Windows 7 on snow leopard using boot camp 2.1/2.2 drivers

Hey Forum,
i am using snow leopard on my macbook, and I do not have the snow leopard install disc as I have lost it. I am intending to install windows 7 on it with my old leopard install dvd using boot camp 2.1/2.2 drivers? Can it be done? Ok in summary:
1-I partition my bootcamp using boot camp 3.1 on snow leopard,
2-process of installing windows
3-use my old leopard install dvd to install the drivers.
4-is it possible?
Regards.
Ala.

Hi,
Apple strongly recommends to use the BootCamp 3.0/3.1 drivers for Windows 7 and nothing else.
OSX Snow Leopard install DVDs can be bought at any Apple Store (and Amazon, etc.) for about USD 29
In summary:
1 - Works
2 - Works
3 - Might not work at all or you might have to use the 'compatibility mode' with the 2.x drivers.
4 - Try it
Before attempting you might wanna have/make a backup of your OSX, just in case.
Regards
Stefan

Similar Messages

Install Windows XP in Leopard WITHOUT Boot Camp - No More Disk Error

For those of you having problems installing Windows XP in Boot Camp because of the formatting screen never showing up and then the system restarting with the dreaded:
Press any key to boot from CD .....
Disk Error
Press any key to restart
I too spent many frustrating hours trying to find a solution that worked. I searched these threads, tried many of the solutions suggested here and elsewhere, including recreating the Windows CD without a specific file, using the FreeDOS boot CD (couldn't ever get it to work, though I understand some people have had success), Reinstalling Leopard and trying again, dancing around the laptop with incense three times counter clockwise while chanting the name of my childhood pet... etc.
I FOUND A NEW SOLUTION!!!! A much easier solution!!!!
For anyone who is having this problem and is planning to run virtualization software.
(Something that let's you run Windows from inside Leopard)
SKIP BOOT CAMP ALTOGETHER!!!
USE VMware Fusion to install Windows.
I decided to try a different approach entirely and did a completely fresh install of Leopard (not sure if that was necessary or not but with everything else I had been trying I wanted to clean it up anyhow) and then installed the 30 day trial version of Fusion w/ the unlock key VMware emailed me.
I entered my information and Windows product key into Fusion's "Easy Install" Interface, clicked install, and about 30 minutes later I was browsing around in XP.
I HIGHLY recommend this option for anyone having difficulty with the formatting screen not showing up. I have a Bachelors Degree in Information Systems and still spent the better part of 2 days working on this boot camp problem, including numerous hours with the higher tier of apple's tech support. I suspect that those of us having this problem may have an OEM or systembuilder copy of XP... but that is for Apple to deal with - not me, I have better things to do with my time.
If you are planning to run Windows from within Leopard anyhow, just buy Fusion and to **** with the hassle.
You can go to VMware's website and get a 30 day evaluation copy to see if this will work for you before you decide if you want to purchase it, they will email you the unlock key.
Best of luck, hope this saves someone some time!

For what it's worth, I've used the OEM version (copper disk), Select version (bulk license), and an NFR (partner program) version of XP Pro with SP2 and they all worked. On my MacBook Pro's I use boot camp to split the disk in two, reboot using the Windows CD, and pick the partition to format it.
Apple states that you need a full version of Windows, and the OEM versions are slightly different from the commercial versions, but both should work. On my Mac Pro, I created a 3-disk OS X RAID-0, and left the 4th disk alone. I rebooted with the Windows CD and installed Windows to the 4th disk without Bootcamp at all. Once Windows was installed, I used the Leopard disk to install the Bootcamp drivers. The Mac side has no Bootcamp installation but I can still choose between the volumes by holding down the option key at boot time or by setting the startup volume in the OS X Startup disk preference pane.
The solution to use virtualization, unfortunately, will not work for many situations where graphics are involved. Most current major products, such as AutoCAD, 3dsMax, and so forth, will not run properly or at all without specific DirectX 9 or OpenGL support. To date both Parallels and VMWare do not completely support DirectX or OpenGL.

Cannot install Windows 7 32-bit using Boot Camp

I have one of the new iMacs (late 2012) and I can't install Windows 7 32-bit using Boot Camp. Whenever I try to being the installation using the Boot Camp Assistant, I always get the following message: "Need 64-bit Windows installation USB drive or DVD. Boot Camp only supports 64-bit Windows installation on this platform. Please use an USB drive or DVD which contains 64-bit Windows". I have successfully installed 32-bit Windows on my Macbook Pro that is running the same version of Mac OS X and Boot Camp, but I don't know why on this new iMac it doesn't allow me to. Apple's documentation states that I should be able to install either 32-bit and 64-bit without any problem, but this is not the case here. I can't find anything about this problem/error on the Internet either. HELP!!!

AidenT wrote:
Yes, circumstances do change but if Apple is, as they claim to be, serious about seamlessly migrating what is still a large and dominant market share of users from Windows, supporting 32 bit versions is not a nice to have, but a must have.
I don't see why users have to make excuses when there is a clear shortfall of what is promised.
In other discussions, there is talk of an opportunity for Apple to make a significant impact, as Windows 8 has deviated so much from the comfort zone of traditional Windows users. But to make that change, Macs have to support what is still a primarily 32 bit environment in the installed base.
As for the use of VMs, I had a tough time migrating out of Parallels 6 after an upgrade to Mountain Lion broke compatibility so IMHO it is not a long term solution unless you are happy to hand out $50 every 2-3 years just to support the same functionality.
Use Virtual Box, it's free.
32 bit may have a reasonable user base but it's going away fast, if you must use 32 bit Windows and won't use a VM your choice is limited.
Buy a PC, or buy an older Mac.
The rest of your post is speculative and I won't go there.

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp

Install windows 7 32-bit using boot-camp on snow-leopard

I have Snow-Leopard running on my MacBook. I want to install Windows 7 32-bit Professional. I have already purchased copy of Windows from Amazon. I never'ed install Windows on my MacBook till date, so I don't know what to do, and how to install it.
Please share your experiences of installing Windows using Boot-Camp. I need screen-shots or video that can help me with installation.

Windows 7 requires Mac OS X v10.6 Snow Leopard and the Boot Camp 3.1 Update. For complete system requirements information, see http://support.apple.com/kb/HT1899
The 3.1 update is here http://support.apple.com/kb/DL996
The 3.2 update is here http://support.apple.com/kb/DL1333
Here's a couple of sites that helped me when I used Boot Camp to install Windows XP.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup.pdf
http://www.askdavetaylor.com/how_do_i_install_windows_xp_on_my_mac_using_boot_ca mp_1.html

How to acces my HFS+ pertition with snow leopard in boot camp windows

Ive recently installed Snow Leopard on my mac, I also have windows 7 installed in a boot camp partition, I wnt to know if the support for the HFS+ file system in boot camp 3.0 supports windows 7 or ist only for vista and XP, because I cant see my Mac OS X drive when I boot from windows.
Do I need to change something from boot camp or Mac OS or is it supposed to work with any interaction from the user?

you need to install the new bootcamp drivers from windows. boot into windows, insert the snow leopard DVD, open it and follow the instructions.

Installed Snow Leopard, now Boot Camp is Gone?

Just installed Snow Leopard on my Intel iMac using the Mac Box Set. I installed it on the Mac partition that already existed. The other partition is my Windows XP partition. The iMac no longer offers the choice of logging into OSX or Windows as it used to - now it just loads right into OSX. I tried to use Boot Camp Assistant, but immediately got a message that I must update my computers Boot ROM firmware before using the assistant. HUH? All Apple software updates have been done already.....what's going on here? What do I do?

I am having a similar problem. I just purchased a new Macbook running Snow Leopard and I can't find Bootcamp anywhere on it. This is my first Mac, but I was told it should be installed with the OS. I popped the Applications DVD and OS DVD into the drive but couldn't find an installation option for it there either. Wasn't able to find any download on the website, so this is beginning to frustrate me. Same issue? What's the deal? Any help is appreciated.

Need Working Drivers for Macbook 2,1 running Windows 8 (64-bit) using Boot Camp 5 (Mountain Lion)

So I found my old Macbook 2,1 on Leopard the other day and decided to make it my dedicated Windows computer. I wanted to run Windows 8 on it, so I figured out I needed Boot Camp 5. Then I realized Boot Camp 5 only runs on Mountain Lion, so I went though the process up updating it (had to use MLPostFactor since it's techincally unsupported on my mac.) After getting it updated to Mountain Lion, I went and used Boot Camp 5 to install Windows 8 64-bit. However, when I try to load any Boot Camp Driver Files (I've tried the drivers for BootCamp 3, 4, and 5) it says it is unsupported on my computer model. I suspect this is because of the fact that Windows 8 shouldn't be on my computer. Without these files, I can't right click, among other things, which is pretty important. Can anyone help me get these drivers loaded?

According to the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
Your Macbook 2008 does not support Windows 8.
Mac model
Windows 8
64-bit
Windows 7
64-bit
Windows 7
32-bit
Windows Vista
64-bit
Windows Vista
32-bit
Windows XP
32-bit
MacBook (13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook (13-inch, Late 2009)
4
4
DVD
DVD
DVD
MacBook (13-inch, Mid 2009)
4
DVD
DVD
MacBook (13-inch, Early 2009)
4
DVD
DVD
MacBook (13-inch, Aluminum, Late 2008)
4
DVD
DVD
MacBook (13-inch, Early 2008)
4
DVD
DVD
MacBook (13-inch, Late 2007)
4
DVD
DVD
MacBook (13-inch, Mid 2007)
4
DVD
DVD
MacBook (13-inch, Late 2006)
4
DVD
DVD
MacBook (13-inch, Mid 2006)
4
DVD
DVD

Cannot get Magic Mouse to work in Windows 7 64-bit using Boot Camp

I recently purchased a Magic Mouse and installed it on the Mac OS X partition of my MacBook Pro. After successfully installing on the Mac side, I switched to Windows 7 Ultimate 64-bit using Boot Camp to install on the Windows partition. When I try to "Discover" a new Bluetooth device, the Magic Mouse does not show up in the list of devices (the mouse is powered on and next to the computer).
I am using the most recent version of Boot Camp (3.0.2) and have updated Windows 7. Has anyone else experienced this problem? If so, is there a fix for it?
I appreciate any help!

OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

Using osx snow leopard with boot camp, optical drive keeps ejecting windows 7 disc

Upgraded my late 2008 macbook pro from leopard to snow leopard. Added the max 4GB of RAM and replaced the working 250GB hard drive with a new 1TB hard drive. Rebooted with time machine from external hard drive. Now tried setting up Bootcamp to add a Windows 7 partition, but the optical drive keeps ejecting the Windows 7 disc after it spins for a few moments. The optical drive will read other discs, just not the Windows 7 disc. How do I fix this problem?

you need to install the new bootcamp drivers from windows. boot into windows, insert the snow leopard DVD, open it and follow the instructions.

Mavericks upgrade from Snow Leopard broke boot camp. Help!

Since Apple made the newest version of OS X free, I decided to upgrade my 2010 MacBookPro from Snow Leopard. The installation seemed to go fine, but after the installation, I can't boot into my Bootcamp / Windows partition. From what I have read so far, others have experienced this issue upgrading from Snow Leopard to Mountain Lion because the recovery partition apparently messes up something fragile between the MBR (Master Boot Record) and the GPT (GUID Partition Table). I'm not sure if that's what's going wrong here or not.
When I attempt to repair /dev/disk0s4 via the GUI Disk Utility, I get the following details:
Verify and Repair volume “disk0s4”
Checking file system** /dev/disk0s4
Invalid BS_jmpBoot in boot block: 6e0020
Volume repair complete.Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Here's a screen shot:
http://imgur.com/6XLYMOM
Well, I can't mount the partition to copy off my files, and I just want to be able to go back to using my windows partition normally. So I started Googling and found several different threads, but so far I'm a few hours into trying to get my system back, without a clue as to what the right fix is.
Upgrading the OS on one partition of a HDD shouldn't completely break another partition. Is my case just a freak accident, or is this a serious flaw in the upgrade process? Sifting through 250GB of data (1/2 my laptop drive) is going to take some of these tools a while... I'm not a happy customer today.
Aside from spending upwards of 12 hours reinstalling Windows and the dozens of other applications and data files from backups and recovering all the files that I can, does anyone know of any tools that can recover the lost partition should I find it? I'm going to leave testdisk running over the disk while I sleep to try and find filesystems.

I had Windows 7 64-bit installed, but the version is irrelevant. The problem here is that *something* Apple's installer did damaged my working computer. The fact that it damaged others as well and apparently hasn't been fixed since the release of Mountain Lion is very disappointing. Boot camp is a supported Apple product, and we pay a premium for Apple's computers so we should expect better than for an upgrade to blithely destroy our data and tools leaving us to spend days restoring. That's no upgrade. It's a minefield. I'm happy if some good comes from my sharing and it helps others make better decisions than to trust the installer not to screw up their week. Make sure you back up your whole disk image before installing. The upgrade is only free if your time is worthless.
I'm still looking for an easy fix to this problem. The disk scanning software I'm running now is taking a long time to search through the 500GB HDD for information. I fear that the addition of the recovery partition wiped out my NTFS partition's file system entirely. It's inevitable that I haven't backed up all my stuff and that I have lost some amount of data in addition to my time.

5 year old Imac running Snow Leopard with Boot camp.

My IMac will not boot up when I turn on?
The grey apple logo screen and Apple Jingle occurs but I get no desktop or Finder Window and the computer turns off after about 5 minutes of trying to start up.
I inserted Snow Leopard Start Up Disk and tried running Disk Utility - however the Internal Hard Drive is not accesible and shows as being unmounted.
Furthermore - there is NO Start up Internal Hard Drive to reinstall the Snow Leopard OS to.I see my External Drive and Boot Camp partition ONLY.
Could this be a Hard Drive Failure?
However, when I turn the Computer on and Hold the Option key I have no issue booting Windows via Boot Camp and running Windows XP?
What can I do to resolve this?
I would be so greatful for any help to solve this issue.

It looks like your OS X partition is damaged, but not the hard disk. Although your OS X partition is unmounted, you can select it and repair the disk from the Mac OS X DVD. If it doesn't work, you will have to erase the OS X partition and reinstall OS X

Does Snow Leopard Affect Boot Camp?

If you have a Mac with Leopard on it, and a Boot Camp partition with Windows XP, is it safe to upgrade Leopard to Snow Leopard? What I'm saying in, will it affect the Boot Camp partition at all, or will that be left untouched?
Basically, I want to know if there is any chance Boot Camp won't working properly, after upgrading to Snow Leopard.

Reuben,
Installing Snow Leopard will have no effect, as has already been stated in this thread. However, there are new Bootcamp drivers in the DVD One of the nice things about them is they bring HFS+ support to Windows. In other words, you can now access your installation of OS X, but as read only (to prevent Windows viruses messing with the "Mac side").
Scott

Adding windows to MacBook Pro using boot camp and external USB SuperDrive

I attached my Mac SuperDrive to my MacBook Pro and inserted the disc to add windows. The disc shows up on the screen. Went to boot camp to install and after I chose the percentage of use, press continue, it says no USB drive recognized. What do I do? Tried all USB ports with no luck

The Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

Windows 7 on snow leopard using boot camp 2.1/2.2 drivers

Similar Messages

Maybe you are looking for