Win 7 Zune to Airport Express

Hi everyone can you please help me with something? I'm having trouble with something, I've used Airport Express Streaming Music via iPhone 4 and MacBook Pro, so far it's been great but I have a question. I have Win 7 on my Dell and I wanna ask if my HTC WIN PHONE & Zune (Windows iTunes) can stream through Airport Express? Please help me...

Hello:
This is the link to available downloads:
http://support.apple.com/downloads/#airport%20express
Barry

Similar Messages

Is there a way to configure win 8 Laptop to airport express? I can see theN connection to the wireless network, but troubleshooter suggests there's t

Is there a way to configure win 8 Laptop to airport express? I can see the connection to the wireless network, but troubleshooter suggests there's there is no gateway and of course no internet. The connection
shows limited. Any help you could provide would be most appreciated. Further, should I simply buy another router for the windows machine? If I did that, would it interfere with the airport?

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Cant print from Win XP and Win 7 machines using Airport Express

I have two airport expresses each hooked to a printer. Both are ini ethernet mode only; wireless is turned off. With our two Macbooks, all works perfectly; it was foolproof to set-up and both macbooks can priunt to either printer at will.
We have a Win 7 laptop; oddly, it will only print to one of the two printers
We have a Win XP desktop, it wont print to either printer.
In boht cases on the windows machines, I can see the airport expresses and I can configure3 them using the utilty. I can install the printers using the Bonjour Printer Wizard. Bonjour itself is running on each machine....I can tell as itunes home sharing works perfectly and I can see it as a "Service".
But when I try to print a document, it just never comes out!
I have Geek Squad coming next week....by nice if I could fix it before they get here!

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Trouble connecting to internet on Win Vista machine through Airport Express

Hey all,
I have an Airport Express set up in my apartment and it works well. The problem is that my roommate, who has a laptop running Windows Vista, cannot connect to the internet. He can connect to our wireless network, and the signal strenghth is "excellent" but he cannot get an internet signal. I've tried running Airport Utility and it says an error occurred while trying to connect with the error code -6753.
I'm absolutely hopeless with Windows networking. Does anyone have any tips?

First thing is to contact your ISP and ask them for help. Simple issues could be: you need to restart the cable / dsl modem so it synchs to the AE; they may need to enter the actual MAC address of the router on the network (not as common now).

Win 98 laptop on airport express

Hi, i got a working aiport express here with a g4 on it, id like to add my win 98 laptop to it so it can have internet and filesharing
i use a asante aerolan pcmcia card. The card can connect to the network, but it never gives my laptop an IP. Im a bit unsure what im doing wrong.
it is using 64 bit WEP. the asante card gives me an option to enter a passphrase, and thats where ive been typing in the password that the g4 uses to get on the network.
I dont have the password to the base station itself, is that the password i need? if so, i need to reset my password on it then eh?
thanks for any insightful info.

it is using 64 bit WEP. the asante card gives me an
option to enter a passphrase, and thats where ive
been typing in the password that the g4 uses to get
on the network.
You can't use the passphrase you need to use the ten character HEX key.
Accessing a Airport Network with a Windows 98 PC or laptop
http://www.ifelix.co.uk/tech/1019.html
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
iFelix

Need Help in Adding Win XP PC to my Airport Express wireless Network.

If you don't mind me asking, i've been having this same issue for months now... i'm trying to connect my sister's win xp pc wirelessly to my airport express downstairs that connects wirelessly to my new g4 ibook (and works flawlessly) with an airport express card pre-installed. i purchased a cheap wireless card with an antenna on the back for my sister's pc and it says a network bridge was established but it won't go online. any suggestions??
i've been having this issue for 3 + months and this forum has been of no help yet.
thanks
B

http://www.ifelix.co.uk/tech/windowsxp.html

Connect to Win (wired) network from MacBook connecting via AirPort Express

Hi,
I have a MacBook (OS 10.4.10) that I was connecting to my Windows network via a Linksys WRK54G Wireless router (configured as a WAP), which in turn was connected to a Netgear FVS318 VPN Firewall Router. The FVS318 connects to my cable modem and 2 Windows XP Pro PCs. The Linksys WRK54G has been flaking out, so I replaced it with an Airport Express. My MacBook and a Windows XP Pro laptop are both able to connect to the internet via the airport express, and they are both able to ping the IP addresses of my (wired network connected) Win XP Pro PCs. However, the PCs no longer show up under "Network" on the MacBook, nor can I connect to the shared directories on the (wired) Windows PCs from the Win XP Pro laptop (via Start Menu => Run => enter IP address). I have not found any answers so far either using Google or Apple Support website. Surely this is possible -- what am I missing? Thanks.
- Scott

Hello sborisch. Welcome to the Apple Discussions!
If I understand your network configuration, you just need to configure the AirPort Express Base Station (AX) as a bridge...
To set up the AirPort Express Base Station (AX) as a bridge, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, using the AirPort Admin Utility (located in the \Applications\Utilities folder), make these settings:
Network tab
o Distribute IP addresses (unchecked)
o Apply the new setting.

Printing wirelessly via Airport Express w/ Win XP

Using Airport Express for internet connection and to print wirelessly. Had no problem setting up and connecting with my MacBook, iBook and Win XP computer. Installed Bonjour for Windows and set up printer, was able to print test page. However, every time I print something that is more than a few lines, my Win computer (only) loses network connection. Gains back connection fairly quickly but will not continue to print where left off.
When I installed the Bonjour for Windows, I remember reading something about unblocking certain ports if running firewall. I think that might be the problem but I am unable to find that information again.
Help?

Support Article regarding Bonjour and XP with firewall...
http://docs.info.apple.com/article.html?artnum=301514

Bonjour won't print to my Airport Express from my Win XP pc

I loaded Bonjour onto my Windows XP pc. The load went fine -- no error messages. I ran the 'add printer' routine, it found my HP 1210xi (which is connected to my Airport Express by USB) and showed a driver in the selection list to add. I added the printer. The setup looks fine. When I try to print a test page nothing happens, it finally errors out in Windows saying there was a problem printint the document. It also creates a mess that requires stopping/restarting Windows spooler to clean out the old print job.
I had previously loaded Bonjour onto this PC and printed just fine.
I am running XP SP2 with Windows Firewall. I tried with the firewall turned off and get the same problem. I can ping the Airport Express from the PC.
I have other Mac & Windows PCs running on this network and this is the only PC with this problem, but I do remember having the problem with a Dell about a year ago.
Sorry to be so long-winded, but I wanted to put as much data in this post as possible.

Try plugging your computer directly to the HP printer via USB and installing printer. Then disconnect and try Bobjour again. It worked for me. Although you may need to reinstall Bonjour again.

Can I connect an external hard drive to my Airport Express and share it to store files on between two machines via the usb port. The machines are a MacBook and a fairly new Win machine. Printers and Airplay as well as wifi work perfect.

Wondering about the above.

... I bought a hard drive at an Apple store because they told me I could hook it up through my Airport express.
Bzzt. Nope. Bring it back.
Read: http://support.apple.com/kb/HT2421
Question: What is an AirPort Express?
Answer: An AirPort Express is a Wi-Fi base station. Besides acting as an Internet access point, it has several specialized features which make it ideal for specific needs.
Printer - Act as a wireless interface for one printer connected to the USB port, making it available to your network
"Hook it up" - in the sense that a wireless device may be wirelessly "hooked up" to an Express - is a different matter; like "hooking up" with a friend.
Words mean things. Imprecise words mean imprecise things. That generally doesn't end well.
Apple ought to read this stuff once in a while.
John Galt wrote:
I thought you were asking about a USB hard disk attached to the Express. That won't work.
I thought right. That won't work. An Extreme or Time Capsule will.

Airport express win xp

Hello ,
my Laptop with Winp XP lost every 5 - 20 minutes the Wlan connection to my Airport express v 7.6.1 .
The iPhone 4 iOS 6 and the iMac 21 connection work's stable on wlan network , but my iPhone 5
hast everytime a very bad transferrate over AP express Wlan / WiFi .
Datarate over mobilnetwork is extremely much faster .
I hope there is some one to help me .

Hi,
Thanks for all the help! I worked out how to change the channel yesterday afternoon while Apple Discussions was down (the Windows laptop hadn't been recognising the AirPort Express for most of the day) - the channel was set to 'Auto', so I've no idea which one it was actually using (or maybe it was changing, and that was the problem...? I don't know...), but I set it to channel 1 to see what would happen. After I restarted the Windows laptop, it had no trouble finding the network at all. Excellent! I still don't know why it worked fine (mostly) for months and then started doing this - maybe something else started interfering with it... I'm keeping my fingers crossed that this has fixed it, but at least I know how to tweak the channel setting now if the problem happens again.
Probably not relevant now, but in answer to the questions... it's an open network, I must confess I have no idea what MAC address access control is, and I set it to 128-bit WEP (that is the encryption, yes...? I hope I'm not talking about something entirely different!)
Thanks loads for all the help - I'm hoping the change of channel has solved the problem for good, I'll see how it goes!

Can't communicate with Airport Express after WIN upgrade?

I upgraded to Windows7-64 from XP and my itunes will not communicate with my airport express. I get a green light on the unit and on AP Utility. Back on iTunes, on the multiple speaker drop down list, the name of my APEx device is displayed with a checkmark but there is a lock symbol over an exclamation mark in a triangle.. Please help.
Ron

Hello Anderron,
I'd suggest taking a look through the following article for a host of useful troubleshooting steps that can help get AirPlay working.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

Airport Express wont connect with iTunes Win XP

I have had two airport express devices to stream music from my XP machine through iTunes to two rooms in my house. My wireless network was unsecured so I wanted to secure it and then reconfigure all my devices. When I went to reconfigure the airport devices, I reset them, connected an internet cable to them, went through the Airport Utility routine, entered the right network name and password keys, and got the big green check mark at the end. The light on the Airport turned green, I unplugged the internet cable, it stayed green. Opened iTunes and saw my new device in the itunes window. But when I clicked on it, iTunes couldnt stream any music to it and finally gave up. Opening up airport utility it says it cant find any devices on the network even thought the light is green.
Any help please. I have spent all day trying to figure out what the deal is. I have been a user for multiple years and now cant even configure back to an unsecured network as before. I do run Msft Live One Care but the firewall doesnt seem to matter.
Thanks,

It seems the issue is with the ActionTec PK5000 modem/router. ActionTec confirms an issue with the units ability to stream music/media via wireless. No answer as to when this will be fixed.

Just got a new Airport Express to replace an old ond that dropped off a lot. Works great with various Apple and Androids but Win 8 computer sees the network but can't connect.

Just got a new Airport Express to replace an old one that dropped off all the time. The new one works with various Apple and Android devices but will not connect to Wen 8 computer. The computer sees the network but can't connect.

Hello lucky3480;
I don't know what else to do. I'm thinking of possibly returning the unit and purchasing a wireless internet card to install in the tower. Any help you can provide would be great. Even suggesting a good wireless card at this point
Well it looks like you're not having any luck at all with this AX set up but please don't give on it just yet, it's a good choice for extending your Network. Your on the right path, just going backwards and in the wrong direction. You'll learn a lot about stuff this way but may lead to other issues.
Before I continue, let me know if you have returned the AX or still need help. Here's a link to Apple's PDF about [Designing AirPort Networks|http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf] Click on it to open in Safari but then save it to your desktop. Now open it from your desktop and start reading Chapter 3, page 42.
Later...
Buzz

Airport Express fails to work with Win Vista

Ive got a 802.11 n airport express.
My girlfriend's laptop with windows vista becomes disconnected with internet every hour. However, It shows in the tool bar that the laptop is connecting to the internet, while the MSN messenger and IE browser fail to connect to internet. She has to disconnect from internet and reconnect. Then it works for a while, then fail again.
Meanwhile, my macbook pro, which is also linked the airport express, works properly. It never failed to connect to the internet.
Can anyone plz tell what is goin' on? How can I solve the problem?

when was the last time the express worked fine?
ok, so hardwired into the 6121, that computer works fine, right? try these exact steps esp the reset
unplug modem and leave off for 5 minutes, while you're waiting plug a eth cord from modem to the WAN (circle icon) port of the express
keep express unplugged and hold in reset button and don't let go
plug power back into express and only release reset when amber light flashes after 10-20s
give it a minute, hopefully you'll now see a green light on the express
fire up airport utility and proceed to 'create a new network' - you may see your device under 'other wifi devices' in the utility or you'll have to manually connect to it by clicking on the wifi icon in the OSX title bar and selecting the reset name of your express (something like express 342sdaf32)

Win 7 Zune to Airport Express

Similar Messages

Maybe you are looking for