Will Windows 7 print to a printer connected to Airport Express

I have a late 2010 Macbook Pro with Lion. Just did a clean install of Windows 7 64 bit using bootcamp. Hooked up my printer via USB directly to the MBP while in Windows and loaded printer software. Prints fine. Then removed USB cable from MBP and re-connected it to Airport Express. Windows finds and connects to my Airport Express fine. When I try to print a document, Windows does not see the printer on Airport Express. Will windows not print to a printer on Airport Express or do I need to somehow tell Windows that the printer is on Airport Express? The printer prints fine from the mac side of my computer.

BobTheFisherman wrote:
You have to tell Windows to print to a network printer. Did you set up the network printer in Windows? How many printers do you see in Windows? If only the USB printer shows up then you did not tell Windows about the network printer.
In Windows Start > Devices and Printers > Add Printer. Make sure you select the network printer to add not a local printer.
After some more research, I found that I needed to download and run Bonjour. Which I did, and it seemed to load fine. I then went to the printer properties, port tab, and went to IP_local and selected config port. In the printer name and address box I put 10.0.1.1 (for airport extreme) and selected Apply. After this when I try to print, I actually get "printer ready" in the print dialoge box. When I select print, the doc goes to the print que and it says "printing" then disappears, but nothing prints. I have done research on THIS issue now and have found many others with the same issue, but not sure of the answer yet. Maybe I need to use Generic Postscript, but I am not sure where this is.

Similar Messages

After upgrading to OS 10.8.1 I can no longer scan from my Canon MP240 printer when it is connected to Airport Express.

I can no longer scan from printer (Canon Pixma MP240) when it is connected to Airport Express, although printing is no affected. However, when connected directly to MBP scanning works fine. I have tried all the standard remedies; reinstalling drivers, resetting printer system, selecting sharing options, but no luck. Previous to Mountain Lion this function worked fine. Any ideas how to regain this capability?
Thanks,
J.

I'm almost completely certain that the scanning feature worked before the update. Having said that though, I don't scan a great deal and it may be the case that when I have done, the printer was directly connected to the MBP. However, since I have a laptop it's far more logical that I would have had the printer connected to Airport Express for reasons of portability so I can't really see that I would have had the printer connected directly to the laptop. Besides this, I have no memory of having this problem previously. Therefore, I don't think my memory is to blame although of course, if it were I'd have no way of knowing!
J.

Can't print to HP 1410v connected to Airport Express

I'm having trouble printing to an HP 1410v connected to an Airport Express.
I've updated the Airport Express firmware.
I've updated OS X 10.5.7 with all the latest patches.
I've downloaded drivers from HP and Apple.
When I attempt to add the printer, my system sees the HP PSC 1410v printer as a Bonjour printer.
When I attempt to choose a driver, the wizard fails to locate a specific driver, and when I attempt
to choose a driver, none of the available drivers appears to be the exact fit I'm looking for.
I usually choose the generic HP PSC print driver, Gutenprint 5.1.3.
When I open up the print queue and try to print a test page, the log shows that the job is completed, yet nothing happens on the printer. Here's a dump of the console log from adding and attempting to print:
7/3/09 10:48:28 PM [0x0-0x12012].com.apple.print.add[114] nbp_send: nbpvalidateentity failed
7/3/09 10:48:28 PM [0x0-0x12012].com.apple.print.add[114] nbp_lookup: nbp_send failed got=-1
7/3/09 10:48:30 PM [0x0-0x12012].com.apple.print.add[114] nbp_send: nbpvalidateentity failed
7/3/09 10:48:30 PM [0x0-0x12012].com.apple.print.add[114] nbp_lookup: nbp_send failed got=-1
7/3/09 10:50:13 PM com.apple.launchd[79] ([0x0-0x12012].com.apple.print.add[114]) Stray process with PGID equal to this dead job: PID 141 PPID 1 SCHelper
7/3/09 10:50:57 PM com.apple.launchd[79] (com.apple.NetworkDiagnostics[204]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
7/3/09 10:50:57 PM com.apple.launchd[79] (com.apple.NetworkDiagnostics[204]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
How do I get this to work. I've seen similar behavior on my old Powerbook running Tiger as well.
Thanks.

Were these the instructions you followed:
http://tech.ifelix.net/1004.html
You could also try the Bonjour method (less manual configuration that the method above). Follow the links at the bottom of this page:
http://tech.ifelix.net/airport.html
A very complete discussion of printer troubleshooting as regards the Airport Express is found at:
http://docs.info.apple.com/article.html?artnum=107418

ITunes on Windows Vista PC can't connect to AirPort Express. PC returns error message -15000

I'm running PC with Vista and newest update iTunes.
I have set up a network through my AirPort Express, and i am streaming music wirelessly from my PC to AirPort. This used to work, but now i get an error message saying that an error occured while connecting to the AirPort, with the error code -15000. What's wrong? this used to work earlier?
This is particularly annoying since it used to work, until the latest (or the one before that) iTunes update.
Need help!

This is always a Windows firewall problem. Try opening UDP port 6002 in your firewall software.

HP Laserjet 1020 connected to Airport Express - Can't Print from Windows XP

Hi,
I have been using Airport Express for almost a year now, and it works fine with my old LaserJet 1200 connected to it, meaning that BOTH my ThinkPad(WinXP) and PowerBook(OSX 10.3) prints off the printer nicely. Last week I bought a LaserJet 1020 to replace the old printer. Now I can only print off my Mac, and not the ThinkPad.
Here are some additional information:
- Airport Express has been updated with latest updates.
- Using newest printer driver available from the HP website.
- New printer works when connected to ThinkPad via USB.
- New printer works when connected to Airport Express and printing performed using my PowerBook.
Therefore, My conclusion is that Airport Express and Printer is working just fine, and that it's just my ThinkPad not being configured correctly. (Although at the back of my head I am guessing that just MAYBE it's the Airport Express not accepting a different printer)
This is what I did to install the printer from my ThinkPad to work with Airport Express (which is not working):
1. Add a printer
2. Local printer attached to computer (no auto detect)
3. Selected existing TCP/IP port 10.0.1.1
4. Selected my new printer driver
5. Finish
I also tried a few things like:
- Deleting the TCP/IP port and creating it again before installing the new printer again.
- Off both airport express and printer and on again after about 10sec.Airport was on first, and after the LED turn green, printer was turned on and USB plugged into airport.
- Restarting my ThinkPad.
I have tried everything that I can think of, and nothing worked... hence this posting to get professional help.

Hi,
You might want to download and install bonjour for windows to your Thinkpad it is how I got my roomates XP laptop to print on AX.

How to get windows 7 pc to access a printer connected to airport express

Hi,
I have connected an airport express to my BT home hub and created a new Wi-Fi network. I have also connected a Canon MP550 series printer to the express which I can access to print from my macboon pro. However I am unable to print from my Windows 7 SP1 laptop even if I connect using the same Wi-Fi network. Have used Bonjour and it installs the printer but still cannot print from my Win7 laptop. Any suggestions why is it happening?
Thank you.

Hi,
I have connected an airport express to my BT home hub and created a new Wi-Fi network. I have also connected a Canon MP550 series printer to the express which I can access to print from my macboon pro. However I am unable to print from my Windows 7 SP1 laptop even if I connect using the same Wi-Fi network. Have used Bonjour and it installs the printer but still cannot print from my Win7 laptop. Any suggestions why is it happening?
Thank you.

I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?

I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?

Thanks for the quick reply.
So am I correct in saying trying to utilise the Airport Express to access the printer over the network was a wasted effort due to the latest iOS? I had read up on the express before purchase and believed that was one of it's main purposes.
Thanks again for the help.

How can I print from my IPAD3 to a printer connected to Airport Express?

How can I print from my IPAD3 to a printer connected to Airport Express? I have a HP printer and I can print from all my Windows PC and iMAC in the house. How can I print from my IPaD?

You cannot.
The USB port on the AirPort Express allow sharing a printer with Windows and Mac OS X, not with iOS:
"Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7":
http://www.apple.com/airportexpress/#wireless-printing
"AirPrint-enabled printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported":
http://support.apple.com/kb/ht4356
The HP ePrint app also does not provide such functionality:
Can I print from the HP ePrint mobile app using USB or Bluetooth?
No. You can only print directly to supported HP printers on a local wireless network.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en &product=5199463#N1176
Shlomi

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

Can i set the ipad to print to an Hp all in one that is connected to Airport express

Can i set the Ipad to print to an HP All-in-one Printer that is connected to airport express?

Hey Eugene!
Here is the website about AirPrint, if you scroll down it will say in details if your model is compatible with AirPrint.
http://www.apple.com/ipad/features/airprint.html

Printer connected to Airport Express not responding

I know I've done something wrong, but can't work out what it is. I went overseas for 2 weeks so turned off my computer, printer, Airport Express - at the wall. When I came back I turned everything back on but now my printer does not respond when I send it printing jobs. It has worked flawlessly in the past but I can't for the life of me, work out why it won't work now. I'm using a Brother Mono Laser printer Model HL-1450 - I even downloaded the latest driver from the Brother website but that makes no difference. If I connect my printer directly to my iMac - it works like a charm. However, when connected via USB to the Airport Express nothing happens. I checked out the Mac help 'connecting a USB printer to AirPort base station but it says '5. In the Printer pop-up Menu, choose Bonjour and then choose your printer'. Bonjour doesn't show up, my Printer does, but nothing happens. The printer dialog box just shows the job spooling and it never gets past about 3 or 5%.
Any help gratefully received before I tear out all my hair.
Cheers
Tricia

hello there,
first i would like to ask you that what are the process for setting up your printer to airportexpress? i m having problem with my macbook that i couldnt print through it. i have a HP Deskjet F2100 printer and connected to airport. i could print from my another laptop that has WinxP but from my macbook i couldnt print, it says unable to connect to printer..... when i added my printer from printer utility i got browse printer and there i could find my printer and the connection is bonjour but still i couldnt make print. and when i added printer i didnt get any popup like bonjour.please help me.
and i would like to suggest you that turn off all ur printer and imac and reset your airport express, press the reset button for 2 to 3 second until u see flashing light and wait until it becomes green and turn ur printer(should be connect to airport) and imac and from imac setup your airport u may find in application utility and setup again i hope this will help you.
cheers:-))

Printer connected to airport express...shows up on iMac but doesn't on my ipad 2. What am I missing, please?

printer connected to airport express...shows up and prints on iMac but the printer doesn't show up on my ipad 2 when I try to print. What am I missing, please?

Take a look at Printopia to see if it will do what you want.
There is a free trial, so you will know if it works before you buy. More info:
Printopia - Ecamm Network

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again.

Why would you need to connect an AirPort Express to a printer to print wirelessly when you could just use AirPrint?

What is the point of connecting an AirPort Express to a printer when you could just use AirPrint from an iPhone?

All you guys are mistaking the Airprint system. Wireless printing is a Misnomer. Nothing prints wirelessly. Both the printer and the computer, or i or android device have to be all connected to the same LAN. They can be connected by a wire or a WiFi signal but they all must be on the same LAN.
Airprint is a Driverless printing system where No Specific Printer drivers have to be installed on the computer or other device. Even with the Airprint system both the printer and the device you are printing from have to be on the same LAN.

Can I plug any USB printer that supports AirPrint into the AirPort Express?

I'm interested in getting the new AirPort Express to print from my iPhone. Will any Airprint printer work with my iPhone and iPad?

Hi autefrum,
It sounds like we are confusing AirPrint printers with printers capable of being used with an AirPort Express for wireless printing.
AirPrint capable printers have wireless built in so you can print "directly" from your iPhone, no AirPort Express needed.
The AirPort Express has a USB port to which you connect a "regular" USB printer so you can print to that wirelessly. Effectively, it makes your standard USB printer an AirPrint printer by supplying the wireless connection. So if you have a USB printer already, the AirPort Express may allow you to print to that.
From the spec page, "USB 2.0 port for connecting a USB printer" and "Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7.
ivan

Printing from wired PC to wireless AirPort Express

Need some help, please.
I have an EPSON RX680 Connected to AirPort Express, which is joined to my existing wireless netork. I am able to print from my wireless laptop, but not my desktop, which is wired to my Lynksys wireless router.
The AirPort utility on the Desktop recognizes the AirPort Express and that the printer is attached there, but I have tried to manually add the printer using the TCP/IP 10.0.1.1 and other variations, such as port name IP_10.0.1.1 and 10.0.1.1_1 (the second one auto populated), but nothing is working right now.
Is it possible to print from the desktop wired through the lynksys to the printer connected to the Express when the Express is "piggybacking"? I do not have a wireless card on the desktop.
Thank you!

You have to use the Bonjour Printer Wizard. If it's not showing on your Start Menu, uninstall Bonjour and then download it from Apple (http://support.apple.com/downloads/BonjourforWindows) and install again - the shortcut will be created.

Will Windows 7 print to a printer connected to Airport Express

Similar Messages

Maybe you are looking for