Will external speakers on both 3.5 mm and a USB port work at the same time?

Have two sets of speakers that I want the same audio on. If I connect one set of speakers to 3.5 mm audio out, and the other set to a USB port, will I hear audio coming out of both sets?
If that's possible, do you know if I can regulate volume independently on both sets through Mac Mini?
Thanks in advance to any replies.

Thanks. So I guess my other option (if not getting into third party apps) is to split optical out or get a multi-zone receiver.
Thanks for the reply!

Similar Messages

  • Can I extend both a 2.4Ghz and a 5Ghz wireless network at the same time with a second Timecapsule / Extreme ?

    Can I extend both a 2.4Ghz and a 5Ghz wireless network coming from a Timecapsule  with a second Timecapsule / Extreme at the same time?

    I am currently extending my 5Ghz network via an Express without any problems, but the Express can only extend either / or. I just want full coverage for both networks in the whole house.
    If you can extend 5 GHz now with an AirPort Express and get satisfactory results, then the AirPort Extreme will work to extend both the 2.4 GHz and 5 GHz bands in the same location.
    However, your computer is going to connect to the band with the strongest signal, so it may....or may not....connect to 5 GHz given a choice of two signals.

  • Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time.  She wants I.O.S. 8 removed.  How do I remove it from both devices?  I am willing to resort to my old IOS7.1.2.

    Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time.  She wants I.O.S. 8 removed.  How do I remove it from both devices?  I am willing to resort to my old IOS7.1.2.

    Sorry...downgrading is not supported.

  • TS2634 My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What

    My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What can I do next since it doesn't give me even one clue as to what the error would be?

    Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted :  a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone.  I deleted that event, then went through the calendar resync one by one, and all seems OK now.
    In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them.  It would be nice to have a similar way to work with Calendar!
    Thanks for pointing me to the right article.

  • Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track.

    Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track. i don't know if anyone has the same problem, but i haven't sync my ipod touch 4 gen to my i-tune playlist for the longest time, cus i was afraid to transfer the problem to it since i have a pc (win 7) but not MAC.

    i am sorry, guys, but  I really really really need you guys' help. if u know ANYTHING...

  • HT1752 Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi Kylie,
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • How do I get my speakers and Fatal1ty HS-1000 USB to run at the same time?

    I am having trouble running both my speakers and Fatal1ty HS-1000 USB headset at the same time. Sometimes I like to take off my Fatal1ty HS-1000 USB headset and listen to my music really loud with my 5.1 system, but now I would have to unplug the Fatal1ty HS-1000 USB headset from the back.
    So when I play WoW I have to plug my Fatal1ty HS-1000 USB headset back in and go back and forth when I want to listen to music loud and play WoW.
    I installed the the drivers with the audio panel.

    Chocobo87 wrote:
    I am having trouble running both my speakers and Fatal1ty HS-1000 USB headset at the same time. Sometimes I like to take off my Fatal1ty HS-1000 USB headset and listen to my music really loud with my 5.1 system, but now I would have to unplug the Fatal1ty HS-1000 USB headset from the back.
    So when I play WoW I have to plug my Fatal1ty HS-1000 USB headset back in and go back and forth when I want to listen to music loud and play WoW.
    I installed the the drivers with the audio panel.
    It seems like you want output of audio on both the speaker and headset. I too have problem of always unpluggin and switching. Does anyone know if both can work. Can audio output be both in speakers and headset?

  • Can I use both ePrint and AirPrint on an HP4630 at the same time

    I have an HP4630 printer that I wish to use with an iPad and Mac Notebook (PowerPC running OS X 10.5.8) and want to know if I can run AirPrint for iPad and ePrint for Mac Notebook at the sametime.
    I understand that Mac Notebook can not connect to the printer over the network because it is not capable of running OS X 10.6 and above.
    I appreciate your help.
    This question was solved.
    View Solution.

    Hello Chesher5,
    Welcome to the HP Support Forums!
    Regarding the inquiry into ePrint and AirPrint for the Officejet 4630, yes they can be both used at the same time. They are completely separate means of printing. Both require a network connection though.
    If you have any problems setting up or using either, please let me know and I'll do my best to assist.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Can you play the guitar program and also run a keyboard at the same time using seperate outputs for both?

    I wanted to be able to play live on my electric guitar using mainstage and my keyboard player to use mainstage on the keyboard can this be done using the mainstage 2 on this computer?  Also if this can be done can you send the keyboard output and the guitar output seperatly to be able to be in different channels in the PA system?

    Hi
    Spatrick79 wrote:
    I wanted to be able to play live on my electric guitar using mainstage and my keyboard player to use mainstage on the keyboard can this be done using the mainstage 2 on this computer?
    Short answer: YES (but you will need to carefully consider how you organise your Patches with Guitar and Keys combinations, so that you both get the correct sounds at the same time)
    Spatrick79 wrote:
    Also if this can be done can you send the keyboard output and the guitar output seperatly to be able to be in different channels in the PA system?
    Yes, ideally using a multi-output audio interface. edit (with 2 outs for the guitar, and 2 for keys... you might also want another 2 pairs for monitoring)
    CCT

  • Will mac pro and monitors ordered together ship at the same time?

    Will Mac Pro and Thunderbolt monitors, if ordered together, ship at the same time? Or will they ship the in-stock monitors now initiating the Applecare start date for the whole order even though the Mac Pro is not expected to ship until sometime in March?

    I ordered the new Mac Pro (model 6.1) on December 18, 2013 along with a 27 in. Apple thunderbolt display.  The fully maxxed out new Mac pro shipped on January 8, 2014 and arrived January 13, 2014.  My Thunderbolt display shipped within 1-2 days of placing the order, i.e. the week of December 18th and arrived before Christmas.  A few days after receivng my new Mac Pro, I received the Apple Care paperwork and both the new Mac Pro and the Apple Thunderbolt display were listed with a start date of January 7, 2014, i.e. the day that my new Mac {ro was prepared for shipment -- not the day my thunderbolt display was shipped.
    Tom

  • Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

    Hi Gurus:
    Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
    Please let me know as this impacts a lot of my development....! Thanks....
    Best...... ShruMaa
    PS:  I had posted this in "BI Extractors" forum but there has been no response......  Hope to get some response.......!  Thanks

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • My iphone will not set up as a new iphone and it constantly goes back to the same screen when hit set up as new iphone how to fix this?

    I just updated to 6.1.3 not knowing that i would ahve to completley reset my iphone because i did this while jailbroken, wanted to get rid of it anway but not when i try to set up my idevice as a new iphone via itunes it doesnt do anything i click on it and it takes me to my music and does nothing i click on the iphone thing and it takes me back o the same screen asking do i want restore or set up as new ihpone i have tried both and they do the same thing which is nothing. i even tried to reset it again by putting it in dfu mode nothing is working.... If anyone could please help ive had this iphone for awhile now its a 4s got it in feburary ive never had any problems like this Any solutions please.......

    But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

  • Can\'t get both rom drives to work at the same time

    HI I  just finished building my new system with the MSI 6585 and everything works well EXCEPT my two roms drives.  I can get one to work or the other to work but not both at the same time.  I have the hard drive on the primary IDE and both rom drives on the secondary IDE.  I tried setting one up as master and one as slave.  I tried them the opposite way around.  I tried setting them both on cable select.  If I try to boot with both of them hooked up the computer refuses to boot past post .  Can anyone give me any suggestions please?  
    I am running XP pro with 512 megs of ddr ram .
    The cd burner is a liteon 40X12Xthe 48.  To be honest I cannot remember what brand the DVD player/cd player is ..
    Thank you
    Linda  :D

     :D Thank you thank you thank.. you .. just got back from the computer store.. LOVE that place.. with a brand spanking new round cable and voila .. both roms working..
    I had tried several cables I had here at home.. but I guess they are all hooped..  :(
     YEHAAAAAA..

  • Can an Ironport work in both WCCPv2 and L4 Traffic monitoring modes at the same time?

    Hello Ciscoers,
    We have an ironport installed and we use WCCPv2 to redirect the traffic. And as it occurs, I have a need to forward the traffic for another network, that uses another path to the Internet.
    So I was thinking using the L4 Traffic Monitoring.
    To the best of your knowledge, is there a way to have the appliance use both WCCPv2 and L4 Traffic monitoring at the same time? From the configuration, it's one or the other.
    Thanks,
    J.

    Ok. I'll try.
    As a matter of fact, I plan to use policy-based routing to forward all the "interesting" traffic to the appliance.
    For your TCP-Resets not seen, do you allow ingress on the span session?
    J.

  • Multiple speakers won't work at the same time

    I have the remote speakers button at the bottom of the iTunes window, and can select My Computer and the Stereo individually, but only the Stereo will play when I try to play both at once.
    Windows XP Pro, SP2
    No firewall on the computer, just the router connected to the Internet
    Any ideas?
    Thanks,
    Jim

    I've developed a similar problem with this. I used to use multiple speakers with my AX fine when connected to my digital stereo input using an optical cable. Now I've moved things round and plugged my computer direct into this stereo, using the AX with another analogue one in a different room. It worked to start with, then got flaky and now doesn't work at all. Again, works fine when using just the AX, but not with multiple speakers. I'm wondering if this is a reception thing, except that on its own the AX streams flawlessly. Firewall on or off makes no difference. And also the red light of the optical input comes on when it's on multiple speakers. I wonder whether this is still defaulting to just sending the optical signal somehow. Wondering about resetting the firmware on the AX.
    Will let you know if I get any progress.
    Ben

Maybe you are looking for

  • How to create a variant to a report from another program at run time

    Hi experts,                when i am using FM  :  /OSP/REPORT_CREATE_VARIANT to create a report variant from a program then i am getting  an error 'For object /OSP/ERPNR , number range interval 01 does not exist ', how should i avoid it or can any on

  • Expire all local cache entries at specific time of day

    Hi, We have a need for expiring all local cache entries at specific time(s) of the day (all days, like a crontab). Is it possible thru Coherence config ? Thanx,

  • Persistence problems

    Hello. I have made myself a web app using Java Server Faces which I am running on Glass Fish V2. The problem that I am having is that while the program complies and runs without throwing any exceptions. My entities are not beeing saved to the databas

  • How to create icon on the taskbar

    please give me some codes for this problem. I dont know how to write in C++. Thanks

  • Escalation date and time

    Hi experts, I am pretty new to workflows. I just need one information. If I open the tcode SWI1, and give the workitem ID, I go to another screen, where there is a CONTAINER tab, that lists the details of the workitem. There are 2 fields ESCALATION D