Will the new final cut pro x work with my Final cut pro version 6.0.6 data

will the new final cut pro x work with my Final cut pro version 6.0.6 data

Thanks Tom.
So I will need upgrade to FCP 7 first, then convert to an XML file in 6.0.6, then convert to another file that FCP X can read? I have a lot of half done projects that need finishing. Is this process very complex and time consuming?
Maybe I should be approaching this from a different angle. The reason I am asking is that I now need to upgrade to a new Mac book pro and have been told that I cant run final cut pro 6.0.6 on the new models using maverick. Is this true?
Roger

Similar Messages

Will the New iTunes 11 for Windows work on Windows 98???

Will the New iTunes 11 for Windows work on Windows 98???
A. True.
B. False.

My opinion is no. Apple has no plans updating version 11 to meet the needs of Windows 98 being that #1 - Windows is pushing forward with their Windows 8 operating system launching in a week and iTunes 11 would have needed to be re-written from scratch to accomodate the Windows 7 and Windows 8 systems. It is a known issue that iTunes is bloated and most Windows users will use other media players to manage their music rather than iTunes. #2, Windows 98 is so old that even Windows does not recommend anyone using anything past XP as you are exposing your PC to viruses or anything that no longer can be patched. I highly recommend upgrading to atleast to Windows 7 and this is of course if your PC matches the bare minimum of hardware to use iTunes 10.7 and 11. You are actually doing more harm than good by using an outdated OS.

Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
Here is the data and the response:
Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
ANS returned an error: 8 128 0 0 0 2
Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
ANS did not return a response.

Hello, can you please help me ?
You specified sample payload here:
TerrellFromLockhart wrote:
I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
About to read response at Thu Feb 20 15:40:20 CST 2014
SocketTimeoutException
2 - is clearly command
0 0 0 77 - frame length
1 - item Id
what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
Item id should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

Will the lightning to 30 pin adapter work with the irig midi interface?

will the lightning to 30 pin adapter work with the irig midi interface? Want to record guitar with garage band on ipad mini. need quick/easy way to connect USB to ipad mini

From both? Interesting. I like that though. I am looking for the controls to be on the iPhone rather than the stereo as it ***** finding songs this way. And yeah, $39.00 is a lot for this, and it is only roughly 8" long. Oh well, I will need it, so I will have to buy it. Thanks for the message back!

Will the lightening to 30-pin Adapter work with the older camera connection kit on my ipad 4 iPad (4th gen) Wi-Fi, iOS 6

Will the lightening to 30-pin Adapter work with the older camera connection kit on my ipad 4
iPad (4th gen) Wi-Fi, iOS 6

Yes, see my reply to your other post.

Will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard 753S Mobile Hotspot)??

will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard® 753S Mobile Hotspot)??

Yes. There are 2 ways you could use these devices:
Wirelessly 'join' the network. This would be slower and doesn't offer extending functionality.
Use an Ethernet cable (through Powerline if you can't run a cable). This is faster and offers extending functionality. I would recommend using Bridge Mode if possible.

Will the latest 2 TB Time Capsule work with Windows 7

I purchased a latest 2 TB Time Capsule
My computer Engineer says, it will not work with my Windows 7 PC.
He says I should purchase a Mac computer for using it
My aim is to have some important files, movies and music files in it and use it as
my iPad accessory.
Kindly let me know

Your computer engineer needs demoting..
The TC is SMB compliant when setup properly.
Press reset 10sec and redo the setup.
Download and install airport utility for windows. That will also install bonjour which helps things along.
Rename the TC and wireless names to short, no spaces pure alphanumeric characters.
eg TC name.. TCgen4
2.4ghz wireless name.. TC24ghz
5ghz wireless name.. TC5ghz (set the 5ghz name different on the advanced wireless page).
Lock wireless to a/n - b/g
Lock wireless channels to 1, 6, or 11 as the only 3 non-overlapping channels.
On the disk page.. set the guest account to on with read and write permissions.. that makes life a bit easier. Obviously if security is a problem don't do it.. but TC is a home device.. and is so easy to hack into it is a joke.. so setting high security is seldom of value.
Make sure the workgroup is set correctly .. by default WORKGROUP.
Note the IP of the TC .. generally 10.0.1.1 and if it is running as the main router to the network, you can now open the TC via windows explorer by typing the ip or the TC name in the address bar thus.
\\TCgen4 or \\10.0.1.1 (Obviously if you use different name or IP then replace with those.)
To access the TC from ipad you need a file browser app.. just look it up.. the ipad does not actually natively work with the TC.. so ipad is actually more of an issue than windows.
Also note carefully .. there is no backup mechanism to save stuff on the TC.. it is a backup target not a NAS. It is made for Time Machine on a Mac not for storing files. They are also not exactly reliable. It is sealed.. there are no spare parts.. if it dies, apple will replace not fix it. And they tend to have a short life. If you trust your files to it.. one day they will all be gone.. make sure you back it up or only keep copies of files on it.

Will the Itouch 2nd gen (SPECIFICALLY) bluetooth work with this item???

hi,
i was just wondering if the bluetooth enabled gen 2 itouch will be able to work with the Samsung HT-X810T (2.1 Ch Soundbar, DVD). i know the soundbar has bluetooth but will the itouch be able to send songs to this soundbar?
here's a link to the product: http://www.samsung.com/us/consumer/detail/detail.do?group=audiovideo&type=hometh eater&subtype=hometheatersystems&model_cd=HT-X810T/XAA

Thanks everyone.
Given that it states on the Box that the soundbar is "bluetooth" capable, i wonder if it 'doesn't' work with itouch bluetooth, then WHAT "will" it work with???
i mean, itouch/iphone is the most sophisticated media player out there right now, and if the "bluetooth" capable soundbar doesn't work with THIS item (ie. ipod), then i can't imagine what else it would work with!
i called samsung just now and after putting me on hold for 5 minutes to "check with a few people", he said (cautiously) that yea.....it should.

Will the Apple iPad Camera Connection Kit work with my iPhone 4s (7.0.4)?

The online 'Chat' representative told me the Camera Connection Kit would not work with my iPhone 4s.
The telephone support rep told me it would work!

No
You can look this up in the Apple store.
It tells you that it is only compatible with ipad

Publish for Approval - the new plug-in - doesn't work with Leopard

This aperture plug-in arrived for download just a few days before Leopard arrived. It worked great with Tiger. It doesn't work at all with Leopard. It appears that Leopard comes with a new version of Apache Server and it doesn't work with the Publish for Approval plugin. Does anyone know if and when an update will be released?

I'm not seeing the Java plugin in the plugins list in the System Details list.
Did you install the 32 bit Java version?
Do you see the Java plugin in "Firefox/Tools > Add-ons > Plugins"?
*https://support.mozilla.org/kb/Troubleshooting+plugins
*http://kb.mozillazine.org/Java

When is the new firefox 5 going to work with Gmail? I can't download that yet my android phone is connected to the gmail/calender and contacts....Thank you!

When I downloaded the new firefox 5, it didn't work with my gmail accounts....I need gmail to work with my phone/calender and email...Can't download it yet, but certainly will if/when it works together...any idea when?
Thank you!

Erm, Apple charging you $48? Was this an ASL charge? When you have a billing issue you can contact free over email here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Will the lightning to 30-pin adapter work with 2009 VW Jetta built-in iPod dock?

I have a 2009 Volkswagen Jetta that has an iPod dock in the center console and I'm trying to listen to music from an iPhone 5S.
Theoretically the Apple adapter should work with the VW iPod dock and my iPhone 5s. Can anybody confirm it? Also, will the adapter be able to charge my phone while connected?
The ultimate goal is to get music from my phone play through the car's sound system. So another related questoin: is there a way to connect a bluetooth/wireless adapter to the iPod dock and stream music via iPhone 5S's bluetooth feature without modifying the car?
What do you guys do and what are my options? Thank you in advance!

No idea about a VW but my 07 BMW Z4 with BMW fitted iPod connector works fine with the Genuine Apple adapter using an iPod 7 with lightning socket play and charge

Will the magic mouse track pad functions work with OSX 10.8.5?

Will the Magic Mouse track pad functions, i.e. scroll, zoom work with OSX 10.8.5.? Or do I have to upgrade to get those functions to work?

Yes, they'll work with 10.8.5.

Will the Wireless Keyboard and Magic Mouse work with my iMac G5?

My Dad just sent me his old iMac G5 17". and I was wondering if the Wireless Keyboard and Magic Mouse will work with it!? I don't really have a place to put the computer.. so I was hoping to get the wireless mouse and keyboard so I don't have to be connected to the computer.

I have the most recent (2 AA batteries, not 3) wireless keyboard and magic mouse running on a PowerMac G5. Your iMac G5 has the same class of processor, which isn't Intel. My Mac has built-in bluetooth support, which is what these products use. I'm unsure if your iMac has bluetooth built-in or not, but if it doesn't, you can purchase the Belkin bluetooth USB dongle. That has been widely reported to work just fine within OSX.
Anyway, yes, your iMac G5 can run the wireless keyboard and mouse. You just might have to work a little for it.
Good luck!

Will the lightning to 30 pin adapter work with ihome

I was wondering if, while using an iPoud Touch 5th Gen, a lightnight to 30pin adapter, and an iHome, would it charge and be able to play music? I saw something saying you won't but i wasn't sure if that was credible. Is there a way to make the iHome work with it if not?

The overview for the adopter says:
This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Support for analog audio output, USB audio, as well as syncing and charging. Video output not supported.
Thus it supports audio, charging and some other functions but not video
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=72

Will the new final cut pro x work with my Final cut pro version 6.0.6 data

Similar Messages

Maybe you are looking for