"Window" drop-down shows no windows, if it's the 'primary' window; works fine with all other windows.

The first time I opened Firefox after the 'upgrade' to 34.0.5, it restored all of my windows and tabs from the previous session, as it should. But the Window drop-down showed only "Minimize" and "Zoom", and didn't list any windows, not even the one I was in (I'll call it the 'primary', since it's the one that was listed first). If all of the windows were minimized, I would have nothing, but once I made a new window, all of the windows would show up in the Window drop-down. After some trial-and-error, it appears to happen *only* when the active window is the 'primary', it works fine when any other window is active.
How can this be fixed?

As I stated I already did this and it was not helpful. The drive is not near capacity, but I could not give you an exact answer on how full it is. I know my data is still there as I can see items but just cannot access any windows or menu items as no text is displayed.

Similar Messages

I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror to an AppleTV. The devices will connect, but the video monitors show only a blank screen. The AppleTV's work fine with various other iOS & OSX devices. Ideas?

I have three AppleTV's where I work. I have two at home. I have an iPhone 4S running iOS7.0.2 which mirrors smoothly via AirPlay. I have a 2011 MacBook Pro and a 2011 iMac, both running Mountain Lion, both of which mirror smoothly through AirPlay. I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror. The iPad will connect to the AppleTV, but the TV's and projectors only show a black screen when connected: the iPad screen looks as it should, except that the transitions become jumpy when connected via AirPlay. This is true on both networks: at home and at work. Another gentleman using the network where I work has the most recent iPad, also running iOS7.0.2, and he is having the same problem. I have tried to "Reset All Settings." I have tried to "Restore." Does anyone have any suggestions? Has anyone else experience difficulty mirroring the iPad through AirPlay since the release of iOS7.0.2?

No problems exists with the router (on either network described above) or the multiple AppleTV's which are able to mirror multiple other OSX & iOS devices seamlessly. The problem is strictly with the iPad and iOS7.
The following information was helpful:
Big Apple fan
Re: AirPlay with AirServer connectivity problem
Oct 14, 2013 9:43 AM (in response to ceb2652)
This is an iOS 7 AirPlay mirroring bug...
To make matters worse, the iPad automatically drops its mirroring session 45 seconds after it auto-locks.
3-4 mirroring sessions is all it takes for the iPad mirroring to freeze up.
After this happens, mirroring to an Apple TV only projects a blank screen.
Once the mirroring is hung, the only way to fix it is to restart the iPad.
Apple please fix this iOS 7 issue!

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

It's only Safari/iOS7. Chrome iOS7 works fine.
Solution?
Go to YT and grab the code.
Paste it in a HTML Snippet.

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you

This crap just happened to me this morning where I was sent 90% data plan threshold warningfrom AT&T (while sleeping at 7:09am) then 5 minutes later getting the Overage data plan warning from AT&T. This is all while I'm asleep right next to my phone plugged into a (non-Apple) dock on my clock radio.
Android has a limiting feature, why can't the "smart" guys at Apple learn from this??

In DCOMCnfg "Run application on this computer" is grayed out for my application on two Windows 7 machines, but it works fine on all other machines

We have a COM application that is installed on hundreds of machines around the country. We have instructions included in our install doc of how to set up DCOMCnfg. On one machine in the field and one machine in our lab (both happen to be Windows 7 machines) the checkbox "Run application on this computer" on the location tab in DCOMCnfg is grayed out and therefore we cannot access our engine remotely.
I turned off UAC before installing (we found that the install works much better than way) and it is actually still off. I do not get any DCOM errors in the Windows Event logs when I try to access via DCOM, I just get the standard -2147023174 Server Error. I have added CallFailureLoggingLevel to HKLM\Software\Microsoft\OLE and set it to 1 to enable logging, but still no errors in the event logs.
I pulled a DCOMTest utility off of the Microsoft site. Initially it failed, but there were entries in the event logs indicating that it did not have the permissions it needed. I opened up those permissions and now that test utility works fine. So, DCOM is functioning between the two computers.
This application is used with DCOM by hundreds of people, so I know the application should be working properly. I have uninstalled and reinstalled to verify that everything is registered properly. I have tried turning off the firewall and the anti-virus. I am logged in as an administrator
I am at a loss. Any ideas?
Thanks

Hi,
This issue can occur if the current user profile does not have enough permission or related system file is corrupted. Please try the following steps to troubleshoot the issue.
1. Assure the current user account has administrator permission. If not, please add it to Administrators Group and then test the issue again.
2. Restart the machine in Safe Mode and logon to the machine with the account: administrator. Then, please check whether the option is grayed out.
3. If the option is still grayed out, please try this step.
a. Open C:\Windows\System32 folder and change the ownership of the ComUID.dll file from "trusted installer" to administrators group.
b. Rename that file as ComUID.dll.org
c. Copy the attached ComUID.dl_ file from the Windows 7 installation disk to C:\Windows\System32 folder and rename it to ComUID.dll
Thanks,
Novak

I'm at a gym where I can plug my ipod into the machines to listen to music and save the battery, it worked fine and all of a sudden, it is showing not supported, other peoples still work.

I am at a gym where each machine has a port for ipods so you can listen to music through the machine and not run your battery down. My worked fine for two months now all of a sudden, it is showing "not supported" and no longer works. Anything I can reset on my ipod to get this working again?

Have you tried using a different cable? Try cleaning out the iPod's dock connector port making sure that it is clean and clear of debris as well as free of damage to the pins.
B-rock

TS4085 After updating my iPhone 4s and my iPad 2 to iOS 5.1 I can no longer use the mirroring or AirPlay features with my Apple TV. Before the update it worked fine on all devices. After the update the AirPlay or mirroring icon no longer shows up.

I went through all the troubleshooting steps and it still does not work. Checked wifi, home sharing , Internet connection, etc... Anyone have a solution?

Is your Apple TV "awake"? Sometimes the AirPlay icon won't show for me if the Apple TV is sleeping - pressing a key on the Apple remote ususally resolves it.

I'm having troubles connecting to my wifi at home. I have the 4th Gen. iPod touch. My screen is cracked, does this have anything to do with it? I recently had a trip down to LA, and before my trip the wifi was working fine. Is there anyway to fix this?

the wifi works perfectly fine on all my other electronics, and I've already tried reseting and moving the router. The wifi signal is only strong if I am within 5 feet of the router.

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

Yahoo mail account drops out randomly. I have 2 yahoo mail accounts on my Mac. The primary account works fine but the second account loses connection.

II have 2 yahoo mail accounts on my Mac. The primary account works fine but the second account loses connection. When I put in the password I get a message that it is not the correct password. The only way round it appears to be to go into Yahoo on Safari, log out then log bck in again. If I then go back into Mail and right click on the account I cn then get mail for this account without having to enter a password. The problem only started when I installed Lion, but is still the same in Mountain Lion.

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

Drop Down shows the values twice

Hi,
In MPP, there is a drop dop which displays all the Infotypes along with the description.
Populated all the Infotype using the FM F4IF_INT_TABLE_VALUE_REQUEST in Process on Value-request.
But the drop down shows the values twice as,
PA000 : Organisation Assignment PA000 : Organisation Assignment
PA001: Actions PA0001: Actions
In debugging,i have checked the internal table which i pass to the FM, it has only one time.
Could be help me to resolve this.?

Ensure your code follows below logic
PARAMETERS: pa_it TYPE t582s-infty AS LISTBOX VISIBLE LENGTH 40 MODIF ID 2md.
TYPES: BEGIN OF t_infty,
        infty TYPE t582s-infty,
        itext TYPE char40,
       END OF t_infty.
DATA: it_infty TYPE STANDARD TABLE OF t_infty WITH HEADER LINE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_it.
    REFRESH it_infty.
    SELECT * FROM t582s WHERE sprsl = sy-langu.
      MOVE-CORRESPONDING t582s TO it_infty.
      it_infty-itext = t582s-itext.
      CONCATENATE it_infty-infty t582s-itext INTO it_infty-itext SEPARATED BY ' - '.
      APPEND it_infty.
    ENDSELECT.
    PERFORM dropdown_list_values_create TABLES it_infty USING 'INFTY'.
FORM dropdown_list_values_create TABLES f_tab
                                  USING retfield TYPE dfies-fieldname.
"display internal table as a dropdown list,
"return field 'INFTY' when the event is trigerred
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = retfield
      value_org       = 'S'
    TABLES
      value_tab       = f_tab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "dropdown_list_values_create
Regards
Marcin

I have a tool in window8 its work perfect in all other windows but its show some error in windows8

i have a tool in window8 its work perfect in all other windows but its show some error in windows8
in all other windows its hows all screens nd sound
but in wondows8 its miss 3 screens nd sound its blank screen appear in windows8

after installing this the error appeared
run time error 372
failed to load cntrol 'shockwavectl' from cntroll.dll
'From: [email protected]
To: [email protected]
Subject: RE: i have a tool in window8 its work perfect in all other windows but its show some error in windows8

Website has many drop-down menus. Once selected, user updates the page based on selections. Unable to select more than 1 option at a time. Is there a setting to fix this? I was able to do before, but after reinstall, it has stopped.

This occurs on any website with active menu drop-downs. I am able to select the 1st drop-down, but must then load the page and do the next drop-down. I used to be able to make every selection at once and then reload the page to reflect all of those options.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

I run Dev 6i on Windows 2008 R2 64-bit,the forms are working fine after connection to the database but the reports continue to request for username, password and database connection string every time i try to open a report.

I receive REP-0501: Unable to connect to specified database. I run developer 6i application on windows 2008 r2. I have applied the nn60.dll and nnb60.dll files to the \BIN directory. The forms are working fine. The reports will only display after the correct user id (username, password and database connection string) is supplied. This is happening to all attempts to open already complied form. Pls, help.

If you are connecting to an Oracle 11g database, remember that by default the passwords are case sensitive. To disable that, run
ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

I am using window.print() to print the data of my webpage, it prints only first page and left the remaining while it works fine with IE and Google Chrome, ie print all the pages.

My Page has data more than one page, it has verticle scroll bar to view all data .
I used window.print() to print the data of webpage, but it prints only first page and left the remaining information.
This works fine with Internet Explorer 6+ and Google Chrome.

Does the entire webpage appear in Print Preview? <br />
File > Print Preview

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

"Window" drop-down shows no windows, if it's the 'primary' window; works fine with all other windows.

Similar Messages

Maybe you are looking for