Windows 8.1 forgets dpi / display size settings for one monitor on almost every reboot

I use TV 32" with 1920x1080 and cintiq 13" with 1920x1080
when I boot my PC the resolution is fine but DPI is wrong.
In smaller monitor It's look like DPI is higher than the bigger one.
I already set dpi to be the same (smallest 100%) but it's not work until I do something to change display setting.
It's really annoy me. This problem is not happen when I use windows 8
Only solution I found is turn off
"Turn on fast start-up".
When I do that It's boot like what I want. every monitor is the same DPI.
But it'll make my boot time longer.
It should be just start up windows and use the same dpi from the start.
So I think this problem is a bug in windows 8.1
Best regards

Thank you for reply.
I've already used the latest graphic card driver. But It's won't help this issue.
In registry editor. I check those variables then value of them is already set like that blog suggest.
So , it look like when windows start-up(with fast start-up) It use something like
suggest value for different monitor size instead of what I set in control panel. But when I turn off fast start-up windows use my setting value.
And I think there are a lot of people who got the same problem as me.
Here is an example.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-desktop/windows-81-forgets-dpi-display-size-settings-for/385cb615-d699-47f8-8c12-717e3364c866

Similar Messages

  • Multiple Settings for One Monitor

    I have my monitor set to the way I like it, it shows colors accurately and not overly bright (white doesn't blind me). However I edit photos for the web in PS and this is great for my screen but I have noticed when looking at other screens my photos will at times looked washed out and not a good presentation. If I manually change my monitor settings to be brighter (and a few other tweaks) I can replicate the look of other monitors close enough to help prevent washed out/blown out photos. Here is the issue, I need to be able to change settings between the two fairly easily. To manually set my monitor for one then back to the other can be time consuming and a pain to set right every time.
    I would like to be able to preset certain settings (in software) that I can quickly switch between by pressing hotkeys or clicking shortcut on my desktop. I have an AMD video card and have attempted to use the AMD VISION Engine Control Center to add presets then tweak the settings for each. However when I switch between the presets the settings are the same.
    How do I build presets using the VISION Engine Control Center that actually works (maybe I misunderstand what it is saving?) or is there a way to do this in Windows 7 or free software that actually works decently for this purpose?
    Note: I post this here as I assume someone here has done this or seen soemthing like this.
    Thanks!

    Hi,
    Why not to use a event based monitor to detect the Task Schedule running status? I am not familar with VB script, the suggestion I can give is you need to check if the script cannot properly detect the running result of the task Schedule.
    Juke Chou
    TechNet Community Support

  • Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

    Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

    Why have 5 accounts if you need to access all of them.. just have one account?
    Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

  • When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

    When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
    * This site may be experiencing a problem
    * The site may not be a member of the Windows Live Network
    You can:
    * You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
    However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • Apply Settings for EWA Monitoring missing

    Hi all,
      we are adding a SAP HANA Technical System on Solution Manager, but we found problems on EWA:
    We followed the note http://service.sap.com/sap/support/notes/1542651  for using Early Watch Alerts on HANA Standalone (without Netweaver ABAP) and then followed the note http://service.sap.com/sap/support/notes/1747682 for add an HANA Technical System on Solution Manager.
    The fact is that in step 6 of "Managed System Setup" we don't found "Apply Settings for EWA Monitoring":
    In attached image you can see only 4 activities instead of five: the follow image is taken from another Solution Manager (SPS10, but SPS7 works the  same)
    We have SAP HANA 1.0.69 and Solution Manager SPS8.
    Why "Apply Settings for EWA Monitoring" is missing? How can i apply this settings?
    Best regards,
    Roberto

    After 19 hours of this problem, it is now resolved on the management portal.  There was no mention of it being a problem on the Azure Status page.  

  • I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip.  Yes, I know I can add them up myself, but why?  :-)

    I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips.  Yes, I know I can add them up myself, but why?  :-)
    I am using imovie 10.0.6

    For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
    Geoff

  • "Could not retrieve the settings for endpoint monitoring."

    So my VMs are hosed because suddenly Azure cannot retrieve the settings for endpoint monitoring.  If I try to start the VMs, it fails for this reason.  If I try to configure the VMs, it fails for this reason.  When I look at ENDPOINT MONITORING
    under CONFIGURE it constantly says "Loading..."  This all began when today I tried to switch a VM from STANDARD to BASIC configuration.  Now I can't start any VM.

    Once I powered off the VM there was no starting it again, even after switching back to STANDARD config.  Same "Could not retrieve the settings for endpoint monitoring" error every time.  I gave up, duplicated the disk, and created a
    new VM from scratch, which has no issue with endpoint monitoring.  Ridiculous that I had to do that.  Azure continues to be as brittle and unreliable as a drunk monkey.

  • Size settings for swing components and resizing of a JFrame

    Hi all!
    I'd have the following question:
    There is a JFrame, which content panel has the GridBagLayout. In some places on that layout's grid there are JScrollPanels (let's name each as "inner panel") with JTables in the view ports.
    When user resizes the main JFrame, I'd like that all inner panels and corresponding tables would resize synchronously: if user enlarges the main JFrame, then the sizes of all those components should increase proportionally, when user makes the main JFrame smaller, then all the sizes should become proportionally less.
    I am confused with the settings for max, min and preffered sizes for inner panels as well as for their JTables. I have read about those size attributes and tried to play with them, but I can't obtain the needed result :-/
    Each inner panel has the "BOTH" value for the fill attribute in the GridBagLayout's constraints.
    Might someone help me?
    Thanks in advance!

    Hmm...
    The JPanel that contains all stuff is the JFrame's content pane...
    The entire JFrame's content pane contains another panels (JScrollPanels), which are all set to fill all available space on the parent panel (JFrame's content pane) with "both" value of the "fill" attribute.
    Should I put the only one JPanel on the JFrame's content pane and all other stuff at that additional JPanel...?

  • Synaptics Touchpad Tap Scroll settings changed back to defaults on every reboot. Windows 10

    After the Windows 10 upgrade my Synaptics Touchpad setings seem to be reset to factory defaults on every reboot.  I go in and change to deselect Tap and Scroll gesture options, save, and everything works as expected.  If I reboot my pc... all of my changes are erased. I go to Start >Settings > Mouse and Touchpad > Additional Mouse Options > Device Settings > Settings Right after boot:  MultiFinger Gestures (selected)  Scrolling (deselected)  Tapping (selected)  Buttons (selected) After change manually and saved:
      MultiFinger Gestures (deselected)  Scrolling (deselected)  Tapping (deselected)  Buttons (selected) Rebooted again... and back to initial defaults (Arg!!!)  Can anyone suggest a fix?

    Hello! I just wanted to share a solution to this issue. I've been having this issue ever since I started the Windows 10 insider program so it's sad that Microsoft didn't fix it before release. Anyway let's get started! The first thing you will want to do is uninstall the Synaptics Driver. Right click on the start button and click programs and features. Find the Synaptics Pointing Device Driver and uninstall it. You will eventually need to restart your PC but do not do that yet otherwise it will just reinstall itself. Next your going to want to Hide the update from Windows Update. To do this on Windows 10 you need to download a tool which can be found here. https://support.microsoft.com/en-us/kb/3073930 Run the tool it will begin detecting problems and searching for updates. You will get two options, Hide Updates or Show hidden updates. Click on Hide updates and on the list you will see the Synaptics Driver, place a checkmark on it and then click next. Let the wizard finish and you've successfully hidden the Synaptics pointing device driver. Next open settings and click on Update & security, click recovery on your left, and then click restart now under advanced startup. Next click on troubleshoot. Then at the choose an option screen, click advanced options, click on startup settings, and click restart. Once your computer restarts you'll see startup settings. Press the number 7 to disable driver signature enforcement. Your computer will now boot up. Login and open your web browser and go to this link http://www.synaptics.com/en/drivers.php Download the latest synaptic's driver for Windows 8 and install it. Once installed, you maybe prompted to reboot so go ahead and reboot the computer. After that, go into your mouse settings and configure your touchpad to your liking. You will not have to worry about losing your settings after restarting the pc anymore. I suggest keeping the tool that allows you to hide or show hidden updates as it is quite handy. 
    Summary:  
    1.) Uninstall the Synaptics Driver 
    2.) Hide the Driver Update for Synaptics using this tool: https://support.microsoft.com/en-us/kb/3073930  
    3.) Go to Settings, Update & security, recovery, advanced start [restart now] 
    4.) Click troubleshoot, advanced options, startup settings [restart now] 
    5.) Press the number 7 to disable driver signature enforcement 
    6.) Download the latest synaptic's driver for Windows 8 from the website. http://www.synaptics.com/en/drivers.php 
    7.) Reboot the computer if necessary. 
    8.) Configure your mouse settings to your liking. 

  • Boot Camp refuses to display on more than one monitor at a time

    Hello all,
    I just recently purchased a late 2014 Mac Mini and have since installed Windows 8.1 on it via Boot Camp. While using two monitors (one attached via mini-display-port-to-DVI and the other attached via HDMI-to-DVI) they both function as expected when I am running Yosemite. However, when I boot into Windows, at first it will display the Windows logo on the MDP-to-DVI monitor (I'll refer to this as my primary monitor, and the HDMI-to-DVI as my secondary), but once it finishes booting the primary monitor goes to sleep, and the login screen is displayed on the secondary monitor. No matter what I do I cannot get it to recognize both monitors at the same time. I've verified that my graphics driver is up to date (Intel Iris 5100) and have even tried using previous versions of the driver but with the same result. The interesting part is that once I am logged in to Windows, if I unplug both monitors and then plug in only the primary monitor, it will display fine. As soon as I attempt to add the secondary monitor however, the primary shuts off and the OS is displayed only on the secondary. I have also attempted to get Windows to detect the other monitor using the display preferences but it refuses to find anything.
    I've spent quite a few hours already researching this and tried several "solutions." Hoping someone out there is experiencing something similar, or perhaps has some insight on what I could investigate next.
    Thanks!

    bradhaan:
    I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
    This lets me edit several sites and only republish the one I want.
    OT

  • How do I get Firefox to open on both of my monitors in separate windows with different start pages (my stock portfolio on one monitor, google on another) on Mac?

    I want to be able to set the homepage for Firefox so that it will open in two windows (one on both of my monitors) with two separate pages (one monitor opens with Page A, the other monitor opens with Page B)

    Exactly what Bob Levine said. Can confirm, running a two monitor display here.

  • What target settings for LCD monitor calibration?

    I have recently installed Spectraview II to calibrate my NEC LCD 2180WG monitor but have some doubts on which target settings to use as there are different opinions on color temp, gamma and intensity choices.
    I use my system purely for photo post-processing and printing on color calibrated printers. I use AdobeRGB color space and have no interest for processing images for web.
    - What color temp do you use/recommend? D50, D65 or something in between? I see that some folks use D65 and others swear by D50.
    - What about Gamma choice 1.8, 2.2 or L* ? Same here, no common choice here too.
    - Lastly what about intensity (brightness in terms of cd/mm2)?
    NEC recommends Target Settings for Printing, which are D50, 1.8 gamma and Max. Intensity, but I'm not sure.
    I'd appreciate if you could recommend correct settings for my type of work.
    Thank You

    Charles,
    I arrived at 5100K by measuring a few of my favorite printing papers with my spectrophotometer. This was a good compromise (most measured between about 4800K and 5300K). I confirmed the results by trying various calibrations them comparing the monitor to prints (using custom printer profiles). Anywhere near 5000K looked great, but 5100K was the best match of the bunch. I used 5000K lighting for viewing (Solux and Philips light sources).
    Luminance settings were done in a similar fashion. First I compared a ppure white Photoshop document (on the monitor) to the intensity of a sheet of white printing paper displayed under my viewing light. With the monitor luminance set to the 85 cd/m2 range, the two documents look about the same brightness of white. I try to view my prints under "moderate" light levels rahter than ultra bright levels, since I know they won't be lit by spot or flood lights when placed on a wall. If you do have spots on your hung prints, there is a case to use a higher luminance level on your monitor. Anyway, on many LCDs, if you set the luminance too high, your blacks can start to look a little washed out. When set to about 85 cd, my tonal range in the print is a great match to my monitor. If I have the monitor luminance set to 100 or higher, I find that my prints look dark and muddy in comparison (unless viewed under unrealistically bright lights). So, a lot of trial and error, plus some initial brightness comparisons.
    Gamma is a tougher one. I have a special viewing target that I bring up in Photoshop (Lab based to prevent any possible conversions). When viewed in Photoshop at full magnification, it helps me to set the gamma, which affects mostly the midtone density. On my LCD, I found )again by trial and error) that 2.0 gave me the best tonal distribution. My old CRT worked best at 1.8 gamma, and other LCDs sometimes work best at other gamma settings, such as 2.2.
    The above settings work beautifully given my equipment, my viewing levels, ambient working conditions, etc. My monitor to print match is excellent from both a color and tonal range standpoint. Hope that helps clarify my thinking and approach.
    Lou

  • "Reader" will only display a PDF for one second, then suts down the PDF.

    I recently had an automatic update to "Reader" and now "Reader" will only display a PDF for about one second, then shuts down the PDF.  This happens to all PDFs no matter what the scource.  I am running Windows 7.  What do I need to do to correct the situation.  (Yes -- I deleted "Reader" from my computer, the re-installed it.  Didn't help.)

    Go to C/Programs/Adobe/Reader 11/Reader.
    Look for a file named eula.exe (or just eula).
    Double click it.
    Accept the license agreement.
    Reader should work fine from there.

  • Using usb modem in laptop:  best settings for one location

    Using VZAccess manager what are the best Options / Preference settings for a one location laptop ?
    Thank you
    fdleyda

    fdleyda wrote:
    Using VZAccess manager what are the best Options / Preference settings for a one location laptop ?
    Thank you
    fdleyda
    Hi fdleyda,
    Your USB device is designed to work best with VZAccess Manager default settings upon software installation, just make sure to have the latest software version available for your operating system, you can check for software updates at the above link. 
    If you encounter any connection issues in the future please contact our tech support department at 1-800-922-0204 and we'll be happy to further assist you. Please have your computer and USB device available for troubleshooting when you call us.

  • $DISPLAY stopped working for one user

    Have 3 secondary users that I use daily on this desktop, that runs Arch x86_64 up-to-date (systemd compatible). WM is i3-wm 4.3-2.
    As of today, USER2 can launch GUI applications, USER3 sudently can't.
    Can't see what configuration I could have edited (I barely touch those secondary users config files).
    First tho secondary users are allowed to use X with 'xhost +SI:localuser:<USER{2,3}>' in a startup script, so that I can launch various GUI apps.
    Both share the same groups (audio,video,...) beside their own peculiar group.
    Oh and a last one that is used for skype only (as per the wiki). It is launched with an alias:
    alias skype='xhost +local: && sudo -u skype /usr/bin/skype'
    Runs fine.
    Logged as USER3:
    $ echo $DISPLAY
    $ leafpad
    leafpad: Impossible d'ouvrir l'affichage:
    translation: "Can't open display: "
    Logged as primary User I typed successively:
    $ xhost +SI:localuser:<USER>
    $ xhost +localhost
    $ xhost +local:
    $ xhost + (access control disabled)
    None worked.
    As root:
    # export XAUTHORITY=~<USER>/.Xauthority
    Same thing than before :-o
    Note : I happened to shift from Nvidia to nouveau while I had this issue; same issue
    Only way I found atm is:
    $ sudo -u <USER> -H PROGRAM
    Which runs fine.
    Please have you got a clue where this might come from?
    Refs:
    [Solved] Cannot open display :0.0  https://bbs.archlinux.org/viewtopic.php?id=132532 with the 2 links that eirika provided.
    Running web browser as separate user?   https://bbs.archlinux.org/viewtopic.php … 8#p1058358
    Last edited by kozaki (2012-09-25 11:01:11)

    Follow-up
    Same issue happened after last update on my netbook, for both secondary users.
    /var/log/pacman.log
    [2012-09-26 13:31] Running 'pacman -S -u'
    [2012-09-26 13:31] starting full system upgrade
    [2012-09-26 13:32] removed eject (2.1.5-7)
    [2012-09-26 13:32] upgraded coreutils (8.17-3 -> 8.19-1)
    [2012-09-26 13:32] upgraded gtk-update-icon-cache (2.24.12-1 -> 2.24.13-1)
    [2012-09-26 13:32] upgraded gtk2 (2.24.12-1 -> 2.24.13-1)
    [2012-09-26 13:32] upgraded hwids (20120906-1 -> 20120922-1)
    [2012-09-26 13:32] upgraded ladspa (1.13-3 -> 1.13-4)
    [2012-09-26 13:32] upgraded libarchive (3.0.4-1 -> 3.0.4-2)
    [2012-09-26 13:32] upgraded libsigc++ (2.2.10-2 -> 2.2.11-1)
    [2012-09-26 13:32] upgraded mlocate (0.25-2 -> 0.26-1)
    [2012-09-26 13:32] upgraded procps-ng (3.3.3-3 -> 3.3.3-6)
    [2012-09-26 13:33] upgraded qt (4.8.3-2 -> 4.8.3-3)
    [2012-09-26 13:33] upgraded util-linux (2.21.2-5 -> 2.22-6)
    [2012-09-26 13:33] upgraded sysvinit-tools (2.88-7 -> 2.88-8)
    As far  I can remember I haven't edited any config file on that system for last month - other than power management related: cpupower, jupiter and kernel-netbook
    Problem hasn't changed on the desktop PC: $DISPLAY works fine with one secondary user, and not at all with the other. Have no clue as where it may comes from, so any advice would be much appreciated.

Maybe you are looking for

  • My iPhone caller image is still appearing full screen instead of in the right-hand corner,even though I've assigned the images to them on my mac.

    I had originally assigned images to my contacts through my iPhone which made them appear full screen when recieving/making a call, but now I want the images to appear in the top-right corner. I've assigned all new photos to override the old photos th

  • Incoming call and sms

    When i get incoming sms and call some contacts not show from contacts. All numbers described in external coding +(country code) local number. Anybody know whats the problem ? Solved! Go to Solution.

  • Insert to excel problem

    Hi all, i got a problem when using jsp to import some data to excel by importing org.apache.poi. Then, the excel contains macro , so when i use response.sendRedirect("xxx directory of the file xxx") to display that file, click enable the macro, the f

  • What are all the possible AIA faults?

    Hi all, I need to know what are all the possible AIA faults apart from the system faults provided by the SOA Suite. whether AIA faults are completely different from the system faults of soa suite?. I haven't found any specifically named AIA faults in

  • Is there a way to open image with another phogram outside photoshop?

    Hi i have cs6 and bridge cs6 ,windows 7 64bit is there a way to open images with another program then photoshop? for example a script or other ways? i'm talking about jpg,raw files for example for example i would like to send 4 photos to ptgui or oth