Windows 8.1 Data reordering issue with Intel Adaptors

According to Intel, there is a data reordering issue with their adaptors and probably this dumb WIDI software. This is from Intel site. they say some are fixed, "A future Windows 8 fix will address this issue for other Intel wireless adapters." I
have one Nope, still broke. I get drops all the time. Brand new Toshiba laptop I7 16 gigs of ram and a SSD and a 2 gig Vid card. Would be nice to be able to play games but I get dropped all the time. Now would Microsoft quit hiding
about this, and fix the darn thing. Also i'm a system admin for 13 years. I have build over 1000 PCs and servers. I know bad software. Please fix this. PLEASE. Its not going to just go away and its not just Toshiba, I have seen other companies with the
same problem. If there is a Fix PLEASE POST IT. Or even a workaround I have tried everything.
http://www.intel.com/support/wireless/wlan/sb/CS-034535.htm

Hi,
Have your first tried the software fix under this link for your network adapter?
http://www.intel.com/support/wireless/wtech/proset-ws/sb/CS-034041.htm
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
Also, you can try to check if there is any driver update under Device manager from manufacture's website.
Kate Li
TechNet Community Support
Yep didn't work. Still get drops all the time, had to run a Cat 5E cable to my laptop from my modem, because I have Atheros Gigabyte Lan adaptor. Works Great. The Wireless still drops all the time. Has Microsoft let out the patch to fix this or is it coming in
April in the 8.1 patch that's coming. Funny thing is all for Widi, I don't even use widi, I got the software to do that from Samsung works better on my TV. Intel and Microsoft need to get this fixed. because their driving off gamers and that's the
people that make sure they buy Microsoft so they can play games. With the wireless link dead and a great laptop worthless what's the point. Ive been in IT for 13 years building PCs and Servers how I knew how to run a 60 FT Cat 5e line thru
a 2 story house and terminate it. Most people don't. Fix the problem.

Similar Messages

A data-binding issue with a combo box.

Hi,
Iu2019m having a data-binding issue with a combo box. The field it is bound to is an integer. The valid values in the combo box are 1, 2, and 3. If I add a record when it is set to 1 or 2, the value gets stored correctly. If I add a record when it is set to 3, it is stored as 1. However, I can bring up the record just added on the form, change it to 3, and click u201CUpdateu201D and it is saved correctly as 3. If I change it so that the valid values are 4, 5, and 6, it saves a 1 regardless of what is selected in the combo box. It looks like the combo box is correctly bound for updates but not for adds. The table is a master type UDO. Any ideas? Iu2019m somewhat committed to the field being an integer. I'm using 2007A PL47.
Thanks,
Mike
Edited by: Mike Angelastro on Jul 1, 2009 2:43 PM

I tried a few things on my own. The result is that I decided that it was not a good idea to use a combo box bound to an integer (numeric) field. I donu2019t think the SDK can handle it. The reason it was an integer field in the first place is that before I changed it to a combo box it was a group of two option buttons. Option buttons use an integer (numeric) field. This worked just fine until I added a third option; the SDK didnu2019t handle the third option correctly when adding records. I thought that using a combo box instead would fix that. I was wrong; the problem remained. So I decided to use a character (alphanumeric) field instead. This works just fine.
So here is my advice: Never use option buttons if they need to be bound to the database; a combo box will actually work better when bound to the database. But use a character (alphanumeric) field.
Edited by: Mike Angelastro on Jul 5, 2009 9:15 PM

IOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings

iOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings via a Configuration Profile. Has anyone else got the same issue? Are Mac users got this issue?

This seems to be working for me now but will keep monitoring it the next couple of times I use it to make sure its not a one time thing

Driver issue with Intel ICH9M LPOC Inte. Controller post windows 7 upgrade

Upgraded from vistahome premium to 7 proffesional and have hardware issue with this device
on Intel(R) ICH9M LPC Interface Controller - 2919
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
Went to intels website and could not find driver for 7 (there were drivers for vista & xp)
Any idea where to get driver for this

Hi,
It really helps us help you when you identify your notebook with its complete product name or product number and include it in a post in you thread..
Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name (p/n). Post one or both of them (with all alphanumeric characters here).
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to troubleshoot Windows 8 Mail app connectivity issues with Google Business Apps?

My company went to Google Apps last year. I am unable to connect Mail App on Windows 8 to my corporate Google account. I am using m.google.com for server with SSL enabled, but no luck. I also enabled bit locker as my company policy requires device encryption.
Mail App does not give a clear error message. It simple states that this PC does not meet security policies enforced by Google. Please advice. I already made peace when my Nokia Lumia 920 running windows phone 8 does not connect to Google
apps because of a bug that would not turn on device encryption unless requested by Active Sync and it would not turn on with Google sync.
These are annoying issues that Microsoft must fix to gain enterprise support. Here are the settings from my mobile settings page:

Answer is of no use. I tried all the forums and websites. I am not able to connect to corporate google apps because it requires SD card encryption. How do I enable this on windows 8.
Please discuss this with your boss and other peers before answering. This is an advanced question. I am going to paint this a little bit more..
Today's enterprise requires that most devices support device encryption and Windows Phone does support device encryption but here is the problem- there is no support for SD card encryption. Even for phones like Lumia 920 that does not have an SD card cannot
connect to Microsoft Exchange ActiveSync due to a bug in the implementation.
When the policy parameter Require Encryption on Storage Card is enabled, Windows 8 and Windows Phone 8 devices misreport the presence of an SD card, even if the device has no SD card slot. The policy enforcement occurs, provisioning fails, and the device
cannot be synchronized. You can read more on their support site:
http://support.microsoft.com/kb/2464593
This long thread on the Microsoft community is a testament to this problem:
http://answers.microsoft.com/e...3ce3-49e4-8069-ecdccd55a5f9
This is also a problem for those enterprises that are using google apps and running Microsoft exchange activesync. Take a look at this request and policy that will throw the 85010013 error on your windows phone.
Request :
https://m.google.com/Microsoft-Server-ActiveSync
Server Data:Provision/Policies/Policy/Data/EASProvisionDoc/RequireStorageCardEncryption=1
Overall, I hope Microsoft fixes this issue soon

Windows 8 and LR tethering issue with D7000

I just purchased a new Lenovo W20 laptop with Windows 8 pro, installed LR and PS6. All of this is up to date on patches.
I tried to tether my Nikon D7000 to a USB 2.0 and USB 3 port and have the same issue...
LR sees the D7000 and lists it in the tethering bar and sees the settings for aparture, ISO, and shutter speed. Problem is it will not import and show the files from the camera when I shoot, nor will it trigger the camera with the LR tethering button.
I have successfully shot with this camera when tetered to another laptop using windows 7 and the same LR current version.
Do I likely have a LR or Nikon driver issue, or is there some basic compatability issue with Winodws 8 that is yet to be worked out?
When I use explorer, i can see the files on the D7000 and the thumbnails show up fine in explorer.
Leroy

Are they using the built in reader in Windows 8 or is it opening in Adobe Reader?
I've noticed the built in reader app doesn't close files unless you close out of the application. So, you wouldn't be able to delete them until you close them.

HT5219 When can we expect a fix for the Windows 8.1 hot-plug issue with a Thunderbolt device.

When can we expect a fix for the Windows 8.1 hotplug issue with a Thunderbolt device. I got a dock to easy my up-and-go time when moving from using my laptop on the desk vs in meetings. Instead my computer crashes and I have to reboot.
I am seeing this issue with the 2012 Macbook pro Retina running Bootcamp with Windows 8.1 x64 bit with the F4U055 Dock from Belkin

I can confirm that hotplug does work properly on Windows 8.1 with Asus Thunderbolt ExII (Thunderbolt 2)
But does not work with Windows 8.1 and MacBook Pro Retina (Thunderbolt 1)
To get hot plug working with the Asus Thunderbolt ExII, you install the intel thunderbolt drivers, and then you get an interface where you can eject devices, and do things like setup more detailed security. However, this doesn't have any effect with the MacBook Pro. I suspect that either:
1) Apple's Thunderbolt hardware doesn't support hotplugging on windows
2) Hotplugging on Windows requires Thunderbolt 2
So, I should check on my Mac Pro (dustbin edition) to see if it works there with Thunderbolt II
Be great to hear if anybody has any success with this on an Apple device!

[UNSOLVED] Graphics Card Issues with Intel 945GSE

I have several issues and im not sure if they are related to the same reason. But I think it all has to do with my graphics card not being detected right.
I have a Samsung N310 with 1,6 Ghz and 2Gb RAM and am using Gnome. If i go to "System settings --> System information" it shows me "Graphics: unknown".
Since my new installation i dont have an xorg.conf anymore, and i did not experience any disadvantages yet, but before my graphics card was detected as following in the xorg.conf:
"Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)"
In the Gnome System information it was not listed though, like now.
This is not really a problem, but it made me think that my other issues could be related to the card being not detected right.
Here are my real problems:
When i am watching a video on my external monitor i have slight lags, which are really annoying to me,
because im a big fan of a good picture!
It is explicitly visible during pan shots or when cars a moving from the one side of the picture to the other.
And the larger the file is, the worse it gets... The lag with dvds or large mkv-files is even worse and not watchable anymore!
My machine should be capable of running a film on fullscreen on an external monitor though, at least it does under XP on the same screen. Flawlessly!! And since arch is a minimal system, it should work! I am experiencing these problems with gnome2 and xfce as well, so it cant be related to gnome3!
Im also experiencing lags with the Gnome shell, for example when i move my mouse to the activities button in the upper-left corner or when i am moving windows with the mouse.
And last but not least firefox is very laggy while scrolling. But since even users with faster machines experience slight problems of that matter with firefox, i dont think that this problem is related to my card.
I could stand the issues with the Gnome shell and firefox, but i at least want to be able to watch a film with my computer!
I hope that my computer isnt simply to slow...
Greets
Last edited by gunjah292 (2011-12-21 20:09:44)

gunjah292 wrote:
HAHA!! The trick was not to enable VSync but to disable it!
I just changed the SwapBuffersWait Option to "false".
I have around 300 FPS now and my video lag problem is GONE!!! Thanks for the tips! I will mark this solved now!
Well, that's a surprise for me. I had to enable VSync to stop video tearing with my Intel HD 3000 GPU (Sandy Bridge).
From the Intel xorg driver man page:
Option "SwapbuffersWait" "boolean"
This option controls the behavior of glXSwapBuffers and glXCopySubBufferMESA calls by GL
applications. If enabled, the calls will avoid tearing by making sure the display scanline is
outside of the area to be copied before the copy occurs. If disabled, no scanline
synchronization is performed, meaning tearing will likely occur. Note that when enabled, this
option can adversely affect the framerate of applications that render frames at less than
refresh rate.
Default: enabled.
Glad you got it sorted!
Last edited by David Batson (2011-12-14 23:21:57)

Issues with intel graphics

Hello everybody.
I recently installed arch on my new laptop (lenovo z460, core i3, intel graphics), and I'm facing issues with graphics: every time I execute some 3D application the X is crashing.
I use kde4 as window manager, but did a test on gnome and faced the same issue there, so it does not look like a WM issue.
The applications I tested so far are the video players using gl as video output and games like openarena. Video players using xv as video output with composite disabled runs well.
Searching on the forum, I saw an old post with an issue similar to mine, saying that this is an issue introduced in ligbl 7.4.2, but I cannot even downgrade to this version since I cannot find it anymore.
One more information that may help, I did a try with arch 32 and 64 and faced issues on both, but I also tried on kubuntu 10.04 LTS and this issue does not happen there. Unfortunately I am not that experient to understand the differences and find a solution
Do you guys have any ideas on how to fix this issue? I really don't wanna use kubuntu...
Thanks

Kubuntu likely has older versions of Xorg and the intel driver. If you look into /var/log/Xorg.0.log on both Arch and Kubuntu, it should be possible to find out which version works and which don't. You can then see if you can find the working version in the repositories.

Bootcamp windows 8.0 pro installation issue with early 2015 Macbook Pro

I am having this issue with installing Windows 8.0 pro (and 8.1 pro) on my early 2015 MacBook pro vs. Bootcamp. I have tried different method for multiple times and all failed. Any help is appreciated.
Hardware: (1) early 2015 MacBook Pro with 128GB (13 inches) , (2) Sony USB DVD burner. (3) Two 16 gb flash drive 2.0 version from two different manufactures
Software: (1) 8.0 Pro ISO on flash drive from Microsoft (I have two copies) (2) 8.1 Pro downloaded from Microsoft website.
Note - I was able to download the bootcamp supporting files successfully and copy to a USB flash drive.
Method 1 - Create the installation disk from ISO on flash drive and also tried copying ISO on hard drive (desktop)- failed.
I have a 16 GB flash drive (2.0V) connected
ISO is a valid 8.0 pro copy from Microsoft came on a flash drive.
I have the windows 8.0 pro ISO on a flash drive and plugged in.
Issue - It gets to around 50% of "Copying Windows files..." and then doesn't go any further. 8 hours later, still stuck at around 50%. I also tried to do the copy ISO from desktop. failed as well.
Method 2 - I repeat the above steps with Windows 8.1 ISO downloaded Microsoft website - failed. Stuck at 50% copying windows file for 9 hours.
Method 3 - I burned the Windows 8.0 pro ISO to a DVD and try to do the installation through a DVD instead. DVD was successfully created.
I was able to perform the partition. When the computer reboots, it starts the window installation. However, it got stuck at 7% forever. I tried this multiple times and failed.
Method 4 - I download a 8.1 Pro ISO from Microsoft website, I burned it to a DVD. Repeat method 3, Again, windows installation stuck at 7%.
Method 5 - I called Apple. - What they told me is pretty much repeat the above steps. Still failed.

The ISO file(s) being downloaded seem to be corrupted. Can you use Microsoft FCIV tool - https://support.microsoft.com/en-us/kb/841290?wa=wsignin1.0 ?
The DVDs should be burnt at the recommended rate for the physical media. DU should be used for burning the DVDs.
Reference Disk Utility 12.x: Burn a disk image to a CD or DVD and Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support.

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Data Integration issue with Adobe form

Hi,
We have been using many xACF forms in our WebDynpro java based application.
For one of the xACF adobe form sometimes I'm not getting the data from adobe form to webdynpro context.
Anyone can pls tell what may be the problem other then binding because that part i have already checked and it's working fine in some of the PC.
Regards
Ravindra Singh

Hi Chintan,
thanks for your reply.
I tried that part already by converting xACF form to ZCI but facing issues with the drop-downs.
Actually some of the dropdowns have values more than 1000. The value help for these drop downs comes as pop up in case of ZCI forms and the mazer problem is that in offline scenario doesn't even shows values for such dropdowns as a pop up or normal drop down.
As per the SAP Note 1013227 we are using the enumerated type of drop downs for such larger values but no help in offline scenario. I tried by changing the parameter value in visual admin as suggested in sap note which prevents pop-up for lager values but it's not recommended by SAP. Only because of this issue we are not able to migrate from xACF to ZCI.
Do you have any idea how to get values for such drop downs in offline scenario.
Thanks & Regards
Ravindra Singh

SERIOUS lag issues with Intel iMac

Hello everyone,
I'm pretty frustrated right now. I've been having this serious lag issue with my new iMac for the past few days. I think it may have started after I ran the last security update.
What happens:
When switching between apps, the system will hang for 1-3 seconds between doing anything. This includes typing, mouse requests, etc. It's VERY frustrating. I have activity monitor open currently, and I am seeing both Safari and SystemUIServer hogging up the CPU resources like CRAZY. I've even seen Safari recently give a CPU usage of 120%, right before I loaded this webpage. tis isn't just centralized to Safari too.... I have the following apps running:
Adium 0.89.1
FoireFox 1.5.0.8
Safari
Activity Monitor
My Memory stats currently are:
175MB Wired
708MB Active
618MB Inactive
1.47GB Used
There should be no reason I'm getting these lags with just two web browsers and a chat client open.
Has anyone else expierenced the lags?? Any suggestions? I'm almost ready to reinstall OS X and not run the last security update. Thanks
iMac 1.83 GHz Core Duo Mac OS X (10.4.8) 1.5GB RAM, Extermal LaCie 160GB FW Porsche Drive, Griffin iMate, iPod Min 4GB, JBL Creature Speakers

Hello Matthew
Are you running any maintenance scripts on a regular basis?
http://www.thexlab.com/faqs/maintscripts.html
I would manually run this script from The X Lab, and my load times would improve greatly. The problem was, I would forget to run them untill I noticed web pages loading slow or iTunes and iPhoto taking for ever. It wasn't untill someone here in discussions suggested Anacron that I saw the light. WOW what a difference Anacron has been making in my overall system speed. My iMac has not been shutdown for 11days 5hrs 34mins (sleep or use only) and opening new App's, switching App's and web pages load as fast or faster than after a fresh start up. If your system is operating properly and you are having only what seems to be a slow or sluggish issue Anacron will make a difference.
http://members.cox.net/18james/anacron-tiger.html
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.8) Maxtor 300GB FireWire 2G Nano

App-V 5 SP2 install issue with Intel NIC Driver 11.16.96.0

When deploying App-V 5 SP2 using SCCM 2007 it will install with no problem on the machine. However, when the user reboots after the install the machine will blue screen. The user then reboots again and machine comes up to the desktop. However,
the App-V service is not running and is still set to automatic.
Looking at the Blue Screen dmp file the common theme looks to be a conflict with an Intel NIC driver version 11.16.96.0. Machines running an older version of the driver do not experience the issue with the blue screen after reboot and the App-V service
starts with no issues.
Has anyone seen this issue before?

Version 19 appears to be the latest: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18713&lang=eng&ProdId=3025
Have you tested with this version instead?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Inherent ground Loop/audio hum issue with Intel Core 2 duo?

Has this ever been resolved? I can't find a definitive solution:
We're a recording studio and have put a 2.16 Intel Core 2 Duo,
667Mhz running OSX 10.4.11 into service for a second workstation.
The audio I/O device is an Apogee Duet Firewire audio interface.
The Mac delivers a continuous 60 hz hum to the audio signal on the
output.
Tried a ground lift which did not resolve it at all.
Audio is clean on the headphone-out of the interface btw.
Based on searches, discovered this is a known/reported issue with
a number of Mac models - tho i've not found specific fix for this
particular model if any exists.
Apparently a Mac defect. Any suggestions?
We are a pro audio facility and things like cables and external devices
have been tested and ruled out. All definitely points to an internal
issue w/ the machine.
There are numerous old threads about CHUD developer tools(?)
But, NO version I've downloaded (i think we installed/deinstalled
'em all) has offered this "Nap" processor-adjustment option that is talked
about as having "fixed" this hum issue for MDD G4 and Intel G5 model users.
Love to hear from anyone who can help on this...Hate to have to dump a nice
Imac for this. (Everything's perfectly quiet about it except the audio out -
that kinda blows ; (

Hi, checking back in on this. OK, running a Macbook in place of the IMac with the same Apogee Duet firewire audio interface, the hum is not apparent on the output.
The iMac has a ground lift. All suggests that this is a known internal intel iMac problem and hope any fellow users could give me some idea of how to correct it before I must relegate this one from studio to office use. (we simply have to have clean hum-free audio monitoring...don't think that's asking too much eh?)
Again, there've been posts going back over the years about some form of developer tool adjustment that enables putting intel machine processors into a "Nap" mode.
Is there a version of the CHUD tools that will offer this option on this model?
(intel 2.16 core duo - 10.4.11)
Thanks for any other ideas
Mike

Windows 8.1 Data reordering issue with Intel Adaptors

Similar Messages

Maybe you are looking for