Window disappears after second selection

Hi,
I have an OO alv grid that calls a second window. On double-clicking on a value, the value drops into the first window - this works fine. My problem is that the window only closes on a second double-click (even though I can see that my value has dropped into the first window).
After the first selection it comes back into the PBO again, though I have no idea why.
Is there something I'm not setting to stop thsi happening ?
thanks.

Well, if you can copy and rename the executable and get it working, then it's a pretty clear indication that the origianl is under some kind of lock/ security supervision from some tool or the system itself. Have you checked the options for user permissions and execution prevention? Have you looked into the logs and blacklists of your firewall and virus scanner?
Mylenium

Similar Messages

Emails in Reminder window disappears after sometime

Hi Team, I am using Outlook 2013 pro plus with office 365 Email Service. My query is
I flag emails as Flag and reminder to it. After perfect time time set as reminder the reminder window pops up correctly. I have multiple reminder set. so the reminder window has many emails with due dates and i dont dismiss them.
After some point of time Many of the emails from the reminder windows disappears.
I dont know the cause of it. does reminder window in outlook is sync with calender settings?
Is there any defualt time in the registry that causes my reminder window emails to disappear? i think emails which are there in reminder should be there intact until and unless i dismiss them.
Troubleshooting Which i had tried is
Creating a new profile
Repaired the office
Ran outlook in safe mode
Ran the switch /resettodobar /ClearReminders
Set all COM Addins to disabled
Disable Hardware Acceleration

Hi
As per the information and details provided by you, to solve this problem, please follow these steps: -
If your reminder is not working properly, I would suggest proceeding in the following order: -
First, check if the
Reminders are enabled, and make sure the check-box in the
Calendar section that is labeled “Default Reminders” is
checked.
In that same section, the Reminder time should be set to something reasonable, like 15 minutes.
If that does not fix it, then exit Outlook and restart it from the command line with the
“Outlook/cleanreminders” command.
Use Cleanreminders Switch
The easiest way to try to get rid of corrupt reminders is by closing Outlook and reopening it using the
/cleanreminders switch. To do this, press Windows key + R to open the
Run dialog. Type Outlook /cleanreminders in the field and press
OK.
Make sure you have a space between
Outlook and slash. Using Outlook.exe is optional just the program name should work.
A very few people will need to use the full path to Outlook.exe. Click
Browse and look under C:\Program Files\Microsoft Office\ (C:\Program Files (x86)\Microsoft Office\ if using 64-bit Windows).
I hope this information will be helpful for you.
Thanks and regards
Ashish@V

Thunderbird window disappears after GNOME Shell restart

When restart GNOME Shell with Alt f2+r, thunderbird window disappears and leaves a process you cannot kill.

You are using a theme which does'nt support gnome 3.10 yet.
Try using the default Adwaita theme.
Looks like you are using Zukitwo, try this Zukitwo beta theme for 3.10

Email with attachment disappearing after i select it...

email questions...
i also have experienced my email completely disappearing after i open it - all of these emails have had attachement in .xls or .doc or .mov format. i really don't want my emails disappearing without me saying so. anyone else had this happen?
also, says downloading "x" more number of emails but nothing comes in.

robm2009 wrote:
Hi Texas: No my iPad is not jailbroken. I'm really just asking whether the built-in email program on an iPad is encrypted or if someone on the same free WIFI network as I am on is able to see my login and password with a sniffer program (or some such program).
Thanks!
All passwords on iOS based apps is encrypted. It is extrememly unlikely your iPad and that WiFi connection is where the problem lays. In fact, it is quite possible your actual email account wasn't used: The sender address could easily have been spoofed. The email itself is not encrypted (very few mail apps/providers do this), and unless you are in a situation where the mail you send is of such a nature as to be that confidential, encrypting email will be more trouble that it is worth (your recipients will need the encryption key to read it).
Contact support for hotmail and change your password. You might consider changing yoru email address or even provider, but ther eis a chance that wouldn't stop the spam.

Premiere Elements 9 window disappears after loading project

Hello all,
I've been having issues with Premiere Elements (9) lately. I have read other threads similar to my problem and followed some of the instructions (deleting the Pref file, for example).
Whenever I open a specific project (that has worked before until recently), the loading progess bar goes from 0-100 and then it stays there. After that, the entire program disappears. It doesn't crash (as it's still in the task bar), but when I click on PrE9, nothing comes up. When I mouse-over the icon on the task bar, it's just the window buttons (minimize, expand, exit).
The reason I started this thread is because none of the problems I found were really similar to mine.
Any help would be much appreciated.
(Also, please pardon me if this thread is in the wrong place.)
Thanks!

Unitedmoviemaker
Have you looked at any possible involvement of the antivirus program in the way of recent updates for it? Recent Windows Updates? Can we assumed that you have not added, subtracted any programs that would coincide with the onset of the issue?
Have you checked to make sure that your video card is up to date according to the web site of the manufacturer of the video card?
Recently, with Premiere Elements 10 and NVIDIA video card, answers have come from rolling back the driver.
I guess you tried the Adobe Premiere Elements Prefs file deletion. But, did you try deleting the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists?
Do you have the Premiere Elements 9 installation disc for installations files in case a deactivation, uninstall, run through of ccleaner, reinstall is indicated?
But, let me backup for a moment. Is this issue confined to one previously created project or to all your Premiere Elements projects either new or old?
Let us start here and then move forward according to your answers.
Thanks.
ATR
Add On...Usual...confirm that you have the latest version of QuickTime installed, you are running the program as the 9.0.1 Update, and you are running the program Run As Administrator or from a User Account with Administrative Privileges.

Adobe window disappears after input

Hi
I am using Adobe form, webservices with Javascript.
I am using simple javascript like xfa.host.messageBox and looping on response objects. I have 2 buttons on Adobe form with many input fields/dropdowns & Listboxes.
The form first displayed one input field and a Search button, after input isprovided and click on Button, it normally shows 2 xfa.host.messageBox
messages and then fetches the response from webserivce and displays the rest of the form.
The issue is that when click on the button and move open another IE/other application window, later when I want to see the result in form, the window doesnt appear.
When I open the Task Manager, the form is there, so I select the Form and click on "Switch to" to open the form and work further. My user will not want to have such a scenario.
Please advice as what can be done.
Thanks for your advice in advance.
Karthika

I do not understand what you are describing ...can you describe it again and add images or screen shots of what you are seeing to help clarify?
Paul

Apple app windows disappear after coming out of sleep

In Yosemite, after coming out of sleep, some Apple apps are still active but the windows have disappeared. I have noticed this with the Activity Monitor and with the Calculator. I played around with Hide/Show Windows, etc and was finally able to make the Activity Monitor window show up. I was unable to get the window to show up in the Calculator. Killing and restarting the app resolved the issue.
I have not had any problems with non-Apple apps, and Finder and Safari seem to be OK.

Further correction: Even when initially launched, after a restart Activity Monitor and Settings will both launch with no windows. There is a window name shown when right clicking on the icon in the Dock and in the application menu, but clicking on the window does not bring it up for display. With no Activity Monitor, you have to use command line, ps command and kill to clear the processes, following which they can be relaunched with all windows displayed.

Top and bottom of FireFox window disappear in seconds (the window expands too far). All other windows operate normally. Now what? I've uninstalled and reinsta

I was using Firefox for a few years with great enjoyment. Recently I opened it and within a second or so, it enlarged to the point that the top and bottom of the screen expanded off the screen. No other windows in any other program are doing this. The only way to close it is by using the task manager. Very frustrated. What other info do you need?

Hi ConnieHampton,
FIrefox will remember the last window size you had, which is why it keeps opening too large each time you open and close it. To fix this, try resetting Firefox: https://support.mozilla.org/en-US/kb/changes-toolbars-and-window-sizes-are-not-saved?esab=a&s=resize+window&r=7&as=s
If you don't see your menu bar, you may be in full screen mode, and can turn it off by following these instructions: https://support.mozilla.org/en-US/kb/how-make-firefox-and-websites-go-full-screen?esab=a&s=full+screen&r=0&as=s
If this doesn't work, please let us know and we'll figure out another way to fix it.

Server command window disappears after running

Hi,
I have been having major problems with BEA weblogic. I'm just trying to run samples
from their book and I got things to work using version 6.1 which I downloaded
from the site but when it came to Entity Beans, the sample wouldn't work. So I
installed the 6.0 version from the CD and now the server itself doesn't run. When
I Start the Server from the Start Menu, the command window pops up and then just
disappears (at least for teh examples Server). The Default Server opens a command
window, asks for my password (which it prints to the screen by the way...it's
not supposed to do that) and then disappears. I don't know what to do!!
Any suggestions is really truly absolutely appreciated!!
Cindy

Hi,
See where that shortcut points and go to that directory to execute that start
script from command prompt, then you can see the exact exception it will be
throwing....
may be wrong start-up password i guess...
regards
aseem
Cindy wrote:
Hi,
I have been having major problems with BEA weblogic. I'm just trying to run samples
from their book and I got things to work using version 6.1 which I downloaded
from the site but when it came to Entity Beans, the sample wouldn't work. So I
installed the 6.0 version from the CD and now the server itself doesn't run. When
I Start the Server from the Start Menu, the command window pops up and then just
disappears (at least for teh examples Server). The Default Server opens a command
window, asks for my password (which it prints to the screen by the way...it's
not supposed to do that) and then disappears. I don't know what to do!!
Any suggestions is really truly absolutely appreciated!!
Cindy

Siebel Tools 7.8: Watch window disappeared after undocking

Hi everyone,
during a debugging session in Siebel Tools 7.8 I right clicked on the Watch window and deselected "Docked". Since this time the Watch windows has disappeared forever. I can activate and deactivate it, but have never seen the window again and I really need it for debugging scripts... Restarting Tools didn't help either.
Does anyone know what happened here? How can I get the Watch window back?
Sebastian

Please check this SR on support web.
SR 38-3224965921:
Resolution:
The customer renamed the old Tools preferences file (devtools.prf) from the SIEBEL_TOOLS_ROOT\BIN directory to devtools.prf.old and the file was recreated by Siebel Tools when it restarted. The windows returned to their original settings.
Also refer to Using Siebel Tools > Customizing Your Siebel Tools Environment > About Development Tools Options, for further information on the devtools.prf file.

Images disappear after being selected from galleries

I created an app in Project Siena that serves as a product catalog for our Remote Sales team to use on their tablets. The app relies heavily on image galleries for navigation. Everything works fine, except that as you navigate back and forth
through the app pages, images that have been previously selected start disappearing from their gallery upon returning to their page. Anyone seen this happen before?

Hi Bruton, thanks for the quick response. I'll try and break this down as simply as possible:
-Built on Excel tables containing links to images. The images are located in a mapped network drive that is synced offline.
-All images appear fine at first as you navigate through the app; then, as you go back to the Index page and go back through the same pages, you start to see previously selected images disappear from the gallery. All the other images show up fine in
the gallery. Only the ones that have been selected previously disappear. If you close that app and re-open it, voila, all images display without issue.
-This same phenomena occurs while running the app in Project Siena; when the images start disappearing, I will update the data sources, and voila, the missing images come back.
-There are four basic pages that each contain an image gallery: Index, Brand, Group, and Product
-You drill down by selecting a brand, then a product Group, then an individual product (hence the 4 pages)
-Note: some "brands" that are chosen take you directly to the Product page, bypassing the Group page
-The image galleries on each page are used for the navigation (drilling-down to next level)
-When you tap an image from the gallery, you launch the next page... below is the navigation code for the image gallery on the Brands page. (I used "UpdateIf" function w/ 1=1 so it's always true, because I wasn't sure how to use other "Update"
functions.)
UpdateIf(CollectedGroup, 1=1, {Groups: Group_Gallery!Selected!Groups, GroupImage:Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND}); If(LookUp(ProductTable, Products in CollectedGroup!Groups, Products) = ThisItem!Groups, If(IsEmpty(CollectedProduct),
Collect(CollectedProduct, Group_Gallery!Selected), UpdateIf(CollectedProduct, 1=1, {Products: Group_Gallery!Selected!Groups, ProductImage: Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND, Groups: Group_Gallery!Selected!Groups})), If(IsEmpty(CollectedGroup),
Collect(CollectedGroup, Group_Gallery!Selected), UpdateIf(CollectedGroup, 1=1, {Groups: Group_Gallery!Selected!Groups, GroupImage: Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND}))); If(LookUp(ProductTable, Products in CollectedGroup!Groups,
Products) = ThisItem!Groups, Navigate(Product_Page, ScreenTransition!UnCover, {BackScreen:"Brands_Page"}), Navigate(Groups_Page, ScreenTransition!UnCover, {BackScreen:"Brands_Page"}))
Here is the navigation script for the Groups page gallery:
Clear(CollectedProduct); If(IsEmpty(CollectedProduct), Collect(CollectedProduct, Group_Gallery_1!Selected), UpdateIf(CollectedProduct, 1=1, {Products: Group_Gallery_1!Selected!Products, ProductImage: Group_Gallery_1!Selected!ProductImage, BRAND: Group_Gallery_1!Selected!BRAND,
Groups: Group_Gallery_1!Selected!Groups, GroupImage: Group_Gallery_1!Selected!ProductImage})); Navigate(Product_Page, ScreenTransition!UnCover, {BackScreen:"Groups_Page"})
Data script for the gallery on the Groups page:
Filter(ProductTable, Groups in CollectedGroup!Groups)

Video and Picture windows disappear after upload

Posting again with the hope someone out there can help. I
cannot make sense of this problem.
Hi,
A couple of pages I uploaded to the Internet contain both a
scrolling picture viewer and a Flash video player window (with
video). Both worked during the design in Dreamweaver... in preview
(both IExplorer and FIrefox). However, after upload, neither window
appears on the site... not even the spacing is allotted for those
windows. What happened? Why aren't the viewer windows appearing as
they do in preview? Here's the code as it appeared in DW. Thank
you.
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="293" height="273">
<param name="flash_component" value="ImageViewer.swc"
/>
<param name="movie" value="Home Viewer.swf" />
<param name="quality" value="high" />
<param name="FlashVars"
value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',showC ontrols:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:1 0,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['hands6.jpg','ma nwheelchair.jpg','motherdaughter.jpg'],slideLoop:true,frameThickness:2,imageLinks:['hands6 .jpg','manwheelchair.jpg','motherdaughter.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCa ptions:[]}"
/>
<embed src="Home Viewer.swf" quality="high"
flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',s howControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSi ze:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['hands6.jpg' ,'manwheelchair.jpg','motherdaughter.jpg'],slideLoop:true,frameThickness:2,imageLinks:['ha nds6.jpg','manwheelchair.jpg','motherdaughter.jpg'],frameColor:#333333,bgColor:#FFFFFF,ima geCaptions:[]}"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="293" height="273">
</embed>
</object>
Attach Code
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="293" height="273">
<param name="flash_component" value="ImageViewer.swc"
/>
<param name="movie" value="Home Viewer.swf" />
<param name="quality" value="high" />
<param name="FlashVars"
value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',showC ontrols:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:1 0,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['hands6.jpg','ma nwheelchair.jpg','motherdaughter.jpg'],slideLoop:true,frameThickness:2,imageLinks:['hands6 .jpg','manwheelchair.jpg','motherdaughter.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCa ptions:[]}"
/>
<embed src="Home Viewer.swf" quality="high"
flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',s howControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSi ze:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['hands6.jpg' ,'manwheelchair.jpg','motherdaughter.jpg'],slideLoop:true,frameThickness:2,imageLinks:['ha nds6.jpg','manwheelchair.jpg','motherdaughter.jpg'],frameColor:#333333,bgColor:#FFFFFF,ima geCaptions:[]}"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="293" height="273">
</embed>
</object>

Post a link to the page please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"BDStroh" <[email protected]> wrote in
message
news:[email protected]...
> Posting again with the hope someone out there can help.
I cannot make
> sense of
> this problem.
> Hi,
> A couple of pages I uploaded to the Internet contain
both a scrolling
> picture
> viewer and a Flash video player window (with video).
Both worked during
> the
> design in Dreamweaver... in preview (both IExplorer and
FIrefox). However,
> after upload, neither window appears on the site... not
even the spacing
> is
> allotted for those windows. What happened? Why aren't
the viewer windows
> appearing as they do in preview? Here's the code as it
appeared in DW.
> Thank
> you.
>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=9,0,28,0" width="293" height="273">
> <param name="flash_component" value="ImageViewer.swc"
/>
> <param name="movie" value="Home Viewer.swf" />
> <param name="quality" value="high" />
> <param name="FlashVars"
>
value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verda
>
na',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:
>
#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tru
>
e,imageURLs:['hands6.jpg','manwheelchair.jpg','motherdaughter.jpg'],slideLoop:tr
>
ue,frameThickness:2,imageLinks:['hands6.jpg','manwheelchair.jpg','motherdaughter
>
.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}" />
> <embed src="Home Viewer.swf" quality="high"
>
flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'V
>
erdana',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionCo
>
lor:#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay
>
:true,imageURLs:['hands6.jpg','manwheelchair.jpg','motherdaughter.jpg'],slideLoo
>
p:true,frameThickness:2,imageLinks:['hands6.jpg','manwheelchair.jpg','motherdaug
>
hter.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" type="application/x-shockwave-flash"
width="293"
> height="273"> </embed>
> </object>
>
> Attach Code
>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=9,0,28,0" width="293" height="273">
> <param name="flash_component" value="ImageViewer.swc"
/>
> <param name="movie" value="Home Viewer.swf" />
> <param name="quality" value="high" />
> <param name="FlashVars"
>
value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verda
>
na',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:
>
#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tru
>
e,imageURLs:['hands6.jpg','manwheelchair.jpg','motherdaughter.jpg'],slideLoop:tr
>
ue,frameThickness:2,imageLinks:['hands6.jpg','manwheelchair.jpg','motherdaughter
>
.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}" />
> <embed src="Home Viewer.swf" quality="high"
>
flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'V
>
erdana',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionCo
>
lor:#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay
>
:true,imageURLs:['hands6.jpg','manwheelchair.jpg','motherdaughter.jpg'],slideLoo
>
p:true,frameThickness:2,imageLinks:['hands6.jpg','manwheelchair.jpg','motherdaug
>
hter.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" type="application/x-shockwave-flash"
width="293"
> height="273"> </embed>
> </object>
>
>
>

SQLDeveloper 3.0 EA1 - Report Toolbar disappears after second run

About
Oracle SQL Developer 3.0.02
Version 3.0.02
Build MAIN-02.37
Copyright © 2005,2010 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.58.38
Product ID: oracle.sqldeveloper
Product Version: 11.1.2.02.37
Version
Component     Version
=========     =======
Java(TM) Platform     1.6.0_11
Oracle IDE     3.0.02.37
Versioning Support     3.0.02.37
When running a user defined report the first time it shows the tab toolbar (freeze view, run report, etc) but when a new report is opened in the same tab the toolbar disappears.
In order to show again the toolbar I need to close the tab, right click the report name -> Open and the new tab will contain the toolbar.
Verified with version 2.1 and there the toolbar is always displayed.

Thanks. I ran out of time to fix this one it's logged and on the list.
-kris

After mirroring, application window disappears

My application window disappears after I shut down the LCD. For example, Safari is open with one window showing and when I turn off mirroring, the open window is gone. The application shows there is a window open, or 2 or 3, but even with Bring All to Front or Gather All Windows, the windows do not show up on my screen. Before mirroring, the resolution is 1680 x 1050 and during mirroring, it is either at 800 x 600 or 1024 x 768.
Thanks in advance.

Hi dogwood23
Try switching your setup back to Extended Desktop (mirroring off) and drag the Safari window back to the iMac display.
To answer your second question, have a look at the Resolution section of the following article:
http://docs.info.apple.com/article.html?artnum=303086
The part about +"When the computer is mirroring video, it tries to synchronize the resolution of the built-in and external displays. If they can't be matched, the computer will change the resolution of both screens to the highest common resolution"+ say's it all.
I always keep my 17" iMac and 27" flatscreen TV setup in Extended Desktop! That way I control the resolution of each display and the location of all windows!
Dennis

When I try to read a PDF file, the window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

I can no longer read PDF files. The window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

Window disappears after second selection

Similar Messages

Maybe you are looking for