Win 2102: existing number of virtual desktops is not valid after errors while deleting , how to fix it ?

Hello everyone,
I created a virtual desktop collection with a name format like this , prefix = VDI-, suffix= 1 .
so when I created the first VMs , I had VDI-1 and VDI-2 , later after recreating the VMs, adding new ones and deleting others, the suffix numbers are no longer in sequence , like I started having VDI-1,VDI-2,VDI-8,VDI-9.
I realized I had one problem that probably caused this, because when I delete a VM , I get a warning message:
"RD connection broker could not delete the computer account object from active directory."
so I searched about that error and I added the needed permissions and now deleting seems to work without any warning.
now I have two VMs, when I go through the wizard , the first page it shows I have 2 VMs but in the second page it shows I have 11 ! is there a way to reset the count ? if I delete the entire collection and create it again , will I have any problem with the
roaming users profiles ?
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
You can specify the count for RDVH as how many desktop wants for particular host. You can do this “Specify Virtual Desktop allocation” while creating virtual desktop collection. Other than that you can also use PowerShell command to achieve your task.
For more details you can refer beneath article.
1. Fumbling through Windows Server 2012 Virtual Desktop Infrastructure (VDI)
2. Deploying VDI for RDS 2012 / 2012R2 – Part II – Publishing a Windows 7 Pooled Desktop
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

  • When I enter my serial number, it says it is not valid

    Is there someone I can speak to because this is a waste of my time.  I just need this fixed and cannot spend hours on this stupid discussion board becasue I cannnot type and want my problenm fixed,

    Hello,
    first: we here in the forum are not employees of Adobe, we are users like you. But I'll try to show you some ways to get a satisfying result:
    Incase there is already a serial number in their database: Find your (real) serial number quickly >>> When you purchased your product, you could have received a serial number, a redemption code, or a product code. Follow the steps below to find your serial number. >>>
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    Did you purchase your product from these firms like Amazon? If yes, this is not a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
    The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
    And you can have a look there: "Telephone numbers of customer service and technical support Adobe worldwide"
    >>> https://www.adobe.com/eeurope/elicensing/licensemanagement/alm/contact.html (I used Europe's link, but that makes no difference.)
    If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
    All the best!
    Hans-Günter

  • I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

    I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

    iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

  • Hi, when i buy the Canon 5D mark III I was given a version of Adobe Lightroom 5, I install Lightroom and when I go to put the serial number tells me it's not valid, do not know what I can do. Thank you.

    Hi, when i buy the Canon 5D mark III I was given a version of Adobe Lightroom 5, I install Lightroom and when I go to put the serial number tells me it's not valid, do not know what I can do. Thank you.

    Try serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Error - The version number in the package is not valid. The version number cannot be greater than current version number

    whats does this error mean
    i download 2008 r2 and try to open package but still getting error
    Error 1
    Error loading  The version number in the package is not valid. The version number cannot be greater than current version number.  
    Error 2
    Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".  

    can you tell me which version it is >
    i try to fix in dtexec
    getting following error :
    Started:  2:02:13 PM
    Error: 2015-01-30 14:02:14.68
       Code: 0xC000F427
       Source: Member Eligibility
       Description: To run a SSIS package outside of SQL Server Data Tools you must
    install Member Eligibility of Integration Services or higher.
    End Error
    Warning: 2015-01-30 14:02:14.69
       Code: 0x80019002
     Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution
     method succeeded, but the number of errors raised (2) reached the maximum allow
    ed (1); resulting in failure. This occurs when the number of errors reaches the
    number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
    rrors.
    End Warning
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  2:02:13 PM
    Finished: 2:02:14 PM
    i cannot upgrade original package

  • This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." How to fix this installation error?

    Does anyone know, how to fix  ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?

    At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error while deleting personnel number

    when I ran a report RPUDELPN  for deleting Personnel Numbers The Personnel Number Name got deleted but not the personnel numbers relationship with Position . I can see only Green Color without Name. when Iam trying to delete the relationship it is throwing an error . Error in deletion of personnel numbers . How can we resolve this please throw some light on this
    Edited by: My SAP Cronies on Jan 19, 2012 8:01 AM

    Hi,
    Pls check the table HRP1001, can you find the PERNR in that table with position? table can be checked in SE16 > HRP1001
    Thanks,
    Nirali P
    Edited by: Nirali P on Jan 19, 2012 8:30 AM

  • Serial Number is "not valid" after switching to a new computer

    I just upgraded from an old white Intel iMac to a new 27" iMac, and after I moved all my files over with the Migration Assistant, my Final Cut Studio doesn't work. It asks me for a serial number, I put in the one I've been using forever, and it says it's not valid.
    Any idea what's going on? I'm working with the new version of Studio, if it matters, and it's going it when I try to open any of the programs included in the suite.

    1. Never EVER migrate pro apps.
    2. see #1.
    3. see #2.
    Time for an erase of the software (look up Digital Rebellions FCS remover) and do a clean installation of the FCS suite. If that doesn't work, do a complete erase of the system hard drive and install everything from scratch.
    x

  • The serial number for my product is not valid, why?

    Hi, the S/No. for my Adobe Acrobat XI which was sent via email and also on the downloaded products page when applied is coming up not valid for this product? Please assist?

    First see:
    My serial number doesn't work : http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html
    Then, if that doesn't help:
    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • Remote Desktop sound stops working after a while.

    Has anyone a solution to this problem of the sound just dropping out of a RDP connection after a day or two?
    Win Server2008 (32 bit) running as a Terminal Server.
    WIN 7 Clients (32 bit)
    Sound is absolutely critical on the program being ran on the WIN7 clients when connecting via RDP to the Server 24/7.
    But the sound just stops working on the RDP clients after a day or two.
    If I minimize the RDP session and try the sound from the native windows session it works, but sound is not working within the RDP session.
    and it takes a restart of the RDP session to restore sound, but then aftera day or two I get a call to say the sound is no longer working- a restart of the RDP sessions restores the sound.
    I have checked the Environment sound settings in the RDP setup on the clients and have them set to play on the client, and I have checked that sound is not disabled in the Terminal Server end of things for RDP sessions.
    I would really appreciate to help with this if anyone has suggestions.

    OK after updating the Server and clients I am still having this issue :( 
    and just today after no sound problems for 6 days the sound dropped out on a couple of RDP sessions, yet the sound on the client itself worked fine when tested (minimise the RDP session).
    It took the RDP sessions to be restarted to restore the sound within the session.
    I have found similar (old) thread regarding this problem:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/958fd891-6f55-432b-8268-a326ac6b2b2e/sound-in-remote-desktop-session-stops-working
    but no one has informed about if as solution was ever found.

  • Desktop setting not saving after system update

    Hi All,
    I did a system wide update including the changing the kernel from 2.6.25 to 2.6.28 and now I cannot change my desktop setting.
    that is, my desktop background picture and font size is not saving. First I could not shutdown and i read the forum where
    it was suggested to downgrade from hal-0.5.11-7 to hal-0.5.11-4. and that work for me. but my system
    not saving my desktop setting. I have the "automatically save session on logout" check.
    I am using xfce4 as my DM
    any help please.

    hi,
    check your home folder permissions. open up your /home/ right click on your username folder click properties and in permissions dialog check that owner can view/edit files and then check something like apply to all subfolders and files

  • Error while deleting UIElements from existing view of webdynpro project

    hiiii everybody,
    I have an existing project which i need to modify.so when i am trying to delete some UIElements from existing view and saving the metadata, itz showing error as for example:
    1)Group Group2 header is missing
    2)wdThis cannot be resolved.
    please do help out.
    Thanks and regards,
    Parama.

    Hi,
    First error comes when you deleted Group header but Group UI is there.
    For Second one, check the names of UI elements different or not.
    Regards
    LakshmiNarayana

  • Error while deleting Cash Journal (Numbering group 1001 can be used only for one CoCd and cash journal number)

    Hi,
        While i am try to delete Cash Journal system throws me error (Message No.:FCJ065: Numbering group 1001 can be used only for one Co. Code  and Cash Journal). Kindly provide me solution on that.
    Regards,
    Tarak

    Hi Tarak,
    You can use the config nodes in SPRO to set up number ranges for your cash journal documents.
    IMG Path> FI Global Settings>Bank Accounting>Business transactions>Cash Journal
    Define Number Range Intervals for cash Journal documents
    Define Numbering Groups
    Define Number Ranges for numbering groups
    After defining the number group here, you assign that in "Set up Cash Journal" Check if there is any clash anywhere in your configuration for different cash Journals.
    Regards,
    Kavita

  • Desktop Manager Not Working After Security Wipe

    I had to do a security wipe on my Tour to fix a problem I was having with the Bluetooth on my phone (which surpisingly worked!).  However, now when I try to sync my phone with my computer, Desktop Manager has a problem.  When the program gets to synching my calendar, Desktop Manager stops working.  The screen goes white, and I get a message saying that it has stopped working.  I tried clicking the Debug button, but it didn't do or tell me anything.  It seems to fail when it gets to item 26 of 191 in my calendar (from the status bar that appears when synching), but I have no idea what that item is.  Any ideas as to why this is now happening or how I get figure out what calendar item might be causing the problem?  Thanks.

    Interesting!
    May have to hop on the mobile network if possible.. I'm not sure if you can register over WiFi with you being in a different country, but we can try a few steps.
    Register on Network
    1. From the device go to Options
    2. Select Advanced Options
    3. Select Host Routing Table
    4. Select menu, then 'Register Now'
    Send Service Books
    call your carrier and ask them to resend your service books.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • No icons on my desktop or the taskbar after 5 different delete/downloads

    after loading firefox onto my new dell 17r i noticed there were no icons either on my desktop or my start menue. i deleted it and tried again. 5 times. to no avail. what gives? ive never had this problem before?

    Third party fonts, non Apple font manager, duplicate fonts, can all cause the problems you describe.
    Help here >  Font problems and management in OS X | MacFixIt - CNET Reviews

Maybe you are looking for

  • How to achieve automated posted for invoice and stock transfers

    Hi, I have following queries for an RFP, can some one give hints on how to achieve them in SAP o Receive self-billing documents from the customer, stating the deliveries and amounts that are settled and paid o Automatic posting of invoice documents f

  • Import CLASSPATH in JSP

    Hi all, I am following a guide to install an JSP application on Tomcat. The third point is: Confirm JAR Files are Included in CLASSPATH Please ensure that the .jar files in the WEB-INF/lib/ directory of your web application are included in the CLASSP

  • Help needed to add an image to a datagrid cell in actionscript

    Morning all, I am still quite new to flex development and I have an application which uses xml to populate a datagrid. One of the row columns should display a small image but I don't know how to do that. Can anyone show me how to add an image to a da

  • KT4AV with mouse problems

    hello; for a week, I have been in mouse troubles in my computer, I try many mice, PS2 at soon bought a new USB/OPTIC mouse, but it cannot solve the problem. Problem is that mouse freezes sometimes or makes stupid movements, I scan my computer with di

  • Missing printing profiles

    i have a dell xps system with Vista operating system and Lightroom V1.3.1. Windows explorer list all my printer profiles however, in Lightroom under color management, profile, other, not all the profiles are shown. How do i get Lightroom to list all