Will Twinbank memory work with 3 DIMMs?

Question

Will twinbank memory still work with three memory modules of PC-2700? I have two 256 DDR: bank 1 and bank 3, and I have another one I'd like to put in bank 2 for video editing. Will dual channel suffer with 768 MB?
Pie~
Athlon XP 1800+ Tbred @ 167 FSB 1.92 Ghz x11.5
K7N2-L
Ti-4200 128MB DDR 8X AGP
Sound Blaster Audigy PCI
Elixir PC-2700 DDR 256MB x 2 Twinbank
:::::::RAS# to CAS# Delay: 3
::::::::::::RAS# Precharge: 3
:::::::::::::::::::Cycle Time: 6
Sandra Memory Benchmark 2,521 mb/s
CPU VCORE 1.65

Answer 1

I'm with Backwoodz on the memory configuration...the first bus consists of SLOTS 1 and 2, and the second bus consists of SLOT 3. Just Look at the board and you'll see the first two memory banks grouped closer to each other and the third bank farther away...and if you want to look closer, look at the bus lines connecting the banks to the chipset/CPU.
But it doesn't matter...that third stick still gave me the BSOD. It was from a different brand...Spectek, whereas my current DIMM's are Elixir. All PC-2700 DDR 333, but only two are one-sided, and the remaining elixir is one-sided.
But still...it's PC-2700! Why the BSOD with a third stick?? It doesn't make sense because they're all running at the same speed and frequency (166).
Pie~