Windows 7 don't start on my new Imac ?

I used bootcamp and I used the 64 bit Windows 7 version. After register modifications, starting services and the complete installation indicator is halfway  I get a dark screen and the Imac is off and stays off.
Please be so kind to help me.
Have tried it several times with the same result. Also the 32-bit version.
Have done all the updates and foolowed the bootcap .
So I see the windows startup screen but it goes to black ...
Thanks in advance.
Han

Well, unless you have the 2.1 Universal version, it's not-a-gonna run. The only way you can get 2.1 is to upgrade to Final Cut Studio - which from Motion 2 is $199, but you get everything, Final Cut Pro, DVD Studio Pro, SoundTrack Pro, etc...
If you only have Motion 1, you are SOL...
Patrick

Similar Messages

  • "Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode"  when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

    "Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode" 
    when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

    You should probably post your question on the Parallels forums:  http://forums.parallels.com

  • When I start up my new Imac with my password, it works but after going into sleepmode, I can't go out of the sleep moed with this password

    I did the configuration of my new Imac and entered and confirmed my password when asked.
    When my computer is switched of, I can startup with this password but after going into sleepmode, this password doesn't work.
    The same when I go to "system preferences" users & groups, it's not possible to unlock the lock with this password
    I'm sure that I never used another password.

    If Apple was the one that replaced the ribbon cable, return it. If not, run AHT (Apple Hardware Test).
    Using Apple Hardware Test to troubleshoot a hardware problem
    Your issues might be caused by a hardware problem. Running Apple Hardware Test can help you solve this problem by showing you the faulty hardware.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold the D key on the keyboard before the grey starting screen appears.
    Continue to hold the D key until the loading screen shows up. You should see a globe.
    When AHT has loaded, select your Language and then press the Return (↩) key.
    Select the Perform Extended Testing checkbox located under the Test button.
    Press the T key, select the Test button, or press the Return (↩) key to start running the diagnostics.
    Report any issues it shows in a reply.
    I hope I helped.

  • Windows 7 or 8.1 for new iMac 27 in?

    Just got a new iMac 27 inch about a week ago.  I am new to Mac and still need to have access to Windows for some games and also want to use Office 2013 full MS version.  I have purchased Parallels 9 and am currently testing with Windows 8.1 Preview version.
    Now ready to purchase a full sytem builder Windows version to install and wondering which may be best, Windows 7 or newer Windows 8.1?  Are there that many improvements or new features in 8.1 that i should go with the newest version?  Has anyone else recently installed one of these with Parallels?
    Thanks!

    Just get Office for Mac instead of the Windows version, it doesn't make any sense at all to use the WIndows version. As for your games it doesn't matter what you get, Windoze is Windoze, just be prepared to keep it save by running anitvirus softare and any other tools you need to keep it running OK. Don't worry about the OS X side though, even if the WIndows side becomes diseased it will not affect OS X.

  • Starting with a new iMac, best way to organise photos

    My old computer macbook pro, was overflowing with badly filed photos, projects and files. As I start with a clean slate, my new iMac my question is the best way to be keeping things, I use illustrator mostly for complex surface patterns.  I have photos galore in i-photo, some even have the same auto file number sequence as I use multiple sd cards.  For my photos, should I use bridge, i-cloud, is iPhoto old school now.  I am not going to just dump my old stuff over and want to do it properly, I promise not to be unorganised on my new iMac (promise).  Also, a brief explanation of when you would use Raw, over Lightroom, over Photoshop or visa versa, or is it just a personal choice.  The more I learn about software the more confused I get.
    Thanks & much appreciated
    Regards Vicky

    I do understand the reference to the cloud not being about a specific app. I also understand that you, Vicky, are not quite sure which app to use with your fresh start. I am not sure it is horrible to ask here which app(s), workflow, or organizational system might be best to institute, given access to all the various apps available in CC.
    I am not quite sure what you are doing, or what your previous workflow was, in part because of your mention of Adobe Illustrator for complex surface patterns. Were it not for that, between your title, and your reference to photos galore, I might suggest Lightroom. It is indeed in part a database, with an ability to handle, and organise, a very large number of photos. In addition to good developing and batch developing capabilities, as well as an ability to tag, as well as add to and manipulate metadata on both import and export, I find it useful. Were I to begin using Illustrator more, which I actually plan to do, I believe I'd either lean on bridge a bit more, very likely in conjunction with exported LR files, or see if it were in any way possible to set up AI as an external editor in LR, though at this point I've no idea if that is possible, or desired.
    As to a specific workflow and system of organization, I feel that is quite subjective. For myself, I find myself creating a Library in LR for each Year, (though I could see a pro event photographer creating one for each event), and then importing my SD cards by copying as DNG, embedding the RAW, and setting up the file name to be the YearxxxxMonthxxDayxx_Hourxx24MinutexxSecondxx, with folders created for each month and day. That way, everything is ordered chronologically, even within the OS folders, and the filenames are consistent and unique. I also add metadata for the creator, etc. I then create Collections for each shoot I'm actually focussing on. From LR I can jump to PS or external third party addons, and return after I am done.
    There are specific books and videos out there suggesting efficient ways of organizing and processing large numbers of images, and there is no, one right way. It largely depends on what you are comfortable with, and the way your mind works.
    Best of luck to you; I know I'll need a bit, and a bit of self-discipline to buckle down and institute a consistent system myself.

  • Safari wont start up brand new iMac!

    just unpacked my brand new imac and safari wont start up.
    everything is working fine all the updates are done only safari!

    You've got 90 days of Apple telephone support. You can find the number here.  If in the US the number is (800) APL-CARE (800-275-2273)

  • Motion won't start on my new iMac

    I have a new iMac 1.83 Ghz with the intel core duo and 2 gigs of ram.
    Every time I try to run Motion it takes me to the Welcome screen, where I select "Start with a New Project", then I get the "Select Project Preset". I select somethig (it doesn't matter what), I get the menu up top, then the spinning beach ball of death and then...Nothing. The motion menu at the top goes away and thats it. No error message, nothing. I have reinstalled motion and I still get the same result.
    Thoughts?

    Well, unless you have the 2.1 Universal version, it's not-a-gonna run. The only way you can get 2.1 is to upgrade to Final Cut Studio - which from Motion 2 is $199, but you get everything, Final Cut Pro, DVD Studio Pro, SoundTrack Pro, etc...
    If you only have Motion 1, you are SOL...
    Patrick

  • Windows could not start DBConsole for new database instance

    Hi,
    I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
    I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
    I see the services started for:
    OracleDBConsoleOracleInstance1
    OracleOraDb11g_home1TNSListener
    OracleServiceOracleInstance1
    Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
    However, I got this warning message during configuration:
    "Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
    1. Set the environment variable ORACLE_UNQNAME to Database unique name.
    2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
    To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1 and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
    When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
    I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
    What am I missing here. Please help!
    Thank you.

    968952 wrote:
    Hi,
    I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
    I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
    I see the services started for:
    OracleDBConsoleOracleInstance1
    OracleOraDb11g_home1TNSListener
    OracleServiceOracleInstance1
    Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
    However, I got this warning message during configuration:
    "Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
    1. Set the environment variable ORACLE_UNQNAME to Database unique name.
    2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
    To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1
    Why?
    and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
    When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
    I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
    What am I missing here. Please help!First thing you are missing is showing us what you did. Instead you just described it, and that leaves a lot of room for questions. Copy and paste from a command prompt can work wonders here.
    From a command prompt, enter the following:
    set ORACLE_SID=oracle2
    set ORACLE_UNQNAME=oracle2
    set | sort
    net start
    emctl start dbconsolecopy the entire session, commands and full responses, and paste back here.
    >
    Thank you.Just to take a side road ...
    "I am using the same listener as I intend to use one database instance at any point of time. "
    Doesn't' matter if you use one instance or 100. The listener was DESIGNED to service multiple instances of multiple versions running from multiple homes. It is nothing but a connection broker. A telephone switchboard, if you will. All you need is a single listener, with the default name of LISTENER, running on the default port of 1521. It will handle all the database instances you care to throw at it. More instances than anyone in their right mind would ever put on a single server. Your server will run out of capacity to host additional instances before the listener runs out of capacity to service them. Especially since your 'server' is really just a toy in the Oracle world.

  • External startup disks will not start with my new iMac

    My external devices which are startup disks will not start when connected to my iMac, although it appears in the bootable drive selections after the chime sound, using the option (Alt) key. I get the bootable drive selections and when selecting it all I get is a gray screen with the apple logo and that is it. No matter how long I wait the start up does not happen. I am sure that the external device is not damaged because there is no problem to use it as a startup device when connected to my MacBook Pro.
    Otherwise the devices work as they should. If I connect them to my iMac then they will appear on the desktop, etc. The only thing which does not work is that they cannot be used as startup disks, even though they work fine as startup disks if connected to my MacBook Pro.

    Based on your description it is very hard to tell what is going on.
    You appear to have an i7 iMac. That model was delivered with Snow Leopard (10.6.x).
    My guess is that your external disks may have a version of OS X that predates the version supplied with your new iMac. You cannot run an earlier version of OS X than what was delivered with your Mac.

  • Illustrator cc don't start after the new update

    Illustrator CC don‘t start after I update this. I should loading the font Verdana, but Verdana is activ. What can I do now?

    saure sahne,
    Are all the faces of the Verdana and Tahoma fonts installed and enabled/active?
    Did you receive a message about Verdana?
    Is your OS Mac OSX 10.6.8? If so, you will have to upgrade that or roll back the update. You can see instructions for the latter here:
    http://prodesigntools.com/adobe-cc-version-control.html

  • Having trouble with internet connections using my Apple G5. Updates turn out to be incompatible with my system. What should I do short of trashing the wonderful computer and spending cash I don't have on a new iMac?

    Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
    Chuck's Dilema

    Hi Chuck,
    TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
    http://www.floodgap.com/software/tenfourfox/
    I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
    SeaMonkey seems pretty fast also, with many options...
    http://www.seamonkey-project.org/
    http://www.seamonkey-project.org/releases/
    Might also look into iCab & OmniWeb versions.
    Also...
    The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
    Texas Mac Man's Flash hack/post...
    https://discussions.apple.com/thread/3599648?tstart=0
    Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
    Might be later ones around also... saw 11.3 I think.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    See in each Browser which version of Flash it thinks it has...
    http://kb2.adobe.com/cps/155/tn_15507.html

  • Can I start up my new imac (Snow Leopard) from a Tiger installation disc?

    Last week I upgraded to an entirely new machine. My old imac was running on Tiger and the logic board failed. Though I had an external, I had my local Apple store transfer my hard drive data to my new mac. Since then, I've run Disc Utility a few times, each time with no problem until today.
    Disc Utility is giving me the following error:
    The volume Macintosh HD was found corrupt and needs to be repaired.
    Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
    Since I don't have a Snow Leopard disc, I've tried starting up with my old Tiger installation disc, but to no avail... At the risk of sounding a little stupid, should Apple have given me a Leopard disc with my purchase?

    bgaribay wrote:
    Last week I upgraded to an entirely new machine. My old imac was running on Tiger and the logic board failed. Though I had an external, I had my local Apple store transfer my hard drive data to my new mac. Since then, I've run Disc Utility a few times, each time with no problem until today.
    Disc Utility is giving me the following error:
    The volume Macintosh HD was found corrupt and needs to be repaired.
    Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
    Since I don't have a Snow Leopard disc,
    I've tried starting up with my old Tiger installation disc, but to no avail...
    you can not use the tiger disk. you need to use your snow leopard disk. what happened to yours? every new computer comes with one. it's called install disk one and is packaged with every new computer.

  • Windows don't start after System restore

    Hi. I have a Pavilion dv7 6195-US bought 3 years ago. 
    I have 2 HDD x 500GB.
    There was also a partition with the system restore to factory OS, but I don't remember what I've done and didn't recognized by HP Recovery Manager, anyway, the information is safe...I mean "base.wim".
    For some reasons, I had to formatted and reinstall the windows.
    I backup all my information from my laptop. INCLUDING the image factory: base.wim and the I try to reinstall my windows.
    For this point I found 2 ways on the internet: 
    1: there are 6 steps ( http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Another-System-Restore-question... ) but instead of connecting my hard to another PC, I use the second of my HDD to install a random win7 and to do the 6 steps. I do the exact what is there, BUT after the step 6 and restart my laptop... basically it's stop at the point with "starting Windows and Logo"... If I remember for the first time when I opened, it supose to appear a welcome screen after that...but nothing... just freeze image. 
    Anyway, I don't know WHY or WHAT I got wrong... I try another way:
    2: Here is the stept that i follow but even here nothing happend ( http://forums.whirlpool.net.au/archive/2243985 )
    Please help me out how to figure out a way to restore my factory windows on a formatted HDD.
    There is no problem with my base.wim, I restore it ok with image.exe.... but the only problem is after the restart of my laptop and basicaly start windows for the first time... doesn't work.
    Maybe is because of my partition type or what? Can anyone give me some clear ways to do that.
    Thanks a lot !
    Later edit: I don't remember wich of this 2 ways I try, but after restart seems to work until a grey background appear, ans a cmd start with "startnet.cmd"...then a text 2 seconds, but then restart... and that's it... seems like a problem of restoring windows to factory?

    Hi @Starhitect ,
    Welcome to the HP Forums!
    It is a terrific place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp you are trying to recover your notebook back to factory.
    Following the steps in the first link at Step 6 it states after reinstalling the drive to boot to a Windows CD and do a repair.  Did you do that step?
    I suggest you contact HP support and inquire about obtaining a recovery kit for your notebook and then do the recovery from them.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Here is a link to assist you with that process. Performing an HP system recovery (Windows 7)
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • I want to transfer my Windows files from my Clickfree external drive to my new iMac. iMac recognizes the drive but won't read the files. What should I do? My PC hard drive is dead so I can't hook up my iMac to that.

        I'm switching from Windows to iOS. But my new iMac won't allow me to transfer my Windows files on my Clickfree HD425 over to the iMac. It initialy didn't even recognize my hard drive during set up, so I manually went through Finder where it recognized the Clickfree drive. But my files wouldn't appear. I can't go back to my original Windows computer because the hard drive crashed, and that's why I bought this new iMac in the first place. What should I do? As a Mac newbie who was reluctant to exit the Windows world, I don't want my original babystep into the iOS world soured by my first experience.

    Hi Rick, & a warm welcome!
    In Disk Utility on the Mac, what Format does it say the drive is?

  • T61 Window 7 don't start without power cable

    I have T61 think pad with windows 7 64 bits and windows don't start with the battery only but they start when the electrical cable is plugged.  It's very strange, please help me.

    Try booting to bios screen then insert a fully charged battery and unplug the power, if the laptop shuts off, then you have a motherboard problem, however I would definitely test the batteries in another computer just to make sure they work before you replace your board.
    If it does run off the battery when the power is unplugged, but won't start with just the battery, try removing the battery and ac power and press the start button ten times holding 5 seconds each, then 30 seconds on the last time, then replace power and battery and try again. If that doesn't help you can try removing the cmos battery too and and repeating this step, but in most cases this too indicates a system board failure. 
    Good Luck
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Maybe you are looking for

  • The ultimate media manager?

    I'm looking for something that can quickly and easily manage media such as images, video, audio files.  I have iLife 11 with iPhoto and find it doesn't organize as well as I thought it would.  Finder is too limited and very slow.  I have Adobe Bridge

  • Weblogic 10.3 content management requirement.

    Hi, I have a requirement to pull the pdf from the weblogic content management without weblogic portal configuration. Is it is possible to achive this.If possible please suggest me how to do. thanks in advance.... Uday Sariki.

  • 10.6.2 sees XP, but XP won't see 10.6.2 machines

    So this seems to be the opposite problem of what everyone else is having. We have a leopard and a snow leopard machine that could see and be seen on WinXP as of Friday. Monday, the Snow Leopard machine can still connect to Win XP, but can no longer s

  • Error startsap in AIX5.3

    OS: AIX5.3TL9 While starting the SAP NetWeaver7.1 CE - Oracle(Distributed System) using the "startsap" after login as the user <System Id>_adm. We are getting the below mentioned error. Can anyone help me to resolve this problem. M  [Thr 01] *** ERRO

  • Will WAAS be worth it?

    Hello, We have our headquarters in New York and a remote office in Chennai India. The circuit between the offices is a 10mbps MPLS with a big provider. The performance of web applications is fine. Users start to complain when it comes to Windows file