Windows 8.1 Error Code (BAD_POOL_CALLER) "0x490"

So I recently had a issue with my Windows 8 that prevented me from using my computer. I was happily editing an image on my Windows 8.1 PC when the whole computer crashed. So as anybody would I reset the computer to find a BSOD awaiting me on Bootup. The
error code being "BAD_POOL_CALLER" which is from what I can understand a driver related issue. I could no access safe mode and windows repair was not picking up the issue.
So I then proceeded to format the hard drive using a Ubuntu (unmounted) disk with the application "Gparted" to format the hard drive to a Fat32 file system in a hope that whatever driver was causing the issue would be promptly deleted from the
hard drive. Once I had formatted the HD to Fat32, I re-formatted it to NTFS to re-install a fresh version of Windows 7 on the HD.
So I installed this on to the HD with no issues at all, until it came to re-booting for the first time when I got the blue screen of death again but this time the cause was "0x049". So I let Windows try to repair the issue which unsurprisingly
it could not figure out what was wrong. I have tried safe mode which does not work, I have tried all the "BootRec.exe" commands in the command prompt in system recovery options window. And nothing seems to help, does anybody know if this could be
a problem with the hard drive as I tried it in another computer and it boots fine, so I am leading myself to believe it may be a problem with a BIOS driver?

You may have a BIOS problem, but there are no drivers for the BIOS. The BIOS is the system firmware. You will have to go to the support website of the computer/motherboard manufacturer to look for a BIOS update as Windows has nothing to do with
the BIOS - that is the sole responsibility of the computer/motherboard manufacturer.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Cannot download camera raw version 6.6 Windows 7 get error code U44M2P7

Cannot download camera raw version 6.6 Windows 7. get error code U44M2P7

70D support requires ACR 8.2 or newer, which requires an upgrade to PSE.
I’d suggest doing a trial of PSE13 to make sure it works on your computer:
http://www.adobe.com/downloads.html

My Airport Express will not stream music to my remote speakers through the laptop (windows Vista), gives error code -15000. Works fine from my IPAD and Ipod. Any thoughts, suggestions?

Itunes is throwing a -15000 error code on my Windows vista. Ipad and Ipod work great for streaming to remote speakers, trying to use the computer and it throws the error code.
Any thoughts? I've rebooted the laptop, modem, and AE, even plugged in the laptop recommended by other users, still nothing.

the following is for W7 but might work for you:
Fix for error -15000 Remote speakers on iTunes / Windows 7

Windows xp sp3 error code 10

Anybody have any solution for this error code??
I already downloaded the latest driver from cisco and installed. on device manager it shows the AM10 under network adapter, but theres an error code 10 saying that the device cannot be start.
And
Is there any way to restore the dirver that came wtih the AM10 inside, cuz i formatted the device memory, so everything in gone now.
Thanks

See if your audio card maker has an auto device update checker now available. Try that.
In General, could try ROLL BACK or UPDATE drivers in Device Manager.
Not possible for my audio card.
If not fixed, then: the key is to UNINSTALL the current driver from C:/Windows, with Add/Remove or Device Manager hopefully completely uninstalling. My card maker says to use the first for XP and the second for Vista. Note: a system restore point will be made automatically.
If after restart, the 'Found New Hardware' window doesn't display, the driver files are still not properly UNINSTALLED.
Look for a System Restore point from before initial changes. Try that.
Another method - Use the official installer cd which unlike the downloads provides the option to UNINSTALL via setup.
Read this: http://pcsupport.about.com/od/findbyerrormessage/a/code-10-error.htm
My unofficial method for any driver uninstall:
1. Uninstall via Device Manager or Add/Remove
2. Run CCleaner.by Piriform.
3. Run Windows Registry Repair Pro by 3B Software.
4. Check via Windows Install Cleanup tool
5. Optional - Look in the driver folder (usually on C: ) at last folder can open for typical file names.
6. Optional - Manually search c:/windows for the files and delete. (first do a system restore).

Windows 7 Update Error Code 80070005

I've been trying to update windows 7 for a while now. I've looked up every way possible, and every time i shutdown and tries to configure, it fails. then i check and see the error code 80070005. i know that this means that i dont have permission. im on
the administrative account, ive tried my best uninstalling any third party programs and still nothing.

Hi,
The error code 0x80070005 is also described as "ACCESS DENIED." You may receive this error if you don't have the appropriate permissions to install a particular update. This can also happen if malware is on your computer.
For more information, please refer to this article:
Error 0x80070005 in Windows Update when you try to install updates
http://support.microsoft.com/kb/968003
Karen Hu
TechNet Community Support

Windows security update error code 80092004

I am repeatedly trying to update my windows security setting via windows vista update. One important update was not completed with consistent accuracy. its called error code 80092004. The hard disk has plenty of space, the update was 8.5mb, it always hung on 11% without going further during download and the the error code is flashed with red buttons to say one one imporatn update has failed. I did this umpteen times over a few days now withou success. Can anyone help?

I am repeatedly trying to update my windows security setting via windows 7 home basic 64 bit update.
One important update was not completed with consistent accuracy. its called error code 80092004 as cumalative security update for internet explorer 11 for window 7 for x 64-based systems (KB3038314) during window update after just reinstallation /recovery
of operating system & vaio updates.The hard disk has plenty of space, the update was 42.7mb, it always hung on 11% without going further during download and the the error code is flashed with red buttons to say one one important update has failed. I did
this above afford more times by one by one over 2 days without success. Can anyone help? plz solve my issue with proper link

Windows 8 KB2845533 error code fix 3 Methods

There is Three ways to fix Windows Update KB File that I am having trouble installing I have used the DISM and its hanging. Is there a simpler way to do with e.g. Microsoft Hotfix? A File that fixes the problem.
More Info: I am trying to get the Windows 8.1 Upgrade to pop up on the Store.

Hi,
We need further information to troubleshoot this kind of issue.
What is the error code when you failed to install this update?
You can check the WindowsUpdate.log to see what’s wrong with your installation.
Alex Zhao
TechNet Community Support

Windows 8.1 error code 0xC1900101-0x30017, stuck on splash screen.

I have a Gateway ZX 4270 series, every time I try to update to windows 8.1, it's stuck on the splash screen. For hours there would just a black screen that says Gateway. Then I would have to restart it, and it would switch back to the regular windows 8.
When I logged on, the error code 0xC1900101-0x30017 comes up. How could I solve this issue?

Most of issue like this regarding BIOS update
You should follow this document from Gateway to upgrade Windows 8.1
http://gateway-us.custhelp.com/app/answers/detail/a_id/32011
I suggest you revert back to Windows 8, and ask for technical detail to Gateway regarding this before you update your PC

When Trying to Install Labview 8.6.1 on Windows 7 Get Error Code -12

When Trying to Install Labview Deveopment Suite 8.6.1 on Windows 7 Get " *** Error: Windows SDK Function Returned an Error (Error Code -12)"
I assume a compatability issue will Labview installer and Windows 7. Is there a work arround?

I figured as much, but maybe if enough peole are interested NI will be pushed to a solution.
It's not that the programm won't run, it's that the installer fails before it even gets installed.
I am using Windows 7 RC Build 7100. It installs and runs just fine in Virtual XP Mode on Virtual PC for windows 7 (http://www.microsoft.com/windows/virtual-pc/download.aspx) which I find works better than compatability mode.
Thanks for your help.

Backup failed for Windows 2008 R2 error code 2147755009 event id 19

Hi Guys,
I'm doing Windows server backup to a NAS drive via iSCSI target, and everything works fine until a few weeks back where my backup started to fail with the above event ID and error code. Description provided by Microsoft doesn't help either as it simply doesn't
explain much at all. (http://technet.microsoft.com/en-us/library/cc734218%28v=ws.10%29.aspx)
I updated the firmware of the NAS drive, make sure iSCSI connection wasn't dropping, and i even manage to do a backup manually via the "Backup Once" action. But when it comes to scheduled backup, it keeps on failing. I'm pretty sure the NAS drive
is working fine as well as iSCSI connection since i can do a backup manually.
Any idea guys?

Hi,
Could you please provide more detailed information about the error? You could refer to the article below to check if it helps:
Event ID 19: The backup operation attempted at '‎specific date' has failed to start, error code '2155348032'
https://bluesolutions.zendesk.com/entries/23345746-Event-ID-19-The-backup-operation-attempted-at-specific-date-has-failed-to-start-error-code-215534803
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to install Windows 8 updates error code 0x800736B3 and 0x80246007.

Hi
I am having issues with the Asus Transformer tablet/laptop TX300CA.
It comes with Windows 8 Pro.
After downloading windows 8 updates, it doesn't want to install all of the software updates.
I received an error code such as 0x800736B3.
Can anyone help???
Is there methods to solve this issues???

Andre,
Can't do that now. The owner is giving up with Microsoft and stick with his trusty MAC OS X!
His Asus Transformer TX300CA indeed have Windows 8.1 driver support. I did check with ASUS website.
However I did many tests base on Microsoft Support Knowledge base.
I even try the Microsoft Fix it. It too didn't work.
The Asus Transformer TX300CA is using Windows 8 Pro OEM version.
There is a possibility that his Windows 8 is corrupted.
I try to find the "C:\Windows\winsxs\poqexec.log". No where to be found.
The strange part is The ASUS Transformer TX300CA cannot install any updates patches of Windows 8!!!
I come to know that many people are having this issues regardless which laptop brand they are using.
However I did it with ease on a Lenovo laptop.
The process of having upgrading to Windows 8.1 via Windows Apps Store is very tedious and long process. It's very very slow. Not unless you have a High Broadband speed.
It's very time consuming. It's not a good method of upgrading to Windows 8.1.
My Suggestion to Microsoft to release a FREE DVD upgrade disc to all of it's customers.
You have to bare in mind that not everyone in the world is using a High Speed Broadband network.
In some country they still using a clunky old 24,33.6,56K modem.
How are they going to do the 3.8GB of upgrade to Windows 8.1. It will take them months to complete the tasks.

Transferring multiple videos by windows explorer. Error code 0x80030001

Phoostream is a great feature. Transferring photos have never been so easy. However, I do have a qualm regarding the service and that is that it does not sync videos! Therefore, I still have to go back to the arduous processes of plugging it into my computer and selecting the videos to be transferred to my computer. However, it wasn't as easy as I had expected. Windows import feature imports both photo and videos and I can ONLY import new media. Old media is not imported so that means that videos that I synced that may have been deleted are not imported through windows explorer.l, and I cannot get it to transfer anymore. I tried copy and pasting multiple videos from the windows explorer but it prompted me the error code 0x80030001 and it cannot be transferred. I have to transfer them individually. Anyone has a reliable and easy way to get my videos to transfer from iPhone to PC?

yeah! sure windows problem... neither the location nor the folder path is given in default industry standards... by APPLE DEVICE
But if I need my latest taken picture from an apple phone... one can see over more than 30 directories random named like 845OJOX or 900DZDMI ???
In those random named directories lies apples 'closed coding' following faulthy tagging and resulting in different and random again batches of photos taken.
If I do a search in windows I can find all the pictures on this apple phone and even better i'm in control to sort the way i like!
Unfortunately the apple 'faulthy tagging method' makes it impossible to communicate with any other divice about accessing...
This is a simple poor show of apple's limited object oriented filing...
The same i had from pictures taken of a holliday where i did change my phone to local time and my wife's phone not and the seperate camera had also home settings... when i imported those all together after holliday via a program called i-tunes I had to buy 3 different apps and store all these holliday pictures(8gig) seperate (problem since 16gig should be available on apples device; i had only 9gig freed by eliminating all apps possible... and needed 24gig total for apps photo database) in all the overpriced purchased apps, to finaly show those pictures time synchronized to the holliday !
How hard it can be to sort files as the user needs????
DRAMATIC POOR APPLE PERFORMANCE (i thought apple was so good with pictures and so..)
On my pc I also did import the holliday pictures from these three devices and sorted those within minutes(!!!) right to holliday time sync...
Anyway i found also a time consuming way to copy latest taken pictures in random apple maps
(i wish to select a specific time batch and drag these to new map on pc (no apple pc))
look in all the random named apple device maps and check if there is a picture belonging to the batch you need and drag these to the new map...
Something what could take from any other phone some milisecs... takes with apple devices 2 days time !!!!
Best way for taking photo's you need later on other devices than apple... take the photo's on a non apple device and save extra holliday time!

Iphone and Windows Live Gallery error code when trying to edit

Most of my photo's come from my iPhone 4gs. Fairly resently i haven't been able to edit photos in Windows Live Gallery. Especially Rotating pictures. I get an error code "file location" - Error code: (0x80070057)

oSCommerce is PHP *dynamically driven* with content supplied from a database.
Content is parsed by the server.
BUILDING DYNAMIC SITES in DW
==============================
Get one of the following testing servers for your OS and follow the installation instructions.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Setting up a PHP environment in Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
Building your first dynamic website – Part 1: Setting up your site and database connection
http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Windows 7 backup error code 0x81000019 (Backup Failure)

Running "backup" failed with error code 0x81000019.
After days of trouble shooting, I narrowed the problem to "com+ event system" service. It showed "started", I restarted it and backup worked. If I restart computer, I have to restart the service again for backup to work.
A "TEMPORARY" solution is a desktop batch file that contains the following lines:    net stop /Y "COM+ Event system"
net start "COM+ Event System" exit
(Run this batch file before doing a backup.)
I have Windows 7 Ultimate (x64). I did a clean install which includes the system partition. No other problems, just this one.

Hi BobK1110,
Thanks for the post!
What’s your error message when you got the error code 0x8100019? Please check this thread:
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/fce6950d-c06d-4dd0-a850-67022db4fe04
Do you have the same error message?
If so, this is a known issue, as a workaround, you can increase the system reserved partition size to 500MB.
Meanwhile, thanks for sharing your solution on this issue, it could be beneficial for other community members.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Windows 8.1 Error Code (BAD_POOL_CALLER) "0x490"

Similar Messages

Maybe you are looking for