Will DB start automatically after rebooting the computer?

user9947478 wrote:
Will DB start automatically after rebooting the computer?Yes. IF you set it up to do so. Or you have an OSs for which it is installed to automatically do so and you have not disabled it.
I assume, since it seems to be difficult for you to tell us what operating system you use, that you use some form of Windows. In which case, the answer is 'Yes, automatically set up - as seen by the Services'.
(Windows users don't seem to realize there are other OSs and therefore don't tell. They also don't realize that Windows is not an OS, but rather the marketing label for a whole families of OS Editions. Some popular families are: Windows XP, WIndows 2003, Windows 2008, Windows 7. But even then, Oracle only works on specific Editions within the family.)

Similar Messages

IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

Oracle does not start automaticly after reboot

I've installed O 9i on win2ksrv after installing DB2.
Then I create a database and this db starts successfully.
After reboot the database is shutdown and can only starts manually by sysdba.

Hi,
Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full". If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
Regards
Bhavik G. Shroff

Problem in starting services after rebooting the sap server.

Hi ,
I got a problem in starting SAP services files in SAP BI system on windows 2003 server. Whenever I reboot the system all sap services failed to start throw a message u201CCould not start SAPBDJ_00 service on local computer. Error 1069: The service did not start due to login failure".
This is the common message for every sap service SAP<SID>_00,SAPOSCOLL,SAPCMSr.01,SAPSMD_98. Until unless I maintain ./SAPservice<SID> password externally by going through service.msc and g to properties of particular service and g to logon option to maintain password manually to fix this.
./SAPService<SID> user is no locked and password maintained properly also I tried to change the service user to SIDADM user and restarted the server however getting the same problem.
Could not find any fixes in internet so please help me to fix this issue.
Regards,
Vinod

Hi Sunil,
we are in midde of BI implementation. last week we built the DEv box and Updated kernel and suport packs and restarted then i observerved this issue. I have already tried to change the SIDADm user but intially after changing the user service will start and once you restart the server then the issues appear again.
The password which i am using was the one set during the installation.
Please suggest.
Regards,
Vinod

Tried to upgrade from firefox 3.6.2 to 3.6.3, error message says another instance of firefox is running, then 3.6.2 opens. This occurs when i start firefox after restarting the computer, or when i try to install the upgrade

Whenever i try to open firefox, i get a message that firefox cannot install the upgrade because another instance of firefox is running. Then firefox 3.6.2 will start. running windows 7 64 bit. This will occur every time i try to open firefox, after rebooting or any time i close it and reopen firefox.
== This happened ==
Every time Firefox opened
== I Ok'd the upgrade from 3.6.2 to 3.6.3

Do a clean (re)install and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

IPhoto 6 starts automatically after reboot, how to avoid ?

Every time I reboot my Imac, Iphoto starts automatically.
It is not active in Accounts / Login Items
Also no camera is attached to the computer; The settings for ImageCapture are to launch EOS Utility if a camera would be attached.
Any clues ?
Thanks,

Xinram
Right click on the iPhoto icon in the Dock, see if 'Open at Log in' is checked.
Do you have a FAT format disk or USB flash drive connected to the Mac?
Regards
TD

Ovs-agent starts automatically after reboot but hostname isnt resolvable

Hello Guys,
the theme is the problem. After rebooting a server the ovs-agent starts automatically but the DNS-Name of the SR isnt resolvable.
If I restart the agent by hand everything works fine. I checked the /etc/init.d, where its installed and the rc3.d. ovs-agent got S99 - which means, it starts last.
But which service is responsible for DNS? In my eyes the only thing that must be up, is networking, isnt it?
Do you have any hints for me?
Greetz

Please check your /etc/hosts and make sure that the hostname is on a separate line and not mapped to 127.0.0.1

Need Database to be started automatically after restarting the system

I m using oracle 8.1.6 on windows 2000. My company wants me to automate the database i.e whenever the system is restarted then the database should also start automatically.
Do any one have any solution for this?....

Action :
Begin by logging on as Administrator. This will give you access to all the Services available in Windows 2000. To load the Services Utility, click on Start, Settings, Control Panel, Administrative Tools, then Services (You may also be able to access it via Start, Programs, Administrative Tools, Services if you enabled Administrative Tools to be displayed on the Start Menu).
Then double click on OracleService<sid> and change the startup type to Auto.
Mudassir

What might my problem be if my display will not come on after waking the computer from sleep or powering it on?

When I try to wake the MBP from sleep (opening the lid, pressing spacebar, or pressing power button), the computer display doesn't come on. The light on the front shows it is awake but there is no display or backlight though the caps lock lights up. I have tried an SMC and PRAM reset to no avail. I tried to start up in safe mode but now as soon as the screen comes up to select the user the display goes out and I don't know how to get it to stop trying to boot up in safe mode. Any suggestions as to what the problem might be and some possible solutions?

2.53 GHz Core 2 Duo
4GB
13 inch Mid 2009

Firefox 5 hangs after new install at Checking the Add Ons and will not start even after reboot

Downloaded V5, ran the install, started Firefox and first screen is 'Checking Add Ons', the status bar is shown and immediately hangs. Have tried to restart, have rebooted and start and Firefox will not come up. Have to drop back to V3.6

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
This can be a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.

CUE 8.0(1) unable to start automatically after reboot CME

Hi
I have an issue with CUE (ISM) 8.0.1
When the router has been reboot it then the CUE module its not restarted Automatically
I have to login on cue module via cli and write the command BOOT DISK in order to start the CUE module
ServicesEngine boot-loader> boot disk
Loading disk:/bzImage ... Verifying ... done.
Starting Kernel.
Pls Advice
thanks

Hi Paolo
could you pls give me a dogumentation or something for the boot loader?
i didnt find anything
thank you

IDVD will not start up and freezes the computer

Please help...last night I created a project using idvd and everything was fine. today when i started up the application won't even open. the entire computer freezes up. I've already run disk utility repair. any suggestions?
thanks

Hi Ryan:
Try Zap PRAM, Repair Permissions, & run FSCK
Look here for "how-to"
http://forums.macrumors.com/showthread.php?t=89736
And of course-Welcome to the discussions!
Sue

Lightroom 3 will not start, even after deleting the .LOCK file.

I have read about deleting the .lock file and that did not work. I have restarted my computer and that did not work. I tried opening a backup catalog and that did not work. I delete the .lock .journal and the catalog and the resorted from the back up. It created a new cataloge but it still did not work.
Any Ideas?
All my software is updated. and was working before.
MAC OS 10.6.8
LR3 3.6
Thanks All.

Thanks for the help. However it did not work.
I held the Option key and was able to create a catalog. I should explain LR3 tries to start. Then I get a message that LR3 unexpectedly quit. I am trying one more thing. I only had 15GBs of space on the HD. I am clearing more space to see if that works. I had updated the OS too.
OS is Lion 10.7.3
and LR3 3.6
Thanks again for trying. If you think of anything else let me know.

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

Will DB start automatically after rebooting the computer?

Similar Messages

Maybe you are looking for