Will Motion 5 work with FCP 7?

Since I am not interested in downgrading to iMovie Pro, will the new Motion work ( templates, etc. showing up) with FCP 7?

Check out the Motion 5 section here: https://discussions.apple.com/community/professional_applications/motion_5
Alan

Similar Messages

2.8GHz Quad-Core Intel core i7 WILL IT WORK WITH FCP?

I am planning on purchasing the new IMAC 2.8GHz Quad-Core Intel core i7 27" screen for work with FCP. The requirements to install FCP state in relevent part:
ATI or NVIDIA graphics processor (integrated Intel Graphics processors not supported).
Does this mean that the 2.8GHz Quad-Core Intel core i7 27" screen will NOT OPERATE FCP. I know that the Quad-Core Intel i7 is an upgrade for the system should I stay with the basic NVIDIA graphics processor?

I understand there is a difference between the "graphics cards" and the Processor and Memory?
Graphics Cards:
27-inch model with dual-core processor, one of the following:
ATI Radeon HD 4670 graphics processor with 256MB of GDDR3 memory
ATI Radeon HD 4850 graphics processor with 512MB of GDDR3 memory
27-inch model with quad-core processor:
ATI Radeon HD 4850 graphics processor with 512MB of GDDR3 memory
I am going to purchase the quad-core processor which will come with the ATI Radeon HD 4850 processor with 512MB of GDDR3 memory
The Processor and memory according to Apple Specs are as follows:
27-inch models only, one of the following:
2.66GHz quad-core Intel Core i5 processor with 8MB shared L3 cache; Turbo Boost dynamic performance up to 3.2GHz
2.8GHz quad-core Intel Core i7 processor with 8MB shared L3 cache; Turbo Boost dynamic performance up to 3.46GHz; Hyper-Threading for up to eight virtual cores
I would like to purchase the 2.8GHz quad-core Intel core i7 processor
This is where my concern is when FCP says (integrated Intel graphics processors not supported)!

Will iMovies work with Motion 5?

I am getting more and more into film, abandoned buildings are getting crazier the more I go through them. I want to share my videos on YouTube but I would like to have an introduction on the videos, will iMovies work with Motion 5?

Hi Appleman756,
I'm not sure how integrated you want them to be, but you can export your Motion project to use as the intro for your iMovie.
Motion 5: Share to iMovie, GarageBand, and other Apple applications
Share a Motion project to iMovie
Choose Share > Export Movie (or press Command-E).
Choose an export format from the Export pop-up menu.
This menu provides a list of codecs.
Choose None from the “Open with” pop-up menu.
Choose an option from the Include pop-up menu.
If you’ve set In and Out points in the Timeline, use the Duration pop-up menu to choose whether to export the entire sequence or the portion between the In and Out points.
Click Next.
Enter a name and location for the exported file, then click Save.
Motion renders and saves your movie, which can now be imported into an iMovie project using the File menu. For more information, see iMovie Help.
Best,
Nubz

Motion 5 with FCP 7?

Hi
If I buy MOTION 5 will it work with my FCP 7.0.3? Can I import MOTION 4 projects into 5 as well?

Right you are…broken. Here it is again.
Russ

Where can I buy? Will it work with Final Cut Express?

Is it possible to purchase just Motion? And I read everywhere that motion works with final cut pro, will it work with express also?
Thanks

http://www.digitalrebellion.com/blog/posts/doesapplication_x_work_with_applicationy.html

Focusrite Saffire interface not working with FCP 4?

I can't seem to get my focusrite saffire audio interface to work properly with FCP? It works fine with all other apps (itunes, QT, Logic etc) and all the other Studio apps (Motion, DVD Pro and Soundtrack Pro) - but in Final Cut the sound is 'distorted' and 'jumpy'? All focusrite and FCP software is upto date.
Has anybody else had this sort of problem? Is anybody happily using the saffire with fcp? (I can't seem to find any on the search!)
it seems strange that it wont work with fcp but work with the other apps of the package? I can't see any sort of settings in fcp to solve this issue? Any help?!

I am actually only using it to play back audio 'syncd' with picture straight off camera or importing clips from quicktime/DVD's etc. in FCP - it is this that I can't hear correctly? (all the clips are fine by the way played in other aps etc)
Yes, editing is done in Soundtrack Pro or Logic Pro (used to have pro-tools mbox - but decided to ditch it and go down the Logic route with another interface!) - but I expect to be able to hear basic audio with picture in FCP?
Sample rates are matched?...

How do HD-SDI work with FCP?

Hi,
Do anyone mind to explain that how do HD-SDI work with FCP?

Hi
You'll need an HD-SDI I/O card, such as a Blackmagic Decklink or Aja Kona, which has those connectors. The software they include will allow FCP to use the SDI ports for capture or monitoring, and add sequence presets for different video formats.
Check the product pages at Aja or Blackmagic for more information, and these forums for various opinions on either card. I've been using a Kona LHe for 23.98 capture from an HDCAM deck, and monitoring the same sequence to a Sony CRT at 29.97. Works very well.
Matt

Configure Macbook Pro with one hard drive to work with FCP

I would like to do some video editing while on the road. I have a new Macbook Pro with Final Cut installed. I know that the capture scratch should not be on the same hard drive as the application. How do I set up the computer to work with FCP when I have only one hard drive. I do have external hard drives to use when editing at home but I would like to edit while traveling in the car or on a plane.

If you don't have an external drive attached, FCP will default to the system drive. The CAPTURE SCRATCH folder will be located in the DOCUMENTS>FCP DOCUMENTS folder. You CAN edit on the system drive, but performance might suffer and you might get dropped frames. DV, OFFLINE RT are fine, HDV and other formats might give you headaches. I have edited DV and OFFLINE RT HD on my laptop's hard drive on a plane without much problem.
Get a bus powered hard drive like the G-Raid Mini. This way you only need one power source.
Shane

HT1338 I am working with FCP

I am working with FCP Version 7 in Mac OS X Version 10.6.8 On Wednesday evening all my project was saved and everything was ok but on Thursday morning I opened the same project but in canvas it appears green. MPEG-2 Video, Linear PCM, Timecode was my video format that I have been editing, whereas the different format aside "MPEG-2 Video, Linear PCM, Timecode" works in FCP. Please help me.

Yea, it sounds like the backlight is going, or the inverter. If you let it sit in BIOS for awhile will it happen there too?
________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7.

My wife and I have separate Ids but all our music is in one library. How will this work with iCloud?

My wife and I have separate Ids but all our music is in one library. How will this work with iCloud? i'm trying to download past purchases from her id, but itunes is saying that I can't because the computer is associated with my apple id. Can I associate the computer with both ids for the purpose of identifying all of our music with both or just one of our ids? Is there a good way to do this? I'm sure we're not the only people with this problem...
Using 2 iphone 3gs, ipad, mac mini, appletv, itunes for windows, macbook, and imac.

iTunes- How to share music between different user accounts on a single computer
You cannot merge two separate libraries across user accounts. Photos does not have the function of merging different Photos.library files. If you have Aperture then you can merge the two before migrating over to Photos.

How do i stop firefox from trying to go to version 7? if will nto work with some of my SW thus i do not want it. better to uninstall firefox?

it keeps popping up to tell me to update. yet when i check what it works with and known issues, it will not work with some of the things i use. thus how do i stop firefox from this regual reminder?

Tools\Options\Advanced..._ and in the "advanced" windows go ot "Update" tab,
UNCHECK the "Update Application\browser/firefox"
http://i56.tinypic.com/o5q2b5.jpg

When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

Will Motion 5 work with FCP 7?

Similar Messages

Maybe you are looking for