USB charger. Is it safe to plug this into a Kindle power adaptor to charge from the mains or will I need to buy the Apple one?

I have an iPod Nano with just the USB charger. Is it safe to plug this into my Kindle power adaptor to charge from the mains or will I need to buy the Apple one?

Hi,
Try resetting your iPod: http://support.apple.com/kb/HT1430.
If that doesn't work, try restoring it: http://support.apple.com/kb/ht1414.
If all else fails, you will have to place your iPod in Recovery Mode: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird---

HT1515 I'm getting poor performance from my apple TV, will plugging in my airport express via ethernet to apple tv increase its performance (poor wi-fi signal)

I'm getting poor performance from my apple TV, will plugging in my airport express via ethernet to apple tv increase its performance (poor wi-fi signal)

Yes, though it is less ideal than what I suggested earlier. You would need to place your AirPort Express in a location approximately midway between your AirPort Extreme Base Station and the TV. Then, using AirPort Utility, configure it to "extend a wireless network".
It may help. Bear in mind the signal thus "extended" by the Express can only be as good as the signal it can receive from the Extreme. That is the reason for selecting its appoximate midway location.
Read about it here: http://support.apple.com/kb/HT4145
Scroll down to "Wirelessly Extended Network (802.11n)" for a picture.
This solution requires an all-Apple wireless network. No third party stuff.
You mentioned using Ethernet. That would be a better idea. Scroll down to "Roaming Network (Ethernet-connected Wi-Fi base stations)" for a picture. In your case, the longer the Ethernet cable - hence the closer you can move the Express to the TV - the better

I just updated to ios7 and my phone wants me to connect to iTunes before I can do anything. My computer is broken and I'm borrowing someone else's. Will it try to sync with their computer? Can I get around using iTunes somehow?

I just updated my iPhone 4S to iOS7 and it wants me to connect to iTunes before I can do anything. But my computer is broken and I'm borrowing someone else's. Will it try to sync with their computer? Can I get around using iTunes somehow? I'm new to this; any help would be appreciated!

If the device is indicating to connect to iTunes, then it is in recovery mode. You will need the computer and iTunes to recover it. You can fix the iTunes to not sync to your device, but just let it recover the phone. I hope you would have a backup of your data in iCloud, since it is no longer available to you on the phone.

WDS with Airport express and Dual ethernet Airport base

Can the airport express and dual ethernet airport base create a wds? I can't find the options on the airport base's software.

coloradoapple, Welcome to the discussion area!
The Dual Ethernet (snow) AirPort base station (ABS) does not support WDS.
Only the AirPort Extreme base station (AEBS) and AirPort Express (AX) support WDS.

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IMac (on Ethernet) Can No Longer Stream to Airport Express (on WiFi)

After years of reliable service, all of a sudden I cannot stream music from iTunes on my iMac, via my Airport Express, to my stereo system.
First, a bit about my configuration:
   * iMac connected via Ethernet to a wireless router (D-Link DIR-655).
   * iMac Airport (WiFi) is turned off.
   * D-Link sets up a wireless network, and Airport Express joins the network.
   * Airport Express does not set up its own network, it's simply a client of the existing D-Link wireless network.
   * iTunes "sees" the Airport Express, and can stream audio via AirPlay.
   * iPad also joins the wireless network, and also can stream to the Airport Express via AirPlay.
   * iMac running 10.6.8, with all software updates applied.
   * Airport Express running latest firmware (7.6.1).
Well, that was a few days ago, when "it just worked". But for some unknown reason iTunes could no longer "see" the Airport Express.
So I took my Airport Express to the Apple Store and they did a Factory Reset, but it did not solve the problem. I figured my rather old Airport Express was failing, so today I bought a new one. The symptoms have changed a bit, but even after spending an hour on the phone with AppleCare, it doesn't work properly.
Now, the only way the iMac can stream to the Airport Express is if the iMac also joins the wireless network. In fact, now with Airport turned OFF on the iMac, the Airport Utility cannot see the Airport Express. But here's another weird thing: when I use the IP address of the Airport Express, the Airport Utility CAN connect with and manage the Airport Express, even with Airport turned OFF on the iMac!
I should also mention, the iPad has no issues whatsoever connecting to the D-Link's wireless network and streaming music to the Airport Express.
This all seems like something might have changed on the D-Link wireless router. But for the life of me, I cannot figure out what setting(s) on the router might allow the iMac - over Ethernet - to stream audio to the Airport Express.
Another thing. When I have Airport turned on on the iMac, it can "see" and stream to the Airport Express, but the music has very frequent drop-outs. Could this be related to the fact that the iMac has two IP addresses (one on Ethernet, one on WiFi)?
My goal is to get things "back to normal", where I can turn off Airport on the iMac, and all LAN and WAN traffic from the iMac goes over Ethernet. I have a few questions (for now :-)
   * Since my iMac has two connections to my LAN using two IP addresses (Ethernet & WiFi), is that likely to cause any issues?
   * When two computers join the same wireless LAN, can they effectively talk directly to one another, or does the wireless router need to be involved every time one computer sends a TCP or UDP packet to the other?
   * Do routers (or the DIR-655 in particular) tend to have any firewalls or policies that control connections on the LAN between Ethernet and WiFi clients?
   * Since AirPlay uses TCP port 3689 and UDP port 5353, would the DIR-655 need any special configuration to "open these ports" so an Ethernet client can connect with a WiFi client?
So, any help would be most appreciated!
Thanks!
Jim

I am having a very similar issue. I use my Airport Express (AX) to stream music from the computers on my network to my stereo via Airplay. I have AX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem. I can succesfully connect all of my wireless devices via Airplay, through iTunes to my AX, including two laptops and an iPhone. However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my AX. Similar to your case, I can see the Airport Express from my PC through my Airport Utility by directly typing in the IP address. Note that the AX set-up option to allow Ethernet clients is checked. I also noticed that my laptops will stop detecting AX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards. They will resume detecting AX when I turn their wireless connections back on. I have tried every conceivable setting of my D-Link router to no avail.

How to extend wireless with airport express and time capsule

So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
TWO ADDITIONAL Qs:
Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away .... HELP!
thanks so much (when did apple phone support start to be closed on Sundays?)
cheers.

Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
Open AirPort Utility, select the Time Capsule and click Manual Setup
Click the Wireless tab below the row of icons
Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
Click Update to save your settings and close AirPort Utility
Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
Click the Wireless tab
Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check mark entered next to "Allow wireless clients"
Wireless Security = Same setting as the Time Capsule
Wireless Password = Same password as the Time Capsule network
Confirm Password
Update to save settings and close AirPort Utility
Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
Post back on your results.

Extend wireless network with multiple airport express and netgear powerline

I currently have the following network configuration:
1. Using ATT u-verse (2-wire 3800HGV-B "modem") to internet
2. Disabled the u-verse modem wireless router, and have connected an Apple Time Capsule wireless router (on a DMZ)
3. Have four Netgear XAVB5001 powerline adapters connected to the time capsule (for our iMac desktops and the Apple TV)
4. Have an Airport Express wirelessly connected to the time capsule to extend range (for our iPhones and iPad)
All this is currently working. What I would like to do is the following, keeping 1-3 above the same:
4. Connect the airport express to the time capsule via Netgear XAVB5101 powerline adapter (instead of wirelessly connecting to the time capsule as it is today) and use it to extend the wireless range of the time capsule
5. Add ANOTHER airport express to the time capsule via powerline adapter (and extend the wireless range elsewhere in the house).
Does anyone have any experience with this kind of setup and can assure that it would work? (I'm trying to decide whether to spring for a couple more powerline adapters and another airport express)
Thanks in advance!
Dave

I had a VERY similar problem: I was trying to extend my wireless network using a hardwired ethernet connection from Airport Extreme to my Time Capsule. Every time I plugged in the wire to the TC, everything disappeared. Unplugged, and boom. Came back.
Here's how I solved it:
Go into Airport Utility and select the unit you are trying to use as a wireless extender and choose to edit it. Then, on the wireless tab select CREATE a wireless network. But, give it the exact same name and password. This is completely counter-intuitive. You would think to choose EXTEND, but this would be wrong. Next choose the network tab. And, select Router mode to Bridge (off).
By choosing the same name and password, your phone, laptop, etc. will think it's on the same network and move seamlessly from one to the other.
See if this fixes your issue. Fixed mine instantly. AND, it only took 3 painstaking hours of checking ethernet connections and rewiring jacks, etc. to figure it out. LOL

Extending network with Airport Express and Airport Extreme (latest models) causes chaos on network

Today I upgraded from my several year old Airport Extreme (3rd gen) and 2nd gen Airport Express to a new (what you'd buy on the shelf today) Airport Extreme and Airport Express. All airports are updated with the latest firmware and I'm using windows 7 for configuration.
The intention is to use the Airport Extreme as the main router, also serving wifi. And extend the network using the express. As such, the following has been done:
The Airport Extreme is configured for automatic channel, and automatic radio mode. I tried to select 802.11n 5 ghz and 802.11 n 2.4 ghz only, but it won't take the changes. Additionally, it wont' accept me using only channel 6. Not sure why, but I digress. The airport extreme is not set to broadcast a separate name for the 5ghz network.
The Airport Express is configured to use bridge mode, use an existing wireless network and is connected to my network on it's WAN port (the circle icon on the back) with ethernet. The password and wireless name used in configuration is the same as created initially on the Airport Extreme.
Initially I did the configuration of both airports on my computer, connected by ethernet to ensure stable connectivity while I inputted settings. During this, they appeared to accept the changes fine. However, when I moved the airport express to it's destination (other side of my house), the entire network went crazy.
Internet became slow, and often wouldn't load pages. This was on wired and wireless connections. When I attempted to administer the Airport in the Utility, they would not load, an error would occur. Also, at one point the Airport Extreme had renamed it self with a (2) at the end. Which was super odd. So far, the only solution has been to unplug the Airport Express and attempt to devise a solution.
Anyone have any ideas? Of course, I will continue to tinker with this, but it seems realllly strange. The previous setup was also extended (granted, using wireless only, not ethernet > wireless) and worked fine, granted it was a smidge slow, but it worked.

I wanted to add this.. I followed the guide here: http://support.apple.com/kb/HT4260 to extend using ethernet, and the above is the result.
I just tried re configuring in OS X Mavericks and got the same, odd, result.

Will be renting a condo with an ethernet cord. Can I plug this into Airport Express and have wifi?

Similar Messages

Maybe you are looking for