Windows 2003 on x60

i bought an used x60 with docking station and i'd like to install there a windows 2003, but i tried to scratch from the dvd, it doesn't find the hard drive, on the lenovo site there isn't the driver,
is there some way to install it?
thanks in advance for the support
regards

welcome to the forum!
you will either need to set SATA mode to Compatibility in the BIOS, or you'll need to load the intel storage matrix drivers at the F6 prompt during setup. OSes prior to vista/2008 do not contain proper AHCI drivers, which explains why you can't see your drive.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

Support package / add on import error in DB2 V9.1 / windows 2003 system

Hi
I have installed ERP 6.0 IDES version in Windows 2003 server with DB2 LUW 9.1 / FP5.
I have selected "Row Compression" and "Deferred Table Creation" during installation.
Now when I am importing add on BI Content 7.03, I am getting error during Movename tabs phase.
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package ALL, tp step "6", return code 0008
The error message in the file D:\usr\sap\trans\log\P090113.IDS is as follows,
2 ETP301
3 ETP361 "96" Shadow-Nametabs activated, DDL executed
2 ETP362 "6" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/13 02:57:51")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/13 02:58:07")
2 ETP301
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20090113025807"
1 ETP111 exit code : "8"
1 ETP199 ######################################
I have read some notes it may be due to "Row compression" and "Deffered table creation" option in DB2. Please help me in resolving this issue if it is DB2 related.
Regards,
Nallasivam.D

Hi,
Please find the real error message which I found in the same log file. This is a new installation.
System configuration details:
ERP 6.0 IDES SR3 + Windows 2003 enterprise server SP2 + DB2 V9.1 / FP5
BASIS and ABAP support pack level: (700) 13.
Error message:
3 ETP399 INDEX IN "IDS#BTABI"
3 ETP399 LONG IN "IDS#BTABD COMPRESS YES"
3 ETP399
2WETP000 02:53:26: Retcode 1: error in DDL statement for "/OSP/T_REPINFO                " - repeat
2EETP345 02:53:38: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#BTABD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/OSP/T_REPINFO
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:05: Retcode 1: error in DDL statement for "/SAPPO/CMP_ASG                " - repeat
2EETP345 02:54:17: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CMP_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:17: error in DDL, nametab for "/SAPPO/CMP_ASG" not activated
3 ETP399 IN "IDS#POOLD"
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:17: Retcode 1: error in DDL statement for "/SAPPO/CSCRN_HDR              " - repeat
2EETP345 02:54:29: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CSCRN_HDR
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:29: error in DDL, nametab for "/SAPPO/CSCRN_HDR" not activated
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:29: Retcode 1: error in DDL statement for "/SAPPO/F_ASG                  " - repeat
2EETP345 02:54:41: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/F_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:41: error in DDL, nametab for "/SAPPO/F_ASG" not activated
Regards,
Nallasivam.D

Installation problem on Windows 2003

Hi All,
I have installed the saprfc extension on my laptop for testing purposes.
Definitions of my laptop: Windows XP, IIS 6, PHP 4.4.2, SAP GUI 640
Everything works fine and I can access the SAP through the web server on my laptop without any problem.
Now, after finishing my tests I installed my web application on a real production server with the following definitions: Windows 2003 server, IIS 6, PHP 4.4.2
As you can see the two differences are the operating system and the fact that I do not have a complete SAP GUI installation on the server I only located the librfc32.dll under the windows library.
My problem is that I get the message that the php_saprfc.dll extension cannot be loaded (I edited the php.ini).
Doe anyone have any idea why?
Thanks,
Roy

Hi,
I have an installation with my laptop WIN2003 server with apache web server instead of IIS, without problems.
Are you sure that in your php.ini is all OK?
Have you tried to copy the WIN2003 php.ini on your laptop and try to load saprfc.dll?
Lorenzo

Windows 2008 R2 SP1 (64bit) shared folders no longer work with Windows 7 Pro but do work with WindowsXP & Windows 2003

As of last week, our Windows 7 Pro workstations can not map or browse the Windows 2008 Server shares. They can ping the Windows 2008 server. The Windows 7 Pro machines can still access the Windows 2003 Server Shares. The older workstations running Windows
XP can still map to the both the Windows 2003 & Windows 2008 Servers. All the servers can browse to each others shared folders (2 windows 2003 server & 1 windows 2008 server).

Ok, now you're down to network or permissions issues. An unedited ipconfig /all
of server and problem workstation may help. You could also try setting up some auditing.
https://technet.microsoft.com/en-us/library/dn311489.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Migration from Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 Server

I am working on migrating Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 from Old server to new server. We have db around 500 GB and 3 schemas. I installed Oracle 10G on new server, created tablespaces, schema's blah blah and now doing export and import at schema level from old server to new server.
Import is taking more than 4 to 5 hours on new server. My manager is saying, window time is bit longer and he wants me to try possiblities to make this process faster. Can some one help me on this, to use the best possible method to complete this process faster?
Will below step work, if I try?
If I install, oracle 9i and 10g both on new server in different home directories and take the hot backup from old machine and restore on new machine in 9i home directory and use the upgrade configuration assistant from 10g and do the upgrade? Pls advice.
Thanks in advance,
Hari babu
Edited by: user6367891 on Mar 2, 2010 5:28 AM

It looks good.
I have one question in below steps:
To migrate an Oracle9i or older database to an Oracle Database 10g Release 1 (10.1) database for 64-bit Windows:
1 Perform steps 1 - 11 in "Migrating an Oracle Database 10g Release 1 (10.1) Database".
2 Shut down the database on the 64-bit computer:
SQL> SHUTDOWN IMMEDIATE;
3 Start the database migration:
SQL> STARTUP MIGRATE;
4 Migrate the database as described in Chapter 3, "Upgrading a Database to the New Oracle Database 10g Release" in Oracle Database Upgrade Guide.
In step 4, it says, migrate database as described in chapter 3. In chapter 3, it says, to do the upgrade the process using dbca or manually. Pls confirm whether do the upgrade process after issuing startup migrate or not.
Thanks in advance.

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

TS130 (1105) Driver Error in Installing Acronis Backup of Windows 2003 R2

I have run into a serires of errors which Lenovo support believes are related to the Intel Management Driver, but we have been unable to locate the appropriate drivers to deal with these error messages. The errors I have received are as follows:
PCI/VEN_8086DEV_1C02&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
PCI/VEN_8086DEV_1C26&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
PCI/VEN_8086DEV_1C2D&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
halmacpi.dll required to install ACPI MultiprocessorPC (IDtandard computers) in Windows Server 2003 Standard
Support has gone through the available drivers with me but we have not found a solution. Does anyone know what to download to deal with these issues--my Acronis backup of some critical software for my business will not run without these drivers installed.
Thanks!

You must not be familiar with Acronis software.
Let me backup: I had previously purchased a Lenovo server in Dec. 2012 to rebuild my old windows 2003 OS system (a Dell). We successfully moved all the data and set up the software programs on the original Lenovo server with the sole exception of a single SQl based software program that none of the IT experts I consulted with knew how to move. I had called the company who owns the rights to that software program repeatedly in the last 1 1/2 years about the fact that my server was dying, they hadn't provided installation files, I needed to reinstall my license (which was still good) on the new server or I needed to buy a new license, they didn't return my calls.
So, then I bought a second Lenovo server two weeks ago after the old Dell server died yet again (server board this time, Dell thinks) in order to restore this program. Since I don't have installation files, and the company won't get back to me about selling me a new copy, the only way to restore the program is with Acronis, which I had used successfully in trial version for prior hardware failures of this server (this time I have the full version). Acronis does a bare metal install of the entire image of the server; however, to use universal restore onto a new hardware system, you must have the proper drivers. I keep getting errors that these three Intel drivers are missing. So, tier one Lenovo support asked me to post to this board because they couldn't help.
Kristie

Unable to install Sql Server 2008 R2 express on windows 2003

Hi,
I am unable to install sql server express edition with management tools, on windows server 2003. During rules check, it gives an error that minimum os version is not supported.
.net framework requirements have been met.
Is there something that I am missing ? Any pointers would be of immense help
thanks
Saagar

Hello,
Whats is Service Pack edition of Windows 2003 server.As per prerequisites it requires SP2 for windows Server 2003 I guess your server is not updated to latest SP.Please refer below link for hardware and software requirement
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Windows 2003 SP2 upgrade question in regards to OSS 30478

We are currently running our production system on a windows 2003 sp1 two-node cluster with SQL 2005.
I would like to get it upgraded to SP2, but I have a question on OSS note 30478.
There is a sentence in there stating:
-Special features with Service Packs for Windows Server 2003 in the cluster:
Service Pack 2: Before you import Support Package on platform x86_64, you must replace SAP resource DLL on both cluster nodes with the most current version.
Can someone elaborate on "replace SAP resources DLL on both cluster nodes"?
Does that just mean I need to upgrade the Kernel to the latest version?
It seems to be a fairly bold statement with very vague instructions. Anyways any guidance would be appreciated.

for more details see note <a href="http://service.sap.com/sap/support/notes/1043592">1043592</a>
peter

Error in Defining parameters for DB2 while installing IDES on Windows 2003

Hello,
I am facing DB2/LUW:V9:RDBMS:DB2/LUW:WINDOWS_X86_64.* While Installing IDES on 64 bit windows 2003 with DB2 V9., At the time of defining parameters, the SAPInst is not taking the Package Location for the Database parameter and giving me this error.
The set of database DVDs does not contain the DVDs for Windows and I have also downloaded 51032045_3      DB2 9 LUW Windows Server on x64 64bit - Full Install from marketplace but its of no use as well.
Please help me out with the correct database setup file or any other work around ASAP.
Many Thanks !!!
Amit

Hi,
You can download from this path.... My Company's Application Components"........ Complimentary Software".......... DB2/UDB" DB2 FOR LUW 9.7
     51039450      DB2 LUW 9.7 FP2SAP RDBMS Windows x64
     51039451      DB2 LUW 9.7 FP2SAP RDBMS Client
OR
51040240 DVD DB2 LUW 9.7 FP3SAP RDBMS WINDOWS
51040241 CD DB2 LUW 9.7 FP3SAP RDBMS client
Thanks
Siva

Issues with Shell32.dll, NTDLL.DLL and Migration from Windows 2003 to Windows 2012

Hello all,
I am new to ThinApp and working as a consultant to help a company migrate older Windows 2003 software to Windows 2012. They have purchased ThinApp 5.0.4.5 so that is what we will be using.
We have created a clean 2003 VM and did a pre-scan
We loaded the application and configured it and then did a capture.
We then tested the capture the 2003 VM and it works
We then loaded the capture on a Clean 2003 VM and it works
We then loaded onto a 2012 VM and when running the app from a command window get an error -missing import shell32.dll:StrCpyNW
If we run the capture in Emulation Mode on 2012 VM, we do not get the Shell32.dll error but instead the cmd fails with a Fault Module Name - NTDLL.DLL error
I am sure I am just missing the correct location to identify or configure the capture - but do not have the experience to know where yet. (Taking training next week).
Until then, is there any suggestions which I can try?
Thanks for your time in advance,
Vince

Tried and done that. The main issue while configuring the printer from the printer Web Interface is that there is no access to the Digital Sending section due to a problem with the "Sun Java plug in" I think the code mentions 1.31. or similar.
We downloaded the java plug in and installed it. No progress.
We reset the printer to defaults and reconfigured it .. It sees the smtp gateway and access it but fails sending email with scanned documents..
We have tried in very different ways. We connected the printer to another domain SBS server 2003 and it works beautifully. So, I have no idea on what is the problem. We created a firewall exception for ports 390. 1783 from the SBS to the Printer
and still no go..
We have tried four different accounts and nothing. Same results as stated originally.
Any other suggestions??
JFM

Problem on installation of windows 2003 Standard Ed. 64 bit with 10 GB RAM

Hi,
I'm trying to install the Oracle 10G R2 on Windows 2003 Server Standard Edition 64 bit on HP machine 64 bit.
My problem is that the Oracle is seeing just 4GB of RAM.
I found some Oracle notes that explain this problem for machine and OS with 32 bit.
Any idea?
Thanks,
Sergio

Are you installing Oracle 32-bit?
(In that case, the process virtual memory addressing is limited to 2^32 = 4GB. Note also it is virtual, not physical memory)
64-bit editions (e.g. for X64) are available from:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Message was edited by:
orafad

Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

HI Friends,
I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
C: 9.6GB
G: 24GB
H:64GB & I: 73GB.
RAM is 6GB
While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
G: drive has one more folder Program files which is of 155KB and no other files exist in it.
But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
What could be going wrong?? Please suggest me how to correct this
Thanks
mv_d

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Netweaver 2004S installation on Windows 2003 server : Oracle 10g Problem

Hi Friends,
I am installing the SAP Netweaver 2004s on a server which has Windows 2003 server Operating system on it.
It has got 6GB RAM and has, 5gb of free space in C drive, H: drive has 70 gb and I: drive has 50 GB of free space in it.
I am running Pre_requiste checker tool to check my hardware & software requirements in order to go ahead with installation, as a part of SAPInst.exe execution.
The results of Prerequisite checker tool are satisfied except for one " SWAP SPACE VALUES"
I am getting the message as follows
"The Minimum SWAP SPACE values required is 10994MB and currently you have 5993MB"
How to increase this SWAP space value? Please let me know the procedure.
Currently my server has a paging file details as below : Min size : 2MB & Max size : 9214MB allocated on C: drive. No other drive has paging file allocation.
What effect will I have if i proceed without meeting this requirement??
Suitable answers will be rewarded.
Thanks
Diwakar

OPen windows explorer and right click my computer
Select Properties
Click Advanced Tab
Click Settings (performance)
Select Advanced Tab
In virtual memory - click change.
Increase swap space/page file here.

CF 9 on Windows 2003 installation problem

We've been trying to upgrade CF MX 7.02 (multiserver) to CF 9 on Windows 2003 and installation ended with 2 errors:
Install JRE:           C:\JRun4\jre
                           Status: ERROR
                           Additional Notes: ERROR - Error Copying the JRE to the destination directory
                                             ZeroGlq: Target file was read only or did not have write permissions and was not overwritten
Web Server Connector Configuration Error
                           Status: ERROR
                           Additional Notes: ERROR - JNDI port 2904 for server cfusion is not active
Now Windows can not start JRun CFusion service there at all.
The most weird thing is that we seem to be unable to uninstall what got installed of CF 9: [Remove] button in Add or Remove Programs does not do anything.
It works normally with the other programs but it would not remove CF 9.
The C://JRun4/Uninstall/Uninstall Cold Fusion 9.exe does not execute either while executables have been added into Control Panel -> System -> Advanced -> Performance -> Data Execution Prevention.
What would we do at this point?
Thank you!

Hi,
Sounds like you got trouble there and I worry suggestions on forum may not be the best or indeed on track.
I guess c:\jrun4 was the same folder that CF7 installed and perhaps CF7 did not uninstall well or upgrade well to what is now a broken CF9. So now your currently not functional at all I guess you can be brutal and apply forceful changes since you seem to be in place where you can not easily go forward or back. How about this?
-rename jrun4
-reboot
-install CF9 again to newly created jrun4 folder
That way you can keep your neo*.xml files to refer and hopefully have a working file set present with CF9 functional.
HTH, Carl.

Windows 2003 on x60

Similar Messages

Maybe you are looking for