WIN 8 drivers not for my new HP 4635 office jet not on my HP Smarttouch 14 " notebook

Unable to get my printer to accept wireless print commands from my HP Smarttouch 14" notebook.

Hi gslide47,
I understand that you cannot print when on a wireless setup. I will try my best to help you resolve this issue. To better guide you, could you please tell me what operating system you are running on your computer and what error messages are getting when you try to print?
In this document for Printer Does Not Maintain Wireless Connection are steps that address most of the wireless issues.
I hope this information helps, please let me know how it goes.
Thank you,
I worked on behalf of HP.

Similar Messages

  • For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream?  There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?

    For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream?  There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?

    Now I also know about pulling the message to the left to see the time stamp.  Good to know, although I preferred it being right where I could see it without having to do a swipe or keystroke. 

  • Just got a new MacMini.  Migrated files using Time Machine.  However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one.  How do I get rid of these updates?  They won't delete!

    Just got a new MacMini.  Migrated files using Time Machine.  However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one.  How do I get rid of these updates?  They won't delete!

    Only thing I can think of is trying this Lion trick...
    http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/

  • Are there release notes for the new Flex Ajax Bridge?

    Are there release notes for the new Flex Ajax Bridge?

    Hello,
    You can find the release notes
    here
    . The wiki page has been updated as well to point to the release
    notes document, in the Where can I find out more section.
    Thanks for noticing they were missing,
    Cristian

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • My iPad mb292ll version 5.0.1 ( the original) will not AirPrint to my HP 8500a office jet but me wife's same generation iPad will.  Any suggestions?

    My iPad mb292ll version 5.0.1 will not AirPrint to my HP 8500a office jet , but my wife's same generation iPad will.  Any suggestions?

    RLBAUER-
    1.  It is possible you have a print job stuck in the print queue.  Double-click the Home button, and a row of recent Apps will line up along the bottom of the screen.  Scroll across and look for the Print Center.  If you find it, you should be able to clear it.
    2.  A bit more far-fetched, but I wonder if your iPad might have jumped to a neighbor's WiFi?  I have had this happen when the neighbor's WiFi SSID was the same as mine.  It showed up when I tried to print.  There are a LOT of WiFis out there named Linksys!
    Fred

  • How can I print from my Samsung Galaxy note 8.0 to my HP office jet 6500 a e710n.

    How can I print from my Samsung Galaxy note 8.0 to my HP office jet 6500 a e710n.  I live in the courty and do not have a router and I am using a desktop computer with a Wireless USB Adapter SMCWUSB-N2 installed.

    Hi raraock,
    I would like to help you with this issue. What are you trying to print from your Samsung Galaxy Note tablet?
    I worked on behalf of HP.

  • Are drivers same for old & new ISA GPIB cards

    Hi,
    I have some 5 YEAR old AT-GPIB ISA type cards (have copyright 1995 written on them). They are installed & work fine on NT. I don't have the installation disks for the original drivers. To get these cards working on win 2000, exactly which driver(s) do I need & where can I get them - there seems to be a few versions of similar GPIB drivers on the NI website, all with different installation guidelines.
    Also, if I buy NEW ISA card (as a backup for the 5 year old cards) will any drivers installed for these old cards work with the new card? (I would hope to avoid the installion of new drivers if the card must be replaced in future). My limited reading on ni.com suggests that my old cards need driver NI-488.2 for Windows, revision 1.7, while I;m concerned that any new cards would demand install newer drivers.
    Any assistance would be much appreciated.
    All the best,
    Martin

    Hi Martin,
    Thanks for your post regarding which driver you should install to get your AT-GPIB card working on Windows 2000. The best driver for you to use would be NI-488.2 version 2.3. You can download this from the following link. This is the latest version of the driver but still supports the AT-GPIB card.
    http://digital.ni.com/softlib.nsf/websearch/74B5B3FF1122C90F86256F4F00781783?opendocument&node=132060_US
    With regards to your query about new ISA cards, we no longer sell ISA cards and therefore if you were to buy a backup for your cards you would have to either go for PCI, PXI, USB or PCMCIA as your bus type. For the newest products you are correct that you would have to have the latest drivers installed, at the moment you would be OK as the latest GPIB driver still supports your existing cards, but sometime in the future we will probably bring out new cards that require another version of the driver, and that version may not support your existing cards.
    Hope this helps,
    Best regards,
    Peter H
    Applications Engineer
    NIUK.

  • KE5Z : UserExit or SAP Note for adding new fields in the report output

    Hi,
    I want to add 2 new fields in KE5Z (Profit Center: Actual Line Items) report output.
    Order reason(AUGRU), Sales Document Type (AUART) fields.
    Is there any UserExit or SAP Note available for this....
    Thanks in advance,
    fractal

    Hi Fractal,
    See if Note 92864 will help you.
    Summary
    Symptom
    Through a modification, it is possible for you to include additional fields in the profit center line-item reports 'actual' and 'plan' (Release 3.1*).
    Additional key words
    KE5Z, KE5Y, RCOPCA02, RCOPCA08 -
    SUPPORTGUIDE 20010613143936 -
    REPORTWRITER,
    SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
    Cause and prerequisites
    The fields must be located in table GLPCA (for actual) or GLPCP (for plan).
    For Release 3.0F, you should ensure you have applied Note 62511 first.
    Solution
    To include a field in the actual line item report, proceed as follows:
    Call the ABAP/4 Dictionary (Transaction SE11) and display table GLPCA. You can then find in a line the field name and data element for the field you want to include.
    Return to the initial screen of the ABAP/4 Dictionary. Now change the structure RPCA2. If the structure does not yet contain the field, you select Edit -> Insert field; enter the field name and data element. Do not insert the new field at the beginning of the structure but in the rear half of the structure.
    Then save and activate the structure.
    Now call the ABAP Editor (Transaction SE38). Change the source code of program RCOPCA02. Insert the lines set out in the attachment in FORM routine FIELDCAT_FILL. When you do this, replace SGTXT by the field name of the field. If you normally want the field to be displayed when you the access the report, delete the line   afield-no_out      = 'X'.                "<<<< insert Note 92864 .
    You should note that the place where you insert the lines influences the position of the column in the report list.
    To include a field in the Plan-line-item report, carry out the same procedure except with table GLPCP, structure RPCA8 and program RCOPCA08.
    Note: Pls check if these 2 fields are available in any of the layout versions you have available with the transaction.
    Cheers,
    Vikram
    Pls reward for helpful replies!!

  • Why my app not work in new version, Why my app not work in new version

    I just update to new version software ios6.0 for my iPad, but I found that few of my apps downloaded before are not working now, how can I do now?

    Lily yu wrote:
    Why my app not work in new version
    Ummm..I think that's obvious...the developer hasn't updated them to work with iOS 6

  • My new ipad3 will not communicate and run my HP office jet 8500g printer wirelessly.  My daughter's Mac will wirelessly so my iPad 3 should right?

    OK, bought my 1st Apple anything last week.....(iPad 3)!!  Tried to send a "OnSong" doc to my wireless HP Office Jet Pro 8500g today and iPad 3 can,t find the printer.  My daughter used her Mac wireless and sent a "Pages" doc wirelessly with no problem.  Apple support confirms that they are compatible but want to charge me $99 for a 1 year subscription right out of the gate.  I don't know if the issue is iPad 3 or HP printer?  Seems like my iPad is the issue since Mac has no problem?  Any ideas on what the problem is?

    The simple answer is your printer is not Airprint Enabled, thus you can not print to it natively on your iPad.  There are options.
    1.  Purchase a new Airprint enable printer
    2.  Purchase an App from the App Store for about $9 that will permit printing.  Print Central and Printopia are two you could consider.

  • I recently purchased a new computer and tried to move my itunes music to the new PC, I am not savay on computers, but music will not play on new PC, error (!) will not play and have to locate.  Why is this please help.

    please help, someone that doesn't have the savay on moving music from an old pc to a new pc.  Music will not play message comes up and have to search. also purchased music from iPhone and does not show on my music library on PC.  This is very frustrating.  Thank you

    It all depends on exactly how you move the library from one machine to the other. The database holding information about your library is normally in a folder called iTunes, with the media in a subfolder called iTunes Media. In this layout you can usually copy the entire iTunes folder from one machine to the other and it will work. If the media folder is split to a new location however then often the links to tracks will fail on a new computer.
    You shoud find that the FindTracks script is able to repair the links in your library.
    I'm not sure I know what is going on with the purchased music, however if you enable Edit > Preferences > Store > Automatic Downloads > Music you should be able to recover your past store purchases.
    tt2

  • HT1349 I DO NOT HAVE A NEW COMPUTER..IT IS NOT AN APPLE...IT WAS CLEANED.. MY MUSIC IS THERE IT IS TELLING ME I HAVE TO REGISTER IT TO HEAR IT AND USE IT ???

    Please i'm looking at all my music that I have bought and saved..  However it wont play because it is saying it is not registered on this computer.  I did not get a new computer..  however I did get my computer CLEANED... that is all... I lost some pictures..  but I did not lose my Music..  I just got back on ITUNES.. and checked my credit card info.   Now I see my music..  I bought two songs tonight,  maybe three...  I was glad to see all my Music.. but now I need to be able to play and hear my music... and burn to a cd..   HOW DO I DO THIS....WHAT IS THE PROBLEM... I'M ON THE SAME COMPUTER, AND I'M THE SAME PERSON....  Bridget N. Kulesa   <edited by host>

    Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
    Go to a friend, authorize that pc.
    Read this : http://support.apple.com/kb/ht1848
    and this : http://support.apple.com/kb/ht2519
    Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically.

  • Iphone 3g will not see my new apple id so will not sync with cloud

    I changed my apple id because i no longer had access to the old email address - what a mess! I finally got the ipad to recognize the new id but the iphone automatically sees the old id and will not "take" the new one.  I went to the apple store and signed out of the old id and and into the new but it still sees the old id whenever I try to back up to the cloud
    Please help me I am losing my mind.

    Disregard - someone much smarter than I showed me to delete the account and then replace it wiht the new one.  Thanks to him I'm all set

  • My iPad will not print to my wireless hp office jet 6600 anymore

    MY iPad will no longer print to my wireless hp office jet 6600 printer

    Hi Everyone,
    Don't spend too much time trying to figure this out.  Apple has total control of what apple products can do.  Since the upgrade to IOS my 6600 HP printer no longer is recognized by my Ipad.  Just to add insult to injury my Iphone's wifi is now greyed out and I can no longer use wifi.
    I didn't see this coming but think about how apple can force you to upgrade to other products by simply limiting a device's capability through an operating system upgrade.
    I made an appointment with an Apple genius today and they said "Sorry this is a hardware issue (Iphone) and you will need to upgrade."  Of course I will, a $700 phone or Ipad should only last a couple of years... right?
    I am not upset but I will be more critical in my future purchases of Apple products.

Maybe you are looking for