Win7 Offline Files sync error after upgrade to Lion Server 10.7.2

Symptom: client is a Win7 laptop, the server is Mac OS X 10.7.3 Lion Server with SMB and AFP shares. Win7 Offline Files stopped working after I upgraded Snow Leopard (non-server version) to Lion Server 10.7.2. After updating to 10.7.3, the problem persists. When syncing, it gives thounsands of error like this: The process cannot access the file because it is being used by another process. WinXP clients are fine with the Offline Files function though.
I Googled and studied online for several days now and it might be related to the "Oppurtunistic Locking", or "Oplocks" for short, in the SMB protocol. Since Apple has re-written Samba, there's no "smb.conf" anymore to change the Oplocks setting. Maybe it's possible to change the setting in "com.apple.smb.server.plist"?
From the Internet:
1. Oplocks should be DISABLED on the server if there is any other file sharing protocol (AFP, etc.) other than SMB.
2. Offline Files will NOT work properly if Oplocks is disabled on the server side.
3. It was possible to config oplocks setting in smb.conf in Mac OS X versions prior to Lion but now there's no such config file.
My Question:
1. Does anyone else have similar problems?
2. Is it related to the Oppurtunistic Locking thing?
3. Is Oppurtunistic Locking enabled or disabled in Lion Server by default?
4. If it's related to Oplocks, how can I change the setting on the server?
5. I've noticed that the authentication from Windows PCs to the SMB share on the Lion Server is much slower then in SL. Could this somehow be related to my problem?
Thanks for your time! :-D

Any luck getting the info on SMBX parameters like OPLOCKS ? This is apparently causing an issue with Autodesk Revit. I am resorting to installing SMBUP.
There is an article that describes this method for altering the Lion smbd configuration parameters for honoring ACLs:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.smb.server AclsEnabled -bool NO
from this article
http://support.apple.com/kb/TS4149
and this:
http://www.stanford.edu/group/macosxsig/blog/2011/08/enable-logging-with-107-smb x-w.html

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

2008 R2/ Win7 Offline Files Sync causing High Load on server

Hi Everyone,
I have recently been investigating extremely high CPU Usage from the System Process on my company's main File Cluster.
We managed to track SRV2.sys Threads causing high CPU load within the system process, but was having issues identifying why this was the case.
As per Microsoft's direction via support call, we have installed the latest SRV2.sys Hotfixes, but this does not appear to have allivated the issue we are experiencing. We have also added more CPU and Memory into both nodes, which has not helped either.
We have since managed to create a system dump and is being sent to MS Support for analysis.
I have noticed the following that appears to happen on our cluster:
Whenever our CAD/Design department run certain functions within their apps running on a windows 7 client (apps include MicroStation, Revit, AutoCAD etc) we see a massive spike and flatline of the system process.
We found several users with Windows 7 clients that have Configured Offline File to sync an entire Network Volume (some volumes are 2TB Plus, so would never fit on a users computer anyway, i was quite shocked when I found this). How we spotted this was through
Resource Monitor, the System Process was trolling through all the folders and files in a given volume (it was "reading every single folder). Now, while this was the system process, we could identify the user by using the Open Files view in Server Manager's
Share and Storage Management tool.
I have done a fair bit of research and found that a lot of CAD/Drawing applications in the market have issues with using SMB2 (srv2.sys). When reviewing the products that we use, I noticed that a lot of these products actually recommended disabling SMB2
and reverting to SMB1 on File Server and/or the clients.
I have gone down the path of disabling SMB2 on all Windows 7 clients that have these CAD Applications installed to assist with lowering the load (our other options are to potentially shift the CAD Volumes off our main file cluster to further isolation these
performance issues we have been experiencing.) We will be testing this again tomorrow to confirm that the issue is resolved when mass amounts of CAD users access data on these volumes via their CAD Application.
We only noticed the issue with Offline Files today with trying to sync an ENTIRE Volume. My questions are:
Should Offline File sync's really cause this much load on a File Server?
Would the the size of the volume the sync is trying to complete create this additional load within the system process?
What is the industry considered "Best Practice" regarding Offline Files setup for Volumes which could have up to 1000+ users attached? (My personal opinion is that Offline Files should only be sync of user "Personal/Home" Folders
as they users themselves have a 1 to 1 relationship with this data.)
Is there an easier way to identify what users have Offline Files enabled and "actually being used" (from my understanding, Sync Center and Offline Files are enabled by default, but you obviously have to add the folders/drives you wish to sync)?
If I disable the ability for Offline Files on the volumes, what will the user experience be when/if they try to sync their offline files config after this has been disabled on the volume?
Hoping for some guidance regarding this setup with Offline Files.
Thanks in Advance!
Simon

Hi Everyone,
Just thought I would give an update on this.
While we're still deploying http://support.microsoft.com/kb/2733363/en-us to
the remainder of our Windows 7 SP1 fleet, according to some Network Traces and XPerf that were sent to MS Support, it looks as though the issu with the Offline Files is now resolved.
However, we are still having some issues with High CPU with the System Process in particular. Upon review of the traces, they have found a lot of ABE related traffic, leading them to believe that the issue may also be caused by ABE Access on our File Cluster.
We already have the required hotfix for ABE on 2008 R2 installed (please see
http://support.microsoft.com/kb/2732618/en-us), although we have it set to a certain value that MS believe may be too high. Our current value is set to "5", as that is the lowest level of any type of permission is set (i.e. where the lowest level of inheritance
is broken).
I think I will mark this as resolved regarding the Offline Files issue (as it did resolve the problem with the Offline Files)...
Fingers crossed we can identify the rest of the high load within the System Process!!!

File sync error after renaming jpg file on desktop

I changed the file name of a photo in my desktop backup of my Treo 755p photos from the default format of Photo_[date]_xyz.jpg to Matisse by fire2_101208.jpg.
The path is:
C:\Program Files\Palm\[username]\Photos\offline copy location\7dba\Palm on Card\Matisse by fire2_101208.jpg
Now I get the following error after hotsync.
Unable to sync media file 'Matisse by fire2_101208.jpg' on desktop. Error code: 32.
OK Media with 1 message(s)
I also changed two others to
Matisse by fire1_101208.jpg and
Matisse by fire3_101208.jpg
but am not getting errors on those.
I can open the file specified so I don't think it is corrupted.
I'm using Hotsync 6.0.1.
I could not find error 32 anywhere. Is ther a list of all the Hotsync errors somewhere?
Any ideas?
Thanks,
Don
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)

as far as i understood the explanation, you renamed the picture manually by going into the path that you stated in your post right?
when your rename the file, have you check if it did show the file extensions?
try to reveal the file extensions by going back to the location (folder). click on tools>folder options>view>uncheck hide extensions for known file types.
then click ok. try to see on what's the difference in the 3 files you mentioned. i suspect that the erring file has 2 jpeg extensions on it.
Post relates to: Treo 680 (Unlocked GSM)

Sender File adapter - Error after upgrade to SP16 !!

Hi ,
After upgrade from SP14 to SP16 , i see this error in Adapter monitor in rwb. The file does not get picked up. Any ideas on how to troubleshoot this ?
Configured at 2006-04-20 06:50:27 GMT
History:
- 2006-04-20 09:55:00 GMT: Retry interval started. Length: 30.000 s
- 2006-04-20 09:55:00 GMT: Error: BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
- 2006-04-20 09:55:00 GMT: Processing started
- 2006-04-20 09:54:36 GMT: Error: BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
- 2006-04-20 09:54:33 GMT: Processing started
Is there a patch that will fix this issue ?
Regards
matthias isenburg

thanks for yours tipps...
here the output of the defaultTrace.trc:
[EXCEPTION]
com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0.process(ModuleLocalLocalObjectImpl0.java:118)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java(Compiled Code))
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java(Compiled Code))
     at com.sap.aii.adapter.file.File2XI.send(File2XI.java(Compiled Code))
     at com.sap.aii.adapter.file.File2XI.processFtpList(File2XI.java(Compiled Code))
     at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java(Compiled Code))
     at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: javax.xml.transform.TransformerFactoryConfigurationError: Provider com.sap.engine.lib.jaxp.TransformerFactoryImpl not found
     at javax.xml.transform.TransformerFactory.newInstance(Unknown Source)
     at com.euh.FileModule.GetFileNameBean.process(GetFileNameBean.java:76)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0.process(ModuleLocalLocalObjectImpl0.java:103)
     ... 11 more
Error during processing local bean localejbs/sap.com/com.euh.FileModule/GetFileNameBean
Module Exception 'com.sap.aii.af.mp.processor.ModuleProcessorException: Processing Error caused by: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.' found, cause: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Channel Orders_ftp_sender: Sending file failed with com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback. - continue processing
Should this traces give me more information?
mfg,
matthias

File Upload error after upgrade to 1.6

After upgrade to HTML version 1.6 from 1.5 it's impossible to upload files to the Database.
The same effect apears during application import or when i try to uploaad an file inside of an application.
Does anyone know this? How to solve it?
Thanks
Thorsten

Scott said:
"You should probably revoke those grants, unless the user was HTMLDB_PUBLIC_USER. The DAD user should always be HTMLDB_PUBLIC_USER, unless you are using a dedicated DAD for database authentication, in which case that DAD should use a private document table. HTMLDB_PUBLIC_USER should already have access to the wwv_flow_file_objects$ unless something went wrong during installation."
I am facing a very similar problem since we upgraded to 1.6. File uploads do not work unless privileges on wwv_flow_file_objects$ are granted to the user (we use database authentication). By default, NO users or roles have access to this table. Does this mean that something went wrong during installation?
I am confused by this: "...unless you are using a dedicated DAD for database authentication, in which case that DAD should use a private document table." Does that mean that whenever database authentication is used, wwv_flow_file_objects$ is no longer the repository for uploaded files? How should it work then?

Syncing Error after upgrading to iOS4

After my 3GS backs up for what seems like forever, I get "Syncing Error (-50). It seems to sync everything correctly except for my photographs. Nothing appears except "Camera Roll". I've had my iphone for a year and never had any issues until the iOS4

Delete the photo cache as described here:
http://support.apple.com/kb/TS1314

Can't add files to HD after upgrading to Lion

hi,
i just upgraded to lion and now i can't drag and drop files from my desktop onto my macintosh HD icon. i get the error popup window "The item (filename) can't be moved because "Macintosh HD" can't be modified" then I need to click on the "Authenticate" button on the popup window, type in my password for the system and then it will add it to my mac hd.
i'm sure i just have something locked or set wrong, but i've never gotten this error before.
does anyone know what i need to change or do so i don't have to authenticate each time i want to drag/drop something onto my HD?
thanks

thanks for your reply, after running repair permissions several times (which was a good idea because several were corrupt) but did no good for this issue, i went to look at the permissions for the hd and everything looked good, system had read/write anyone else had read only. i added myself (my computer administrator name) with read/write permission and now everything works as it should

ICal Caldav errors after upgrade to Lion

Dear all,
I had a perfect working setup (MacBook Air) with Snow Leopard, iCal accessing my agenda via caldav to zimbra mailserver.
Upgraded to Lion (10.7.2) and since then iCal does not sync correctly anymore:
1. events created on my mba do not end up on the server
2. event invites by other people or events created via the zimbra webinterfaces do not always end up in iCal
I've deleted and (re)created the account multiple times, erased caching and other directories in between, no change.
Configured the same account on a colleague's mac book pro also with Lion upgrade, everything working fine....
Error I get from iCal (Version 5.0.1 (1547.4))
The request (CalDAVAccountRefreshQueueableOperation) for account "webmail.mydomain.com" failed.
From syslog:
Nov 17 12:07:36 My-Name-MacBook-Air iCal[461]: Account refresh failed with error: Error Domain=CoreDAVErrorDomain Code=3 "The operation couldn't be completed. (CoreDAVErrorDomain error 3.)" UserInfo=0x7f99edd356c0 {AccountName=webmail.mydomain.com, CalDAVErrFromRefresh=YES}
From console log:13/12/11 21:05:27,212 iCal: CoreData: error: (1) I/O error for database at /Users/stevenkrekels/Library/Calendars/Calendar Cache. SQLite error code:1, 'Expression tree is too large (maximum depth 1000)'
13/12/11 21:05:27,238 iCal: *** -[CalManagedObjectContext executeFetchRequest:error:]: error: Error Domain=NSCocoaErrorDomain Code=256 "The file “Calendar Cache” couldn’t be opened." UserInfo=0x7fe1b6080f60 {NSFilePath=/Users/stevenkrekels/Library/Calendars/Calendar Cache, NSSQLiteErrorDomain=1, NSUnderlyingException=I/O error for database at /Users/stevenkrekels/Library/Calendars/Calendar Cache. SQLite error code:1, 'Expression tree is too large (maximum depth 1000)'} {
    NSFilePath = "/Users/stevenkrekels/Library/Calendars/Calendar Cache";
    NSSQLiteErrorDomain = 1;
    NSUnderlyingException = "I/O error for database at /Users/stevenkrekels/Library/Calendars/Calendar Cache. SQLite error code:1, 'Expression tree is too large (maximum depth 1000)'";

I forgot to mention that any help would be much appreciated

Airport Extreme giving errors after upgrading to ML Server

With OS X Server, your machine sees your Airport Extreme and can then configure it by opening ports, etc. once you turn on services. I upgraded from OS X Lion Server to ML Server and everything was fine for a second. Now whenever I click on the Extreme in the panel, I get the following error:
The error occurred while processing a command of type 'getIGDPortmaps' in plug-in 'servermgr_network'.
In Console, this error pops up:
7/26/12 9:01:12.036 PM Server[4546]: Error: The server '10.0.1.250' reported an error while processing a command of type: 'getIGDPortmaps' in plug-in: 'servermgr_network'. Error: Error Domain=com.apple.Keychain Code=-25300 "The operation couldn’t be completed. (com.apple.Keychain error -25300.)"
I've got in and deleted all the keychain passwords having to do with the Basestation and I still get the same error. Right now, I put Ser

I don't know if this will help but here's what happened today.
While I was out of the house, I wanted to see if the VPN connection was still active and working on my phone. It told me that it couldn't log in so no big deal. I figured I'd check it when I got home.
I got home and checked the Server settings for VPN and sure enough, it was off. I turned the VPN setting to ON and let it write its information. I then went to the AEBS tab on the left pane and it asked me for the password. Once I put in the password for the AEBS, it worked just fine.
So far what I've done was erase any Keychain passwords related to the AEBS and turned on VPN service to get it working. Don't know if that'll work for everyone else but hopefully it does. Seems it's a tiny bug that should be stomped out rather quickly as it's a huge piece of OS X Server.

TS3960 After upgrading to Lion server 10.7.4, Server.app does not start.

I upgraded from 10.6.8 Server. The Mac OS 10.7.4 starts fine, but when attempting to launch 'Server' (which does appear in the launchpad) nothing happens (the application does not start).
I checked for this:
sh-3.2# sudo launchctl list | grep -q com.apple.servermgrd && echo loaded || echo not loaded
loaded
Thank you in advance for any help on this front. AV

I got solution.After I reset the Server.App i could able to login the Server.App.
For reference : http://krypted.com/mac-os-x-server/hosed-your-mountain-lion-server-reset-it/

Anyone use CS3 with Win7 offline file syncing?

I just recently upgraded to the 64-bit version of Windows 7. It has a feature that allows you to cache network files to your hard drive for working on when you are disconnected or have a slow connection with the network (Sync Center) and can be convienient for people like me who telecommute. Most applications seem to work with this, but I've found when trying to save a file from Photoshop CS3 onto this shared drive when its in offline mode results in an error saying the file name was not valid (the file name is valid and can be saved to my harddrive normally). Likewise when I try to save a file to this shared drive in offline mode in InDesign it says that it can't save "under a new name".
Anyone else having this issue or know how to resolve it short of not using the Sync function in Windows?

I am suddenly getting that same message. "The file name is not valid" - and up until a few minutes ago, it was a valid name.
But I am using Reader X and Windows 7

IPod Sync Error after Upgrading to iTunes 10 and ios5

Some help please,
I've upgraded to iTunes 10 and installed ios5 on to my iPod Touch and I cant now sync as iTunes reports that the backup is corrupted or not compatable with the iPod
Thanks
Kris

Dear Mr. Sawyer,
To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
Thanks for your response and concern.
Regards
Amit Samel

Error after upgrading to Weblogic Server 4.5.1

Hi,
We upgraded Weblogic server version 4.0.3 to version 4.5.1 service pack
18. Since after the upgrade, when I try to check the version installed,
I get the error message that T3 admin. is not found. I can't even use
java utils to check my version. I have tried redoing the class path and
shared library path, but nothing works. Can please somebody help me? We
are using Solaris 2.7 operating system and JDK version 1.1.8_12.
Thanks.

Hi Robert,
Thanks for the suggestion. I reinstalled 4.5.1 from the CD and everything works. I haven't installed the
service patch 13 yet. My next question from you is: Do I need to make changes to the application to use it
on WLS 4.5.1. This application was written around 4.0.3 and JDK 1.1.6. I have also upgraded the JDK to
version "Solaris_JDK_1.1.7_08a".
Following is the error I receive in the log file:
com.leretanet.common.hi.LoginServlet init parameters:
Loading com/leretanet/common/leretanet.properties
Unable to load properties file 'com/leretanet/common/leretanet.properties'.
File 'com/leretanet/common/leretanet.properties' not found on classpath.
Mon Jan 08 20:48:36 PST 2001:<E> <ServletContext-Servlets> Servlet failed with RuntimeException
Mon Jan 08 20:48:36 PST 2001:<E> <ServletContext-Servlets> java.lang.NullPointerException
Attached is the startup batch script that we are using to start weblogic services.Application classes are
under the /work/weblogic/classes directory. Logically, it should find everything. Application does display
the Login page. It dies after I enter userId and password.
Any input? Since you were so helpful last time, I thought I'll try my luck.
Thanks.
Zahida
Robert Patrick wrote:
It sounds like your installation has been corrupted. I just sent you email with the classes from this
directory -- if this doesn't work, you should probably re-download and re-install...
Hope this helps,
Robert
Zahid aSharief wrote:
Hi Robert,
Thanks for being so helpful. You have helped me more than the BEA tech support. I've been going in
circle with them and not being able to find any answers. Well, the InitialReferenceConstants.class
is part of NT install. I do have an NT development server, when I did the search on that class I
found it in rmi/entention directory. I don't see it in Unix classes. Although, I downloaded the
upgrade from BEA's website, may be I used the wrong download?
Just for testing purpose, I copied that class file from my NT server to the Unix server and when I
did the version check I got the ClassDef error on another Class. I kept copying the class files
that it was not finding on my Unix server from my NT server. I'm down to a file that does not
exist in NT. Here's the error:
java.lang.NoClassDefFoundError: weblogic/rmi/extensions/BasicRemoteObjectReference
at weblogic.rjvm.Kernel.declareProperties(Compiled Code)
at weblogic.rjvm.Kernel.ensureInitialized(Compiled Code)
at weblogic.common.T3Client.<init>(Compiled Code)
at weblogic.common.T3Client.<init>(Compiled Code)
at weblogic.common.T3Client.<init>(Compiled Code)
at weblogic.Admin.connect(Compiled Code)
at weblogic.Admin.main(Compiled Code)
Now what do I do?
Thanks again.
Zahida.
Robert Patrick wrote:
Make sure that your classpath is set properly...
D:\>dir weblogic451\classes\weblogic\rmi\extensions\InitialReferenceConstants.class
Volume in drive D has no label.
Volume Serial Number is 501A-BD5F
Directory of D:\weblogic451\classes\weblogic\rmi\extensions
09/30/99 05:48p 553 InitialReferenceConstants.class
1 File(s) 553 bytes
1,465,065,472 bytes free
D:\>
Zahid aSharief wrote:
Hi Robert,
Thanks for your help. I tried changing the classpath. Now I get the following error message:
java.lang.NoClassDefFoundError: weblogic/rmi/extensions/InitialReferenceConstants
at weblogic.Admin.connect(Compiled Code)
at weblogic.Admin.main(Compiled Code)
What else am I missing?
Thanks again.
Robert Patrick wrote:
WL_HOME=/opt/weblogic; export WL_HOME
CLASSPATH=$WL_HOME/lib/weblogic451sp13.jar:$WL_HOME/classes:$WL_HOME/lib/weblogicaux.jar;
export CLASSPATH
java weblogic.Admin t3://localhost:7001 VERSION
Hope this helps,
Robert
Zahid aSharief wrote:
Hi,
We upgraded Weblogic server version 4.0.3 to version 4.5.1 service pack
18. Since after the upgrade, when I try to check the version installed,
I get the error message that T3 admin. is not found. I can't even use
java utils to check my version. I have tried redoing the class path and
shared library path, but nothing works. Can please somebody help me? We
are using Solaris 2.7 operating system and JDK version 1.1.8_12.
Thanks.

My iTunes doesn't open at all. Shows me an error after upgrading to Lion.

After installing OS X Lion I tried to open my iTunes and an error popped out. It said that library could not be loaded.
I waited for an iTunes 10.5 upgrade and installed it. But it still won't work!!
Help me please.
Here is the error that it shows:
Process:         iTunes [999]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.5 (10.5)
Build Info:      iTunes-10509941~1
Code Type:       X86-64 (Native)
Parent Process: launchd [127]
Date/Time:       2011-10-14 13:12:14.323 +0200
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: 452C0830-9F06-4EE4-9FC1-37CD367ADD43
Interval Since Last Report:          22887 sec
Crashes Since Last Report:           3
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      1AB61C15-0083-4B8F-88F3-54182B8F9D66
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
       0x109562000 -        0x10a5b7fef com.apple.iTunes (10.5 - 10.5) <235339DF-5CF1-9743-9725-502B860CCE3A> /Applications/iTunes.app/Contents/MacOS/iTunes
    0x7fff69162000 -     0x7fff691971ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBookAir3,1, BootROM MBA31.0061.B01, 2 processors, Intel Core 2 Duo, 1.4 GHz, 2 GB, SMC 1.67f3
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR3, 1067 MHz, 0x02FE, 0x45424A3130554538454655302D41452D4620
Memory Module: BANK 1/DIMM0, 1 GB, DDR3, 1067 MHz, 0x02FE, 0x45424A3130554538454655302D41452D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD1), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en0
Serial ATA Device: APPLE SSD TS128C, 121,33 GB
USB Device: FaceTime Camera (Built-in), apple_vendor_id, 0x850a, 0x24600000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0243, 0x04300000 / 3
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x04500000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821b, 0x04530000 / 4

Had the same problem with the new update. I finally got back to my previous version by using system restore. After the restore I had to go to the "All Programs" list and click on Quicktime and iTunes individually to allow them to re-configure, then had to restart the computer again. After that all's well. My lbrary was intact.
I tried everything to get the newest version to work, including completely uninstalling my current versions of QT and iTunes, then downloading the latest directly from the Apple website, but, after 3 attempts, nothing worked. Guess I'll have to wait for the next update and try again.
By the way, your library is not actually stored in iTunes--it is stored in your Music folder, so you should not lose anything by uninstalling iTunes if you need to.

Win7 Offline Files sync error after upgrade to Lion Server 10.7.2

Similar Messages

Maybe you are looking for