Will Nortel's Contivity VPN Client work with Cisco's VPN 3000 concentrator?

Hi, need help. We have VPN 3000 concentrator and a number of VPN clients (these are using Cisco VPN client).
We have one user that wants to use Nortel's Contivity VPN Client. Will this work with the Cisco COncentrator 3000?

Tricky question - in theory yes, if the nortel client follows all the ISPEC RFC's.
I did try to get the cisco VPN client working on a Nortel Contivity once - did not get it working - but did'nt have that much time to test and get it working.
My advise - Configure, TEST DEBUG TEST DEBUG!

Similar Messages

  • VPN Site-to-Site or VPN Client Server with Cisco IP Phone 8941 and 8945

    Hi everyone,
    I decide to deploy a CUCM (BE6K platform), SX20, and IP Phone 8941/8945 on Head Office and Cisco SX10 and IP Phone 8941/8945 for branch offices (actually 9 branch offices).
    The connection will use internet connection for HO and each branch offices.
    And the IT guy want to use kind a VPN client server or VPN site-to-site for the connection through internet,
    what kind of VPN client server or VPN site-to-site that recommended for this deployment?
    and what type of Cisco router that support that kind of VPN (the cheapest one will be great)?
    So the SX10 and IP Phone 8941/8945 in branch offices can work properly through internet connection?
    please advise
    Regards,
    Ovindo

    Hi Leo,
    technically, the ipsec users will not use up any premium license seats, so if you have 10 ipsec users connecting first, the premium seats are still free and so you can then still have 10 phones/anyconnect users connect.
    However, the 250 you mention is the global platform limit, so it refers to the sum of premium and non-premium connections. Or in other words, you can have 240 ipsec users and 10 phones,  but not 250 ipsec users and 10 phones.
    If 250 ipsec users and 10 phones would try to connect, it would be first-in, first-served, e.g. you could have 248 ipsec users and 2 phones connected.
    Note: since you have Essentials disabled I'm assuming you are referring to the legacy "Cisco vpnclient" (IKEv1 client) which does not require any license on the ASA. But for the benefit of others reading this thread: if  you do have Anyconnect clients (using SSL or IPsec/IKEv2) for which you currently have an Essentials license, then note that the Essentials and Premium license cannot co-exist. So for e.g. 240 Anyconnect users and no phones, you can use Essentials. For 240 Anyconnect users and 10 phones, you need a 250-seat Premium license (and a vpn phone license).
    hth
    Herbert

  • VPN client connect to CISCO 887 VPN Server bat they stop at router!!

    Hi
    my scenario is as follows
    SERVER1 on lan (192.168.5.2/24)
    |
    |
    CISCO-887 (192.168.5.4) with VPN server
    |
    |
    INTERNET
    |
    |
    VPN Cisco client on xp machine
    My connection have public ip address assegned by ISP, after ppp login.
    I've just configured (with Cisco Configuration Professional) the ADSL connection and VPN Server (Easy VPN).
    All the PC on LAN surf internet and remote PC connect to VPN Cisco server via cisco VPN client.
    But all remote PC after connection to Cisco VPN server don't ping SERVER1 in lan and therefore don't see SERVER1 and every other resource in LAN.
    They can ping only router!!!
    They are configured with Cisco VPN client (V5.0.007) with "Enabled Trasparent Tunnelling" and "IPSec over UDP NAT/PAT".
    What is wrong in my attached configuration? (I've alspo tried to bind Virtual-Template1 both to unnambered Dialer0 and to Loopback0 but without luck)
    Peraps ACL problem?
    Building configuration...
    Current configuration : 5019 bytes
    ! Last configuration change at 05:20:37 UTC Tue Apr 24 2012 by adm
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname gate
    boot-start-marker
    boot-end-marker
    no logging buffered
    aaa new-model
    aaa authentication login default local
    aaa authentication login ciscocp_vpn_xauth_ml_1 local
    aaa authentication login ciscocp_vpn_xauth_ml_2 local
    aaa authorization exec default local
    aaa authorization network ciscocp_vpn_group_ml_1 local
    aaa authorization network ciscocp_vpn_group_ml_2 local
    aaa session-id common
    memory-size iomem 10
    crypto pki token default removal timeout 0
    crypto pki trustpoint TP-self-signed-453216506
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-453216506
    revocation-check none
    rsakeypair TP-self-signed-453216506
    crypto pki certificate chain TP-self-signed-453216506
    certificate self-signed 01
            quit
    ip name-server 212.216.112.222
    ip cef
    no ipv6 cef
    password encryption aes
    license udi pid CISCO887VA-K9 sn ********
    username adm privilege 15 secret 5 *****************
    username user1 secret 5 ******************
    controller VDSL 0
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp client configuration group EXTERNALS
    key 6 *********\*******
    dns 192.168.5.2
    wins 192.168.5.2
    domain domain.local
    pool SDM_POOL_1
    save-password
    crypto isakmp profile ciscocp-ike-profile-1
       match identity group EXTERNALS
       client authentication list ciscocp_vpn_xauth_ml_2
       isakmp authorization list ciscocp_vpn_group_ml_2
       client configuration address respond
       virtual-template 1
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
    crypto ipsec profile CiscoCP_Profile1
    set transform-set ESP-3DES-SHA1
    set isakmp-profile ciscocp-ike-profile-1
    interface Loopback0
    ip address 10.10.10.10 255.255.255.0
    interface Ethernet0
    no ip address
    shutdown
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    interface ATM0.1 point-to-point
    pvc 8/35
      encapsulation aal5snap
      protocol ppp dialer
      dialer pool-member 1
    interface FastEthernet0
    no ip address
    interface FastEthernet1
    no ip address
    interface FastEthernet2
    no ip address
    interface FastEthernet3
    no ip address
    interface Virtual-Template1 type tunnel
    ip unnumbered Dialer0
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile CiscoCP_Profile1
    interface Vlan1
    ip address 192.168.5.4 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip nat inside
    ip virtual-reassembly in
    interface Dialer0
    ip address negotiated
    ip nat outside
    ip virtual-reassembly in
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication chap pap callin
    ppp chap hostname ******@*******.****
    ppp chap password 0 alicenewag
    ppp pap sent-username ******@*******.**** password 0 *********
    ip local pool SDM_POOL_1 192.168.5.20 192.168.5.50
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 600 life 86400 requests 10000
    ip nat inside source list 1 interface Dialer0 overload
    ip route 0.0.0.0 0.0.0.0 Dialer0
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark CCP_ACL Category=2
    access-list 1 permit 192.168.5.0 0.0.0.255
    access-list 100 remark CCP_ACL Category=4
    access-list 100 permit ip 192.168.5.0 0.0.0.255 any
    dialer-list 1 protocol ip permit
    line con 0
    line aux 0
    line vty 0 4
    transport input all
    end

    Hello,
    Your pool of VPN addresses is overlapping with the interface vlan1.
    Since proxy-arp is disabled on that interface, it will never work
    2 solutions
    1- Pool uses a different network than 192.168.5
    2- Enable ip proxy-arp on interface vlan1
    Cheers,
    Olivier

  • VPN client connect to CISCO 887 VPN Server but I can't ping Local LAN

    Hi
    my scenario is as follows
    SERVER1 on lan (192.168.1.4)
    |
    |
    CISCO-887 (192.168.1.254)
    |
    |
    INTERNET
    |
    |
    VPN Cisco client on windows 7 machine
    My connection have public ip address assegned by ISP, after ppp login.
    I've just configured (with Cisco Configuration Professional) the ADSL connection and VPN Server (Easy VPN).
    All the PC on LAN surf internet and remote PC connect to VPN Cisco server via cisco VPN client.
    But all remote PC after connection to Cisco VPN server don't ping SERVER1 in lan and therefore don't see SERVER1 and every other resource in LAN. I can't even ping the gateway 192.168.1.254
    I'm using Cisco VPN client (V5.0.07) with "IPSec over UDP NAT/PAT".
    What is wrong in my attached configuration? (I've alspo tried to bind Virtual-Template1 both to unnambered Dialer0 and to Loopback0 but without luck)
    Perhaps ACL problem?
    Building configuration...
    Current configuration : 4921 bytes
    ! Last configuration change at 14:33:06 UTC Sun Jan 26 2014 by NetasTest
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname TestLab
    boot-start-marker
    boot-end-marker
    enable secret 4 5ioUNqNjoCPaFZIVNAyYuHFA2e9v8Ivuc7a7UlyQ3Zw
    aaa new-model
    aaa authentication login default local
    aaa authentication login ciscocp_vpn_xauth_ml_1 local
    aaa authentication login ciscocp_vpn_xauth_ml_2 local
    aaa authorization exec default local
    aaa authorization network ciscocp_vpn_group_ml_1 local
    aaa authorization network ciscocp_vpn_group_ml_2 local
    aaa session-id common
    memory-size iomem 10
    crypto pki trustpoint TP-self-signed-3013130599
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-3013130599
    revocation-check none
    rsakeypair TP-self-signed-3013130599
    crypto pki certificate chain TP-self-signed-3013130599
    certificate self-signed 01
    3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
    31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
    69666963 6174652D 33303133 31333035 3939301E 170D3134 30313236 31333333
    35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
    4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30313331
    33303539 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
    8100A873 940DE7B9 112D7C1E CEF53553 ED09B479 24721449 DBD6F559 1B9702B7
    9087E94B 50CBB29F 6FE9C3EC A244357F 287E932F 4AB30518 08C2EAC1 1DF0C521
    8D0931F7 6E7F7511 7A66FBF1 A355BB2A 26DAD318 5A5A7B0D A261EE22 1FB70FD1
    C20F1073 BF055A86 D621F905 E96BD966 A4E87C95 8222F1EE C3627B9A B5963DCE
    AE7F0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
    551D2304 18301680 14E37481 4AAFF252 197AC35C A6C1E8E1 E9DF5B35 27301D06
    03551D0E 04160414 E374814A AFF25219 7AC35CA6 C1E8E1E9 DF5B3527 300D0609
    2A864886 F70D0101 05050003 81810082 FEE61317 43C08637 F840D6F8 E8FA11D5
    AA5E49D4 BA720ECB 534D1D6B 1A912547 59FED1B1 2B68296C A28F1CD7 FB697048
    B7BF52B8 08827BC6 20B7EA59 E029D785 2E9E11DB 8EAF8FB4 D821C7F5 1AB39B0D
    B599ECC1 F38B733A 5E46FFA8 F0920CD8 DBD0984F 2A05B7A0 478A1FC5 952B0DCC
    CBB28E7A E91A090D 53DAD1A0 3F66A3
    quit
    no ip domain lookup
    ip cef
    no ipv6 cef
    license udi pid CISCO887VA-K9 sn ***********
    username ******* secret 4 5ioUNqNjoCPaFZIVNAyYuHFA2e9v8Ivuc7a7UlyQ3Zw
    username ******* secret 4 Qf/16YMe96arcCpYI46YRa.3.7HcUGTBeJB3ZyRxMtE
    controller VDSL 0
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp client configuration group EXTERNALS
    key NetasTest
    dns 8.8.4.4
    pool VPN-Pool
    acl 120
    crypto isakmp profile ciscocp-ike-profile-1
    match identity group EXTERNALS
    client authentication list ciscocp_vpn_xauth_ml_2
    isakmp authorization list ciscocp_vpn_group_ml_2
    client configuration address respond
    virtual-template 1
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
    mode tunnel
    crypto ipsec profile CiscoCP_Profile1
    set transform-set ESP-3DES-SHA1
    set isakmp-profile ciscocp-ike-profile-1
    interface Ethernet0
    no ip address
    shutdown
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    hold-queue 224 in
    pvc 8/35
    pppoe-client dial-pool-number 1
    interface FastEthernet0
    no ip address
    interface FastEthernet1
    no ip address
    interface FastEthernet2
    no ip address
    interface FastEthernet3
    no ip address
    interface Virtual-Template1 type tunnel
    ip address 192.168.2.1 255.255.255.0
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile CiscoCP_Profile1
    interface Vlan1
    ip address 192.168.1.254 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    ip tcp adjust-mss 1452
    interface Dialer0
    ip address negotiated
    ip mtu 1452
    ip nat outside
    ip virtual-reassembly in
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication chap pap callin
    ppp chap hostname ****
    ppp chap password 0 *********
    ppp pap sent-username ****** password 0 *******
    no cdp enable
    ip local pool VPN-Pool 192.168.2.210 192.168.2.215
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 600 life 86400 requests 10000
    ip nat inside source list 100 interface Dialer0 overload
    ip route 0.0.0.0 0.0.0.0 Dialer0
    access-list 100 remark
    access-list 100 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
    access-list 100 remark
    access-list 100 permit ip 192.168.1.0 0.0.0.255 any
    access-list 120 remark
    access-list 120 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
    line con 0
    exec-timeout 5 30
    password ******
    no modem enable
    line aux 0
    line vty 0 4
    password ******
    transport input all
    end
    Best Regards,

    I've updated ios to c870-advipservicesk9-mz.124-24.T8.bin  and tried to ping from rv320 to 871 and vice versa. Ping stil not working.
    router#sh crypto session detail 
    Crypto session current status
    Code: C - IKE Configuration mode, D - Dead Peer Detection     
    K - Keepalives, N - NAT-traversal, T - cTCP encapsulation     
    X - IKE Extended Authentication, F - IKE Fragmentation
    Interface: Dialer0
    Uptime: 00:40:37
    Session status: UP-ACTIVE     
    Peer: 93.190.178.205 port 500 fvrf: (none) ivrf: (none)
          Phase1_id: 192.168.1.100
          Desc: (none)
      IKE SA: local 93.190.177.103/500 remote 93.190.178.205/500 Active 
              Capabilities:(none) connid:2001 lifetime:07:19:22
      IPSEC FLOW: permit ip 10.1.1.0/255.255.255.0 10.1.2.0/255.255.255.0 
            Active SAs: 4, origin: dynamic crypto map
            Inbound:  #pkts dec'ed 0 drop 30 life (KB/Sec) 4500544/1162
            Outbound: #pkts enc'ed 5 drop 0 life (KB/Sec) 4500549/1162

  • WLS :: Will Vista web client work with Weblogic Server 8.1.6 over SSL?

    Hello,
    I have installed 51-2 bit SSL cert on weblogic 7 and found that the secure site doesn't work on Vista web client.
    Weblogic gives error in handshaking and says algorithm is not supported.
    Vista web client uses some algorithms which were not supported by weblogic 7.
    So would like to know if would Vista web client work with Weblogic Server 8.1.6 over SSL?
    Any information in this regard would be helpful.
    Thanks in Advance.

    can you use the following debug flags in the weblogic server as java_options and paste the complete ssl handshake exception here.
    -Dweblogic.StdoutDebugEnabled=true
    -Dssl.debug=true
    thanks,
    sandeep

  • Can 9i client work with 8i & 7 database?

    Not sure if this is the correct forum, but here's my question.
    I have a 8i database which I access using a ODP.NET (VB.NET program). I also need access to an Oracle 7 database from the same application.
    1) will 9i client work with 7 database?
    2) if not, if I install 8i & 9i Client, can I programmatically pick which one I use (not using the oracle home selection program)?
    I could create materialized view of the oracle 7 tables on the 8i database, but seems like alot of duplicated storage. If I can't get this to work I would have to resort to the Microsoft ODP for Oracle since I can use 8i client with it.
    Thanks!
    Bob

    Wouldn't changing the system PATH variable in code alter it for every web application running? If I have multiple applications running changing the PATH to suite the current call could inadvertently affect another application. The only other solution is to run MS data provider or ODP.NET/9i on one Web server, and 8i on another.
    Bob

  • Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

    We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
    So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
    I found a similar query from March 2014 found here 
    http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281 
    Has there been an update released to resolve this
    Cheers D

    Hi  ,
    According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
    For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Will a CP1518ni color laser printer work with airprint with my iPad?

    will a CP1518ni color laser printer work with airprint with my iPad?

    Hi Ijergen,
    Yes you can use AirPrint as long as the printer is on the same network as the iPad.
    You can also try Google cloud, I will be giving you links below on how to go about it.
    AirPrint
    http://www.apple.com/support/ipad/assistant/airprint/
    Cloud print
    http://androidadvices.com/how-to-print-from-androi?d-phone-with-google-cloud-print/
    http://www.google.com/support/cloudprint/
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Will Adobe Acrobat 8.0 Standard Work With Adobe Reader 8.2.4?

    Hello,
    I have a question, but haven't found an answer to this yet.
    Can anyone tell me please:  Will Adobe Acrobat 8.0 Standard work with Adobe Reader 8.2.4?
    I had Adobe Acrobat 6.0 Standard on my computer & it was working with Adobe Reader 8, but don't remember what the version it was.
    I was using Adobe Acrobat 6.0 Standard to scan very old family pictures & documents & I realize that this version of Acrobat is outdated.
    To make a long story short, my computer had crashed, so we built another computer & just replaced the hard drive.  When I went to Adobe, I had to download the newer version of Reader 9.0 & it didn't work with Acrobat 6.0., so I removed Adobe Reader 9 & I found Adobe Reader 8.0 & have downloaded the patches, so now I have Adobe Reader 8.2.4 back on board.
    Thank you.

    Adobe doesn't recommend any version of Reader with any version of Acrobat on Windows. It will cause problems. It just is a matter of how and when. The problem has to do with shared resources causing conflicts. If you have Acrobat 8, you can update it to Acrobat 8.2.4. You must apply the updates sequentially.
    http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

  • Will my LED 27 Cinema Display work with the new Mac Pro?

    Will my LED 27 Cinema Display work with the new Mac Pro?

    Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

  • Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter?

    Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter? I like to have two monitors and currently using an Cinema Display from 2005. Thanks

    If your computer does not have Thunderbolt you cannot use a Thunderbolt display.  There are no adapters that will help.

  • Will a Mac cinema display monitor work with an Acer hard drive

    Will a Mac cinema display monitor work with an Acer hard drive?

    Hello,
    Which exact Cinema Display & which Acer HDD?

  • Will my airport extreme 2nd generation work with docsis 3.0 cable modems?

    Will my airport extreme 2nd Gen work with docsis 3.0 cable modems?

    RRoger, everything is working fine.
    So, what is the actual problem here?  You are now wondering if the Vonage can handle the speed from the modem? Is that the "problem" after all this discussion?
    now I am wondering if my current setup will allow me to get docsis 3.0 speeds.
    What speed is your Internet provider delivering to you?
    The AirPort Express uses 100 Mbps Ethernet ports, so it will handle up to 100 Mbps. We have already told you that.
    Vonage likely does the same. The answer is almost certainly "yes" .......both the Vonage and AirPort will handle the speed from the modem.
    If you want to double check this, please provide the model number of the Vonage,  and we will try to look up the specifications for the device. If you have documentation there with specifications for the Vonage device, check to see if the Ethernet ports are listed as 10/100. This is standard with almost all devices, with some of them handling even higher speeds 10/100/1000.
    Chances are, your network will handle a lot more speed than your service provider is supplying to you. So, the "choke" point on your network may very well be your service provider and modem......not the Vonage and AirPort.

  • Will an 11-inch MacBook Air work with Snow Leopard?

    Will an 11-inch MacBook Air work with Snow Leopard? If yes, can you downgrade from Yosemite to Snow Leopard?

    1. For actually booting Snow Leopard, it depends on the model; click here and see what the mimimum OS for yours is.
    2. All of them can run Mac OS X 10.6 Server inside a product such as VirtualBox or Parallels Desktop.
    (125764)

Maybe you are looking for