Wily Instroscope - OS Independent installation does not complete.

I have been trying to install the wily introscope with the OS independent software and the install is not finishing. I see no errors, and I recieve no log file to show me if any part of the install was successful. The version 8 guide from Nov. 2008 states, that I should have an install directory containing a introscope log that shows me how many lines were Successful, Warnings, NonFatalErrors, and FatalErrors, but this is never created.
I am running the install in /usr/sap/ccms/<sid_00>/wilyintroscope.
I am installing this on a Solaris 5.10 SPARC x64bit system and I am running this in unix.
I have copied the eula.txt, osgiPackages.v1.unix.tar, SAPISEM80_03-10007429.SAR, and SAPISMM80_03-10007429.SAR to this install location.
I edited the eula.txt file to =accept, and I edited the install.properties file to contain the unix install path of /usr/sap/ccms/<sid_00>/wilyintroscope/.
I had our unix team install a x64bit java version so I would have a java 5 VM as the install guide requires.
This is the install command I kicked off as <sid>adm.
/usr/jdk/jdk1.5.0_16 -classpath introscope8.0.2.0otherUnixSAP.jar u2013install
It begins, but the installation will never finish. I had our unix support run a trace on the background proress and we see reads occuring, but after 2 hours it still isn't complete. I've even tried excuting the same steps with the x32 bit installation .bin file and I receive the same results.
Do I need to edit the <sid>adm environment and point the wily home to my installation directory I created? In the Version 8 guide this is a later step, but at this point I am not sure what to do.
Thoughts?

Turns out the unix tar was corrupt. The clients virus scanner stripped out most of the file!

Similar Messages

  • Adobe CS6 re-installation does not complete

    Hi! After os update my Adobe CS6 re-installation does not complete. What do I need to do? Br. Heidi

    uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Appfabric installation does not complete successfully

    When I install the Sharepoint 2013 Prerequisites, Why I'm getting this error
    "AppFabric 1.1 for windows server installation did not complete successfully"

    Hello ,
    Could you please describe the problem in detail ?
    Also find the below workaround for same ...
    SharePoint
    2013 Prerequisites fails with MSI Installer error code 1603 while installing AppFabric 1.1
    Best Regards Kuldeep Verma
    Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

  • SCCM Client push or manual installation does not complete

    Hi All,
    I have deployed SCCM 2012 R2 in my lab environment. It has been deployed successfully. I have a issue in which the clients are not getting installed both manually and by pushing the agents via the console. 
    My servers are as follows:
    SCCMSVR.labtest.com  - Is the SCCM server and Fail back status point.
    Server.labtest.com - Is the Domain controller, SQL server
    SCCMTEST.labtest.com - A testing machine to push the client and to deploy patches in it.
    Site code is LAB
    I ran the setup using the following command.
    I have shared the ccmsetup in a share so the command is as follows:
    \\sccmsvr\Client\ccmsetup.exe /MP:SCCMSVR /Logon SMSSITECODE=LAB FSP=SCCMSVR
    But when i check the task manager the process of ccmsetup.exe but it does not change to CCMEXEC.exe
    I waited for an hour but still the same issue. (This was done in the DC Server.labtest.com)
    Screen shot of the DC  Machine:
    When i do a client push installation in a testing machine (SCCMTEST.labtest.com)  i still the same issue. I pushed the client still the same issue
    In the task manager the process of ccmsetup.exe but it does not change to CCMEXEC.exe.
    Screen shot of the second machine:
    Also checked the control panel. Dint find the config manager options there on both machines.
    Also turned off firewall on all 3 machines  but still the same issue.
    Analysed the event logs on all the servers. The client machines did not have any relevant events.
    The SCCM server had this event. Not sure if this is causing the issue.
    Event id 2344
    On 9/28/2014 3:26:48 PM, component SMS_DISTRIBUTION_MANAGER on computer SCCMSVR.LABTEST.COM reported:  Failed to create virtual directory on the defined share or volume on distribution point "["Display=\\SCCMSVR.LABTEST.COM\"]MSWNET:["SMS_SITE=LAB"]\\SCCMSVR.LABTEST.COM\".
    Possible cause: Distribution Manager requires that IIS base components be installed on the local Configuration Manager Site Server in order to create the virtual directory.  Distribution Manager also requires that IIS Web Services be installed on the Distribution
    Point Server that needs to support Background Intelligent Transfer Service (BITS).
    Solution: Verify that IIS base components are installed on the local Configuration Manager Site Server, and IIS Web Services are installed on the Distribution Point Server.
    Can any one please help.
    Gautam.75801

    Hi Kashif,
    Thank you for your valuable help. As you mentioned the IIS 6 WMI compatibility Feature was not installed. Once i installed and rebooted the SCCM server and pushed
     both the agents manually and by Pushing it via console and it succeed. How ever i got some errors on both the systems The trace log tool during the installation but it succeed.
    What i would like to know is that is it common to get errors like the below while pushing a agent automatically or manually ?
    1. MSI: Action 1:25:44: CcmRegisterComponentsRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
    (Got this multiple times)
    2. MSI: Warning 25702. Failed to uninstall PrepDrvr.Sys for Software Metering Agent.
    3. Failed to load mdmregistration.dll. Continue deployment.
    4. Failed to load mdmregistration.dll with error 0x8007007e
    5. File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' does not exist. Discovery failed.
    6. File 'C:\Windows\system32\msrdc.dll' does not exist. Discovery failed.
    7. Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
    8. Failed to check url http://SCCMSVR.LABTEST.COM/SMS_DP_SMSPKG$/LAB00002. Error 0x80004005
    9. Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
    10. As per the screen shot.
    Gautam.75801

  • Flash Player installation does not complete

    Help! I am at my wits' end! Windows 9, 32-bit. I have uninstalled older versions of Flash Player and appear to be downloading it but after several hours' waiting, am still on 'Step 2' of the download. Task Manager suggests install_flashplayer is a process but never completes. Have followed instructions on Adobe website, security to Medium, ActiveX Filtering off etc. Any ideas gratefully received.

    Download the Adobe Flash Player installer directly by right clicking the following link and selecting "Save target as".
    Flash Player for ActiveX (Internet Explorer)
    Save the file to your downloads folder or desktop, wherever you can find it - DO NOT run it yet.
    Reboot your system - a hard reboot - shut it down, waith 30 seconds and then restart it.
    BEFORE opening anything else, locate the downloaded installer and run it.

  • Mac OS Mavericks installation does not complete.

    Hi All,
    Does anyone have a solution for this install problem?
    When attempting to upgrade to Mac OS Mavericks from Montain Lion 10.8.5, the installation dialogue comes up, no errors are shown, then asks to restart the computer to complete the installation.
    The computer restats, log back in, and nothing happens.
    No installation dialogues, no error messages, it's just back to good ol' 10.8.5 like nothing happened.
    I've retried this 3 times, by opening the Mac OS Mavericks Install App to restart the installation, but this bad boy refuses to install.
    FileVault 2 is enabled,which I thought might be interfering with the install, but doing some googling around, it looks like Mavericks should install fine with FileVault active.
    In case it helps this is an early 2013 MacBook Pro 15" Retina notebook.
    Any ideas?

    Hi thanks for the quick reply.
    Yep may have to end up disabling FileVault, it's a last resort as it will decrypt the whole disk.
    Rebooted to the disk utility with disk verify and repair, no problems there. but at least the disk is fine

  • Installing Acrobat X - wizard is interupted, installation does not complete

    I am installing Acrobat X on a new Win 7 machine with no prior versions of Acrobat.  The installation gets close to the end and I get the message that "the wizard was interrupted before Acrobat Pro X could be completely installed".  The wizard exits and I can't install.
    Thanks for any help!!!

    That was it!  I deactivated Microsoft Security Essentials and the
    wizard finished the installation perfectly.  Thanks so much!

  • ITunes installation does not complete

    When running ITunes8 (8.0.2.20) Setup (no other programs running), after passing the step Installation Options, I click o nthe button Intall.
    At this moment I get the following message:
    'There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.'
    Can anyone please halp me with that?
    I'm getting crazy here...
    Thanks in advance for our help.

    Problems with Apple Software Update produce a similar but not identical error message. I might be worth trying the method for ASU problems.
    Go to Add remove programs and find Apple Software update. Try repairing it.
    Select Change>>repair.
    If that works, try installing iTunes.
    Otherwise try uninstalling any instance you find of Apple Software update. That probably will not work if repair didn't.
    Next try an installer cleanup.
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
    http://support.microsoft.com/kb/290301/
    To run the program – All Programs>>Windows Install Cleanup
    Remove any instance you find of Apple software update with the cleanup utility.
    Download a fresh copy of the iTunes installer and save it on your desktop.
    http://www.apple.com/itunes/download/
    Restart your computer and try installing iTunes.

  • Creative Cloud Installer does not complete installation

    Hey Folks,
    I've been trying to install Creative Cloud, but the install stops mid way through installing the Adobe Application Manager. The Adobe Application Manager folder appears in the Utilities Folder, but has nothing in it. I then get this message.
    I've tried Uninstalling Adobe Creative Cloud, but even the Uninstaller hangs in the end and the window wont disappear.
    I've used the AdobeCreativeCloudCleanerTool and then tried reinstalling after restart.
    I've tried installing the stand alone version of the Adobe Application Manager with the same results. i.e. the the installer stops short.
    I also tried starting a new admin account on my computer and tried installing CC with the same results.
    As per advice from another post I tried changing the Library\Application Support\Adobe\OOBE folder name.
    I've also tried an exorcism, pouring boiling water into my lap and waving chicken feet over my computer, but no dice!!!
    Any tips or advice would be greatly appreciated. I'm on Mac 10.8.2.
    Cheers,
    Dave

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • J2EE ADDIn INSTALLATION DOES NOT MOVE AFTER ABAP UME STAGE

    Hi,
    I am installing java add-in for ABAP system for NW2004s SR2 system. I am able to complete SCS and DB instances. But during installation of CI at step u201CSAP system > ABAP UME u201Cafter
    pressing u201CNext u201Cbutton the installation does not continue without any
    warning or error message, It asks for SDM password and J2EE_ADMIN password, even after I give the password, the installation does not go forward. After pressing next it still comes to the same step.
    I had done a proper un-install through SAPinst, cleaned up all the j2ee and SDM folders manually, changed the jdk version, etc and tried, but still the same issue.
    I had created j2ee_admin, sapjsf, j2ee_guest users manually, cleared j2ee and SDM folders manually and tried to re-install but the same issue.
    There are no error messages or logs given, but just the issue. Any help at the earliest would be appreciable.
    The only error message I can read is as below:
    INFO 2008-05-28 17:06:38
    Creating file
    /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.jlaunch.
    INFO 2008-05-28 17:06:38
    Creating file
    /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
    INFO 2008-05-28 17:06:39
    Output of
    /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch
    UserCheck.jlaunch com.sap.security.tools.UserCheck
    /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install
    -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a
    checkBeforeCreate -u J2EE_ADMIN -r SAP_J2EE_ADMIN -message_file
    UserCheck.message is written to the logfile
    /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
    WARNING 2008-05-28 17:06:42
    Execution of the command
    "/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch
    UserCheck.jlaunch com.sap.security.tools.UserCheck
    /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install
    -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a
    checkBeforeCreate -u J2EE_ADMIN -r SAP_J2EE_ADMIN -message_file
    UserCheck.message" finished with return code 254. Output:
    INFO 2008-05-28 17:06:42
    Removing file
    /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/dev_UserCheck.
    System details
    Kernel release: 95 64bit
    Unicode: - NO
    Operating system: SunOS 5.9 Generic_122300-08 sun4u sparc SUNW,Sun-Fire-15000
    Thanks,
    PK

    Hi markus,
    May be this additional information would help.
    the sapinst_dev.log shows the following:
    INFO       2008-05-30 13:37:38 [syuxcpath.cpp:351]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.jlaunch.
    INFO       2008-05-30 13:37:38 [syuxcpath.cpp:351]
               CSyPath::createFile()
    Creating file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
    TRACE      [syuxctask.cpp:1355]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 22550
    INFO       2008-05-30 13:37:39
               CJSlibModule::writeInfo_impl()
    Output of /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message is written to the logfile /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
    WARNING    2008-05-30 13:37:44
               CJSlibModule::writeWarning_impl()
    Execution of the command "/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message" finished with return code 254. Output:
    INFO       2008-05-30 13:37:44 [syuxcfile.cpp:280]
               CSyFileImpl::remove()
    Removing file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/dev_UserCheck.
    TRACE      [iaxxejsexp.cpp:199]
               EJS_Installer::writeTraceToLogBook()
    NWException thrown: nw.ume.generalError:
    . For more details see output of logfile:
    TRACE      [iaxxdlghnd.cpp:150]
               CDialogHandler::doHandleDoc()
    Dialog validator of dialog :  d_nw_ume_doublestack_passwords
    called by :|NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|askPasswords
    returns false without any additional information.
    Please inform the installation development.
    TRACE      [iaxxgenimp.cpp:1155]
               showDialog()
    waiting for an answer from gui
    nzlsfn23:bd2adm 93%
    Regards,
    P. Kumaravel.

  • "HP Solution Center cannot run because your device installation is not complete"

    I cannot use HP Solution Center because I only get this message when I start it: "HP Solution Center cannot run because your device installation is not complete". I am running Windows XP with an HP PhotoSmart Premium. I can print just fine and the printer is recognized by the PC and the network. I get the same problem whether connected wirelessly or through USB. I have re-installed all software multiple times. Please advise on how to get Solution Center up and running. 

      I had to do a total uninstall and reinstall of the driver. However, as you will see from this and other Support Forum threads there seem to be multiple stumbling blocks to the uninstall/reinstall process. Seems very glitchy. After nearly two days of unsuccessful tries I finally got it done. I did find three different official HP scenarios for the process, including one automatically sent to my desktop by HP upon one of the earlier failures. That sequence did not work work for me, but it was close--I got a partial install. But on another HP help file titled "Product Software Installation stalls or stops in Windows 7 with a USB connected product HP..." I found a six step process (with details for each), and it worked for me on the second try. Here are the six steps, plus extra things I did or discovered that could have helped make it work. I did step 5b. first: downloading and saving  the HP driver file on my computer before starting other steps, since I elected not be be on the internet as I did the installation. 1. Uninstall the HP printer software. See my note below about four ways HP lists do to this. I used two of them.2. Turn off the 'terminate and stay resident programs (has to do with system configuration). See HP details.3. Clear temporary files and folders through Windows accessories.4. Disable firewalls (see my note below about this)5a. Disconned the cable from BOTH the printer itself and from the computer, BUT TURN ON the printer.5b. Get the lastest version driver for you printer from the HP site and save it where you can find it. (I did this first, before other steps, so I could install off-line)5c. Install the driver software that you saved. (see my note below about an optional step that helped me with this, so the install will complete, and not hang up)6. Enable the start up software that was turned off with step 2. (See HP details) Notes: there are versions of HP instructions that  skip steps 2 and 6 and or 3 and 4, but that would not work in my case. I describe the steps that finally worked in case they can help someone else--this has been so frustrating. This uninstall/install process seems to be very touchy and perhaps changes depending on your printer or other configuration of your computer: Note about step 1: I found an HP document that listed four ways to uninstall. On my final and successful attempt I actually used two of the techniques. First I used the HP uninstaller program from the start menu program list on my computer stored with other HP stuff there. When I rebooted it did not appear that any HP programs were removed, but who knows, perhaps this got rid of some hidden file somewhere that had been causing all of the problems. Then I used the regular uninstall process from the control panel, and that worked. All HP programs were gone upon reboot. Note about step 3: I counld not believe this would help, but did it, and again, who knows, perhaps this is critical. Note about step 4: I assumed that step two 'terminate and stay resident programs' turned off my McAfee firewall and antivirus, so I did not turn it off. And I elected to be off the internet during install because I am always fearful about turning off those programs. However, and this may be the source of problems for many people, the HP list was very specific to turn off the Windows 7 firewall. I checked it and it was running, even though I thought McAfee was in charge. So I did turn off the Windows 7 firewall. Subsequently I learned that many people who have upgraded from earlier Windows operating systems to Windows 7 have the Windows firewall operating along with their other firewall, without knowing it. Apparently this does not happen if you did a clean install of Windows 7 rather than an upgrade install. Note about step 5c: On many of my tries the installation program would not terminate or complete, and I would get a partial install that allow some functions of the printer to work, but not Solutions Center. The only way I found to prevent this was at the step near the end, where you hook up the printer, select the box that says it's okay to connect it later. The installer program dumps an icon on you desktop that allows you to connect the printer after the installation shows complete and terminates by itself. By clicking the icon and plugging the cable into computer and the powered-on-printer when directed, the device installs perfectly. That was the only way I could get a full install, or get the installation to terminate. During the two days of trying to make this work I also reinstalled the latest version of Flash player since I read that HP Solutions Center needs it to show screens on your computer about printer functions. Of course downloading Flash onto a 64-bit version of Windows 7 is a little tricky too, but not that difficult. I do not know whether that was important, but it is one more thing to try if you can't make your Solutions Center part of the printer program work. I learned way more about the unintall/install process than I ever wanted to know. Sorry to be so wordy, but after two days of frustrating work on this I thought I should share this, in case any of these ideas could help someone else who is hung up on this. Perhaps there is an easier fix somewhere. The six-step process was on an HP help site and was not even for my specific printer, but the similar list from my model did not work. Wish I knew what the secret to success might have been.  

  • Does not complete processing of "Home" of the Creative Cloud desktop application

    Someone know the way to fix the following issue?
    After installed some Creative Cloud Software, I had uninstalled Adobe application manager manually and installed Creative Cloud desktop application manually.  because automatic upgrade of creative cloud desktop application from adobe application manager does not work.
    The creative cloud desktop application setup had been completed successfully.  but,  seems that  it does not complete processing of displaying the history if I chose "Home".   The progress Icon will stay in continuity.  And any contents does not show on it.
    Regards,

    I'm posting this in a few threads to try to catch everyone having the problem.
    The good news is that I found a way to fix this.
    The bad news is that it involves uninstalling everything.  (Note that reinstalling over the old installs won't cover it, I'd tried that one once too. You'll have to fully uninstall each program before redownloading/reinstalling.)
    I spent many hours with tech support yesterday running through options unsuccessfully, and can very thoroughly assure you that uninstalling the desktop app, renaming any number of folders, and new user accounts all will not help you.  From doing a lot of research on various similar problems, it appears that it's possible for this to spontaneously resolve within a couple of hours.  If it doesn't, though, you're stuck with fixing it yourself.
    The best theory I found was that it's caused by updating or installing a program without doing it through CC.  If you've downloaded an installer and run that or clicked "Check for updates" in the help menu inside one of the other apps, this is you.  Other people have noted that if you know which app you did this with, you can uninstall that one to fix it.  If you have no idea, the simplest path is to just uninstall everything.  You can try doing things one at a time, but you'll need to reboot every time the uninstaller tell you to do so and then see if it's fixed.  (Personally, I got sick of that by the second time through.)  I do remember clicking "Check for updates" right around the time this started for me, but I don't know which program it was in, just that I knew it would trigger the updates I knew existed but CC wasn't acknowledging.
    I will also note that once I had everything uninstalled, I ran the Cleaner Tool and did a "Clean All". If you're going to or need to do that, make sure you've backed up all of your preferences, customizations, plugins, and so forth as needed.

  • The Windows Installer does not permit installation from a RDP connection.

    Hello!
    Today when was installing Exchange 2013SP1 onto one of my virtual machines I got the following error:
    This error has suprised me in a lot of ways: 1) it was my 10th, or 20th or ... installation of Exchange on to the same test VM and this error has never arised before, 2) it's rather tardy error as Step1 and Step2 completed successfully in spite of
    "The Windows Installer does not permit installation from a RDP connection." 3) I was using
    Virtual machine connection - not RDP connection!
    Thank you in advance,
    Michael

    Hello!
    Today when was installing Exchange 2013SP1 onto one of my virtual machines I got the following error:
    This error has suprised me in a lot of ways: 1) it was my 10th, or 20th or ... installation of Exchange on to the same test VM and this error has never arised before, 2) it's rather tardy error as Step1 and Step2 completed successfully in spite of
    "The Windows Installer does not permit installation from a RDP connection." 3) I was using
    Virtual machine connection - not RDP connection!
    Thank you in advance,
    Michael
    It looks like the installation files are being shared over a terminal services connection (based on what you are saying, I'm guessing you're using Hyper-v and it's using TS to present the files).  I always run into mixed results when I run installs from
    a path not local to the server.  Can you copy the install paths locally and rerun setup?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • Weblogic 10.3.2.0 installation does not pick the right JDK

    The installation does not pick up the right jdk version that is jdk 11.6.0_11 . Although the machine is running the same. Instead it picks up jdk 1.6.0_14. have tested the machine many times. I am Installing Oracle SOA Suite 11g.

    Inside "startWebLogic.sh" file add the JAVA_HOME like following (just below the "setDomainEnv.sh" call):
    JAVA_HOME=C:\bea103\jdk1.6.0_17
    See if this helps.
    Thanks

Maybe you are looking for

  • 'open in new tab' opens new window instead

    My system just went through a bunch of updates, maybe that was Windows 7, but I'm unsure. I didn't initiate them. Anyway, now when I right click 'open in new tab' instead a new window opens. I have read a bunch of other similar posted questions the a

  • 17" Macbook pro appears to be eating hard drives...

    I've got a 17" macbook pro. I'm running Boot Camp and windows XP on it... A few months after getting it, my computer started having weird intermittent issues... the hard drive seemed to run alot, it would crash, and just other weird stuff. I reformat

  • Application Errors Installation

    Hello everybody, First of all, I want to specify that I'm not English native speaker. I want to apologize for the may be future mistakes.  My problem is the next :  Since few time I can't install applications anymore. You will se on the picture attac

  • ITunes not saving my media details edits

    I imported some old music from a hard drive, but when I go into Get Info and amend things like Artist Name etc none of the details save. As soon as I click OK it reverts back to it's original details. Please help

  • About Exceptions and Logging

    Hi all, - In a project, we will throws or catch direct an exception or write our exception ? Ex : throws or cacth : exceptions in java.lang.Exception Or : CustomException How many Exception class we will write ? and how we write ? - I use log4j. We u