Will final cut Pro 7.0 work with ATI Raedon X1600

Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

If you want to check other applications for compatability:
http://roaringapps.com/apps:table

Similar Messages

Final Cut Pro does not work with Yosemite. Can it be fixed?

Final Cut Pro does not work with Yosemite. Can it be fixed?

Hi Tom, I don't know if you can help me.
I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
HELP.
Jada.

How can I get my Final Cut Pro 7 to Work with 10.8 Lion?

I get these two messages and then Final Cut Pro shuts down. Please don't tell me to use FCProX because I don't have time to learn a new system and need to edit a project today. Anyone who has real info on this please help! Thank you SO MUCH! xoxo

Use Disk Utility to repair the permissions on your system disk.
Download Preference Manager (free) from Digital Rebellion
http://www.digitalrebellion.com/prefman/
to trash your FCP preferences.
MtD

Final Cut Pro 5 not working with JVC BR-HD50/HD-100U

The footage was shot in 720/30p on the HD-100U which is supposed to work with FCP5. I am using the HD50 deck. I can log the footage but only see black going to the Log & Capture window. I have checked all the settings on the deck and in FCP with no luck. I did get it to capture 853x480 footage that was uncontrollable. FCP does not recognize it on the timeline but does in the viewer. Any suggestions?

welcome to the forum!
You'll get good advice here and it's worth a visit even if you don't have a problem - you'll learn a lot from reading the posts.
This is a good workaround for curing your camera recognition problem:
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time but note that if you have QT Pro, you’ll have to re-purchase it.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
G5 Quad 8GB. 250+500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Will Final Cut Pro X work with Yosemite

Will Final Cut Pro X work with Yosemite?

me too version 10.8. It would have been nice to know yosemite was going to crap out my primary video editing software! I use this for my video editing for my business video production and it would have been nice to know ahead of time or here's a crazy idea how about the software developers who are making millions off final cut pro sales release a fix BEFORE apple roles out yosemite for free. I don't have time to chase down every blog in the world to see issues etc. The reason I bought a mac is I just need it to work so I can work on my business.

Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

I'm with Jon on this one. I know someone who uses FCP 5.0 on a MacBook Pro, he has all sorts of wierd issues including:
Projects he has created throwing up an error message "Unreadable on this machine" when re-opened.
Projects losing and refusing to connect to render files.
Dissolves simply not working -this is not to do with lack of handles, it just happens.
LiveType and FCP's own title generator files not automatically compositing.
Lots of kernel panics and unexpected quits.
These might not happen all the time, but always crop up at the worst possible moment.
I can move his project files and media to my setup and everything works.

If I update to Snow Leopard, will final cut pro still work?

If I update to Snow Leopard, will final cut pro still work? My current version of Final Cut Pro is 6.0.6. Thanks.

Apple is not telling you the Complete story about Lion.
The installer for FCP 6 is Power PC code/ IBM CPU code, which Lion does not support.
FCP 6 is NOT Power PC code, it will run on Lion and Mountain Lion, as I have read on many posts.
The solution??
Solution condition where FCP 6 installed and upgrading OS to Lion
Do nothing, its already running OK
Solution condition where FCP 6 not installed and OS Lion installed.
Connect a firewire drive to your MAC and install the old OS on it (eg snow leopard) ,
Reboot to that OS
Install FCP 6
Reboot to your new OS (EG Lion)
Run FCP 6

Will Final Cut Pro X recognize Avid Mojo interfacing with Broadcast Pix? If so, how do I accomplish this?

Our church used an HP for 12 years that was refurbished and finally died. We captured Sunday services for broadcast using Avid Express connected to a Broadcast Pix Switcher via an Avid Mojo with a firewire cable. This week, I replaced it the HP with a Mac in hopes of using Final Cut Pro to capture and edit video for broadcast. Will Final Cut Pro X recognize Avid Mojo interfacing with Broadcast Pix? If so, how do I accomplish this? Currently I have the mojo connected to the Mac via a firewire adapter through the thunderbolt port. However, the Mac isn't seeing the mojo or the cameras connected to the switcher.

Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding?

Will final cut pro X speed up if i upgrade my ram and don't upgrade my processor? iMac 2.9 GHz i5 with 8 GB ram

will final cut pro X speed up if i upgrade my ram and don't upgrade my processor? iMac 2.9 GHz i5 with 8 GB ram

the most improving effect on 'speed' is distributed media:
System/App, Projects, Events, Cache, backups on diff. platters. Esp. when using compounds/multicams, each 'angle' on its own drive...
To improve 'rendering' = export speed, the graphic card is the limiting factor.
On my slow system, 8GB was nice, 16GBs made it more 'snappier' ...

How can I get a version of Final Cut Pro X that works on OS Mountain Lion?

I just downgraded my laptop to its original OS (Lion) and will be upgrading soon to Mountain Lion because this laptop is too old to work with Mavericks or Yosemeti. So far Final Cut Pro X, Motion and Compressor (which I had originally purchased when I first bought the computer) do not work. Will Final Cut Pro X work on Mountain Lion? If not, what can I do to get a version that will work?
Thanks!

10.0.9 is the latest version compatible with Mountain Lion. I found this article which may help you:
http://thefcpxeditor.tumblr.com/post/70885235923/what-i-can-run-fcp-x-10-1-and-1 0-0-9-on-the-same
At the time it was written it was apparently possible to download from the app store with a computer running ML. Maybe this is still the case.
FCP 10.1. has video requirements which are not met by older machines. I'm not sue about 10.0.9 but that might possibly be a 'gotcha'
I'm a bit confused though since if you downgraded you laptop to Lion but Mountain Lion is the latest OS it will run then you must have been running ML already
Geoff.

Will final cut x 10.1 work on a new mac mini?

Does anyone know if the newst verssion of final cut will work on the newest mac mini?

Welcome to Apple Support Communities
Of course. Final Cut Pro X is compatible with the Late 2012 Mac mini and you can download it from the Mac App Store. See > http://www.apple.com/finalcutpro/specs/

Final Cut Pro 5 quit working. Please help!

I have Final Cut Pro 5, which worked two weeks ago when I opened it. Last Monday (4/27) I ran a system update. Yesterday when I tried to open FCP5 the startup screen popped up like usual then disappeared (along with the black triangle under the icon in the Dock) and the program ceased to launch. It hasn't opened since. I tried reinstalling the program and got the same results.
Is it possible that I installed something in that system update that is causing a conflict and not allowing FCP5 to open???
Here's what I installed on 4/27/07:
LiveType Update 2.0.2
Pro Application Support 3.1
Pro Applications Update 2005-01 1.0
Cinema Tools Update 3.0.3
Motion 2.0.1 Update 2.0.1
Final Cut Pro Update 5.0.4
Security Update 2007-004 1.0
Compressor Update 2.0.1
Apple Qmaster Update 2.0.1
Pro Applications Update 2005-02 1.0
Soundtrack Pro update 1.0.3
THANKS in advance for any insight/problem solving!!
L

Welcome to the forums.
When FCP stops working like it should, that typically points to corrupt preferences. Trash them and FCP will make new ones. This typically solves the issue.
Download and run FCP Rescue. It trashes all three preference files for FCP. Simply click TRASH...then launch FCP again.
Shane

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

This is quite an open suggestion, but here are some ideas which might get you started. There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary. I have only worked with Sony XDCAM which seems pretty good to me. File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter. The Sony XDCAM EX3 can produce results well up to broadcast quality.
As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card. Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7. It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor. But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to).
This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
Hope this helps a bit.
Jonathan

How do I transfer my Final Cut Pro X Trial work to my paid full version?

How do I transfer my Final Cut Pro X Trial work to my paid full version?
I can't seem to find a way to do this.

Kriscass wrote:
I am having issues with this, too. I currently have both the trial version and the purchased version, and I've done a lot of work in the trial that I MUST get access to, but it's not showing up in the paid version (contrary to what is stated above... that it shows up in the paid automatically). I am worried that if I delete the trial all my days of work will be trashed. It is critical that these files transfer...is it truly as simple as deleting the trial? Why was that not said anywhere in the loading directions? Feeling truly frustrated!
What version is the trial? Is that a 10.0.*?
What version is the purchased version?

Ok. can any one tell me: will Final Cut Pro 6 fcs2 bundle) install on my GeForce 6600 LE Video Card on my G5 powerpc dual core 2.0? Thanks Much to anyone who can give me a definitive answer. also if not any fix aka .plist?

ok. can any one tell me: will Final Cut Pro 6 (fcs2 bundle) install on my GeForce 6600 LE Video Card on my G5 powerpc dual core 2.0? Thanks Much to anyone who can give me a definitive answer. also if not any fix aka .plist?

Look at this technical specs document, your system should be fine with the possible exception of Color.
As for managing your preference files, use Digital Rebellion's tool.
Good luck.
Russ

Will final cut Pro 7.0 work with ATI Raedon X1600

Similar Messages

Maybe you are looking for