Will Pages work with MacBook Pro OS Snow Leopard 10.6.8?

I am wondering if the Pages App will work with MacBook Pro OS Snow Leopard 10.6.8.  I am getting conflicting information from people, and I don't want to purchase and download the App if I am not able to use it.  Thanks for your help.

Thanks so much for your help, Michael. Glad to hear it works for you.  This gives me enough confidence to go ahead and order the App.  Thanks again. 

Similar Messages

  • Need Help...my wireless airport express will not work with my update of snow leopard

    after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

    If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

  • Can't print on HP4M with Macbook Pro using Snow Leopard

    Hello Everyone,
    I've tried everything I know...which isn't much...to avoid having to request your help knowing that many people have had similar problems. However, I still can't get my Mac to print with the HP4M printer regardless of what I have tried. I'm using AsanteTalk (Appletalk to Ethernet) to connect to my computer. It worked great with my old iMac but those days are gone. I'm currently using OSX 10.6.6. I did try a parallel to usb cable but that didn't do it either.
    Thanks in advance for your help!
    Jim

    I recently downloaded HPPrinterDrivers 2-1.6.dmg. It's my understanding that this file is the most current one and is dated 3/24/11. For your info, when I'm using usbtb with the parallel cable, I do get a note saying it sees a usb printer when the HP 4m is connected. Unfortunately, it doesn't contain an HP 4M driver. When I'm using Print Setup withoutt usbtb, however, there are all kinds of Laserjet drivers that can be selected but the old printer always goes into "Pause".
    I tried the parallel cable with my wife's Macbook running Tiger this morning and still didn't see the printer. I guess I could try my iMac with the parallel cable and do know that it does work with AsanteTalk. I'm afraid it's about over for the old warhorse but I'll check into resetting the printing system first.
    Thanks, again, Greg for all of your help and time!

  • Syncing iphone 4s with macbook pro w/snow leopard 0sx

    I am able to sync event from my laptop to my phone, but events created on my phone are not showing up in ical. So frustrating!! Any ideas?
    Thank you.

    OK, I figured out the problem with contacts and calendars.
    Does anyone have any ideas on why my bluetooth won't connect? Or why the Remote won't work between my iphone and my macbook?
    Thanks for any suggestions

  • Will Adobe CS6 work with MacBook Pro 4.1 on 10.6.8?

    I know Adobe CS6 will work with 10.6.8 Snow Leopard, which I just upgraded to, but will it run on my Macbook Pro 4.1 (late 2008)? I'm currently on CS4....Thx

    Thanks so much. A long time Mac addict (1984), I'm still not interested in some of the system profile gobbledygook like Open GLs and stuff. Happy New Year....
    Bret

  • Trying to upgrade a MacBook Pro to snow leopard 10.6.3 and all I get after the upgrade is done is the a blank page with the apple trade mark. I did restart the computer few times and all the same

    Trying to upgrade a MacBook Pro to snow leopard 10.6.3 and all I after the upgrade is done I just get a blank page withe apple symbol. I've rebooted the computer and nothing happens

    Upgrading from which Mac OS X?
    Is this v10.6.3 a retail disc?
    You can purchase Snow Leopard from the Apple online store > Mac OS X 10.6 Snow Leopard - Apple Store

  • I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8?

    I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.

    rayvonr wrote:
    ...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
    1)  Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
    http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
    2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
    DO NOT install Mavericks over Snow Leopard!

  • I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard.  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard?  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
    1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
    2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
    You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
    After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
    3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    Ahmed
    Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
    Pattie

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • I have a new l7 macbook pro running snow leopard.  When I try to boot into windows7 32bit, I get either a blue, black, or flickering screen.  Then I have to physically shut down and try again.  At that point it will load correctly.  Any help?

    I have a new l7 Macbook Pro running snow leopard.  When I tried to to install windows 7 32 bit on bootcamp, I kept getting a flicking black and blue screen when it tried to install. (Tried several times).  I finally downloaded the bootcamp windows support to a flash.  I inserted that and finally got it installed.  Now when I try to boot into windows I get either a solid black (sometimes blue) or flickering screen and windows will not start up.  If I then physically shut down the mac and restart, it will finally boot into windows where it tells me that windows was shut down unexpectently and once I click start windows normally, it will boot up.  That will generally let me boot into windows for the remaining of the day.  The next day, the same thing happens again.  I have tried reinstalling several times, and the same thing keeps happening.  It is not my windows disk because it installs flawlessly on the mid 2008 macbook pro.  Anyone know how to fix this?

    I own HDM 2011. But they have products that aren't listed or hard to find too.
    Recommending Pro version for one user's needs:
    http://www.wilderssecurity.com/showthread.php?t=297756
    Pro vs HDM 2011 feature comparison
    http://www.paragon-software.com/home/hdm-personal/comparison.html
    Forum topics:
    http://www.wilderssecurity.com/showthread.php?t=297756
    http://www.wilderssecurity.com/showthread.php?t=303155

  • MacBook Air Superdrive?? Does it work with MacBook Pro

    Hello,
    I need an external Superdrive. Does the MacBook Air Superdrive work with MacBook Pro??

    No, it does not (at least, not without opening the drive and modifying the internal components).
    External optical drives from Sony and LaCie work well with the MBP. Here's ONE EXAMPLE, here's ANOTHER EXAMPLE, both from Amazon.

  • Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

    Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
    Thanks!

    It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

  • I have a 2011 Macbook Pro 15" Snow Leopard Quadcore icore 7 with 8Gb of RAM and Im a Webpage Graphic Designer but why is my Macbookpro is so slow!?

    I have a 2011 Macbook Pro 15" Snow Leopard Quadcore icore 7 with 8Gb of RAM and Im a Webpage Graphic Designer but why is my Macbookpro is so slow!?
    I'm opening like Skype, AIM, Chrome the Memory Hog, Adobe Photshop and Illustrator...  Its so slow! I tried Onyx, CleanMyMac, iFreeMemory or just purging  but still i still have to restart to get it back to normal after closing all the applications... im not really impressed with the memory swapping thing,Even though my inactive RAM is like 2GB its so SloW! Anyone knows how to fix this problem?

    It's hard to say why your machine is slow, but that machine with 8 GB of RAM should not be slow.  Could be any number of possible problems.  Try taking a look at the Mac OS X Speed FAQ.

Maybe you are looking for