Windows 7 Pro not finding network connections after boot camp installation. Is there something special we have to do to get the network (wired and wireless) set up?

Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?

tim-bob wrote:
Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?
If you haven't yet installed the Windows Support Software, that's probably why, so install it now.

Similar Messages

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

Lbo51380 wrote:
cant find an itunes app for my laptop. is there something i can get that will help with this?
Go here -> http://www.apple.com/itunes/download/

Cannot obtain network connection with Clear modem. Is there a special trick to get beyond the blinking amber light?

My connection follows this chain:
Clear modem to telephone router
telephone router to network router (in this case I am attempting to set up the AirPort Express in this place).
so I have opened up the Airport Utility and didn't have any luck with getting the Network Connection to turn green and subsequently the AirPort Express is not completing the handshake with the network to get fully connected.
I've gone back to a Netgear router in the meantime and that gets the conection right away. I have only Mac computers connecting to the router and one Epson printer that will connect wirelessly.
Any advice or experiences with this setup would be appreciated. Thanks.

I got the support I needed directly from Apple. It turnsout to have had zero to do with Clear. I had named the new AirPort network the same as the previous network and we concluded that it was making the new settings confused. I did a hard reset, renamed the network to a completely unique name and we were off and running. Thanks Apple!

Imac will not turn back on after being unplugged. Is there something I can do?

imac will not turn back on after being unplugged. Is there something I can do?

SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.

In trying to configure a PXI-8320, is there anything special I need to do to get the 8320 to appear in the display window of T&M Explorer?

I have a PXI-8320 card I'm attempting to use as a PXI bus controller. According to the manuals, configuration of the 8320 is accomplished using T&M Explorer. When I go into T&M Explorer, other installed interface cards are shown, but not the 8320. Is there something special I need to do to get it to come up so I can configure it?
System Info:
OS: Windows NT
The 8320 is installed in the first slot of an external CPCI backplane, and connected by cable to the PCI-MXI-2 board, which is in a PCI slot in the PC.

Gerbera-
MXI-2 is designed to connect your PXI or PCI system to a VXI controller. It is not designed to act as a PXI controller.
MXI-3 is the system that we have developed to control your PXI/cPCI system with a desktop computer or another PXI/cPCI system.
Trey Hamilton
Applications Engineer
National Instruments
http://www.ni.com/support

Windows 7 - Blue screen of death after Boot Camp install

Hello! I have done some searches with no answers, so...
After installing Windows 7 from scratch I then install Boot Camp 3.0 which then leads to the Windows blue screen of death upon reboot. I then have to recover Windows to the previous state prior to installing Boot Camp.
Help!?

Most likely, Apple HFS read-only, which is AppleHFS.sys and AppleMNT.sys - rename those and see.
You might want to run chkdsk after all this to make sure there are no errors with the drive and file system.
Windows Explorer will not accept HFS+ filenames with special characters and will "green bar" and hang when it does, too.
The faulty HFS driver is a valid concern.
Rename AppleHFS.sys and AppleMNT.sys
By doing the following you will disable HFS mount / read mode on windows XP, Vista, 7.
Navigate to c:/windows/system32/drivers/AppleMNT.sys, rename the AppleMNT.sys file to something like AppleMNT_keep.sys or something of your likings.
The faulty HFS driver is a valid concern. It seems to happen on many systems.
You find it in Windows/system32/drivers/AppleHFS.sys
Renaming to AppleHFS_disabled.sys will avoid the blue screens until you have found another solution or Apple updates Bootcamp 3
After renaming both myself because they are no longer "*.sys" or something? they are gone. In my case AppleHFS prevented Windows Backup from running to end and was causing error "some files skipped" and while some might find reading convenient, I prefer Windows not have even read-only access.
You can probably do better with MacDrive, or probably Paragon's HFS driver, to read AND write if needed, to HFS from Windows.

Windows 7 Start-Up Sound deleted after Boot Camp 3.2 Update

Hello,
i´ve installed Windows 7 on my MacBook. Than i have updated my Boot Camp Software from 3.0 to 3.2.
Now is my Start-Up Sound deleted.
How can i repair this?

Install the audio driver from the vendor, does it use Cirrius? or RealTek? you need to install an audio driver or package, Boot Camp just provides hardware device so it can be installed later by the end user.
My Mac Pro uses Realtek and easy enough to install, though I've read here that people had trouble on Macs that require Cirrius. But it is up to you.
Apple Boot Camp: "Cirrius Logic"

Windows takes an obscenely long time to establish a network connection after booting

Often, when I reboot my machine for whatever reason, it boots up normally, I log in, it shows my desktop, loads all the icons and then takes upwards of 5 minutes or longer for the networking icon in the taskbar so show that I have network access (shows that
little blue ring). Now, normally I wouldn't think this is much of a problem since I've found a blog at one point detailing how to change the address it's using for that confirmation. However, in this case, I'm unable to use (m)any other windows
services until it decides I'm connected.
For instance, I'm unable to open the registry editor - I'll open the start menu, search for regedit and run it, but will no longer be able to use the search tool in the Start menu until the registry editor appears and that won't appear until the network
configuration decides I'm connected. If I open a browser (doesn't matter if it's Firefox, Chrome or IE), I'm unable to visit any sites - they say I'm not connected. I'm unable to open the Network and Sharing center at all - if I try to left or
right click the network icon in the taskbar, nothing happens. If I try to visit the Network and Sharing center by typing the address in a folder window, it simply never loads until that icon shows I'm connected.
In other words, my computer is pretty unusable until Windows decides I do have an internet connection. A little about that - I've had this problem for about a month now and have experienced it while connected via wire to two different routers (Netgear,
now Linksys E3000). That doesn't seem to be the problem. My connection is perfectly fine at all other times except when my system boots (so it shouldn't be the wires) and I've both kept myself updated with all the latest Win7 patches and firmware for
the netword card + other system components. Oh, and no other computer on my network has this networking issue.
My system is running Windows 7 Professional x64 SP1.
Any thoughts? Thanks in advance!

Maybe try this, i am not sure that it will resolve the problem, but it is worth trying anyways.
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/eef49e64-157c-4082-8e80-52e48309691f
Hi All,
I've seen this problem multiple times, especially with Windows 7 64-bit versions and Enterprise edition. The source of the problem appears to be the Bonjour service that is installed in the background and set to "Automatic" when installing certain 3rd
party applications. Apple applications like iTunes and Adobe applications like Acrobat Professional and Creative Suites have been known to cause this problem. I've also seen virtualization software like VMWare and VirtualBox cause similar issues
with network adapters.
The solution in most of the cases I've come across has been to stop and disable the Bonjour service. The Bonjour service also masquerades as a service with a name of the format "##Id_String1.6844F930_blahblahblah". Here's how to disable this service
in Windows 7:
Right-Click on Computer > Select 'Manage'
Expand the 'Services and Applications' section in the bottom of the Left-Nav dialog and Select 'Services'
Sort the Services list by name and look for either "Bonjour" or the "##Id_String..." name mentioned above
Right-Click on the service and select 'Properties'
Click the 'Stop' button to stop the service
Select 'Disabled' from the 'Startup type' drop down list
Click 'Apply' and then 'OK'
Reboot your machine and see if the "Multiple Networks" issue is resolved. If so, you should have internet connectivity again.
Hope this helps.
cheers,
Aaron

MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

     Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
      After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
     After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
     The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
     At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
     Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Can not boot into OSX after boot camp installation and resizing of Macintosh HD

So from the beginning what I was trying to do was set up my iMac (27-inch, Late 2013) with boot camp so that I could play some old windows based games that can not be played in Parallels.
I went through the Boot camp process and everything set up just fine.
I had both OS X Yosemite 10.10.2 and Windows 8 Professional running but as I was installing games on to boot camp I discovered I did not allocate enough space and needed to extend the Boot Camp partition.
I used boot camp utility to set OS X as the default start up disk and had it restart
I launched into OS X and used Disk Utility to shrink Macintosh HD another 120GB
Restarted again holding option and launched into Windows
Used the disk management in windows to try and extend the boot camp partition into the unallocated space.
It was not an option to extend it so I tried to create a new simple volume from the unallocated space then delete it and try to extend it again.
It still was not an option.
From there I went to restart again while holding option and the only options I had were 10.10 Recovery and Windows
I tried using disk utility in recovery and Macintosh hd now only showed disk0s2
I tried to verify and it could not verify
I tried to repair and it could not repair.
I put the iMac in target disk mode and using a thunderbolt cable I tried using disk utility from my MacBook Pro (13-inch Mid 2012)
Verifying volume “disk2s2”Verifying file system.** /dev/rdisk2s2
Invalid BS_jmpBoot in boot block: 000000
File system check exit code is 8.Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “disk2s2”Repairing file system.** /dev/rdisk2s2
Invalid BS_jmpBoot in boot block: 000000
File system check exit code is 8.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
This is the same error I got on my iMac
I used terminal diskutil list and got:
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:       Microsoft Basic Data                         799.3 GB   disk2s2
   3:                  Apple_HFS Recovery HD             650.0 MB   disk2s3
   4:       Microsoft Basic Data BOOTCAMP                70.3 GB    disk2s4
I can see that Macintosh HD was disk2s2 but it now shows its Microsoft Basic Data.
I did not format this partition and it was working fine till I restarted the computer after resizing Macintosh HD.
I am not sure what I can do to fix this.
I've found multiple articles about similar issues, but the issue thet they have was that they could not boot to Windows instead of my issue not booting to OS X

****************    Update    *****************
From the Windows Partition using Disk Management I can see that the drive is still labeled Macintosh HD and that all of my data is there.
I have a complete backup so i'm not worried so much about the data.
What I'm most interested in is trying to solve this issue because I'd like to continue using boot camp and I actually work with mac computers and would like to be able to help others if this issue arrises again.

Windows 7 Black screen with cursor after boot camp partition

So I realise this is a problem that was plaguing people a few years back. So I'll go from the very start.
I've downloaded a copy of windows 7 professional 64bit from the Microsoft website. My optical/CD drive isn't working, so I've been unable to use it
to install windows. I decided I'd try booting from my USB. So I have the ISO file and formatted my USB and I've downloaded the latest drivers for boot camp assistant on my mac (version 5.0.4) I'm up to date with every update for my mac. Now, I do realise that Apple doesn't recommend using a USB to load windows, but I watched this http://www.youtube.com/watch?v=8z1gqw0ougo and it explained how to get the checkbox up when you're in boot camp so you can run from your USB.
My problem now, is that straight after I have partitioned my hard drive, it goes on to install windows but upon restarting it reaches "the black screen of death" with just the white cursor blinking. I've tried multiple times and keep getting the same result. I've even tried what Apple suggested and only have one USB device plugged in http://support.apple.com/kb/TS4536
The details for my mac are as follows:
Model Name:
iMac
Model Identifier:
iMac10,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
3.06 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
IM101.00CC.B00
SMC Version (system):
1.53f13
Serial Number (system):
W800992A5PE
Hardware UUID:
A108E54E-3C53-5AF8-BFDF-2CF7ED567A74
and it's a late 2009 model.

I have solved this issue now but seem to have encountered another one. I solved the above issue simply by keep on trying time and time again, partitioning the hard drive and trying to install windows 7.
Anyway, I have encountered this error: windows setup could not apply the configuration set. The WINDOWS folder cannot be found.
Please help!

External HD "Not Readable" after Boot Camp Installation

After installing Windows XP on my Mac, I switched back over to OS X and tried to access my external hard drive which greeted me with the message: "The disk you inserted is not readable by this computer." I assume that the Boot Camp process must've affected the external drive and made it incompatible with OS X. The external does show up in Disk Utility, but there are no options to repair the disk, only erase. Can anyone tell me how to reformat the drive, without losing all of the precious data on the disk, for OS X?

XP can't see Mac OS file system.
There is your drive, and your volume_name on the left side column. You have to click on volume_name and select the tab for Repair.
Best to backup before installing or updating any OS, and leave everything you don't need disconnected.
I doubt anything changed, should not have.

Gray screen during startup after boot camp installation

I cannot either Mac and Windows t start on Mac Mini after I updated with Windows7 on Bootcamp.

Hi there Sudarshan21,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

After Boot Camp installation, Kernel Panic when launching OSX partition

Hey guys. I have a mac mini (early 2009) with Mac OSX 10.6.2 running. I installed XP Professional Sp3 using the Boot Camp Assistant with no errors. It works fine. However, whenever I launch the OSX partition, even in single-user mode, it Kernel Panics. What can I do to stop this?
I have a legal copy of XP and OSX, by the way.

this does not sound like a problem with anything on your drive then but rather a firmware issue. just to make sure, how are you booting from the DVD? reboot and hold "c" at the chime. any luck? if not reboot and hold option at the chime. this ought to boot you into startup disk manager where you can choose what to boot from.

No network adapter or drivers seen in windows 7 after Boot Camp 5.0.

Mac Book Pro (newest). I Did a boot camp install of windows 7 home premium. Allowed 76 Gigs for that partition. Thought that would be enough. Did just fine. Got all done and I cannot access the internet wifi or eithernet in Windows, when I trouble shoot with network diagnostics in windows it states no network adapter present, let alone the drivers for that adapter. I thought Boot Camp 5.0.1 did all that for you. There was no instruction to install drivers to a disc or thumb drive. Whent back to the MAC side and made shure I was sharing eithernet and wifi. When i do select share eithernet and WIFI I lose internet on the MAC totally. I am about to lose it. I've been looking all day for the solution. Can someone help me.

It appears you did not read and follow the Bootcamp Installtion Guide. The guide was the first menu item when you started Bootcamp Assistant. You did not download the Windows drivers when you ran Bootcamp Assistant. You then did not install these downloaded drivers when you first stated Windows.
Start Bootcamp Assistant again. Select only the menu item to print the Bootcamp instructions. Read, and follow the instructions.

Windows 7 Pro not finding network connections after boot camp installation. Is there something special we have to do to get the network (wired and wireless) set up?

Similar Messages

Maybe you are looking for