Window sizing for PDA

I am using RH X5. Output format is neg to the developer.
However, how can I set the window sizing to be viewable on a PDA
sized screen? I have minimal graphics but use a lot of tables.
Thanks!
Susan

Did actually figure this out. These are the basic steps :
Minimized the screen
Clicked Alt and spacebar (this pops up a menu).
Selected Move.
Using cursor keys I arrowed down and right a couple of times (cursor starts in top left)
Then I clicked on screen and the Desktop window showed up. I resized to where I wanted it.
Did this process a couple of times until when I opened up a new window it came up to the size I wanted.

Similar Messages

Window Sizing for Discoverer Desktop -- version 10.1.2.45.46c

I have something weird happening now with Discoverer desktop. I can only use it in Maximized screen mode. This just happened a few days ago.
Any suggestions

Did actually figure this out. These are the basic steps :
Minimized the screen
Clicked Alt and spacebar (this pops up a menu).
Selected Move.
Using cursor keys I arrowed down and right a couple of times (cursor starts in top left)
Then I clicked on screen and the Desktop window showed up. I resized to where I wanted it.
Did this process a couple of times until when I opened up a new window it came up to the size I wanted.

Server Sizing For Oracle Database

Hi All,
I need a server sizing for the below mentioned architecture:
This application is basically for logistics company which we are planing to host it centrally with two server's one server for application and one for oracle database along with DR site (Other Location). There are four locations and each location will have 20 users who are going to access this application (20 x 4= 80 Users). We are using MPLS network of 35 mbps bandwidth.
1. Application server: Windows server 2008 R2
2. Database Server: Windows server 2008 R2, Oracle 11g r2
I need a server sizing documents.
Thanks........

EdStevens wrote:
Justin Mungal wrote:
EdStevens wrote:
user1970505 wrote:
Hi All,
I need a server sizing for the below mentioned architecture:
This application is basically for logistics company which we are planing to host it centrally with two server's one server for application and one for oracle database along with DR site (Other Location). There are four locations and each location will have 20 users who are going to access this application (20 x 4= 80 Users). We are using MPLS network of 35 mbps bandwidth.
1. Application server: Windows server 2008 R2
2. Database Server: Windows server 2008 R2, Oracle 11g r2
I need a server sizing documents.
Thanks........I'd seriously reconsider hosting Oracle db on Windows. Obviously there are many, many shops that do. And obviously it is often a case of the fact that they do not have (and choose to not acquire) expertise in Linux. But I've been in IT for 30+ years and have worked on IBM S-370 and its variants and descendents, Windows since v3, DEC VMS, IBM OS/2, Solaris, AIX, HPUX, and Oracle Linux. The first Oracle database I ever created was on Windows 3.11 and at that point I had never seen *nix. Now I am in a position to state that Windows is the worst excuse of an operating system of any I have ever used. I am constantly amazed/amused by how often (at least once a month on schedule, plus unplanned times) that our Windows SA has to send out a notice that he is re-booting his servers. I can't remember the last time we had to reboot a Linux server ( I have 4 of them)
Yes, I'm biased away from Windows, but that bias comes from experience. Hardly a day goes by that I don't see something that causes me to say to whoever is in earshot "have I told you how much I hate Windows?"I was going to refrain from commenting on that, as I assumed they're a Windows shop and aren't open to any other OS (but my assumption could be incorrect).
I haven't been working in IT for as long as many of the folks around here, only about 10 years. I'm a former system admin that maintained both Linux and Windows servers, but my focus was on Windows. In the right hands, Windows can be rock solid. If a system admin has to reboot Windows servers often, he is most likely doing something wrong, or is rebooting for security updates. It's never as simple as "Windows Sucks," or "Linux Sucks;" it all depends on who's running the system (again, in my opinion).
I have seen some windows servers run uninterrupted for so long no one could remember the admin password. But more often memory leaks and the "weekly update" (replacing last weeks bugs with this weeks) is the culprit.
Yes, it really is sad how often you have to reboot for updates if you want to keep your system current. Mind you, it's better to have the fixes then to not have them (maybe). I rebooted my servers about once every month at my old place... which is not that bad.
With that said, in my experience, Oracle on Windows is a major pain. It takes me much longer to do anything. Once you get proficient with a CLI like the bash shell, the Windows GUI can't compare.Agreed. One of my many complaints about Windows is the poor excuse of a shell processor. I'm pretty proficient in command line scripting, but still cringe when I have to do it. Practically every line of code I write for a command script is accompanied by the remark "this is so lame compared to what I could do with a shell script". Same for vi vs. notepad. But my real problem is the memory leaks and the registry. I'm fairly comfortable hacking certain areas of the registry, but the need to and the arcane linkages between different areas of the registry and how they influence 'process environment' remains a mystery to all but a tiny minority of admins. Compare to *nix where everything is well documented and "knowable".
One (of many) anecdotal experiences, this with my personal Win7 laptop. One time it crashed and refused to reboot. A bit of a google search turned up some arcane keystroke sequence to put it into some sort of recovery mode on bootup .. similar to getting into the bios, but the keystroke sequence was much more complex .. it may have involved standing on one foot while entering the sequence. Anyway, it entered a recovery process I've never seen before or since and repaired everything. My first thought was "hey, that was pretty cool." Then my second thought was 'but only Windows would need such a facility.
Bottom line? To paraphrase a famous Tom Hanks character, "My momma always said Windows was like a box of chocolates. You never know just what you'll get."Haha... I like that one. Yes, the registry is definitely horrible. It's amazing to me that a single point of failure was Microsoft's answer to INI files.
I think Windows and nix have their places. Server work definitely seems more productive to me in a nix environment, but I think I'd jump off a cliff if I had to use it as my desktop environment day-in-day-out. The other problem is application lock-down; I can't blame the OS for that, but it's a reality... and using virtualization to run those applications seems to defeat the point to me.

Java application for PDA

Hi,
Can you recommend which is the best PDA (or graphic tablet) for Java development.
I need to develop a simple application : a data entry form to be filled in. The form does not really require keyboard input, just options to be ticked.
I thought this could be developed as a Java Interface.
I was also considering a graphic tablet for this application because the screen space is bigger.
Id be very grateful for any suggestions or tips of what my best options would be.
Is there a more specialized forum for this subject (I havent been able to find one)?
Thanks very much

a better question is: which PDA has a decent JVM installed. There are not many. I would consider .NET mobile if I were you, combined with a Windows Mobile 5+ PDA. You'll have far less head aches.

In Events, want to scroll through window-sized images...

Searched a bit on this, and haven't found a "yes" but thought I would check to see the current thinking.
What I was hoping to do, was utilize the Apple mouse scroll button to easily view all the photos in an event, when they were clicked on to become window-sized. I know I can use the forward and back arrow keys to wander through the set, but the mouse is much more handy (and, I'm afraid, what I was used to with PSE and a scroll-wheel mouse on the PC.) It does let me use the scroll for the thumbnail view, and I'm just hoping I'm missing a setting to allow me to scroll the full-size pictures, too?
This is a useful tool for flipping back and forth when comparing two very similar pics, when trying to select the better one, for example.
Thanks again in advance for all help.

Unbelievable! 100s pf apps and not even sorted alphabetically, you just have to have free time to hunt because sony developers didnt have the time to code a simple search feature! I wish i knew this before i bought the tv I would definitely go for another brand!

Unix window sizing

Hi,
I ran into the window sizing on the Unix box.
When I ran my application on window environment, all
the windows appeared OK. However, when I ran my
application on the Unix box, the windows shrunk
dramatically. Sometimes, I could even see the words
on the window.
Is there a way to fix this?
Thanks
Anthony

Hello Anthony,
we use AIX 4.3.x on IBM and see the same problems on Motif 2.1.
1. Forte supports up to 3.0.N only Motif 1.2 on Unix-Platforms. At 3.0.N some
UNIX-OS's are supported with Motif 2.1.
2. The size of text depends on what font you has installed at UNIX Platform.
You are able to change the default Fonts at X11 and the available sizes of
fonts. X11 use at standard less fonts and font-sizes and maybe only 16
colors.
Because more colors and fonts increase the memory usage of X11.
3. All widgets, which are designed for WINDOWS are converted at X11/Motif.
(e.g. List-View, Tree-View)
4. The functionality of 'size to parent' and other behaviours of
grid-fields differ
at X11/Motif.
Solution: 1. You design the look and feel of the graphic client at UNIX-side.
2. You don't use WINDOW-specific widgets.
3. You migrate to Motif 1.2 at UNIX-side if your platform is
not supported
with Motif 1.2 (some other failures may also occur at
2.1 which may occur
a stack-backtrace error).
4. Set FORTE_STACK_SIZE at UNIX >= 100.000
5. See technotes at cyber-support for specific problems at Motif
Summary:
You will see, the graphical support at Motif (also keyboard specific
behaviours) must
be adjusted at X11/Motif before a synonym usage like WINDOWS is available.
You will see that Forte does not prefer Motif as favourite graphical client.
Don't be worry, you are able to adjust a lot of things in X11/Motif to have
a look
and feel like WINDOWS. LINUX has a graphical interface (fvwm) which simulates
the same behaviours of graphical interfaces like WINDOWS. This is only done
by adjustement of X11-parameters and ini-files.
Hpe this helps
Joseph Mirwald
At 10:45 05.03.01 -0800, Anthony D wrote:
Hi,
I ran into the window sizing on the Unix box.
When I ran my application on window environment, all
the windows appeared OK. However, when I ran my
application on the Unix box, the windows shrunk
dramatically. Sometimes, I could even see the words
on the window.
Is there a way to fix this?
Thanks
Anthony
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Sizing for SAP BCM (Business Communication Management)

Hi All
We have to provide a server sizing to be used for SAP BCM (Business Communication Management) module which will be intergrated with SAP CRM and is to be used for call support. As far as we have reached, we require a Windows server and will host MS SQL database with an approx consumer data of 63 lacs consumers.
Please specify the sizing for this server
Thanks in advance
Lokesh

Sorry, forgot to ask how much physical memory you have on each host.
Let's split it to 2 topics.
1. For ECC, since OracleDB and non-unicode page which are the 2 major factors won't be changed, so I would think here we could just do a math, as long as host A has enough memory which is allocated for Oracle and ECC (extended memory) on host B to be added up.
2. For EP, memory tuning size is basically the same for HP JDK and SUN JDK, that each server node is allocated approximately 2.5GB RAM. Besides, 0.8-1GB RAM needs to be left for OS kernel. But in your case, host B is currently holding 200 users which is a big jump for host A(note: only active user quantity matters here).
That's fine if main physical memory is a little short for host A, utilizing multiple less powerful servers as 2nd tier application server to do the load balancing is also a solution with lower TCO.
Regards,
Effan

AIX v Windows Sizing Guide?

XI31 SP3
There's a windows sizing guide (3.0) however, not one for an AIX implementation. Can anyone please offer any thoughts/feedback on an AIX installation as to performance considerations.
Assuming BI System (XI31 SP3), 100 concurrent users, highest concentration on webi reports and dashboards.
Thanks in advance!

Hey Mark,
I found the following url on a wiki page: [https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000738725&]
The wiki may prove useful if you will be migrating to BI4.0. The url to the wiki is.. [http://wiki.sdn.sap.com/wiki/display/BOBJ/AllyouneedtoknowbeforeupgradingtoBI4.0]
good luck!
Deepu.

How run MSR for PDA through NWDS

Hi all,
I'm working with MI 7.0 . I have installed NWDS on my PC and imported MSR.war application for PDA. In my PocketPC emulator I have installed the Client MI, CrEme and DB2e. How can I configure NWDS in order to run MSR in NWDS? What steps or settings I have to do in NWDS? I set in window->preference the MI home folder after having installed MI Client (for Win32) but I don't understand how run the application considering that MSR has to work on PDA. Help me please.
Many thanks,
Maria

I would add a new column to use as an indication that a particular row contains the string in question, then sum the column.
B3=IF(IFERROR(FIND($B$1, A3), 0)>0, 1, 0)
select B3 and fill down
Then sum the results in cell D2 as shown:
D2=SUM(B)

Using the Formula Node for PDA

I get a compile error when I use C code inside the formula node. Is it possible to use C Code inside the formula node for PDA applications? Do I have to include any file while building the executable for the PDA

Ok, I was able to successfully build an executable file without error. I attached the screen shots of your program in execution. Does this look like the desired result?
I'm confused as to why I can build and run the program on my machine. I have LabVIEW 7.0 and Windows XP. What version of Windows and LabVIEW are you using? Also, are you getting the error window when you try to build an executable or when you attempt to run the VIs within LabVIEW?
Regards,
-Joe-
Attachments:
tutor.JPG ‏100 KB
tutor2.JPG ‏122 KB
detector.JPG ‏46 KB

Bluetooth application for PDA

Hej!!!
I am a student involved in a project that requires JAVA. I am going to use a HP iPaq 5500 which has windows mobile for pocket pc 2003.
What I want to do on the PDA is:
- scan for bluetooth devices.
- detect them.
- send a file.
I would like to know if anyone has information about this. What are your suggestions?
My first step is start looking at java virtual machine for the PDA. Then I would like to know what is the easiest way to do the software. I have read that it can be easily done by using obex or JSR-82 but I am not familar with this. I would be so grateful if anyone could help me with this. Thank you in advance

Hi ssk
can you clarify exactly what you are doing here as I would agree with you that if a restart is solving the problem currently then some kind of memory buffer prob exists but I'm still not clear how you are changing this "Bluetooth friendly name"
will you attach your code so that I can run it and get a better understanding.
thanks
Graham Green
Technical Marketing Engineer
National instruments UK & Ireland

Why SUN not providing VM for PDA (Pocket PC)

Why is SUN not providing VM for PDA (Pocket PC)??
We need to use third party VMs. and most of the Vms are not free.
Is there any VM for pocket PC which supports atleast J2SE 1.2??
Thanks in advance

Since there are so many different confiurations and profiles, coupled with the large number of PDA Operating Systems, sun dont bother making VM's for all of them and so leave it up to third parties to make them. Sun then verifys the VM's fulfil the micro edition virtual machine spec.
there are also political reasons; ie. sun dosent want to make life any easier for microsoft and so are damed if theyt are going to write a VM for windows CE/XP eMbedded. If they ever do support any particular platform its probobly gonna be Palm.
Here's a list of VM's along with technical specs.
http://www.comp.lancs.ac.uk/computing/users/fittond/ppcjava.html
Danny

IPhone 6Plus on every reboot after putting in my password it opens to a small window asking for apple id password

everything works on phone and wow it's big compared to my iPhone 5s. went with space grey since i have had 3 white phones in a row. restored via iCloud backup. updated iTunes as i have about 3,000 songs. 250 bought the rest ripped to AAC from my cc's....what a pain but switched from my windows desktop to this new rMBP late 2013 for xmas and iTunes is slightly different on a mac than windows and where everything is stored on drive.
anyhow problem is every time i reboot after putting in my password and arriving at whatever page i left at i get a very small window asking for my Apple id password. Now the top half is pre filled in with the email address i use for iCloud/itunes/apple/etc.
i did see in settings there is a checkmark i cannot remove that says for apple password "ask immediately" there are no other choices. it can't be unchecked by any method i found.
any help appreciated.

In case anyone else gets this I hit cancel once and it has never come back.

Issue in FF v 3.6.10: I have a page which have more than 20 link, clicking on these link opens up a popup using window.showModalDialog, for the first 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open.

Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

Window sizing for PDA

Similar Messages

Maybe you are looking for