Window 7 not support oracle version

**Hello,**
**when i try to install Oracle 10g (102010_win64_x64_database ) on a fresh Set up Windows 7 i get an error Message.**
**It say's my Version is 6.1 failed and only Versions: 5.1,5.2 are valid.**
**On the other side that the Windows 7 should be supported Oracle Version oracle10XE. (which i tried to install)**
**Got any idea what to do, or when it will be supported? Pls inform me which one support(oracle version) windows 7 operating system ?**

Hello,
If you check the software supported on Windows 7 (on Microsoft site) you'll see that even Oracle 11.1
is not compatible on it:
[http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Oracle%20Database%2011g%20Standard%20Edition&v=Oracle%20Corporation&uid=11&pf=0&pi=1&s=Oracle%2010g&os=32-bit]
It's recommended to use Windows XP or Windows Vista SP1 instead (I have 10g XE and APEX 3.2.1 with
Vista SP1 on my PC) . On Windows 7 you may have a feature so as to emulate these OS when you install
a software.
Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Jan 17, 2010 10:30 AM

Similar Messages

Version of Windows OS not supported

Downloaded Adobe Reader 70. When opening desktop message comes up this version of Windows OS not supported. What do I do?

Ok, if you do not have service pack 2 of Windows 2000, you cannot
install Reader 7. Go to
http://www.adobe.com/products/acrobat/readstep2_allversions.html and
choose Windows 2000 SP1.
HOWEVER, if you do not have service pack 4, you should not be
connecting to the internet! You are vulnerable to many viruses. You
should use Windows Update to bring yourself up to date with patches
for Windows 2000. This will take quite some time, but I recommend you
don't delay...
Aandi Inston

"earlier versions of windows are not supported boot camp" with bootcamp 5.1.2

Hi everyone !
I have a problem about installing window 8.0 pro 64-bit with bootcamp ( v5.1.2 ). When I finished setting up, Bootcamp shows me a message as " earlier versions of windows are not supported boot camp " although I'm using bootcamp with 5.1.2 version. How can I resolve it ? My mac is mgxa2 mid 2014.
Thanks a lot !

Thanks for supporting to me .
According to "Boot Camp: System requirements for Microsoft Windows operating systems - Apple Supports" If I use bootcamp version equal or greater than 5, so I can do it. But my current bootcamp likes that. So why not ? . In the first time I set up though bootcamp , it's good but now it always shows that message .

The document is on a volume that does not support permanent version storage

Hi All
I am using Mountain Lion version and i am receiving The document is on a volume that does not support permanent version storage when trying to save a text file on to my QNAP ( Netwrok Storage).
I have done littel research and aparently this is to do with MAC OS, how ever i was wondering if anyone know any ways around this ? or will this be fixed ?
Thanks in adavance.

Mate
That is not what i am saying, if you read my post you will see that this USE to work and it stoped working since mac os 10.8
This does seem to be Apple problem if you read this article
http://support.apple.com/kb/TS4218
the issue i am having is this .
if i create a text file in windows with notepad and save it on a nas drive.
inside a text file i will have
this is a test
i go to my mac open the text file with textedit and add following text in new line
this is test 2
now i go back to windows box open same text file you will see that following
this is a testthis is test 2
basicly what it does it puts it on same line as the first line.
and this all use to be fine before 10.8.2
I am sorry if i came across rude i just need some help.

SQL Developer does not support Oracle 8i

Hi,
I was waiting a tool from Oracle like SQL Developer for a long time, finally it came, but I am a little disapointed, so Why SQL Developer does not support Oracle 8i? Other free tools like SQUIRREL can do it. I also have worked in previous projects using PL/SQL Developer and it works fine...Why a native Oracle tool can not do it?
I am in a project where we have to upgrade the Oracle database to a newer version, but I cannot have access to the old one...
I know there are some threads in this forum, and some people can work with 8i with no issues. Can anyone who works with SQL Developer and Oracle 8i please tell me how to do it?
Thanks,
--Javier
Edited by: javierlarota on Dec 9, 2009 5:40 AM
Edited by: javierlarota on Dec 9, 2009 5:41 AM

That's what I thought, the issue is more commercial ($$$) than technical. Anyway...I downloaded the version 1.1 but now I am getting an ORA-02248: invalid option for ALTER SESSION error. 00604. 00000 "error occurred at recursive SQL level %s".
Thanks,
--Javier

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

"The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

Purchased Photoshop Elements 13, downloaded, entered serial numbers, then got the error message: OS Requirement not met, Windows Vista not supported.

Purchased Photoshop Elements 13 (upgraded from Photoshop Elements 10), downloaded, entered serial numbers, then got the error message: "OS Requirement not met, Windows Vista not supported" now what?

Sweetie Bug wrote:
now what?
System requirements | Adobe Photoshop Elements
The last version of PSE which supported Vista was version 12.
You'll either have to upgrade your operating system to Windows 7 or Windows 8 or return PSE 13 for a refund.

The document "PP_CS_Higher Education_USA_V1" is on a volume that does not support permanent version storage.

The document “PP_CS_Higher Education_USA_V1” is on a volume that does not support permanent version storage. Not sure what this means exactly.
Any thoughts out there?

This error is is usually encountered when trying to update a file that has been opened from a CD or DVD disc.
Move the file to the desktop before you open it.
Where is this file stored, a CD or DVD, external hard drive, USB memory ?

Has anyone else seen the "SharePoint is not supported with version 4.0.30319.18051" messages?

We are running SP 2010 service pack 2.
We are seeing the following messages on at least one of our farm machines. I was wondering whether others here have seen these messages and found a solution. The powershell ise was a running task, but not actually executing any code, etc.
When code was tried with it, the code appeared to be working as far as I could tell.
03/04/2014 15:25:11.28 powershell_ise.exe (0x162C)                     0x15EC SharePoint Foundation
Topology                        d04h    Monitorable     Microsoft SharePoint is not supported with version
4.0.30319.18051 of the Microsoft .Net Runtime.
03/04/2014 15:25:11.28 powershell_ise.exe (0x162C)                     0x15EC SharePoint Foundation
Topology                        888j    Medium          System.PlatformNotSupportedException:
Microsoft SharePoint is not supported with version 4.0.30319.18051 of the Microsoft .Net Runtime.     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.get_Farm()     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.SPFileSystemCacheWatcher.OnChanged(Object
source, FileSystemEventArgs e)

that appears to be doing the trick. I really appreciate your help.
It is weird - all that the kb recommends is changing the command line -version from "-version 2" to "-version 2.0".

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

Why do I get this error message "This volume does not support permanent version storage."

I get this error message when I save a "pages 09" document edited on my macbook pro but saved to my mac mini (over a wifi network). All my Macs are running 10.9.3. My Mac mini is using time machine to back up to a separate hard drive (USB 3 connection). I Tried using Page 5.2 but it is a disaster over my network, slow, crashes, creates random folders....

According to Apple network volumes do not support built in 'versions'…
OS X Server: "The document 'file name' is on a volume that does not support permanent version storage" alert
If in doubt Google the error text with any personal info removed.
Work on it locally & copy it to the network daily if you need versions, otherwise use a real 'version control system' that you have some actual control over like GIT. It is designed for code projects, but you can cram anything in if you really want.
http://www.git-scm.com
I suspect Apples file format will make it miserable with Pages, but there are some great Mac GIT apps.
Using Time Machine would be probably be suffice (run it on the Mac you use as the server & then restore versions on that Mac).

I just downloaded PSE 13 and it won't let me open stating, "OS requirement not met...windows vista not supported"...what do I do?

PSE 13 is supposed to support OS Windows Vista. Now, after purchasing and downloading, states "OS requirement not met...Windows Vista not supported." Can anyone help? Will need simple steps explaining what to do! Thanks!

No, Vista is not supported:
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop-elements.h tml

The iPod software update server could not be contacted. the server does not support this version of itunes its saying

i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
Regards,
Brahma.

You need to update to the latest version of iTunes. Go to the apple and select software update.
i

Your organization does not support this version of lync

Hi.
Have - Lync 2013 server.
Connect from Lync 2010 mobile clients - all ok.
Try to connect from Lync 2013 mobile clients - can't.
Write - your organization does not support this version of lync.
Please, help.
Thanks.

Hi there,
Lync Mobile Client 2010 connects to lync server using mobility services, where lync Mobile client 2013 requires the Unified communications Web API to be active in order to connect.
UCWA and Mobility services are part of the CU1 for Lync server 2013 therefore you should make sure that you have applied at least CU1 and followed the installation instructions properly in order to make sure that Lync 2013 mobile clients are able to connect.
here are some resources to help you
This one contains January 2014 updates
http://support.microsoft.com/kb/2809243
This is a detailed article for the installation process
http://www.zerohoursleep.com/2013/07/lync-server-2013-cumulative-updates-cu2-july-2013-installation-workflow/ although it is written for CU2 it can be used for any cumulative updates
Regards,
Charbel Hanna
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Window 7 not support oracle version

Similar Messages

Maybe you are looking for