Windows 8.1 pro and VPN client 5.0.07.0290-k9
We are using windows 8.1 pro in our dell brand desktop. Our users access the client machine through vpn. We are using VPN client version 5.0.07.0290-k9.
That is working fine.
Issue:
I have a Cisco router RV325. I am Configured Easy vpn in my router.Then i am using the same cisco vpn client and the same OS.
Result is not getting ping. but vpn is connected good.
I'm no expert, but do you have ICMP allowed in your tunnel?
Similar Messages
-
Windows 8.1 pro and vpn client issue
dear support community ,
Am using windows 8.1 pro and cisco vpn client version 5.0.0.7.0410
.my issue is that am able to connect to the VPN succesfully but when connected i cant ping nodes inside the VPN
whereas when i do the same test with a windows 7 and xp PCs , am able to ping and even remote desktop nodes.
someone help please ??funniest thing is , after using my PC for two weeks and doing regular updates , am now able to ping and RDP to nodes
inside the VPN..:-) -
Installing VPN Client 5.0.07.0290 on Win 7 Pro 64 bit error 1720
Trying to install Cisco VPN client 5.0.07.0290 on new and clear Win 7 Pro 64 bit, I get error 1720. There is a problem with this Windows Installer Package.A script required for this install to complete could not be run.
I contacted Cisco support and they can´t help me yet. I am pretty desperate, been trying to get this done for a long time.
Somebody knows if perhaps any version of AnyConnect could help me?
Thanks in advance.
GuidoHello,
We came across the same issues. A system engineer found a site to change the MSI and after that we were able to install and distribute for 64bit systems.
http://blog.edwards-research.com/2009/09/ciscovpn-client-32-bit-vista-error-1720/
Regards,
Michael Heer -
Hello. We are evaluating Windows Vista along with the VPN Client version 5.0.01.0600. Many of our VPN users are reporting that they are experiencing problems connecting VPN to the ASA 5520 firewall. We are experiencing the same problems with error such as "Reason 418: Unable to configure the firewall software." Also in the client's log we see:
3 08:11:49.845 08/07/07 Sev=Warning/2 IKE/0xE3000086
Invalid concentrator firewall configuration.
Is anyone else experiencing this problem and is there a workaround? Thanks in advance.Fyi - I ended up opening up a TAC case for this (SR 606571713) and received the following information from the engineer:
"Either disable the firewall check on for that group on the VPN appliance or clear a custom DLL check looking for the Microsoft Firewall DLLS or use an alternative Firewall that is supported on Vista and by the VPN appliance.
CPP pushes will not work for any other Firewalls other then ZoneLabs, if or when ZoneLabs releases ZoneAlarm for Vista customers can install this to get CPP support.
For more reference on this BUG please go to the following link :
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi26229&Submit=Search
Note:This feature is not enabled because we are still waiting for the patch from ZoneLab for Vista vpn client." -
I have just updated my computer to windows 8.1 pro and i dont see adobe acrobat pro x1
i have just updated my computer to windows 8.1 pro and i dont see adobe acrobat pro x1
Download CS3 products
Mylenium -
Windows 8 Pro 64bit, eToken (Aladdin with newest Safenet etoken-Client V 8.2.85.0) Pro (V.with Cisco Systems VPN Client Version 5.0.07.0440 -> VPN Error-Log :
VPN-Client Responding : Reason 403: Unable to contact the security gateway...
(Detailled VPN-Error-Log see attached)
Thanks in advance for any ideas or solution, its getting urgent !!First, try TheGreenBow's online troubleshooter. If that doesn't work, you can try their general support or simply contact them directly.
-
Windows 8.1 pro pptp vpn does not show disconnect option
I just installed Windows 8.1 PRO on my PC.
Formatted it, installed right from scratch.
Once I created my login, I then created a connection to my office VPN server.
Office VPN server is a ISA server which allows PPTP based VPN.
Well, I am able to connect and do everything that I want.
But I dont see a DISCONNECT option at all.
The metro interface after the connection is made also does not show status as "connected". It shows "connect" instead.
If you go to network and sharing center and then into adapter settings you can see you VPN connection. but the "status" column does not show "connected" but instead shows the same name of the vpn connection as seen in the "Name"
column!!
Right clicking that active connection does not show "disconnect", but shows "connect/disconnect".
Then I realized that after double clicking that VPN connection you can then see the status window, where a disconnect button does exists and clicking that does disconnect the VPN.
But this is crazy.
Why do we now have to go so deep, just to disconnect!
This never happens in windows 7, windows 7 with SP1, Windows 8
This is new to Windows 8.1
Anyone else seen this? Is there a solution ?
konkaniI just installed Windows 8.1 PRO on my PC.
Formatted it, installed right from scratch.
Once I created my login, I then created a connection to my office VPN server.
Office VPN server is a ISA server which allows PPTP based VPN.
Well, I am able to connect and do everything that I want.
But I dont see a DISCONNECT option at all.
The metro interface after the connection is made also does not show status as "connected". It shows "connect" instead.
If you go to network and sharing center and then into adapter settings you can see you VPN connection. but the "status" column does not show "connected" but instead shows the same name of the vpn connection as seen in the "Name" column!!
Right clicking that active connection does not show "disconnect", but shows "connect/disconnect".
Then I realized that after double clicking that VPN connection you can then see the status window, where a disconnect button does exists and clicking that does disconnect the VPN.
But this is crazy.
Why do we now have to go so deep, just to disconnect!
This never happens in windows 7, windows 7 with SP1, Windows 8
This is new to Windows 8.1
Anyone else seen this? Is there a solution ?
konkani
BUMP!
konkani -
Mapping Drives using a PIX501 and vpn client
We have a 501 and are using cisco vpn client. We have a Windows 2000 and a windows 2003 server on the network we are connecting to. We use windows authentication when we logon the vpn. We are mapping drives on both servers onto the client. The mapped drives on the 2000 server are visable to the client. The mapped drives on the 2003 server are not even when we try to remap. We have Routing and Remote Access enabled on the 2003 server but still fail to map the drives (or ping the 2003 server). Can anyone out there shed any light on our problem. Thanks
Start with this link which gives a number of examples on how to configure a VPN client with the VPN 3000 -
http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html#anchor22
Jon -
Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA. -
Vpn configuration problems 2621xm and vpn client
hello,
I'm trying to configure my home cisco 2621xm to accept vpn connections. I've used many cisco pdf documents and they all same almost the same so I've done my configuration using these documents.
now I just can't get past this error message I'm getting and I have no idea why this is happening.
any ideas to help me get past this step, I'm really stuck here.
also, I've tried vpn client version 5 and 4.8
cisco ios version is:
Cisco IOS Software, C2600 Software (C2600-ADVIPSERVICESK9-M), Version 12.4(16), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 20-Jun-07 05:48 by prod_rel_team
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
vision-router-01 uptime is 2 hours, 53 minutes
System returned to ROM by power-on
System image file is "flash:c2600-advipservicesk9-mz.124-16.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 2621XM (MPC860P) processor (revision 1.0) with 127308K/3764K bytes of memory.
Processor board ID JAD06350FM7
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
32K bytes of NVRAM.
49152K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
here is my the config that's vpn related
aaa authentication login MYTAC group tacacs+ local enable
aaa authorization network GROUPAUTHOR local
username someuser password 0 somepassword
crypto isakmp policy 5
encr aes 256
authentication pre-share
group 2
crypto isakmp keepalive 10 periodic
crypto isakmp client configuration group VTELVPN
key cisco123
dns 192.168.10.5
domain xyz.com
pool VTELVPNPOOL
crypto ipsec transform-set VTELSET1 esp-aes esp-sha-hmac
crypto dynamic-map VTELDYNAMAP 10
set transform-set VTELSET1
set identity thisrouter-01
reverse-route
crypto map VTELCLIENTMAP client authentication list MYTAC
crypto map VTELCLIENTMAP isakmp authorization list GROUPAUTOHOR
crypto map VTELCLIENTMAP client configuration address respond
crypto map VTELCLIENTMAP 10 ipsec-isakmp dynamic VTELDYNAMAP
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
no cdp enable
ppp chap hostname xxxxxx
ppp chap password 7 hahahahohoho
ppp pap sent-username xxxxxx password 7 hahahahohoho
crypto map VTELCLIENTMAP
ip local pool VTELVPNPOOL 192.168.6.3 192.168.6.254Hi
Can you try assigning a static ip to the dialer interface and try checking out the vpn connectivity ?
regds -
Windows 8.1 Pro and hppiw.exe
Hi,
I'm trying to install on my new PC (Windows 8.1 Pro 64bit) the drivers needed to use an Officejet Pro K850 printer installed on our LAN.
From HP website I downloaded hppiw.exe as suggested but I cannot make it run.
After double-click it starts to look for devices and then suddenly exits without any alert.
Windows Event Viewer shows 2 new entries:
Application error: 1000
Exeption code: 0xc0000005
Offset error 0x0000196b
Windows Error Reporting
Bucket errato -498820676, tipo 1
Nome evento: APPCRASH
Risposta: Non disponibile
ID CAB: 0
Firma problema:
P1: hppiw.exe
P2: 3.1.0.19
P3: 521742c3
P4: hppiw.exe
P5: 3.1.0.19
P6: 521742c3
P7: c0000005
P8: 0000196b
My Lenovo laptop every day tells me it found a new printer (K850) but when I try to install it it says I don't have any driver for that.
Any hint to solve the problem?
ThanksHi @Lucas-BS
There is no full feature software and driver for Windows 8 let alone 8.1. You can try an in-OS driver. Please take a look at the instructions for Windows 8, they may help even though you have 8.1; Install a Windows 8 Driver with Windows Update.
I hope this helps.
If you still can not get the printer to work with your computer, I suggest calling us. we might be able to get you a discount on a newer model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Windows Server - Oracle 9i and Linux Client ?
Hi all,
Is it possible to have Oracle Database working on Windows 2000 Server and its client i.e. forms/application running on Linux environment. If so, then will my Developer6i work for installation of client in Linux. And if it works, then how can I install it on Linux.
Or theres any other version of Developer for Linux.
My configuration is as under.
Server.
OS - Windows 2000 Server
DB - Oracle 9i
Client.
OS - Linux
Developer 6i -how can I install n make it work for me ?
Thanx
Zaaf.Zaaf,
This forum deals with Connectivity solutions to non-Oracle systems. Your question would be best posted on the general iAS forum. -
Web based VPN issue wheras anyconnect and VPN client working fine
Experts,
We have Cisco ASA 5540 and im running into issues with accessing the webbased VPN(https://X.X.x.x).there are about 8 VPN profiles configured and im unable to login using any of the profiles whereas VPN client and Cisco Any connect are working fine. on accessing web based VPN after providing the login credentials and hit enter the page is getting refreshed and it throws me back to the same login page again. This is the Production ASA and i cannot run debug.
Kindly, provide me your valuable inputs.
Thank you!Your problem is the NAT-config. First, the following line is not needed as RDP doesn't work ober UDP:
ip nat inside source static udp 192.168.10.136 3389 interface Dialer0 3389
Then, the following command causes the problems:
ip nat inside source static tcp 192.168.10.136 3389 interface Dialer0 3389
With that the router assumes that the server 192.168.10.136 should always be reached through the IP of dialer0 and does a translation.
There are a couple of ways to resolve the problem, but they all have some drawbacks ...
1) Only access the server through VPN. For that you just delete the NAT-statement above (the one with tcp) and you should be able to reach the server through the VPN.
2) Restrict the NAT to don't do a translation if a VPN-peer is accessing the server.
For that you need to attach a route-map to the NAT-statement. But that won't work with the "interface"-keyword in the NAT-Statement. But you can use this if you get a fixed IP from your provider.
3) Assign a second IP to the RDP-server. The original IP which is used in the NAT-statement is used for accessing the server without the VPN, the second IP is used for accessing the server through VPN.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
PIX version 6.3 and VPN Client
I have an old PIX, running version 6.3. Its version cannot be upgraded due to hardware limitation.
I am setting up IPSEC VPN, with split-tunnel disabled.
However, the client was not able to connect to Internet.
Below is part of the configuration.
ip local pool internetvpn1 10.30.11.1-10.30.11.7
vpngroup internetvpn1address-pool internetvpn1
vpngroup internetpub1 dns-server 123.4.5.6
vpngroup internetpub1 idle-time 86400
vpngroup internetpub1 password *********
I can login to VPN Client, but when I do nslookup, PIX will show log as below
110001: No route to 123.4.5.6 from 10.30.11.1
110001: No route to 123.4.5.6 from 10.30.11.1
Anybody have any idea?I just found out that in version 6.x, traffic cannot pass through when the security level are the same.
For VPN Client, user traffic came from outside interface.
If split-tunneling is disabled and user want to access Internet, it has to go out from outside interface as well.
As "same-security-traffic permit inter-interface" is not available in 6.x, it become impossilbe for VPN client to access Internet, when split-tunneling is disabled.
Am I correct? -
Can't connect to work server (windows) on MacBook Pro through VPN - via router
Due to the nature of my job now, I am working remotely.
The IT department hooked me up with a MacBook Pro that connects to our work server, which I know is Windows-based, via a VPN. The VPN connects just fine; however, when I go to connect to the server—it doesn't find it. It gives me:
The server “dc03” may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
Interestingly enough, the first time I used it (at Starbucks, then McDonald's) it worked, but at home it wouldn't. We isolated the issue to the router, since I could do it when plugged in, but no one could figure out what kind of settings were different or weird. I went to the store and bought 2 other routers. One worked, the Linksys, but the Belkin did. WHAT? So the cheaper one worked? This was the easiest solution, because still don't know the bottom line: why?
Now, a local spot in town that I frequent—one that used to allow me to connect to my work server—changed routers (the "newest, fastest" AVIS). So now, I cannot connect and get that same message.
My IT guys are stumped. I don't personally know enough about this side of technology to be of any use.
Does anyone have any idea what's going on?What is the make & model of the new wireless router that you ISP has provided you? Are you able to administer it if needed?
For the MacBook Pro, try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)
Maybe you are looking for
-
S540: Video card got warm, case bent
I was working on a WebGL application, then my laptop (I assume it's the video card) got pretty warm. Temperature monitor said it got about 75 degrees Celsius, which should be fine. NOT! My laptop bent... the right front corner (with the little ThinkP
-
APro9 has not worked from the initial install of CS5 and not even a brand new computer (Core i5 3.1 GHz) and new OS (10.7.1) or reinstalls have made a difference in fixing it. Nor have all the tedious updates from 9.0 through 9.46 done a thing. And t
-
In my project, I build a dialog box. I build a JTabbedPane within. Each tab is a panel with JChecxBox. When I add my first panel using the method addTab() no problem, with my second panel still no problem. When I try adding a third, an exception occu
-
Ein Problem welches mich zur Zeit mal wieder mal in den Wahnsinn treibt. Seit Stunden versuche ich eine Möglichkeit zu finden einen Text aus Acrobat zu exportieren (oder kopieren). In Acrobat (Proessional 7) sieht alles noch schön aus.Der Text wird r
-
When is the new photo app coming out
when is the new photo app coming out? I have iPhoto, will it be wise to quit using it?