Win 8.1 domain workstation. Block all access, except for a fews users/groups and domain controller information/date.

Hi!
Win 8.1 pro, domain workstation. How Block all access, except for a fews users/groups and domain controller information/date.
Nuance:
From domain AD is locked Workstation Firewall "Domain profile" edit.
Possible?
cenubit

Hi GirtsR,
I am not sure the command to use the SID to accomplish what you want to achieve, if you only know the SID, you could take use Powershell to find the related information, more information, please check:
Working with SIDs
And a similar thread for reference:
How to find user/group known only SID
More reference: Default local groups.
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Block All Websites except for a few

I have a Linksys WRT54G router. I just got my 7 and 9 year old kids a computer. I need to block all websites except for about 5 - 10 websites that my wife and I let them visit. I don't think I can do this with the WRT54G router, but does anyone know how I can do it.
Thanks,
Skooter Columbo

unfortunately, on wrt54g routers, you can only block and not allow websites.
and to block websites, you can only put up to 4 websites which is what you do not want to do. cause you said you need to block all websites except for 5-10 sites.

Cisco 5510 blocking all websites except a few

Hello:
I see many post about how to block a single website, but I want to do the opposite. I would like to block all website except for a handful of them. Does anyone have any example configs?

Hi,
Yes you should be able to:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
Of course, you will need to create some soft of regex that will deny all the websites such as *.com, but first of course permit the websites you want.
Another option will be using FQDN acls (Only supported on version 8.4.2 and higher) Here is the example.
https://supportforums.cisco.com/docs/DOC-17014
Cheers,
Mike

How to Set Up Content Blocker to Block All Sites Except Those That Are Listed?

How to Set Up Content Blocker to Block All Sites Except Those That Are Listed by Firefox?

One other item I thought I would pass along...
I noticed that the NVG589 gets terribly confused if a device behind it isn't setup properly first to be a static address.
Here's the behavior: Say you have a router of your own and you intend to give it one of the addresses from your static IP block. You decide to set it up first and don't make the changes initially in the 589 to force it to be a static IP of some kind-- whether in the private or the public block. You configure the router in this case with DHCP. Your router starts handing out addresses in its own IP range however your configured it.
But look what the 589 thinks is happening: it sees the DHCP client name associated with the same MAC address changing constantly. It makes entries for each different client name in its device list, sometimes aging out, sometimes not.
Now trying to save the private IP will result in a "missing data" error. Worse, trying to change things to a public static IP will result in similar messages about the IP being in the wrong range.
The same issue can also occur if the device was setup statically in the private range and you try to change it to a public static IP.
The only way to fix this:
1) If you intend to advertise the router on an IP from your static block, disconnect all devices from the router and the RG, except for the router you want to setup. Wait for the RG to see them as "offline" in the device list. Alternatively, if you intend to setup another device or server on a Static IP, make sure it is the only device connected to the RG.
2) Switch the IP allocation to "Public"
3) Renew the lease on the device
4) Go into the IP Allocation page and fix the IP to one of the public static IPs from your pool
5) Reconnect all devices.
Generally, the best practice is to setup each static IP device before connecting any others to the RG.

Sophos Endpoint security: Block all websites except one

I've been trying to find out how to block all websites except one, in an end user, by creating a policy in the Sophos Enterprise Console. I can see an option - Full web control but it requires an appliance. My question is, it is possible block all websites except one with Sophos? I appreciate if anybody knows, and can tell me how. I have downloaded the trial version of Sophos. If it's possible, I'll try Sophos ES for a year, for the end users and servers.
This topic first appeared in the Spiceworks Community

Team Folder in the past was managed by administrators. Administrator can create, edit, delete team folders. The team folder can be published to a group of users, including Active Directory group. It is very convenient to share files and folders with a group of users in the same team. As team groups bigger, it may not be convenient for administrator to manage all the team folders. So it makes sense for administrator to assign some users to be able to manage team folder that they own themselves. Role Manager It usually starts with the role manager by creating a role with Add/Edit/Delete permissions and assign it to users or Active Directory groups. Manage Team Folder The user who are in the private team folder role will be able to manage team folders without seeing all the team folders from everyone. Here is a YouTube Video about...

Block all URL except one or two in WRSV4400N

Hi,
I have a WRSV4400N router and I need to block all URL except one or two. Can I do it with or whitout TrendMicro ProtectLink??
Thank you

Hi Axondigital,
Your english is very good. I did say "check and see" in my earlier post and not here is a solution.
To answer your original question , the answer is NO.
URL filtering is a limitation you will find in a product like the WRVS4400N, but you will not find that limitation in the new and more powerful SA520 which has an URL allowed and blocked list.
My advice would be, evaluate trendmico protectlink if you wish and see what you think. send a email to the following address to get a evaluation license;
[email protected]
But try a SA500, if that customer really needs a low cost, but capable router that requires URL allowed list.
regards Dave

HT4796 I did all of the above and the migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don'

Migration Assit , PC to MAC - The migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don't have. What must I do to access my files?
My experience is with MS PC's I'm new with the MAC Book Pro.

Then, see if this works:
Mac OS X 10.6 Help- If you forget your administrator password
If you are running Lion or Mountain Lion you may need to do the following to access the same utility:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

I tried to download firefox, but the homepage is now all blank except for the browser bar at the top!? Normally the firefox logo would be on the homepage, along with the rest of the homepage designs. Whats wrong?

When I downloaded firefox, the firefox home page was all blank, except for the browser bar at the top of the page. Normally, the logo would be on the homepage, in the center. Also, the other designs along both sides of the page are missing! What is wrong? I've tried at least 8 times to reload firfox to see if maybe it didn't load properly, but the same blank homepage appears! Can you email me with an answer please!?!? Thanks! Sal Cannone.

What is the home page?
*Tools > Options > General > Startup: Home page
*https://support.mozilla.com/kb/How+to+set+the+home+page
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Access to business partners denied.User "so and so" is not a sales employee

Hi all,
I was trying to create a snapshot in outlook in a users computer but unfortunately the system displays a strange message:
Access to business partners denied.User "so and so" is not a sales employee
The user is a member of Sales Employees/Buyers-well what i mean is that the sales name is there but not user name ie Frank Blank is there but not FrankB for example.
Any ideas ?
Thank you,
MB

Hi Matthew,
Interesting message as we use the O/I ad-on... on the EMD record, go to the Membership tab and add 'Sales Employee' under "Role" to the EMD record. Shot in the dark but that's all I got.
HTH,
Heather

How can we provide access/provide permissions to a user/group for group of folders at single step??

Hi Nico, Thaks you so much for your reply,, Can you please advice or give me some steps to write script pelase? Regards,Kareem

Hi All, How can we provide access/provide permissions to a user/group for group of folders at single step?? I can able to provide access for a single folder at a time. I want provide access to a list of folders( more than 30 ..) at single step?? Regards,Kareem

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Website works in all browsers except for Internet Explorer

I purchased a template online and added our content. After uploading to our server I tested with FIrefox, Safari, Chrome and IE. It works exactly as expected in all browsers except for IE. I'm sure it is a grid issue, but I am a novice web designer and don't know how to fix it. In IE there is content from the "CONTACTS" section buried at the bottom of all other sections and half of the content of the "CAPABILITES" section is totally missing.
Modified website here
http://03694b2.netsolhost.com/#!/page_home
Original template here
http://03694b2.netsolhost.com/backup/site/index.html#!/page_home
Other than the grid problems, the drop down menu under ABOUT doesn't link to anything in IE.
Any help you can offer would be appreciated.

IE has become a serious problem generator while developing websites
The codes have to be well written and scripts have to mantain an order
Are you working on html5?
If so my suggestion is to contact the guys that you bought the template from and ask them to fix the problem
This is one of the big issues when you purschase templates online
My suggestion is that you take some time to learn to do them by yourself, its challenging but more fun and it gives a professional touch to your work
There are many sites to get inspiration from
Regards
Mike

How to set application access type for list of users

Hi everybody,
I've an requirement to automise the application access type setting in shared services.
When i searhed to do with MaxL scripts.I'm able to set the application access type for a single user using
alter user 'username' add application access type essbase
alter user 'username' add application access type planning
But,i've to perform this as a daily activity updating for list of users.Is there away to do it..??..i want to pass the list of users to the above alter user command.??
Please help me.
Cheers
Saran
Edited by: user11396937 on Aug 27, 2010 2:09 AM

I discovered that changing "Image interpolation" optioon in general preferences of Photoshop has direct influence on smart object interpolation type. You can even reinterpolate smart object after changing image interpolation in preference. Just click ctrl + t and enter.

HT203167 how do i authorize my computer to download all my music for the store menu? and where do i find the store menu?

how do i authorize my computer to download all my music for the store menu? and where do i find the store menu?

It should be at the top of your Mac's iTunes e.g.
And re-downloading : http://support.apple.com/kb/HT2519

Network user ID and Domain in HR infotypes

Hi,
I have an requirement to retrive network user id and domain based on SAP user id from HR infotypes. Does anyone knows in which infotype can i find these fields.
Regards
Hema

Hi Hema,
1.
Infotype :0105.
Database table for that IT :PA0105.
2.
Write Select query like this .
SELECT pernr
from PA0105
into l_pernr
where subty = '0001'
and usrid = SAP user ID
and begda le sy-datum
and endda ge sy-datum.
SELECT usrid
from PA0105
into l_usrid
where Pernr = l_pernr
and subty = '9NWI'
and begda le sy-datum
and endda ge sy-datum.
I hope that u will do it .
Thanks,
Venkat.O

Win 8.1 domain workstation. Block all access, except for a fews users/groups and domain controller information/date.

Similar Messages

Maybe you are looking for