Windows 8.1 Dell Backup and Recovery exe doesn't work

I purchased dell Inspiron 3542, initially when i click on Dell backup and recovery then it was moving to create backup page. I install some software and transfer some data in my laptop, after this dell backup and recovery is not working. Not able to create backup in usb.
When i click on dell backup and recovery then it ask me for permission when i click on yes, nothing happen.
Any suggestions?

Uninstall it.  Reboot.  Then install.  Reboot.
All of this should be done as Run as Administrator or it will fail.
16GIG or Larger usb flash drive is required.  8 gigs is too small.
http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=8HY96

Similar Messages

  • Windows 8.1 recovery problem and install dell backup and recovery software...

    i had upgrade my windows to 8.1, the problem is that i cant install Dell backup & recovery, when i installing and updating PE I get FACTORY SETUP ERROR 5
    is there any technical help me please...thx
    however...its cant recovery or reset my laptop back to factory image...
    just like this photo...
    recovery cant... refresh also cant...

    Same problem here: windows 8.1, dell backup and recovery 1.6.2.4. During the installation, when the box of "updating PE environment" appears, i get "factory error 5"
    Is there any solution?
    Regards

  • Dell Backup and Recovery - Factory Recovery fails, need advice.

    Back story:
    I have tried this three times on three separate laptops, with poor results. Windows 7 on two of them and 8.1 one one, on all three the recovery partition is corrupt.I first boot it off of a live disk and backup any desired files. Then I boot, press F8, choose "Repair your computer" and discover that "Dell Factory Image Restore" is not one of the available options... so I boot the pc off of a different live disk and remove a bunch of "viruses", then I boot it off of the internal harddrive.In Windows I find that "Dell Backup and Recovery" may or may not be on the pc. It may or may not have ever been run before. If it is absent I download it and install it. When I run DBaR it tells me it needs to update, don't power off or disconnect the machine from the internet, etc. I then wait HOURS for this part to complete. When done it...
    This topic first appeared in the Spiceworks Community

    Country: Greece
    Ship date: March 04, 2013
    XPS 14 (L421X, Mid 2012)
    EMEA (Europe, Middle East and Africa) Support is not provided on the USA User Forum. You have to contact support in your country.
     Dell Backup and Recovery SOFTWARE support is also not provided here.
            Download Dell Backup and Recovery

  • Application Restart and Recovery APIs doesn't work for windows services

    I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception)  before my windows service crash down.
    It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service. 
    I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
    But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
    So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement? 

    I would suggest trying ARR if that's what you want to use.  The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
     You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.  
    DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information.  You do however have to write a good deal of code to do somethings.  It's pretty simple to use the unmanaged
    function that I pointed out before and
    MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed).  You can even write a basic debugger that literally debugs a process using
    only kernel32 functions (see
    https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).  
    WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

  • Recovery partition and Recovery disk doesn't work

    I have HP Pavilion dv6000 Windows Vista Home Premium with Recovery Partition at drive D:\. Here is my problem. I want to use the System Recovery to put my PC to its default setting, I have use Recovery Manager, but System Recovery does not work. I have also use a recovery disk, but nothing works. Using the Recovery disk, while the recovery is in process formatting the windows partition, and the process reaches 33%, a windows error pop-out (Error: ox4001100200001005). I need help because my laptop is unstable and I cannot work.
    Yours truely,
    colorlime

    Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • MacBook pro when windows 7 has startup problem and Mac os doesn't work

    I installed windows 7 on my MacBook pro and it did work well. But now windows has a startup problem and "startup repair" couldn't solve it, so I can't use both Mac os and windows and my laptop has become completely useless. Any suggestion?

    Reboot and hold down command-R at the sound of the chime, that should take you to the Lion recovery partition, if it does go to disk utility and see if you have an OSX partition at all.

  • I reloaded Windows 7 on my laptop, and now PhotoStream doesn't work.

    I've had my iPhone 4s for two months. I have iCloud set up on my laptop (running Windows 7 Home Premium), and all was working well. Things I put into my upload folder went up on my phone, and pictures I took with the phone came down to my PhotoStream folder.
    I had a problem with my laptop no longer recognizing my DVD drive, and ended up reloading Windows 7 and starting over from a fresh installation. I re-installed iCloud just as before, but PhotoStream no longer functions.
    Any idea how I can fix this?

    For me, downloading and installing drivers from Realtek worked:
    http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Le vel=4&Conn=3&DownTypeID=3&GetDown=false
    choose:
    Vista, Windows7, Windows8 Driver (32/64bits) Driver only (Executable file)
    Worked like a charm.

  • I installed windows 7 on my imac and the sound doesn't work. How do i get the sound working?

    The sound of windows 7 on my imac doesn't work. How do i fix it?

    For me, downloading and installing drivers from Realtek worked:
    http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Le vel=4&Conn=3&DownTypeID=3&GetDown=false
    choose:
    Vista, Windows7, Windows8 Driver (32/64bits) Driver only (Executable file)
    Worked like a charm.

  • Dell Inprision 2330 Backup and Recovery error message 0x4001100200001005

    A week ago, there were problems with the computer Dell Inprision 2330, and I'm using a Dell Backup and Recovery to restore the disk C to the image stored on the dvd disks. 3 days ago the computer began to hang when windows starts. I decided again to restore the system with dvd, but this time got the error message 0x4001100200001005.
    Tried to restore the image to another drive, but the error appears again.
    Other recovery media then dvd-disks "dell backup and recovery" I don't have.
    Please help.

    I was very disappointed with this buggy system recovery. After I got tired of trying to restore the system, I found a post "Download Windows 8.1 Retail and OEM.iso". Did everything according to instructions. Now the computer is running. Activation performed automatically.
    Recovery Media disks thrown in the trash.

  • Hp backup and Recovery manager application to download for windows 7 home premium 64-bit file

    where to download file to install HP Backup and Recovery Manager for Windows 7 Home Premium 64-bit?
    How to overcome 9996 error while installing cyberlink power director for Windows 7 Home Premium 64-bit?

    Should the updates be installed in any particular order ? I have seen a post on the forums that it needs to be installed in a particular order

  • HP Backup and Recovery Manager for Windows 7

    I installed all the softwares and drivers that came along with the HP upgrade DVD. But, I find that the Backup and Recovery Manager missing on the DVD. Is there a Backup and Recovery Manager for Win 7? I liked the backup and recovery manager that was available on my Vista when I bought this laptop but is now unavailable because of the upgrade!! Any solutions for this? I do not want to use the default Windows Backup as I do not have a separate HDD at the moment to store the backup there and do not wish to populate my local hard disk with backup data!! Thanks.
    This question was solved.
    View Solution.

    Yea, basically. There's no working program for your laptop so it seems that you can use from within Windows 7.
    However, if you have problems, recovery discs will work. As well, if your recovery partition still exists, you can still access it by pressing F11 when you see the HP logo at startup.

  • I want to find any backup and recovery solution for SharePoint server 2013 enterprise

    Dear Expertise,
    Recent set up SharePoint server 2013 Enterprise, and looking for backup and recovery solution, does the built in Windows Backup can handle it, and how?
    KF

    Hi,
    According to your post, my understanding is that you wanted to know some backup and restore solution for SharePoint 2013.
    There are two Technet articles about the backup and restore, you can have a look at them.
    http://technet.microsoft.com/en-us/library/ee428315(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ee662536(v=office.15).aspx
    You can also use some third-part software tools to achieve the same scenario.
    http://www.avepoint.com/products/sharepoint-infrastructure-management/data-protection/
    http://www.sharepointreviews.com/sharepoint-reviews-articles/sharepoint-administration/254-sharepoint-backup-recovery-evaluation
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Dv6775us HP Backup and Recovery Manager software corrupted - can't find download

    I am getting an HP error message saying the HP Backup and Recovery Manager software has been corrupted and needs to be updated. For over an hour I have been frustrated trying to find where on this site to download a replacement of what was installed or an upgrade that would repair the problem.
    Can anyone point me to where I can get the software? Thanks.
    HP Pavilion dv6775us
    Vista Home Advanced

    Did you make a recovery disk set or usb recovery media?
    If you did, then you are in luck because  that is the software that can be used to reinstall the Recovery manager.
    The downside is that you will have to do a  factory image recovery to reinstall the software.  A recovery is a destructive process, unlike a Windows stystem restore. A recovery will mean that you  will needto save all of your data externally  to avoid losing it and reinstall all of your programs after the recovery is complete.
    Regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Backup and Recovery Tool

    The Backup and Recovery doc for OCS 9 Rel 2 states that you can obtain the Oracle Collaboration Suite Backup and Recovery Tool from
    http://download.oracle.com/otn/solaris/cs/10g/9iAS_BR.tar
    This links gives a page not found error and a search does not help me.
    Anybody knows where I can find this file?

    I registered a SR on metalink, and the support person could not find it either....
    Here is what they said:
    Unfortunately despite my best efforts I have not been able to retrieve this 9.0.4 tool for you.
    It has been discontinued.
    I am closing this TA as unresolved.
    Please note that in the Collaboration Suite 10G there is a new tool called: ocs_bkp_restore.sh
    And it comes with the installation of collaboration suite (you don't need to download it).
    You can get more information on it from OTN
    Oracle Collaboration Suite Administrator's Guide 10g Release 1 (10.1.2) for Windows or UNIX
    Chap 11 Backing Up and Recovering Oracle Collaboration Suite
    http://download.oracle.com/docs/cd/B25553_01/collab.1012/b25490/ch_backing_up.htm#i1011638

  • Backup and recovery questions

    Hi,
    I am a newbie in Oracle database 11g Release 11.2.0.1.0 and Oracle Linux and I have questions regarding backup and recovery.
    I used the “Schedule Oracle-Suggested Backup” and have it run nightly to back up to local disk. In the Backup Setting, on the Retention Policy, I selected “Retain backup that are necessary for a recovery to any time within the specified number of days (point-in-time recovery) day = 7”
    With the setting above, I checked the “Manage Current Backups” and I have many back sets for SPfiles, controlfiles, datafiles, and archivelogs for the last several days. However, for image copies, I have only one set and it get over write nightly. With the configuration above, is that true that I can only recover to any point in last 24 hours?
    My goal is to be able to recover any “point-in-time” in the past 5 days, should I change my Retention Policy to “Retain at least the specified number of full backups for each datafile” to 5 backups (each full daily backup)?  Please provide some advices. Thanks

    By looking the following, it looks like by default its 24 hours but it depends upon the recovery window you choose.
    Enterprise Manager makes it easy to set up an Oracle-suggested backup strategy for backups to disk that protects your data and provides efficient recoverability to any point in the a recovery window of your choosing. (In the simplest case, examined in this section, this window is 24 hours.) The Oracle-suggested strategy leverages Oracle's incremental backup and incrementally-updated backup features to provide faster backups than whole database backups, and faster recoverability than is possible through applying database changes from the archived log to your datafiles.
    The Oracle-suggested backup strategy is based on creating an image copy of your database. This copy is rolled forward by means of incrementally updated backups. Oracle Enterprise Manager schedules RMAN backups jobs for you to run during the overnight hours.
    For each datafile, the strategy calls for backups as follows:
    At the beginning of day 1 of the strategy (the time the first scheduled job actually runs), an incremental level 0 datafile copy backup. It contains the datafile's contents at the beginning of day 1. In a restore-and-recovery scenario, the redo logs from day 1 can be used to recover to any point during day 1.
    At the beginning of day 2, an incremental level 1 backup is created, containing the blocks changed during day 1. In a restore-and-recovery scenario, this incremental level 1 can be applied to quickly roll forward the level 0 backup to the beginning of day 2, and redo logs can be used to recover to any point during day 2.
    At the beginning of each day n for days 3 and onwards, the level 1 backup from the beginning of day n-1 is applied to the level 0 backup. This brings the datafile copy to its state at the beginning of day n-1. Then, a new level 1 is created, containing the blocks changed during day n-1. In a restore-and-recovery scenario, this incremental level 1 can be applied to the datafile rolled forward on day n-1 to the beginning of day n, and redo logs can be used to recover the database to any point during day n.
    The datafile copies used in the Oracle-suggested backup strategy are tagged with the tag ORA$OEM_LEVEL_0. The level 1 incremental backups for use in this strategy are created for use with datafile copies that are so labelled. You can safely implement other backup strategies without concern for interference from the backups for the Oracle suggested strategy.
    There are also Oracle-suggested strategies that use tape backups along with disk backups, but those are beyond the scope of this chapter.

Maybe you are looking for

  • UTL_SMTP package not working in trigger

    Hello Friends, I have created a trigger through which i am trying to send a mail.but it gives an error message as: ORA-30678: too many open connections Also when i run the same script at the SQL Prompt, it will send the email to mentioned recipients.

  • Profit center consolidate report - internal transactions

    Dear friends.. how the transactions occur between TWO profit centers (Inter company code transactions) can appear in consolidated statement. Actually these internal transactions can be eliminated from the statement because there is no effect in comap

  • Why do we run Hthuviek report in sap hr

    Hi Guru's, My client has asked me this question that Why do we run HTHUVIEK report in sap hr,i said them  it updates the value in field PA0003-VIEKN if it is blank,(Usually we run this report for Rehiring Error) so each time my client gets this error

  • How to understand which BC set for Object BUS 2121 has to be used.

    hi, How do we understand this, If i have a BO BUS 2121 - then how do i know which BC set has to be used. and wht would be the suitable  BC Set for my reuirement . On what basis would i come to know that what would be the prefered BC set for this. Kin

  • Query Results

    Hello, If I have a query with 1 characteristic in the rows and 1 key figure in the columns. I get a results row that totals everything. Is it possible to get a results row for each change in the value of the characteristic? For instance, lets say the