Windows 7 x64 will not boot with memory upgrade (P6N SLI Platinum)

I recently bought 4x 2GB sticks of Crucial DDR2 memory. I originally had Windows 7 x86 installed, and with all four sticks in place there was no problem (except the memory limit for x86). All 8GB of memory registered fine though.
I decided to install the x64 version, but setup would hang at every step and installation took over 12 hours - Windows 7 would not boot either when it was complete. I removed all but one of the 2GB sticks and everything installed fine and it's up and running now. If I put the rest of the sticks back in, Windows begins to load but gets stuck at a black screen. I've swapped each 2GB stick in my system and they all work as long as only one is inserted at a time.
MSI P6N Platinum SLI (v1.7 BIOS)
Windows 7 x64 Ultimate
Intel Core 2 Quad @2.4GHz
4x 2Gb Crucial DDR2 @ 800 MHz
NVidia GeForce 8800 GTS 640Mb
I've done some google searching, and it seems like other people are having the exact same problem with the P6N boards, but I've never seen any solution...

The memorycontroller on that board is an oldie, got one myself and it will probably not run @800MHz with all slots occupied on a x64 OS.
That contoller is only rated for 667MHz when running all channells fully occupied.
The fact that you could run it so under x86 has probably to do with the fact it didnt adress all the memory, but only 3.25GB max and thus it was stable enough.
Now you are running an OS that uses all memory and thus it can become unstable while its running at a too high speed for the controller.
I had the same and could "only" get the memory to work @750MHz tops, before it decided to BSOD or bootloop on me.
This is inherent to its design (from NVidia, they made the chipset) and cannot be overcome, but dont worrie yourself, the speeddifference between 667MHz and 800MHz is negligible and will only show up if you run benches, in normal day to day use, you will hardly, if ever, notice it.
But, do you really need 8GB???
If you do gaming, internet, office and other "light" work, i.e. normal homeusage, 4GB is already more then enough.
8GB is nice if you use cad/cam, photoshop and other memory intensive stuff.

Similar Messages

MBP15 1.83 GHz Will Not Boot With 3GB Upgrade

I'm trying to increase my MBP's ram to the 3GB limit. This is a 1.83 GHz 15" model.
It will not boot with 2GB & 1GB sticks of identical mfg & specs. It will boot with one or the other...
Any ideas?
Thanks,
Stradioti

Hi
according to the Apple specs for the 1.83GHz mbp's - 2Gig of memory is the limit......
512MB (single SODIMM) of PC2-5300 (667MHz) DDR2 memory on 1.83GHz configuration; and 1GB (single SODIMM) on 2.0GHz configuration; two SODIMM slots support up to 2GB
Crucial Memory says the same.

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

More detail and a reply for the CQ50 - 130US will not boot with 8gb ram post

The specs, on the web site say that the max memory supported is 3GB DDR2 because the notebook was built with the OS Vista(32 bit) installed so that’s why the manual has the 3 GB max. memory supported limit. The 32 bit OS can’t address memory over 3.12 GB. To my mind that is not a spec. but rather a tech. writer who made a mistake and copied the sales literature. With Windows 7(64 bit) Pro. installed the OS can address up to192GB of memory if the system supports it. Other Compaq and HP Notebooks can deal with 8GB of memory installed. That’s why I would think HP’s could easily fix this with a patch or use one of their other BIOS’s.
The difference between 4GB and 6GB is that with 6GB system runs faster and the display quality has improved. I have set the cache size to large and the executive paging is set to off in the registry. The menu(System Properties - Performance Options – Advanced – Virtual Memory) is set to automatically manage the paging file size.

You should keep it in the original; thread you started.
http://h30434.www3.hp.com/t5/Notebook-Hardware/CQ50-130US-will-not-boot-with-8gb-ram/m-p/490157

Windows 8 will not boot

Windows 8 will not boot, gives Bad_System_Config_Info error.
It will not boot from disk, let me refresh, or let me reset my windows system.
A couple of times i have gotten windows to boot from the disk and it asks if i want to instal windows 8 or there is a tab to repair my computer.
Should i just go ahead and click instal windows 8, and then backup that fresh instal with my backup drive?
Or will this complicate the problem?.........
I am running OS X 10.8.3 Macbook pro retina
Thanks
Todd

Wow, how about you guys just answer the dude's question instead of posting useless garbage. thanks for wasting everyone's time.
The only way I know of fixing this right now is unfortunately by doing a clean install. Thats not to say however that you won't run into the same problem down the road. To be honest, even tho Templeton's answer was useless, he's right. Seven is currently way more stable.

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.

What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

HP G62 Will Not Boot With Power Cord Plugged In

I have an HP G62 laptop that is about four years old. I've had a couple of problems with it before that were resolved relatively satisfactorily, however five or six months ago I started having a new issue. The laptop will not boot with the charging cord plugged in, whether there is a battery in it or not. Nor will it return from sleep mode (screen black, status light on the power button flashing) with the charging cord plugged in, whether there is a battery in it or not. It simply shuts down and I end up with an error screen the next time I boot up. I have tried other charging cords and it has been the same, however the cord will still charge the battery. This means I have to charge the battery, unplug the cord, boot up the computer. This annoyance is worsened by the fact that the battery is old and unable to hold charge for very long at all and I fear one day even the battery won't be enough to boot the computer.Can I fix the power cord issue? Should I buy a new battery? Or let my computer give up the ghost and scrounge for a new one? Any help would be greatly appreciated.

the charger input could possibly need replaced and/or the charger

T61 will not boot with nvidia quadro 140m driver

Hi all,
A couple of weeks ago, after allowing MS update to install some FTDI driver updates, my system will not boot up and hangs shortly after the initial vista loading screen. The screen goes black with some HD activity and eventually reboots. After trying a couple of restore points with no luck, I started to remove the latest driver updates and other software to my system again with no luck.
If I uninstall the nvidia driver and use the Standard VGA driver, it will boot and come up properly. I've done a bunch of web searches and searches on this site and can't find my exact circumstances. Its hard to believe that it could be a hardware issue since it started after a software update, but since it hasn't been a problem for anyone else, I'm just not sure at this point.
I've tried earlier versions of the nvidia driver, removing other drivers and services trying to find a coincidence, but nothing seems to work. I'm kind of at a loss at this point. Does anyone have some suggestions?
Thanks in advance,
Dave

More info on my system:
OS Name    Microsoft® Windows Vista™ Business
Version    6.0.6001 Service Pack 1 Build 6001
System Model    6459CTO
System Type    x64-based PC
Processor    Intel(R) Core(TM)2 Duo CPU     T8300 @ 2.40GHz, 2401 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date    LENOVO 7LETC5WW (2.25 ), 11/14/2008
SMBIOS Version    2.4
Installed Physical Memory (RAM)    4.00 GB
Also, does anyone know if using the Standard VGA Display driver without problems on this system means that the video card hardware is working? In other words, I'm trying to rule out a hardware problem with my nvidia quadro 140m card, so if the system works fine with the standard vga driver, would that mean the hardware on the card is ok?
Thanks,
Dave

System will not boot with Seagate 3Tb expansion drive plugged in.

I have a HP Pavilion HPE h8- 1214 Desktop , I recieved a Seagate 3TB expasion drive as a gift but when plugged in, the system will not boot. It turns on but thats it. It never gets to the boot sequence. I have it plugged into the top 3.0 usb slot and have tried all of the other slots as well with no sucess. But if I leave it unplugged the system boots right up. I can then plug it in and it works fine. I have plugged it into my wifes HP All- In- One and it boots fine and works. I have a WD 2TB drive that works fine as well on my system . I have searched Segates support for hours and all they say is to change the boot sequence. Have tried that, no go. What they dont get is no matter what I do if that drive is plugged in it never gets as far as booting and reading the boot sequence. Please help. Thank you!

Hi NcBunky,
Are you using Win 7 64 bit? Did you update the Texas Instruments (TI) USB 3.0 XHCI Host Controller?
I have an H8 1380t PC. Updated the TI USB 3.0 driver and had the same problem.
When booting the PC with the USB 3.0 external drive connected to the PC the PC would not boot. When booting the PC with only the mouse, keyboard, and a USB 2.0 external drive attached the PC would boot. Once booted you could attach the USB 3.0 drive and it worked fine.
Solution was to roll back (reinstall) the TI USB 3.0 XHCI Host Controller to the original factory installed driver.
System now boots with the external USB 3.0 drive attached.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

HP Pavilion dv7-4065dx will not boot with continual blinking capslock

Hi,I have a HP Pavilion dv7-4065dx laptop with Windows 7 64 bit that will not boot up or go to the Bios screen. When the laptop is turned on, you hear the system fan start, power button light comes on, and the caps lock button starts to continually blink once every three to four seconds. The HDD activity light is also on but is solid red with no blinking. No changes have been made to the laptop and it was working perfectly fine just a few hours earlier. I have attempted the hard reset of the computer and reseating of the memory cards, but the laptop still would not boot. Any help on figuring out what is wrong with the computer would be greatly appreciated. Thanks. HP Pavilion dv7-4065dxProduct # WQ861UA#ABA

hp dv7-4065dx caplock key continous blinking the same problem i also faced but do the below step which solved your problem Bios corruption power on your laptop block the fan air through cotton or any cloths 10-15 minutes (after heating) then power off and remove the cloths and power on it should be display visit hp driver and download the latest bios & bios tool first install bios tool and select usb to store connect a pendrive for location after installed then install your latest bios after sometime it will auto reboot and install the latest bios we sure while updating bios power adpator must be connect problem solved........

U310 Windows 7 will not boot or recover

I have a problem with my Ideapad U310 as it will not boot into Windows, nor does the recovery feature work. A number of days ago upon powering on my laptop got stuck on the Windows 7 loading screen. I tried a few more times, including the 'Startup Repair', but there was no change. I still have warranty so I contacted Lenovo support and they called me back. An extra complication is that I live in Japan and bought the laptop here, but my Japanese isn't good enough to discuss computer problems over the phone and Lenovo does not have English speaking staff in Japan. A Japanese friend took the call for me and they suggested going back to factory settings. However, I did not have a recent backup so I wanted to secure my files first. I opened the laptop and made a backup of the most important files from the HDD (voiding the warranty, which seemed quite useless anyway since they don't have a physical address for repairs and all other support is in Japanese). I was then ready to try going through OneKey Recovery. After pressing the button I get three options and I choose the bottom one for the Recovery feature. Then Windows starts loading files ... and gets stuck again on a loading screen.
I don't know how to proceed now. I don't have a recovery CD, nor a disc drive. So is there a way to get a clean install of Windows 7 by USB, given my boot-up issues? Or is there another solution?

Have you tried the one key recovery button located beside the power button (on the side of the laptop)? It is the number1 in this picture: http://goo.gl/Tzsnvx
It should take you to the recovery menu (the one from Lenovo, not Microsoft). This should work as the recovery will wipe your Windows partition and will reinstall everything as it was in the beginning.
Anyway, before opening the laptop, you should have downloaded linux (any distribution was OK) and started it from a USB drive. You could have, then, saved all the files you needed located in the Windows partition.

Resized partition using Disk Utility and now Windows 7 will not boot

Hi,
Hopefully someone can help me!!
I had previously used Boot Camp to install Windows 7. However, I later realised I had not given myself anywhere near enough disk space as I started using Windows for things I hadn't originally planned on using it for.
Anyway, long story short, to solve the problem I uninstalled some applications on my Mac OSX and used Disk Utility to decrease the size of my Mac partition. My plan was then to reboot to Windows and use a Windows application to increase the size of the Windows partition. However - I coudln't even get that far.
Upon decreasing the size of my Mac partition (succesfully) I restarted my Mac in order to boot to Windows. However, I was greeted with a message along the lines of "unable to boot to Windows please insert boot disk and press any key" (I can't remember the exact message).
I was wondering if anyone knows of any way to restore my Windows partition, retaining all of my previously saved files on my Windows disk. It's probably a long shot, but the thought of losing everything I have been working on for the last few months is a sickening one.
What does give me a bit of hope is that, if I click Boot Camp it seems to recognise that Windows 7 is installed as the option that appears is to uninstall it.
Furthermore, if I view partitions in Disk Utility, a "DISK0S4" is listed. However, it's only at 20gb - if this WAS my BootCamp partition previously, it was originally at something around 60gb (I think - either way, definitely bigger than 20gb!).
On top of this, my current Macintosh HD parition is at 260gb and with the DISK0S4 partition at 20.21gb, there seems to be some space missing... I'm hoping this is the files I've been working on over the last few months!
Anyway, I've done some searching on the net and it *seems* that GPT fdisk *might* be my savour. I've downloaded it but have no idea how to use it and don't plan on playing about with it as I could no doubt do some real damage. If it is likely to solve my problem however, I'm certainly more than capable of being walked through what I need to do.
Please help!

Hi Christopher,
I also have problems with Windows rebooting after partition resize trying to reduce Mac side and increase Windows side. I do not see the BootCamp partition labelled as such while running disk utility. The Windows partition shows up when I boot up while pressing the ALT key. However, when I try to run Windows, it says " error loading operatig system".
I also followed instruction and went through to run gdisk successfully. Results towards the end.
What can be done? Windows still does not boot and It shows ? Suspicious MBR at sector 0.
Below is information based on typical questions you ask.
diskutil list
/dev/disk0   #:                       TYPE NAME                    SIZE        IDENTIFIER
   0:              GUID_partition_scheme                        *120.0 GB     disk0
   1:                                           EFI                         209.7 MB     disk0s1
   2:                         Apple_HFS Macintosh HD            78.5 GB     disk0s2
   3:                       Apple_Boot Recovery HD             650.0 MB     disk0s3
   4:                   Microsoft Basic Data                         31.7 GB      disk0s4
sudo gpt -r -vv show disk0
gpt show: disk0: mediasize=120034123776; sectorsize=512; blocks=234441648
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 234441647
      start       size            index       contents
          0          1                             MBR
          1          1                             Pri GPT header
          2         32                            Pri GPT table
         34          6
         40     409600           1            GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 153240016      2            GPT part - 48465300-0000-11AA-AA11-00306543ECAC
153649656    1269544     3            GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
154919200   17628896
172548096   61892608    4            GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
234440704        911
234441615         32                       Sec GPT table
234441647          1                        Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 14593/255/63 [234441648 sectors]Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 172548095] <Unknown ID>
*2: 07 1023 254 63 - 1023 254 63 [ 172548096 -   61892608] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.7
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): r
Recovery/transformation command (? for help): h
WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.
Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 4
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y
Creating entry for GPT partition #4 (MBR partition #2)
Enter an MBR hex code (default 07):
Set the bootable flag? (Y/N): y
Unused partition space(s) found. Use one to protect more partitions? (Y/N): n
Recovery/transformation command (? for help): o
Disk size is 234441648 sectors (111.8 GiB)
MBR disk identifier: "DELETED INFO"
MBR partitions:
Number Boot Start Sector   End Sector   Status      Code
   1                               1    172548095   primary     0xEE
   2           *     172548096    234440703   primary     0x07
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk2.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.

X79A-GD65 (8D) will not boot with 4930K or 3930K

Short version:
My system will not boot but gets stuck at "09 Power on South Bridge Initialization"
Detailed description:
I just bought this system and am when I tried to start it it got stuck at "09 Power on South Bridge Initialization". I have removed everything that is not necessary (gfx-card, HDDs, etc.) and only have the CPU and one memory stick inserted (in slot 1 as per the manual). I have also unplugged and put back all power cables from the PSU several times. I have also tried using BIOS A and B.
As I read on this forum that a BIOS update was needed for IVY-Bridge CPUs I bought a 3930K today to see if I could get the system up and running but it still gives me the same error code.
My board serial number is 601-7760-010B1312109204, assuming it is manufactured 1312 = December 2013.
I don't know the BIOS revision as I have never managed to get past the 09 status code.
Any ideas on what the problem could be?
Bought this monster PC as I have a delivery for a client in need of some RAM-heavy processing, so am really starting to feel stressed out about this by now.
Thanks in advance!
System details:
- MSI X79A-GD65 (8D) X79 S-2011 ATX
- INTEL CORE I7 4930K 3.4GHZ 12MB S-2011
- INTEL 530 80GB SATA SSD MLC RESELLER KIT
- INTEL 530 480GB SATA SSD MLC BULK (4 of these)
- FRACTAL DESIGN INTEGRA R2 750W
- ASUS GEFORCE GT 210 1GB DDR3 PCI-E VGA/DVI/HDMI SILENT
- KINGSTON 64GB 1600MHZ DDR3 ECC REG CL11 DIMM (4X16GB) W/TS (two kits, 128GB in total, don't really need ECC but that's what I could find needing 16GB sticks)

even compared to just 10 years ago sales staff have became really dumb as there just hiring people who do not care about anything as long as they get there cut of a sale (usually all they know is basic Consumer parts they stock) and nearly non of them unless they specialize in that level of equipment will have 0 idea what they work with on a pro level part (ECC memory tends to be used on servers and Professional workstations so if they do not use that type of gear then they probably have no idea what ECC really is at all)!
also in that time some major things have happened especially with computer parts like the memory controller moved from the Chipset to the CPU same with the SATA controller , onboard GPU (thats now on the CPU and some have it some don't) and alot of other things and I guess that the people you dealed with had no idea the memory support has very little to do with the board (all the board can do is have BIOS Timing sets now and lists of parts it supports) and is now to do with the CPU alot more as it has the important stuff on it (there very close to a SOC (System On Chip) now)!
if you plan on building another computer remember to do some research yourself before you get a CPU as it is nearly the most important thing of all and they have different features tied to them and do not expect sales guys to have a idea unless there also a Technical support staff member too and work on computers that are of the same class your trying to make and have at least used the same level gear (usually if your doing something like that find a friend who is a computer nerd tell him what your trying to do and get him to help you choose all the parts)!
let me know how it goes when you get the Xeon and have it installed?

External Firewire Drive Will Not Boot with 10.5.1

I have a Intel Mac Mini and I tried to install Leopard onto a external Firewire Drive. I have done this with 10.4.11 and all works well. The Mac Mini is running 10.5.1 on it's internal drive. I attached the Ext FW drive 320 GB and formatted it using 'Disk Utility' GUID format. I next installed 10.5.0 on the Ext FW Drive. I can shutdown and reboot with 10.5.0 using the firewire drive as the booting drive. I next installed the 10.5.1 update and when it completes it requests a restart, I restart it and it never boots back up just the Grey-Apple screen.
I have left it sit for a long time in this 'trying-to-boot' mode for a longtime because I know 10.5.1 may restart more than once on initial install. but nothing. I have also tried partitioning the drive into 3 40-80-180GB drives, but still the same behavior.
Any suggestions?

Went through the motions on that. No positive results. I'm starting to suspect either the enclosure or one of the latest updates.
This what I have found to date.
The Enclosure " Vantec NexStar 3" extrenal USB 2.0 and Firewire. Model NST-360UF-BK
The Drive Seagate Barracuda 7200.10 320 GB IDE Drive
I tried 10.5.0 on an Intel Mac Mini. (GUID format) It boots ok. Install 10.5.1 manually downloaded or automatic it will install the update but will no reboot.
(this part I have to verify a second time) tried the same enclosure on a G4 . I attached the drive formatted it for a PowerPC install and boot. Installed 10.4.10 but not the latest security updates, JAVA, and QT. It will boot ok from the external FW drive. I next install the latest Updates via the update app in the Systems Preference window. After doing the updates for 10.4.10 it will not boot.
So I'm suspecting either the enclosure or the latest updates

Windows 7 x64 will not boot with memory upgrade (P6N SLI Platinum)

Similar Messages

Maybe you are looking for