Windows 7 and Office 2010
I am trying to setup a BB on a computer that is running windows 7 (64bit) and office 2010. For some reason it will not sync correctly. Has anyone had issues witht this? The phone is an 8850.
Hi and Welcome to the Forums!
Many have had issues, many have had success. The only way to diagnose is with details..."it will not sync correctly" only leaves us to guess. Here are some details that might help:
1) Your BB Desktop Software version -- all 4 octets please
2) Your BB OS level -- again, all 4 octets
3) Your carrier/country
4) What, exactly, happens when you try to sync? Can you configure and not sync? Can you not configure? Are there error messages? Details please to help us to help you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?
If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match -
I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg
Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
Resource booking with Windows 8.1 and office 2010
I've two SP3 Laptops running 8.1 on out network. I've Office 2010 installed on these and they are mostly working fine;
However they cannot book resources - this is a common win7 fault we would fix here - http://support.microsoft.com/kb/982774/en-gb
But its not working under Win 8.1, neither the fixit icon or the manual config.
We are presently running exchange 2003
Is there a 8.1 2010 fix you know of?
Many thanks,
Stuart
I asked this yesterday of this forum -
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/resource-booking-with-windows-81-and-office-2010/1b52161c-eb71-4dd5-a19e-14a4fdfe0abb
, but they said that this pro forum was more suited for more technical issues.
StuartHi,
Currently I don't have the exact same environment to test, please make sure you have modified the registry keys correctly and if possible, try this manually on multiple Windows 8.1 machines to see if this is an individual issue or widely affected. If this
fix doesn't work on all Windows 8.1 machines, please provide feedback or to report this issue with this solution, please leave a comment on the "Fix it for me" blog or send an
email message.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Windows 7 Pro and Enterprise and Office 2010 Not Able to re-Activate
In September 2012, I was tasked to provide desktop support for a small <50 seat school that uses a combination of Windows 7 Enterprise and Pro as well as Office 2010 Pro Plus with Volume Licenses purchased through Dell. In May of 2013, it was discovered
that our Microsoft Volume License agreement had lapsed and at the time we could not afford to renew it. In September we purchased a 5 seat license from JourneyEd for Windows 7 Pro and Office 2010 Pro Plus. Also in July 2013, we upgraded and consolidated our
server setup.
In November, we began to see notifications that our Microsoft products were becoming deactivated and needed to be reactivated. When we would try to reactivate, there would be an error message that said reactivating failed with no further message.
I need assistance to determine what is causing our licenses to deactivate and also how to fix this issue.
Thank you in advance for your assistanceHi,
For licensing related issue, you’d better contact Microsoft licensing team. In the United States and Canada, you may call the licensing team directly at 1-800-426-9400 (select option 4), Monday through Friday, 6:00 A.M. to 5:30 P.M. (PST) to speak directly
to a Microsoft licensing specialist. In this way, you will know the detailed information about license.
Worldwide customers can use the Guide to Worldwide Microsoft Licensing Sites
http://www.microsoft.com/licensing/worldwide.aspx to find contact information in their locations.
Thank you for your understanding!
Regards,
Ada Liu
TechNet Community Support -
Windows 7 and Office 2010 activation issues
hey everyone
since a few days we facing really strange issue here within our school. We are running windows 7 machines and office 2010 and all our different machine types is it VDI VMs, physical laptops, desktop computer or provisioning machines (Citrix PVS) are facing
issues with the licensing.
Sometimes Windows 7 Key is not installed anymore, sometime it is just not activated same for office. So the KMS is installed with the KMS host keys since years and KMS service is running. Also the DNS Output points to the server
C:\Users\.........>nslookup -type=srv _vlmcs._tcp
Server: DC....
Address: 192.168.X.Y
_vlmcs._tcp.Domain SRV service location:
priority = 0
weight = 0
port = 1688
svr hostname = KMSHost
KMSHost.domain internet address = 192.168.X.Z
Also when i manually force the machines to update against KMS with VAMT or CLI it is working. What could cause that issues?
Time issues?
Scripts?
Thanks for any clue and adviceHi Duke,
"since a few days we facing really strange issue here within our school"
Have you made any modifications to the KMS server or the whole environment ?Will the issue persist or occur randomly ?Will it occur on the specific ones or all the machines ?
There are several specific log recorded in the event viewer when the KMS try to activate the machines .We can try to check the event logs both from the client and the KMS server to troubleshoot this issue .Please also check the Windows logs\Applications
,system logs for useful information to troubleshoot this issue .
Here are two links for reference:
How to troubleshoot the Key Management Service (KMS)
https://technet.microsoft.com/en-us/library/ee939272.aspx
KMS host troubleshooting & monitoring
http://blogs.technet.com/b/quenguyen/archive/2011/11/09/kms-host-troubleshooting-amp-monitoring.aspx
Best regards -
EPM 11.1.2 with Windows 7 and Office 2010
Hi all,
We are getting majorly upgraded to Windows 7 and Office 2010 soon. We use EPM 11.1.2 suite of products. Will all the end-user web applications still work?
I already found out that Smartview 11.1.2 is not supported for Office 2010.
Does anybody have experience working with 11.1.2 and Windows 7?
Thanks,
SujaniAccording to Oracle Support, KB ID 1191235.1, there is Office 2010 suport for 9.3.3 and 11.1.1.3.02. That release is patch 9889521 and is for SmartView only.
Havnig said that, people seem to be using it:
Essbase excel add-in 11.1.2 with office 2010 Excel ?
Re: Hyperion Essbase Excel Addin - Unable to connect
Of course you take your own chances with this -- it is an unsupported combination right now.
Regards,
Cameron Lackpour
P.S. John Booth posted today a different patch release (I know, you're on 11.1.2, but for the 11.1.1.3 readers): http://www.network54.com/Forum/58296/thread/1294100830/Does+11.1.1.3+support+Windows+7+and+Office+2010-
I'd be more inclined to go with John's patch number than mine -- I am just browsing through Oracle support -- he does infrastructure for real.
Edited by: CL on Jan 4, 2011 2:18 PM
One note -- the KB article was dated 21 Dec 2010, so it's pretty close to up to date. -
Does Windows 7 and Office 2010 combination supports Smartview 9.3.3?
Does Windows 7 and Office 2010 combination supports Smartview 9.3.3.
During the installations of smartview in one of our client machine which has Win 7 and Office 2010, installation failed.
any one has idea? pls response me asap. you are highly appreciated.
Edited by: 837268 on Feb 16, 2011 5:44 AMAs per http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here_933.pdf, Office 2010 32 bit and Win 7 are supported for 9.3.3.
What is the error?
HTH-
Jasmine. -
Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?
If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match -
Unexpected restarts when deploying Windows 7 and Office 2010 updates
Hi
I am deploying Windows 7 and Office 2010 updates via SCCM 2012 sp1 and have a couple of questions
Question 1)
The updates are made available to clients at 9am on a Tuesday morning. The users get notification that updates are available to install. If the user doesn't install the updates, the client will wait 24hrs and then install the updates automatically.
We have set the restart behaviour to 24hrs, so again, the user will get a pop up saying that their machine will restart in 24hours. In my testing I have seen no more pop ups appear until 15 minutes before a restart is due and then a window appears
with a count down of 15 minutes but I think this might be standard behaviour. I am not sure why there are options in the client settings to remind users frequently about the impending installation of update but not of impending restarts. The
reason we delay the restart by 24hrs is to give the users the chance to restart their machines over night. Is there a way of providing more notifications of computer restarts ? The User Experience in the deployment of the updates is set to
Display in software center and show all notifications. We have Group Policy set to Not Configured for Windows Updates apart from the user policy
Remove Access To All Windows Update Features which is set to 0 - Do not show any notifications.
Question 2)
Another issue we have is that we have client machines restarting without any warning at all. I have tested setting the user experience to suppress restarts but have the issue regardless. It appears that this happens if the client
is off when the deployment schedule reaches its deadline and the restart time is missed. I had one user who did restart her machine because she was prompted to restart. When the machine came back up it looked like it installed another update and
then just resarted without any warning. This hasn't happened often but a one user was on a Lync call when the restart occured and she was not happy.
Any help would be much appreciated.
ThanksHi Daniel
I have done an RSOP on a VM I am testing and only have the user policy :
Remove Access To All Windows Update Features which is set to
0 - Do not show any notifications.
And the machine policy :
Specify intranet Microsoft update service location which is set to
Enabled The GPO Name is Local Group Policy
The policies look OK.
As a test I have deployed some updates and set the user experience to
Display all notifications and set the Suppress restarts
for both Servers and Workstations. When I deploy the updates, I get notifications that the updates are installing (when the deadline is met) and then I get a prompt telling me that a restart is required. I also get a windo letting me restart now
or I can ask to be reminded in x number of hours. This seems like expected behaviour. It does not force a restart. However if I leave the VM on over night I come in the following day and can see it has restarted. looking at the WindowsUpdate.log I
can see that at 3:15am the line AUInvoking reboot system. It looks like Windows Updates and not SCCM is forcing the restart.
Thanks -
BEx Broadcasting possible windows 7 and Office 2010
Hi guys,
i have a question concerning Bex Broadcasting. We use two desktop Physical PCs with OS XP . The service is running on them. We would like to Upgrade to windows7 and Office 2010. Office 2010 is rolled out on them but windows 7 will be rolled out soon. i have compatibility concerns. The client PCs from where the chains will be exIs Bex Broadcaster working onecuted and also the PCs where the precalculation service is installed and the precalculation takes place will be updated to windows7. Is the broadcaster compatible with that? or are there any restrictions/limitations?
Thanks and regards,
MuratHi and Welcome to the Forums!
Many have had issues, many have had success. The only way to diagnose is with details..."it will not sync correctly" only leaves us to guess. Here are some details that might help:
1) Your BB Desktop Software version -- all 4 octets please
2) Your BB OS level -- again, all 4 octets
3) Your carrier/country
4) What, exactly, happens when you try to sync? Can you configure and not sync? Can you not configure? Are there error messages? Details please to help us to help you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Using hp4500 g510N printer windows 7 & Office 2010 and trying to print envelopes
I can not get the printer to print the envelopes correctly. My latest attempt had thew delivery address appear in the return section of the envelope. I am using windows 7 64bit and office 2010 word
this all looks good.
you might have issues with Office 2010:
SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
it clearly states:
Microsoft Office 2010 with SAP GUI 7.20 will be available as of Net Weaver BI 7.0 front end add-on for SAP GUI 7.20 Patch 200
go get these patches:
Support Packages and Patches - B BI ADDON FOR SAP GUI BW 3.5 ADDON FOR SAP GUI 7.20 bw350gui720_5-20006857.exe
Support Packages and Patches - B BI ADDON FOR SAP GUI BI 7.0 ADDON FOR SAP GUI 7.20 bi720sp03p_301-20006596.exe
also, do not promise to give points. this is against forum rules... but giving them is appreciated. -
BPC NW SP5 with Windows 7 and Office 2010 - issues with EvDRE reports
Hi All,
We are facing a BPC front end issue with the following symptoms:
1. Any report with multiple EvDREs crashes out either instantly or within a few minutes of operation.
2. Two EvDRE reports (or one report and one input tempate) crashes same as above.
The crash is either an EvDRE error message or an endless wait for the server to respond (where we have to eventually terminate the application).
We were suggested to move to sp7 but the issues persisted.
We do have a message and SAP is helping us investigate. What I want to understand from everyone is are there customres successfully using this combination (BPC NW SP5 Windows 7 and Office 2010) along with the above features?
Customer is really loosing confidence in the solution and is eager to find out if we are the only one using this.
Regards
AnupamHi Zach,
While I do understand we need to isolate the problem but testing on different combinations, customer at the moment is not inclined for this and is looking for other customer references that this environment is stable.
Regards
Anupam -
Smartview 11.1.2.1 on Win 7 and Office 2010 32bit
I installed 11.1.2.1 smartview on Win 7 and Office 2010 32 bit. The installation was successful but when I try to open Excel or Outlook I get the error that office encountered a serious problem with the add-in and disables the add-in to proceed. Any suggestions to make this work?
Thank you.Yes in Window 7 and on Vista when installing you have to run as an administrator or disable UAC. Once installed you do not need to run as an administrator. On these new OS's even though you have admin right by default you do not run anything as an admin, this is a good thing but you have to be aware of it. http://technet.microsoft.com/en-us/library/cc709691(WS.10).aspx#BKMK_WhatIs
Glad it is working! -
OfficeJet 4315 no longer works after Win 7 and Office 2010 service packs applied
I've used OfficeJet 4315 on a Toshiba Satellite with WinXP (SP3) and Office 2003 and been delighted with the printer. I recently migrated to a brand-new Acer Aspire with Win 7 and Office 2010 (home & student ed.) At first, the 4315 worked well--in fact, all I had to do was plug in the USB connection and the in-OS drivers installed automatically. However, something has now caused the printer too be essentially useless! I think it happened after I applied SP1 to Win 7 and/or the service pack to Office 2010. I can no longer print Word files (.doc or .docx), Excel spread sheets (.xls or .xlsx), PDFs, Web pages, or even e-mails, The only things I can print are .txt files or equivalent and .jpg files or equivalent. I've tried deleting and reinstalling the printer (including deleting the drivers and reloading them from Windows Update). I don't believe I should have to replace a perfectly good printer just to support Windows 7 and Office 2010. I NEED HELP URGENTLY with this problem! If anyone has any knowledge or ideas, I'd be forever in your debt. (HP, I'd even pay to get the help I need on this one!!) TIA.
Hi,
Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
Did this issue occur with Office files?
I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
My IPAD said to update so I did, it shut down now all that appears is Itunes logo and and arrow with a plug
-
Why cant I get Adobe flash player on My tablet when I Can get Adobe for Android.
I am having no success in downloading adobe flash player to my tablet. I already have adobe player but seem unable to get flash player. How do I get it?
-
JMF; Video watermarking in java?
Can any one suggest me how to proceed for this problem? Input is quicktime file. A watermark should be added to the video track (this can be a small black square in the upper left hand corner of the screen, or something more elaborate). The watermark
-
Universe will be overwritten-designer sdk
Hi there, I have a wierd problem: I am writting a program (using excel 2007 vba-designer 3.1) that basically copies universe elements (such as objects) from one universe to another. It is quite simple, but because of an unknown reason after using the
-
Epson ICC profiles will not install in Mountain Lion
I have an Epson R1900 printer which requiress icc profiles. The generally agreed route has been to use those from Epson of America and these work fine on my PC. On the Mac however only the matte set will install. The glossy profiles bring up an error