Windows 7 and HP MediaSmart

i upgraded my wondows vista 64-bit to a windows 7 home 32 bit, i had to download the hp mediasmart software but when i click to install it, it just blinks and also it said it has stopped working, etc..ive tried so many things but can't seem to find the problem

It may be with your Security Software is blocking access to the download of the channels and TV guide lineup. Here is a letter i sent to my internet provider and Hp explaining the solution. I spent a whole week trying to figure out why this did not work. Hope this helps .
(Part of the notice I sent to those who try to resolve the problem)
When my HP laptop came back from the manufacturer because of a cable that needed replacing in which they reformatted the hard drive I had to reinstall all the programs software. 
Previously I had been using another Security software because the CA Security suite was not available for Wins 7 with 64bit. When I noticed that   now it was provided for my version of windows I downloaded it.
When I attempted to setup my Windows Media Center software I got errors with the download of the channels and the guide lineup would not work. I called Time Warner for a solution thinking it might be the CA security software since that was the only thing different from my original setup. I disabled the firewall.  Still the problem persisted.
When I removed the CA software and installed the security software from another company the problem was resolved.
Please be a aware that   CA software is not compatible with Wins 7  64 bit with  Media Center that uses a TV tuner to download channels and the electronic guide lineup. (Also would not work with  HPMedia Smart) and that RoadRunner and HP spent hours with me on the phone trying to resolve the issue and no one from either company knew there was an issue with CA.
Also another problem that I have had on previous Media Center computers using XP and Wins7 with a TV tuner is with the setup when selecting the area code that I am in, 75025 your Time Warner service is not listed, I always have to use a zip code from Bedford for my Plano, TX lineup. This was discovered after trying several cities in the area that had a similar lineup. Why isn’t the Plano Time Warner listed as an option when using zip code 75025 in selecting the TV channels? 

Similar Messages

  • Open discoverer report in new browser window and without connections page

    Hi All,
    We are using Oracle 11g Discoverer 11.1.1.4.  Requirement is to open the discoverer report in a new browser window and without connections page.
    When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
    Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
    This excerpt is from the documentation available in the link
    " _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
    http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
    and Here is what we use to invoke our reports.
    http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
    Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
    Thanks in advance

    Closing the thread
    We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

  • New ipod seen in windows and itunes but not in sync diagnostics

    I bought a second Ipod. Oldest one works fine. New one is seen in Windows and in ITunes. Diagnostics "finds" new Ipod, but on Sync diagnostics says "no Ipod found".
    Ne Ipod looks like it's staring to sync, then just stops after 30 seconds and goes to "connected" screen.
    Have done resets of Ipod and reboots of PC.
    Driver shows no error in Device Manager.
    Have tried three differenct cables and both USB ports on the pc.

    I jus tried that. Computer acknowledged Ipod and Itunes performed restore. Afterward, same situation...no sync. Screenshots:

  • I wonder to know what is the enterprise solution for windows and application event log management and analyzer

    Hi
    I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
    I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
    I Want to know the point of view of Microsoft expert and give me their experience and solutions.
    thanks in advance.

    Consider MS System Center 2012.
    Rgds

  • Want to use a Lacie External Hard Disk with Windows and Mac? Can I?...

    Hi, I've just purchased a Lacie Extreme D2 external hard disk, I'm looking to use it to move film clips from my Mac G5 to my Sony Vaio laptop. I'll connect the Mac using Firewire 1 and the PC using USB 1.
    I understand there is an issue with setting the compaitibility of the hard disk to either Mac or Windows format but I'm wondering if I can set it to both, so it's possible to transfer these files? The hard disk is Windows and Mac compatible but does it have to be partitioned a certain way?
    Any help is much appreciated.
    Thanks,
    Alex

    Format the drive as FAT or use the Mac format (HFS Extended) and install MacDrive on the PC.

  • Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How do I install windows and bootcamp on my macbook Air

    Hi
    I need to install Windows and Bootcamp on my macbook Air, due to a software tool a customer needs that only runs on windows.
    The initial instructions say I cannot do this with a remote DvDplayer,
    Who has experienced this?
    Chris

    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • [SOLVE] Dual Boot Windows and ArchLinux with Syslinux

    Ok, i installed ArchLinux on my laptop with Windows XP (syslinux) and I cannot find get Windows to boot or mount it. I have tried to do what i can to do this but cannot. I Installed XP first like a should and something i think might be needed to know is after i created the partitions scheme (10Gb (boot partition), 50GB (XP), 80GB(was unallocated)). The installation disk formated both 2 partitions in NTFS but i installed XP on the second and Windows reported them as C and D drives. Windows being D. Thought that was bit werid thinking Windows installed the mbr on that partition. When I installed ArchLinux, it did have the boot flag set on 10GB (or C drive).
    Since I installed ArchLinux, I have been unable to find a solution to mounting/booting to Windows. Installed NTFS-3G and that didn't work when i tried mount /dev/sda3 windows and i did created a folder named windows but got ...
    mount: wrong fs type, bad option, bad superblock on /dev/sda3,
    missing codepage or helper program, or other error
    In some cases useful info is found in syslog - try
    dmesg | tail or so.
    Tried dmesg | tail and got
    [ 76.524133] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 179.468499] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_DEVICE_CHECK event: unsupported
    [ 705.472330] 8139too 0000:02:03.0 enp2s3: link down
    [ 717.380879] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 726.447184] 8139too 0000:02:03.0 enp2s3: link down
    [ 727.596128] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported
    [ 732.616138] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 733.848832] 8139too 0000:02:03.0 enp2s3: link down
    [ 834.062062] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 2131.449211] perf samples too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
    This is when i run sudo lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 149.1G 0 disk
    |-sda1 8:1 0 9.8G 0 part /boot
    |-sda2 8:2 0 1K 0 part
    |-sda3 8:3 0 53.6G 0 part
    `-sda5 8:5 0 85.7G 0 part /
    sr0 11:0 1 1024M 0 rom
    My syslinux is
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/sda5 rw
    INITRD ../initramfs-linux.img
    LABEL windows
    MENU LABEL Windows
    COM32 chain.c32
    APPEND hd0 3
    NOTE: chain is in the same directory with syslinux
    I really think Windows got corrupted but not sure. Thought about repairing the mbr on windows and booting to it then reinstall syslinux but really don't want too.
    Thanks in advance
    Last edited by jag-ster (2014-11-27 02:12:12)

    Here is the partition table:
    /dev/sda1 one HUGE linux /boot primary partition (assuming ext4)
    /dev/sda2 "name" of the extended partition
    /dev/sda3 primary Windows partition (assuming NTFS)
    /dev/sda5 logical Linux root partition (assuming ext4)
    /dev/sda1 to /dev/sda4 are either all primary, or three primary and one extended. After /dev/sda4 all partitions are logical. If you're still wondering why is there no /dev/sda4, it's because you have 2 primary and one extended, so /dev/sda4 is reserved for another primary partition.
    Windows problem:
    The /dev/sda1 which Windows named C: is Windows equivalent of linux /boot. When you told linux to place its /boot on /dev/sda1 it formated boot files of Windows. Now you have Windows OS with no kernel. In other words there is no way to boot Windows if you don't reinstall it. Actually there is a way, but you would than screw up Arch.
    Mounting problem:
    You can never mount extended partition, only logical (an extended partition is made of logical partitions). You want to do:
    sudo mount /dev/sda3 -t NTFS-3g -o rw,uid=YourUserName /path/where/you/want/this/partition/mounted
    EDIT:
    Try it this way:
    - Backup all your data
    - Delete every partition
    - Start Windows installation
    - Make only one partition (c:/ for Windows)
    - Let Windows make another partition
    - Make one more so you could have a data partition, which does not need to be formated to reinstall Windows
    - Start Arch installation
    - Get to partitioning
        =Partitioning=
        - /dev/sda4 extended (take the rest of the drive)
        - /dev/sda5 logical /boot 512MiB
        - /dev/sda6 logical /          20GiB
        - /dev/sda7 logical /home (the rest)
    Making a separate /home partition will come in handy when reinstalling Arch (any linux distribution), or switching between distros, because it is the equivalent of D:/ in Windows. Also consider LVM.
    Last edited by bstaletic (2014-02-28 23:25:33)

  • FIREFOX 26 changed the 'post crash' page with the list of windows and pages. It was a real HTML page with links for each page. Now it isn't (and blows)

    * You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
    crash.
    This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
    The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
    manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
    copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
    Now the pages are no longer links. You cannot right-click them.
    The thing in the probser is no longer a page that I can drag into a new tab.
    Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
    'STUPIDITIY'
    Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
    search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
    things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
    into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
    anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
    still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
    forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
    being out of date).
    FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
    1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
    logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
    months browing available to me.
    However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
    the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
    ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
    sites is listed. There ought to be several; hundred root URLs listed.
    Please fix history as this change seriously "blows greasy chunks"
    PROBLEM (a stupid change in the new FIREFOX version)
    FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
    'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
    able to be done.
    The old method was wonderful as it had this behavior :
    *** The old method for displaying your 'Recovered Tabs' allowed you to :
    a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
    'recovered windows and tabs '.
    2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
    could select just a few of them to open as a group, and stil have the old list handy.
    You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
    People used to make a copy of the page for later use (with a drag)
    we also used to open pages with a right click (which no longer functions
    This new method seriously blows big greasy chunks. A parge loss in function has occurred.
    Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)

    (1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
    You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
    If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
    (2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
    orange Firefox button (or Tools menu) > Options > Privacy
    * The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
    * The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
    Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • Windows and AMD 64 X2

    Hi
    I don't really know if I can get away with posting this here, but this is the only forum I know where people are technically competent enough to help me out. Recently I've put together my own computer, I had a few issues to start off with but then everything worked fine. However one day when I loaded Windows it said "new hard ware found", then something along the lines of "x64 based processor found" and "multicore processor detected and installed" followed by "new hardware installed but may not work until computer is restarted".
    So I though, o..k, and restarted the computer, when I did I checked my performance panel in windows and noticed it was no longer detecting my 2nd core. After reading about on this forum for a bit I messed about with drivers, installing them, uninstalling them, updating them, rolling back them and finally I got it to work again. However windows did the same thing again a few days later (today in fact) and now after messing about a lot I've not been able to resolve the issue at all. Can someone please help me out or point me in the right direction to get help.
    -Motherboard type and model (MSI K8N Neo4)
    -Bios (1.6)
    -CPU type and model (AMD Athlon 64 X2 3800+)
    -Memory quantity (2 x 1 GB)
    -Video card name (nVidea 6600)
    -Hard Drives: 200GB IDE0 they are located on
    -Optical Drives: Samsung IDE1 and IDE2, DVD writter and DVD reader
    -Windows XP Pro x64 SP1 (equivalent to SP2 for most XPs)

    Quote from: utwo229 on 10-September-05, 00:43:49
    I assume you are using the performance monitor in the task manager. Under VIEW.....CPU HISTORY you should get the option to display ONE GRAPH ALL CPU's or ONE GRAPH PER CPU. On a single CPU system it only gives the option ONE GRAPH PER CPU. This may help determine if windows is in fact not seeing the second processor.
    I already knew that thanks, I also had AMD Power Monitor running which doesn't have this option and just shows however many cores are running. O.K, the problem seems to have kind of  gone away and I don't know why...
    But thanks for the help, if I figure out why it's working again I'll post it to hopefully help other people.

  • I want to have all my tabs return after closing. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked, but it does not work. When I open FF again none of my formerly open Tabs show... FF v.4.

    When I open FF up again after I have closed it, I want all tabs to return. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked-does not work. In addition, the feedback window fails to 'Submit...!'

    Some things to check:
    #'''Browsing history must be saved'''
    #*Firefox button: Firefox button > Options > Options > Privacy > [X] Remember my browsing history
    #*Menu Bar: Tools > Options > Privacy > [X] Remember my browsing history
    #'''Also make sure you do not clear "Browsing History" when using Clear Recent History or when closing Firefox'''
    #*Using Clear Recent History
    #**Firefox button: Firefox button > History >Clear Recent History
    #**Menu Bar: Tools > Clear Recent History
    #*When closing Firefox
    #**Firefox button: Firefox button > Options > Options > Privacy (checked) > Settings
    #**Menu Bar: Tools > Options > Privacy (checked) > Settings
    #**See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
    #'''Make sure you are not in Private Browsing mode''' or '''in permanent Private Browsing mode''':
    #*See: https://support.mozilla.com/en-US/kb/Private%20Browsing
    #'''If you have the'''Tab Mix Plus'''extension''', then disable the built-in session restore.

  • "show my windows and tabs from last time" does not work after upgrade to 8.01

    After I upgraded to the latest v8.01 I have lost all my tabbed sites and even when trying to add them and save them with the Tools>Options>General>Start up>when Firefox starts selected feature "show my windows and tabs from last time" it does not hold the saved sites and when browser is restarted it always loses all the tabs and only shows one tab with Firefox home webpage. I need to have several sites open to work and the only way to do that now is to make sure I click the "Use current pages" under General Option in Tools. It is getting very annoying because I keep changing my tabs to different websites during a session and I am used to just closing the browser, relying on having them all back in when restarting Firefox.

    Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
    *https://support.mozilla.com/kb/Clear+Recent+History
    *https://support.mozilla.com/kb/Firefox+does+not+ask+to+save+tabs+and+windows+on+exit
    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Multiple_profile_files_created

  • When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....

    When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....
    Could some one give help and let me know where I can probably find the settings option that allows me to change and switch to previous situation where it was possible to decide time to time how to proceed either opening the file or saving it ??
    Thanks in advance
    David

    What is your operating system?
    Open a PDF from where?  If online, in what browser?

  • Jabber for Windows and Iphone

    We are running Jabber on cucm 9.1 WE use microsoft RDS and all works fine locally. users can sign in with their AD account and see their presence, use their deskphone and receive email. that works on both the windows and Iphone clients.
    When they are logging in via a anyconnect VPN however. the im and presence shows no status for anyone, even though they are logged in but the phone and vociemail is fine, calls can be made and received. The ASA is not blocking anything so not sure where to start with this one

    I just did a full deployment for jabber 4 windows iphone, ipad and android and to get my presence status working as well as photos shown and directory searches I had to make use of the BDI config in my jabber-config.xml file on the cucm as well as the UC services on the cucm and mine is working 100%.
    That is all why I am asking.

  • Cisco Jabber 9.6 for window and Unity

    Hi All,
    I am having some hard time getting jabber working properly... I have a few questions, i hope that i can have answers for.
    1. Now, just to use Jabber on the destop(I don't want to create CSF profile as that consume one license) do i still need a license?
    2. Jabber can connect to CUC... users are getting :" you are not assigned in to your voicemail account. Go to the phone Account tab in the option window and enter your username/pass in the voicemail section.
    But this VM option does not exist... Some other docs mention appliction tab in the CUP server itself but still no go. Other also mention LDAP integration but i  can have LDAP ingrate with CUC yet.
    Thanks

    1. If you dont want to use the Jabber as softphone and want to use for only IM  control , then no need of CSF device and no license required.
    2.
    Check the service profile on CUCM set like above for credential source .

Maybe you are looking for

  • IPhone no longer showing up in (My) Computer and photos no longer synching

    I recently switched from a desktop to a laptop, both of which run Vista Ultimate. The desktop synched fine but the laptop will not sync pictures. I noticed that the desktop shows the iPhone in Computer as a camera but the laptop does not. I have: 1.

  • Problems displaying Sybase Numeric DataTypes

    Hello, I have a universe built on top of a Sybase ASE database. The universe contains a Number object which maps to a Sybase Numeric data type with a data type length of 9 and precision of 19. When we pull the data form this object onto a webi report

  • Java code to list files in Windows O/S by FIFO sequence

    Hi, I am new to java and working on a project which needs to list files from Windows O/S by FIFO sequence. Here is the scenario, One of the application logs/stores files in Windows System. After that files has to be moved to another files system on A

  • Do you use two iPhones for developing?

    One iPhone as a consumer device and the other purely for development. I'd think two iPhones gets expensive though. But if you use one, that's a big hassle and risk. Just wondering what the nornal methods are. Thanks.

  • HELP-I'm stuck out of mail!!

    Something got corrupted in my "sent" folder. Everytime I fire up the mail.app it opens on the sent folder and the HD spins for a while, and then the app crashes and I am offered to send feedback to Apple. And since it crashes on the sent folder, when