Windows 8.1 "No mapping between account names and security IDs was done"

Hi,
A week ago, I had a problem with my laptop in which the explorer.exe was restarting itself, when I was trying to fix it, I ran the Sfc/scannow, and it turns out, there were some files broken, then, following the instructions here of how to replace the files
manually, I get to the Command prompt, and used the command "takeown", but when continued to the "icacls" command, it shows the message:
"No mapping between account names and security IDs was done. Successfully processed 0 files; Failed processing 1 files."
I didn't understand what was that, and in the page didn't said anything about that message, I thought that the explorer.exe problem also corrupted this solution, in the end, turns out, it was a third party program which was incorrectly un-installed, I fixed
and forget about the other problem, until today when I was trying to open Word, when it turns out, that Office was "installing", something that doesn't make sense as I already had it installed and worked on it in the past. But when it's close to
the finish, it shows, Error 1920, and that I don't have the requeriment grants, later looking on the internet, there was this "solution" (since I couldn't test it, I don't know if it works) saying that I have to user the command "icacls",
but any time that I try, it says "No mapping between accounts..." therefore, I couldn't solve it that way.
I don't know what exactly to do, since I don't understand exactly what I broke, hope you can help me, and thanks in advance.

Hi,
According to your description, the current problem is your Office program.
If I am right, there is no any other problem on your system. It narrows down to the Microsoft Office program issue.
Please run with safe mode to troubleshoot:
1.Click WIN+R;
2.Type Winword.exe /safe;
3.Press Enter.
If the issue would be gone in safe mode, it indicates the issue is caused by add-ons, please disable the add-ons one by one to clarify which one is culprit.
If the issue still persists, go Office forum for further help:
http://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Meanwhile, I would like to suggest you use System Restore to roll back to a previous time when everything worked fine.
How to  refresh, reset, or restore your PC
http://windows.microsoft.com/en-IN/windows-8/restore-refresh-reset-pc
If I misunderstanding, please correct me.
Karen Hu
TechNet Community Support

Similar Messages

  • Group Policy won't apply, No mapping between account names and security IDs was done.

    I am using Group Policy Preferences to remove users from the local admin group and add a local admin account.  This GPO is working on 90% of the Win7 machines on the network, but three laptops are not accepting the GPO.  I get the following error:
    Log Name:      Application
    Source:        Group Policy Local Users and Groups
    Date:          6/24/2014 8:49:28 AM
    Event ID:      4098
    Task Category: (2)
    Level:         Warning
    Keywords:      Classic
    User:          SYSTEM
    Computer:      laptop1.internal.com
    Description:
    The user 'Administrators' preference item in the 'Local Admin Policy - Remove Permissions {593ACD77-3663-4023-BEB8-938D83F7862E}' Group Policy object did not apply because it failed with error code '0x80070534 No mapping between account names and security
    IDs was done.' This error was suppressed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Group Policy Local Users and Groups" />
        <EventID Qualifiers="34305">4098</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-24T13:49:28.000000000Z" />
        <EventRecordID>68771</EventRecordID>
        <Channel>Application</Channel>
        <Computer>laptop1.internal.com</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data>user</Data>
        <Data>Administrators</Data>
        <Data>Local Admin Policy - Remove Permissions {593ACD77-3663-4023-BEB8-938D83F7862E}</Data>
        <Data>0x80070534 No mapping between account names and security IDs was done.</Data>
      </EventData>
    </Event>
    I've searched high and low for an answer and nothing I find on-line seems to apply.  I also notice that the option to 'Run as Administrator' does not work.  If I right-click on cmd.exe and select 'run as administrator', the command box opens but
    I am not prompted for credentials and the command box does not have admin rights.  Not sure if this is related or not.
    Any help on this would be greatly appreciated.
    Thanks,
    Joe

    Hi,
    Delete your  remove action from the GPP and push it again, does this issue still occur?
    If it still exists, let’s collect the GPP log for analysis:
    Group policy Preference debug logging policy settings are located under:
    Computer Configuration\Administrative Templates\System\Group Policy
    Click Logging and tracing, select local users and group preference logging and trace.
    Meanwhile, just a similar issue, but it is worth trying:
    A user is added to the wrong group on a client computer that is running Windows 7 or Windows Server 2008 R2
    http://support.microsoft.com/kb/2280515
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • No mapping  between account names and security IDs was done

    I've to give access rights to some folders of server from client machine.
    But using prompt
    ECHO Y|CACLS S:\END /E /P 15dsd1s.DBSERVER\Administrator:F
    its showing me the error
    "No mapping between account names and security IDs was done."
    Kindly suggest some solution.

    I suggest that you post this question in a forum relevant to your operating system rather than a forum for Oracle Database management and usage questions.

  • No mapping between account names and security IDs was done. (Exception from HRESULT: 0x80070534)

    We are getting below error message in MOSS 2007 server, every few minutes.
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (9daf0827-7c85-41c7-82c5-89f93ecd652a).
    Reason: No mapping between account names and security IDs was done. (Exception from HRESULT: 0x80070534)
    Techinal Support Details:
    System.Runtime.InteropServices.COMException (0x80070534): No mapping between account names and security IDs was done. (Exception from HRESULT: 0x80070534)
    at Microsoft.Office.Server.Search.Administration.MSSITLB.IGatherApplication2.SetUsersPermittedToQuery(String[] psaAccountNames, Int32 fForce)
    at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
    at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Hi Baskaran,
    For this issue, I think the main reason may be the original account is removed or changed from AD.
    In the following there is an article about this to reset the service account, you can refer to it for more information:
    http://edinkapic.blogspot.com/2009/10/moss-shared-services-provider.html
    Additionally, as you already tried to reset the service accounts, you could try to clear SharePoint configuration caches in case the caches were not updated, to clear SharePoint configuration caches, you can see the below article:
    http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/b97c4721-b37e-4a4a-a8e2-4a98b4c7b89c
    More information:http://farhanfaiz.wordpress.com/2009/04/08/moss-2007-event-id-6482-6481/
    Thanks,
    Qiao
    Qiao Wei
    TechNet Community Support

  • No mapping between account IDs and security was done

    I upgraded to Windows 8.1, it blew up my SQL Server Developer installation. So I traveled 400 miles to get my DVD and reinstall SQl Server. I saw on th eforum that several people had similar problems and they said selecting the repair option of the installation
    would fix it. So I tried but I can't get past the "No mapping between account names and security IDs was done" error.
    I suspected the login to be the issue from the beginning because the *&$%^$ Windows 8.1 update forced me to enter a new password as it didn't find my old one acceptable. Problem is, it didn't update it everywhere and I can't find where to change it for
    SQL Server in this worthless version of an operating system.
    I can't find the login for SQL Server in the the computer services anymore, it's gone from there. I used to be able to go in and manually start the service and change the password. But that great 8.1 update wiped all of that out and left me sitting high
    and dry.
    Does anyone know of a solution? I need to finish this project and my hands are tied at this point.

    Unless you used your own Windows user as the service account for SQL Server, the password change should not matter.
    You talk about "Computer services". The place where to make changes to the SQL Server services is the SQL Server Configuration Manager.
    You say that the SQL Server installation blew up. Is SQL Server not running (you can check this in the Configuration Manager) at all, or is the problem that you cannot log in?
    I was considering to update a small netbook that has Windows 8 to 8.1 the other day, but to get the "free" update, I was told to go the Microsoft Store. I did that the other day from my Surface RT and that was highly unpleasant as it hi-jacked
    by user id and replaced with a Microsoft account. So I am not making that mistake again. I looked at getting Windows 8.1 from MSDN, but then decided it's not worth it for a machine I only use for vacation trips. (All machines that I use for serious work
    do of course run Windows 7.)
    Erland Sommarskog, SQL Server MVP, [email protected]

  • How to remove the link between Profile name and corp net account after their disassociation

    Hi there,
      How do I  remove the link between Profile name and corp net account after their disassociation ?
    I would like to make remove the link between 'Viv Lingaiah' and
    [email protected] Also, I would like to keep 'Viv Lingaiah' and associate with my outlook id and corpnet account.

    Logon to your live account here
    https://account.live.com/summarypage.aspx then under aliases you can add an alias and promote it to primary.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

    Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

    Why have 5 accounts if you need to access all of them.. just have one account?
    Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

  • What's the difference between "Full Name" and "Account Name"

    Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

    Your computer name by default would be "John David Appleseed's Macbook Pro"
    But you can always change that in System Preferences->Sharing
    And yes, the first account you set up will be an administrator.

  • I am trying to set up a genius bar appointment on my computer and it tells me "Sorry your session has expired. Please sign in again using your Apple ID account name and password" I know they are correct and use them to sign in on my phone.

    Hi I am trying to set a appointment for the Genus bar on my computer.  I know for a fact that my login is correct.  I have used it to sign in here and make a apointment (had to do it on my phone).  When I get to the appointment area it tells me to resign, and tells me "SORRY" Your lass session has expired.  Pleae sign in using your apple id account name and password.  I have tried resetting my password and all.  I am running Internet Explorer version 11 and my windows is 7.  Any help would be nice...

    ok.. I tried this three times and kept getting that access denied thing when I clicked post my questions. So now maybe I wont have to typ this a fifth time....
    I have a MAC computer with Sync. Was set up under sync Beta. I have an Android phone synced to it that was synced using the pair this device function. It works perfectly. I just got a new Android Tablet and am trying to add it to my sync and it does not seem to have the pair my device function. It insists I log into my sync account. So I try it and it tells me invalid userid/password. I verify and it is the exact email address userid that shows as being my sync account on the MAC. I verify the password on the MAC and it tests out fine. Try the tablet again and invalid.. So I try to reset my password on the tablet and am told my email address/account name does not exist. I just verified it AND Synced my MAC using it!! I have my recovery Key but there is no place to input it into the tablet. There is no place on tablet to enter the link device codes. How can my account be valid and in use on two devices but invalid and nonexistant on the new one? And How do I get the New one to sync with other two?

  • A table mapping between country code and currency code

    Hi experts,
    I want to know whether there is a table mapping between country code and currency code.I have found the table T005(Countries).But I don't why the filed of WAERS(Country currency) hasn't maintained in talbe T005?Whether country code and currency code hasn't direct relation?
    Regards,
    Kelvin

    Dear Kelvin
    The said field (WAERS) can be fetched from many tables.  To name a few, below are some of the tables in which, you can see the field for currency.
    1)  BKKI4
    2)  BKKI5
    3)  BWPOS
    4)  KNKA
    5)  KNVV
    6)  MSEG
    thanks
    G. Lakshmipathi

  • Cost in simulation not consistent between accounting column and cost assign

    When doing simulation on a trip report that has cash advanced used included  I get a inconsistency between
    accounting column and trip cost statement in the simulation window.
    In the accouting column in simulation, the cash advance used is included as a part a total cost but when I look at trip cost statement that value is not included as an expense to be transferred.
    This seems a bit strange to me.
    Any suggestions?

    Hi,
    Following could have a reason.
    On travel request you may had checked on  Cash Office column while requesting advance...
    How to resolve it..
    You cannot change advance so you have to do following thing.
    1) Enter the same amount in negative along WITH checked on  Cash Office column ..
    2) Enter New amount WITHOUT check on cash office.
    then run again simulation..
    I hope it would serve your purpose...
    Regards,
    Muhammad Umer

  • Unable to verify account name and password

    I cant seem to integrate my twitter account on my macbook, when i try to login it says "unable to verify account name and password".
    Help Please???
    Thank You.

    Try this, it worked for me:
    System Preferences --> Mail, Contacts, & Calendars --> Remove your Twitter account by clicking on the at the bottom of the left hand pane in the window.
    Go to your Twitter account and under your Settings --> Apps, revoke access to OS X Integration and click 'Save'.
    Return to your System Preferences where you removed your account and attempt to add the account again. After you enter your @username and password, attempt to use the app in the notification window.
    It fixed the problem for me and even gave access to the OS X Integration back to my apps on my Twitter account.
    Prior to this, the Mail, Contacts, & Calendars would tell me that it was 'Unable to verify account username and password'. Very frustrating.
    I hope this helps you!

  • Changed account name and old music files no longer can play

    I changed my account name to an e-mail address that I currently use. since I moved the old one I could no longer access any longer. Well they have a feature to do that so I took it so it would be easier to remember the account and password. thing is since I changed none of the songs that I purchased with the old account name can be played any longer. they need to be Reauthorized.
    No biggie right just type in the old account name and password and I'll be on my way. Wrong :P
    According to the music store the old account does not exist. Well of course not that is because I changed it. I check to see my account history under the NEW account and it has all the files I ever downloaded since I first installed iTunes! If this is the case why on earth can I not play the files purchased under my old account under the new accounts name! did I make a mistake by not deauthroizing my computer before changing account? because it is not mentioned in the instructions to do so! Grrr... normally I'd just say oh well but it's most of my iTunes library!
    Pleas help!

    Problem Resolved!
    I was sent back an e-mail stating that I did not make a second account but changed my account name from (accounts will be withheld for security) one to the other. Problem?
    Files downloaded from the other account name would not work with the one that I was currently using.
    Issues further complicating the matter. My computer recently was having Power supply issues and I reformated my computer several times. Not realizing that this left iTunes Music store saying that I had 5 computers authorized on my account because I had not deauthorized any of the computers each time. Couldn't really, windows crashed out and I couldn't get to it. So when I got everything ironed out on my computer. I couldn't play any of my songs becaus I had reached maximum authorizations! even Deauthorizing and reauthorizing didn't work.
    Solution:: Login to your (working) account and go to your account summary. Click on the button that says "Deauthorize ALL computers" This will wipe all computers that you had associated with your account to play your songs. Not that big of deal because all you have to do is log back in. (BIG deal to ppl that don't know your password, which they shouldn't be playing yoru songs anyway!)
    Once I resetted my authorization on all computers and logged back in everything was fine.
    Now I think the tech that sent me the e-mail did do one thing for me. He must have enabled my old account I used to have and linked it to my current one. Because instead of my old account saying it does not exist it says it works now! yet I still login to and access my account with my new e-mail account!
    So even though I would like to say everything was within my power to do myself the whole time. That is not the case. The tech did help me associate the two accounts from withing iTunes. So I can now listen to my songs at anytime I want and not be told I have 5+ computers when I only own 2 LOL

  • Mapping between send port and host instance

    I am not able to retrieve send port names according to host instance names using C#.NET (WMI) from BizTalkMgmtDb. I had tried using BTSCatalog-Send Port class and MSBTS_SendPort but couldn't get the desired output. Can anyone help me out with the mapping between
    send port and host instance?
    Thanks in advance.

    Hi Pratibha,
    BtsCatalogExplorer's SendPort collection doesn't provide access to its corresponding SendHandler/host-Instance name. Only option is to relay on executing the SQL query against the BizTalkMgmtDb. So you can create a C# execute the query as show by la Cour.
    Following uses the BtsCatalogExplorer. but as said, there is no option to retrieve its corresponding SendHandler/host-Instance.
    private string GetSendPorts()
    // connect to the local BizTalk Management database
    Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer catalog = new Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer();
    catalog.ConnectionString = "Server=VMBTS2013R2DEV;Initial Catalog=BizTalkMgmtDb;Integrated Security=SSPI;";
    string sSendPortName = String.Empty;
    try
    // display all sendports and status
    foreach (Microsoft.BizTalk.ExplorerOM.SendPort sendport in catalog.SendPorts)
    sSendPortName += sendport.Name + ", ";
    MessageBox.Show(sSendPortName);
    catch (Exception e)
    catalog.DiscardChanges();
    throw e;
    return sSendPortName;
    Send-Port class doesn't have member to retrieve the send handler, but provides one to Set the send handler:
    http://msdn.microsoft.com/en-us/library/microsoft.biztalk.explorerom.sendport.aspx
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • I can no longer use my aol on mac mail. When I set up the aol account name and password I get a message that says "Unable to verify account name or password". This is on all my Apple devices. Seems like an AOL server issue but no help from them!

    I can no longer make my AOL e mail work with Mac Mail on all my devices. When I try to set up the account and put in the correct aol account and password I get the message "Unable to verify account name or password". I know the account name and password is correct as I can open the AOL e mail page on Safari. I have changed the password, and it still does not work. AOL tech support has been no help. AOL email worked for years but last week due to suspected spam activity AOL locked my AOL account. I got that straightened out but now i cannot set it up on any of my devices: Macbook Air, Ipad, I pad mini and iPhone 6 without that message. I took everything to Apple store and everything is set up correctly on my devices. AOL tech support is no help and keeps giving me different solutions and answers, none of which has worked. Any solutions out there? All my Apple Software is up to date on all my devices

    Delete your Gmail account from the Mail/Contacts/Calendars settings page, and then add it back in using the new Gmail password.
    Matt

Maybe you are looking for

  • Reg sending mail attachment

    Hi, im working on sending report output as mail attachment in pdf format.. but im not getting the required output,,,i.e., even after entering email addresses in the selection screen....im not getting any mail to the respective mail-ids.. im pasting t

  • Order creation logic how to pass line items

    experts i have the following data in iternal table itab. po number ,customer number, matnr,quantity ,order date. 1212838383  7494749  8383938833   20  20032009 1212838383  7494749  8383938832   10  20032009 1212838382  7494749  8383938833   20  20032

  • Error "file not compatible"

    When I open my psd file I get the following error "Could not complete your request because the file is not compatible with this version of Photoshop elements" I am using PE 11. I was working on the file yesterday and everything was good. I saved it a

  • Process KPI extraction from BPM to BW possible? Is there content available?

    Hallo I have a question concerning BPM. Does anybody know if there is standard content and/or an extractor to retrieve BPM Process Data from the CE 7.1? I am looking for something similar as the SAP Workflow extractor and/or data model. Does someone

  • Score tutorial

    Hey- Any recommendations for a score tutorial? At present, I write short warmups weekly for my choir (TTBB) and try to produce mini scores (sometimes only a few measures) and apply what I'm reading in notation as well as experimenting etc. I do reali